spi: stm32-ospi: Set DMA maxburst dynamically

Set src_maxburst and dst_maxburst dynamically from DMA
capabilities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20251208-upstream_qspi_ospi_updates-v2-1-62526c9467dc@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-stm32-ospi.c b/drivers/spi/spi-stm32-ospi.c
index f36fd36da269221689c4bbc36933f0fae0dfc845..d733e37f0435f867b60c015cafc1e3b508f0171a 100644 (file)
--- a/drivers/spi/spi-stm32-ospi.c
+++ b/drivers/spi/spi-stm32-ospi.c
@@ -278,10 +278,19 @@ static irqreturn_t stm32_ospi_irq(int irq, void *dev_id)
        return IRQ_HANDLED;
 }
 
-static void stm32_ospi_dma_setup(struct stm32_ospi *ospi,
-                        struct dma_slave_config *dma_cfg)
+static int stm32_ospi_dma_setup(struct stm32_ospi *ospi,
+                               struct dma_slave_config *dma_cfg)
 {
+       struct dma_slave_caps caps;
+       int ret = 0;
+
        if (dma_cfg && ospi->dma_chrx) {
+               ret = dma_get_slave_caps(ospi->dma_chrx, &caps);
+               if (ret)
+                       return ret;
+
+               dma_cfg->src_maxburst = caps.max_burst / dma_cfg->src_addr_width;
+
                if (dmaengine_slave_config(ospi->dma_chrx, dma_cfg)) {
                        dev_err(ospi->dev, "dma rx config failed\n");
                        dma_release_channel(ospi->dma_chrx);
@@ -290,6 +299,12 @@ static void stm32_ospi_dma_setup(struct stm32_ospi *ospi,
        }
 
        if (dma_cfg && ospi->dma_chtx) {
+               ret = dma_get_slave_caps(ospi->dma_chtx, &caps);
+               if (ret)
+                       return ret;
+
+               dma_cfg->dst_maxburst = caps.max_burst / dma_cfg->dst_addr_width;
+
                if (dmaengine_slave_config(ospi->dma_chtx, dma_cfg)) {
                        dev_err(ospi->dev, "dma tx config failed\n");
                        dma_release_channel(ospi->dma_chtx);
@@ -298,6 +313,8 @@ static void stm32_ospi_dma_setup(struct stm32_ospi *ospi,
        }
 
        init_completion(&ospi->dma_completion);
+
+       return ret;
 }
 
 static int stm32_ospi_tx_mm(struct stm32_ospi *ospi,
@@ -899,9 +916,9 @@ static int stm32_ospi_probe(struct platform_device *pdev)
        dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        dma_cfg.src_addr = ospi->regs_phys_base + OSPI_DR;
        dma_cfg.dst_addr = ospi->regs_phys_base + OSPI_DR;
-       dma_cfg.src_maxburst = 4;
-       dma_cfg.dst_maxburst = 4;
-       stm32_ospi_dma_setup(ospi, &dma_cfg);
+       ret = stm32_ospi_dma_setup(ospi, &dma_cfg);
+       if (ret)
+               return ret;
 
        mutex_init(&ospi->lock);