]> git.ipfire.org Git - thirdparty/hostap.git/commitdiff
Provide more details of WPA3 modes in hostapd.conf
authorJouni Malinen <jouni@codeaurora.org>
Wed, 1 Aug 2018 14:51:42 +0000 (17:51 +0300)
committerJouni Malinen <j@w1.fi>
Wed, 1 Aug 2018 14:51:42 +0000 (17:51 +0300)
Clarify that wpa=2 (i.e., RSN) is used for WPA3 and list previously
undocumented wpa_key_mgmt values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
hostapd/hostapd.conf

index 0de4b856965b0d110f0b327c04b089f552162ed4..70f9713d39f4957136170958c2462b20aefb08fb 100644 (file)
@@ -1239,7 +1239,10 @@ own_ip_addr=127.0.0.1
 # and/or WPA2 (full IEEE 802.11i/RSN):
 # bit0 = WPA
 # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
-#wpa=1
+# Note that WPA3 is also configured with bit1 since it uses RSN just like WPA2.
+# In other words, for WPA3, wpa=2 is used the configuration (and
+# wpa_key_mgmt=SAE for WPA3-Personal instead of wpa_key_mgmt=WPA-PSK).
+#wpa=2
 
 # WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
 # secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
@@ -1268,10 +1271,23 @@ own_ip_addr=127.0.0.1
 # Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
 # entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
 # added to enable SHA256-based stronger algorithms.
+# WPA-PSK = WPA-Personal / WPA2-Personal
+# WPA-PSK-SHA256 = WPA2-Personal using SHA256
+# WPA-EAP = WPA-Enterprise / WPA2-Enterprise
+# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256
+# SAE = SAE (WPA3-Personal)
+# WPA-EAP-SUITE-B-192 = WPA3-Enterprise with 192-bit security/CNSA suite
+# FT-PSK = FT with passphrase/PSK
+# FT-EAP = FT with EAP
+# FT-EAP-SHA384 = FT with EAP using SHA384
+# FT-SAE = FT with SAE
 # FILS-SHA256 = Fast Initial Link Setup with SHA256
 # FILS-SHA384 = Fast Initial Link Setup with SHA384
 # FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256
 # FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384
+# OWE = Opportunistic Wireless Encryption (a.k.a. Enhanced Open)
+# DPP = Device Provisioning Protocol
+# OSEN = Hotspot 2.0 online signup with encryption
 # (dot11RSNAConfigAuthenticationSuitesTable)
 #wpa_key_mgmt=WPA-PSK WPA-EAP