* autogen.sh: New file.
* INSTALL: Remove from version control.
* Makefile.in: Likewise.
* aclocal.m4: Likewise.
* config.guess: Likewise.
* config.sub: Likewise.
* configure: Likewise.
* depcomp: Likewise.
* docs/Makefile.in: Likewise.
* docs/mdate-sh: Likewise.
* docs/texinfo.tex: Likewise.
* grub/Makefile.in: Likewise.
* install-sh: Likewise.
* lib/Makefile.in: Likewise.
* missing: Likewise.
* mkinstalldirs: Likewise.
* netboot/Makefile.in: Likewise.
* stage1/Makefile.in: Likewise.
* stage2/Makefile.in: Likewise.
* util/Makefile.in: Likewise.
+2010-01-21 Robert Millan <rmh@aybabtu.com>
+
+ * autogen.sh: New file.
+
+ * INSTALL: Remove from version control.
+ * Makefile.in: Likewise.
+ * aclocal.m4: Likewise.
+ * config.guess: Likewise.
+ * config.sub: Likewise.
+ * configure: Likewise.
+ * depcomp: Likewise.
+ * docs/Makefile.in: Likewise.
+ * docs/mdate-sh: Likewise.
+ * docs/texinfo.tex: Likewise.
+ * grub/Makefile.in: Likewise.
+ * install-sh: Likewise.
+ * lib/Makefile.in: Likewise.
+ * missing: Likewise.
+ * mkinstalldirs: Likewise.
+ * netboot/Makefile.in: Likewise.
+ * stage1/Makefile.in: Likewise.
+ * stage2/Makefile.in: Likewise.
+ * util/Makefile.in: Likewise.
+
2010-01-21 Robert Millan <rmh@aybabtu.com>
* configure.ac: Add AM_PROG_AS (to fix automake generation).
+++ /dev/null
--*- Text -*-
-
-This is the GRUB. Welcome.
-
-This file contains instructions for compiling and installing the GRUB.
-
-The Requirements
-================
-
-GRUB depends on some software packages installed into your system. If
-you don't have any of them, please obtain and install them before
-configuring the GRUB.
-
-* GCC
-
- Probably every recent GCC should work, but we recommend GCC 2.95 and
- later, since you can create smaller binary images. See the web page
- <http://gcc.gnu.org/>.
-
-* GNU Make
-
- For now, the Makefiles produced by Automake depends on GNU Make. See
- the web page <http://www.gnu.org/software/make/make.html>.
-
-* GNU binutils 2.9.1.0.23 or later
-
- Binutils has changed the behavior of 16bit assembler between 2.9.1
- and 2.9.1.0.x, and we support only 2.9.1.0.x and higher. In
- particular, we recommend using binutils 2.10, since it is the only
- public release that supports real 16bit mode. Please take a look at
- the web page <http://sourceware.cygnus.com/binutils/>, for more
- information. Note that you don't have to install it into any system
- directory. See the section "Operation Controls", if you want to
- install binutils into your own directory.
-
-If you'd like to develop GRUB, these below are also required. Don't
-forget to specify the option `--enable-maintainer-mode' when running the
-configure script.
-
-* Texinfo 4.0 or later
-
- We use some new macros in the documents, so you need a recent
- Texinfo release. See the web page
- <http://www.gnu.org/software/texinfo/texinfo.html>.
-
-* Developers: GNU Autoconf 2.5x and GNU Automake 1.7 or later
-
- You should not need Automake just to compile GRUB, but you will need
- it if you edit any of the build files (Makefile.am, configure.in,
- etc). We use the new "per-executable flags" feature found in the
- latest release of automake. See the web page
- <http://www.gnu.org/software/automake/automake.html>.
-
-
-Configuring the GRUB
-====================
-
-The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a
-file `config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-If you need to do unusual things to compile the package, please try to
-figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-
-Building the GRUB
-=================
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and
- type `./configure' to configure the package for your system. If
- you're using `csh' on an old version of System V, you might need
- to type `sh ./configure' instead to prevent `csh' from trying to
- execute `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. `cd' to the directory where you want the object files
-and executables to go and run the `configure' script. `configure'
-automatically checks for the source code in the directory that
-`configure' is in and in `..'.
-
-
-Installation Names
-==================
-
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix by giving `configure' the option `--prefix=PATH'.
-
-You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If
-you give `configure' the option `--exec-prefix=PATH', the package will
-use PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for
-particular kinds of files. Run `configure --help' for a list of the
-directories you can set and what kinds of files go in them.
-
-If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure'
-the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Please note, however, that the GRUB knows where it is located in the
-filesystem. If you have installed it in an unusual location, the
-system might not work properly, or at all. The chief utility of these
-options for the GRUB is to allow you to "install" in some alternate
-location, and then copy these to the actual root filesystem later.
-
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-
-Operation Controls
-==================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--enable-maintainer-mode'
- Enable make rules and dependencies not useful (and sometimes
- confusing) to the casual installer. If you are a GRUB developer,
- it is a good idea to specify this option.
-
-`--disable-ext2fs'
- Omit the ext2fs support in Stage 2.
-
-`--disable-fat'
- Omit the FAT support in Stage 2.
-
-`--disable-ffs'
- Omit the FFS support in Stage 2.
-
-`--disable-minix'
- Omit the Minix fs support in Stage 2.
-
-`--disable-reiserfs'
- Omit the ReiserFS support in Stage 2.
-
-`--disable-vstafs'
- Omit the VSTa filesystem support in Stage 2.
-
-`--disable-jfs'
- Omit the JFS support in Stage 2.
-
-`--disable-xfs'
- Omit the XFS support in Stage 2.
-
-`--disable-ufs2'
- Omit the UFS2 support in Stage 2.
-
-`--disable-iso9660'
- Omit the ISO9660 support in Stage 2.
-
-`--disable-gunzip'
- Omit the decompression support in Stage 2.
-
-`--disable-md5-password'
- Omit the MD5 password support in Stage2.
-
-`--with-binutils=PATH'
- Search the path PATH to find binutils. If you have installed your
- binutils executables into an unusual location where GCC doesn't
- search by default, use this option.
-
-`--without-curses'
- Don't use the curses library.
-
-`--disable-hercules'
- Omit the hercules console support in Stage 2.
-
-`--disable-serial'
- Omit the serial terminal support in Stage 2.
-
-`--enable-serial-speed-simulation'
- Simulate the slowness of a serial device in the grub shell. This
- option is useful for GRUB developers, as you can test the
- performance of a terminal emulation even on pseudo terminals.
-
-`--enable-preset-menu=FILE'
- Preset a menu file FILE in Stage 2. This is useful, if you cannot
- put a configuration file on a filesystem for some reason (e.g. when
- you need to set the default terminal to a serial terminal in an
- embedded system).
-
-`--enable-example-kernel'
- Build the example Multiboot kernel in the directory "docs". You
- will be able to boot the image "kernel" with GRUB.
-
-`--disable-auto-linux-mem-opt'
- Don't pass the "mem=" option automatically, when booting Linux.
- You can also disable the feature at run time.
-
-
-`configure' also accepts several options for the network support. See
-the file `netboot/README.netboot', for more information.
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
- THANKS TODO compile config.guess config.sub depcomp install-sh \
- missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-# Do not change this order if you don't know what you are doing.
-AUTOMAKE_OPTIONS = 1.7 gnu
-SUBDIRS = netboot stage2 stage1 lib grub util docs
-EXTRA_DIST = BUGS MAINTENANCE
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/util
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-recursive ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
- dist-tarZ dist-zip distcheck distclean distclean-generic \
- distclean-hdr distclean-recursive distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# generated automatically by aclocal 1.9.4 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# -*- Autoconf -*-
-# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.4])])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 6
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# serial 7 -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 11
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# -*- Autoconf -*-
-# Copyright (C) 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# -*- Autoconf -*-
-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# AM_PROG_INSTALL_STRIP
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([acinclude.m4])
--- /dev/null
+#!/bin/sh
+set -ex
+
+aclocal
+autoconf
+autoheader
+automake -a -c -f
+
+exit 0
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
-timestamp='2004-11-12'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amd64:OpenBSD:*:*)
- echo x86_64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- cats:OpenBSD:*:*)
- echo arm-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- luna88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:MirBSD:*:*)
- echo powerppc-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit 0 ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:[34]*)
- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit 0 ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit 0 ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit 0 ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit 0 ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit 0 ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- *86) UNAME_PROCESSOR=i686 ;;
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit 0 ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms && exit 0 ;;
- I*) echo ia64-dec-vms && exit 0 ;;
- V*) echo vax-dec-vms && exit 0 ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
-timestamp='2004-11-30'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
- kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | msp430 \
- | ns16k | ns32k \
- | openrisc | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | msp430-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16c)
- basic_machine=cr16c-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- or32 | or32-*)
- basic_machine=or32-unknown
- os=-coff
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for GRUB 0.97.
-#
-# Report bugs to <bug-grub@gnu.org>.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME='GRUB'
-PACKAGE_TARNAME='grub'
-PACKAGE_VERSION='0.97'
-PACKAGE_STRING='GRUB 0.97'
-PACKAGE_BUGREPORT='bug-grub@gnu.org'
-
-ac_unique_file="stage2/stage2.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
- fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures GRUB 0.97 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
- cat <<_ACEOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of GRUB 0.97:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --disable-ext2fs disable ext2fs support in Stage 2
- --disable-fat disable FAT support in Stage 2
- --disable-ffs disable FFS support in Stage 2
- --disable-ufs2 disable UFS2 support in Stage 2
- --disable-minix disable Minix fs support in Stage 2
- --disable-reiserfs disable ReiserFS support in Stage 2
- --disable-vstafs disable VSTa FS support in Stage 2
- --disable-jfs disable IBM JFS support in Stage 2
- --disable-xfs disable SGI XFS support in Stage 2
- --disable-iso9660 disable ISO9660 support in Stage 2
- --disable-gunzip disable decompression in Stage 2
- --disable-md5-password disable MD5 password support in Stage 2
- --disable-packet-retransmission
- turn off packet retransmission
- --enable-pci-direct access PCI directly instead of using BIOS
- --enable-3c509 enable 3Com509 driver
- --enable-3c529 enable 3Com529 driver
- --enable-3c595 enable 3Com595 driver
- --enable-3c90x enable 3Com90x driver
- --enable-cs89x0 enable CS89x0 driver
- --enable-davicom enable Davicom driver
- --enable-depca enable DEPCA and EtherWORKS driver
- --enable-eepro enable Etherexpress Pro/10 driver
- --enable-eepro100 enable Etherexpress Pro/100 driver
- --enable-epic100 enable SMC 83c170 EPIC/100 driver
- --enable-3c507 enable 3Com507 driver
- --enable-exos205 enable EXOS205 driver
- --enable-ni5210 enable Racal-Interlan NI5210 driver
- --enable-lance enable Lance PCI PCNet/32 driver
- --enable-ne2100 enable Novell NE2100 driver
- --enable-ni6510 enable Racal-Interlan NI6510 driver
- --enable-natsemi enable NatSemi DP8381x driver
- --enable-ni5010 enable Racal-Interlan NI5010 driver
- --enable-3c503 enable 3Com503 driver
- --enable-ne enable NE1000/2000 ISA driver
- --enable-ns8390 enable NE2000 PCI driver
- --enable-wd enable WD8003/8013, SMC8216/8416 driver
- --enable-otulip enable old Tulip driver
- --enable-rtl8139 enable Realtek 8139 driver
- --enable-sis900 enable SIS 900 and SIS 7016 driver
- --enable-sk-g16 enable Schneider and Koch G16 driver
- --enable-smc9000 enable SMC9000 driver
- --enable-tiara enable Tiara driver
- --enable-tulip enable Tulip driver
- --enable-via-rhine enable Rhine-I/II driver
- --enable-w89c840 enable Winbond W89c840, Compex RL100-ATX driver
- --enable-3c503-shmem use 3c503 shared memory mode
- --enable-3c503-aui use AUI by default on 3c503 cards
- --enable-compex-rl2000-fix
- specify this if you have a Compex RL2000 PCI
- --enable-smc9000-scan=LIST
- probe for SMC9000 I/O addresses using LIST
- --enable-ne-scan=LIST probe for NE base address using LIST
- --enable-wd-default-mem=MEM
- set the default memory location for WD/SMC
- --enable-cs-scan=LIST probe for CS89x0 base address using LIST
- --enable-diskless enable diskless support
- --disable-hercules disable hercules terminal support
- --disable-serial disable serial terminal support
- --enable-serial-speed-simulation
- simulate the slowness of a serial device
- --enable-preset-menu=FILE
- preset a menu file FILE in Stage 2
- --enable-example-kernel
- build the example Multiboot kernel
- --disable-auto-linux-mem-opt
- don't pass Linux mem= option automatically
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-binutils=DIR search the directory DIR to find binutils
- --without-curses do not use curses
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <bug-grub@gnu.org>.
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\_ACEOF
-GRUB configure 0.97
-generated by GNU Autoconf 2.59
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by GRUB $as_me 0.97, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-}
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- sed "/^$/d" confdefs.h | sort
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- ac_config_headers="$ac_config_headers config.h"
-
-am__api_version="1.9"
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL=$ac_install_sh
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,$program_prefix,;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$AWK" && break
-done
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='grub'
- VERSION='0.97'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- STRIP=$ac_ct_STRIP
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
- { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
- ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
- ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-
-case "$host_cpu" in
-i[3456]86) host_cpu=i386 ;;
-x86_64) host_cpu=x86_64 ;;
-*) { { echo "$as_me:$LINENO: error: unsupported CPU type" >&5
-echo "$as_me: error: unsupported CPU type" >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-
-
-
-
-#
-# Options
-#
-
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
- enableval="$enable_maintainer_mode"
- USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
-fi;
- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
-
-
-if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-if test "x$enable_maintainer_mode" = xyes; then
- # Extract the first word of "perl", so it can be a program name with args.
-set dummy perl; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PERL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $PERL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-
-if test -n "$PERL"; then
- echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- if test -z "$PERL"; then
- { { echo "$as_me:$LINENO: error: perl not found" >&5
-echo "$as_me: error: perl not found" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# This should be checked before AC_PROG_CC
-if test "x$CFLAGS" = x; then
- default_CFLAGS=yes
-fi
-
-if test "x$host_cpu" = xx86_64; then
- CFLAGS="-m32 $CFLAGS"
-fi
-
-#
-# Programs
-#
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CC" && break
-done
-
- CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
- ;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
- break;;
- * )
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
- *)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
- ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-# We need this for older versions of Autoconf.
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-CCAS="$CC"
-
-
-
-# Check whether --with-binutils or --without-binutils was given.
-if test "${with_binutils+set}" = set; then
- withval="$with_binutils"
-
-fi;
-
-if test "x$with_binutils" != x; then
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $RANLIB in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RANLIB="$RANLIB" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_dummy=""$with_binutils:$PATH""
-for as_dir in $as_dummy
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_RANLIB="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_RANLIB" && ac_cv_path_RANLIB=":"
- ;;
-esac
-fi
-RANLIB=$ac_cv_path_RANLIB
-
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-else
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- RANLIB=$ac_ct_RANLIB
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-fi
-
-# optimization flags
-if test "x$ac_cv_c_compiler_gnu" = xyes; then
- if test "x$default_CFLAGS" = xyes; then
- # Autoconf may set CFLAGS to -O2 and/or -g. So eliminate them.
- CFLAGS="`echo $CFLAGS | sed -e 's/-g//g' -e 's/-O[0-9]//g'` -g"
- # If the user specify the directory for binutils, add the option `-B'.
- if test "x$with_binutils" != x; then
- CFLAGS="-B$with_binutils/ $CFLAGS"
- fi
- STAGE1_CFLAGS="-O2"
- GRUB_CFLAGS="-O2"
-
-echo "$as_me:$LINENO: checking whether optimization for size works" >&5
-echo $ECHO_N "checking whether optimization for size works... $ECHO_C" >&6
-if test "${size_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- saved_CFLAGS=$CFLAGS
- CFLAGS="-Os -g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- size_flag=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-size_flag=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS=$saved_CFLAGS
-
-fi
-echo "$as_me:$LINENO: result: $size_flag" >&5
-echo "${ECHO_T}$size_flag" >&6
- if test "x$size_flag" = xyes; then
- STAGE2_CFLAGS="-Os"
- else
- STAGE2_CFLAGS="-O2 -fno-strength-reduce -fno-unroll-loops"
- fi
- # OpenBSD has a GCC extension for protecting applications from
- # stack smashing attacks, but GRUB doesn't want this feature.
- echo "$as_me:$LINENO: checking whether gcc has -fno-stack-protector" >&5
-echo $ECHO_N "checking whether gcc has -fno-stack-protector... $ECHO_C" >&6
-if test "${no_stack_protector_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- saved_CFLAGS=$CFLAGS
- CFLAGS="-fno-stack-protector"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- no_stack_protector_flag=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-no_stack_protector_flag=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS=$saved_CFLAGS
-
-fi
-echo "$as_me:$LINENO: result: $no_stack_protector_flag" >&5
-echo "${ECHO_T}$no_stack_protector_flag" >&6
- if test "x$no_stack_protector_flag" = xyes; then
- STAGE2_CFLAGS="$STAGE2_CFLAGS -fno-stack-protector"
- fi
- fi
-fi
-
-
-
-
-
-# Enforce coding standards.
-CPPFLAGS="$CPPFLAGS -Wall -Wmissing-prototypes -Wunused -Wshadow"
-CPPFLAGS="$CPPFLAGS -Wpointer-arith"
-
-echo "$as_me:$LINENO: checking whether -Wundef works" >&5
-echo $ECHO_N "checking whether -Wundef works... $ECHO_C" >&6
-if test "${undef_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- saved_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="-Wundef"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- undef_flag=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-undef_flag=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CPPFLAGS="$saved_CPPFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $undef_flag" >&5
-echo "${ECHO_T}$undef_flag" >&6
-
-# The options `-falign-*' are supported by gcc 3.0 or later.
-# Probably it is sufficient to only check for -falign-loops.
-echo "$as_me:$LINENO: checking whether -falign-loops works" >&5
-echo $ECHO_N "checking whether -falign-loops works... $ECHO_C" >&6
-if test "${falign_loop_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
- saved_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="-falign-loops=1"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- falign_loop_flag=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-falign_loop_flag=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- CPPFLAGS="$saved_CPPFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $falign_loop_flag" >&5
-echo "${ECHO_T}$falign_loop_flag" >&6
-
-# Force no alignment to save space.
-if test "x$falign_loop_flag" = xyes; then
- CPPFLAGS="$CPPFLAGS -falign-jumps=1 -falign-loops=1 -falign-functions=1"
-else
- CPPFLAGS="$CPPFLAGS -malign-jumps=1 -malign-loops=1 -malign-functions=1"
-fi
-
-if test "x$undef_flag" = xyes; then
- CPPFLAGS="$CPPFLAGS -Wundef"
-fi
-
-# Check if build ID can be disabled in the linker
-echo "$as_me:$LINENO: checking whether linker accepts \`--build-id=none'" >&5
-echo $ECHO_N "checking whether linker accepts \`--build-id=none'... $ECHO_C" >&6
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS -Wl,--build-id=none"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- build_id_flag=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-build_id_flag=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $build_id_flag" >&5
-echo "${ECHO_T}$build_id_flag" >&6
-LDFLAGS="$save_LDFLAGS"
-if test "x$build_id_flag" = xyes; then
- LDFLAGS="$LDFLAGS -Wl,--build-id=none"
-fi
-
-if test "x$with_binutils" != x; then
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OBJCOPY in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OBJCOPY="$OBJCOPY" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_dummy=""$with_binutils:$PATH""
-for as_dir in $as_dummy
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OBJCOPY="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-OBJCOPY=$ac_cv_path_OBJCOPY
-
-if test -n "$OBJCOPY"; then
- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-echo "${ECHO_T}$OBJCOPY" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-else
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-OBJCOPY=$ac_cv_prog_OBJCOPY
-if test -n "$OBJCOPY"; then
- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-echo "${ECHO_T}$OBJCOPY" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_OBJCOPY"; then
- ac_ct_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_OBJCOPY"; then
- ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJCOPY="objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
-if test -n "$ac_ct_OBJCOPY"; then
- echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
-echo "${ECHO_T}$ac_ct_OBJCOPY" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- OBJCOPY=$ac_ct_OBJCOPY
-else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
-fi
-
-fi
-
-# Defined in acinclude.m4.
-
-echo "$as_me:$LINENO: checking if C symbols get an underscore after compilation" >&5
-echo $ECHO_N "checking if C symbols get an underscore after compilation... $ECHO_C" >&6
-if test "${grub_cv_asm_uscore+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat > conftest.c <<\EOF
-int
-func (int *list)
-{
- *list = 0;
- return *list;
-}
-EOF
-
-if { ac_try='${CC-cc} ${CFLAGS} -S conftest.c'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } && test -s conftest.s; then
- true
-else
- { { echo "$as_me:$LINENO: error: ${CC-cc} failed to produce assembly code" >&5
-echo "$as_me: error: ${CC-cc} failed to produce assembly code" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-if grep _func conftest.s >/dev/null 2>&1; then
- grub_cv_asm_uscore=yes
-else
- grub_cv_asm_uscore=no
-fi
-
-rm -f conftest*
-fi
-
-
-if test "x$grub_cv_asm_uscore" = xyes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_ASM_USCORE $grub_cv_asm_uscore
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_asm_uscore" >&5
-echo "${ECHO_T}$grub_cv_asm_uscore" >&6
-
-echo "$as_me:$LINENO: checking whether ${OBJCOPY} works for absolute addresses" >&5
-echo $ECHO_N "checking whether ${OBJCOPY} works for absolute addresses... $ECHO_C" >&6
-if test "${grub_cv_prog_objcopy_absolute+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat > conftest.c <<\EOF
-void
-cmain (void)
-{
- *((int *) 0x1000) = 2;
-}
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest.o; then :
-else
- { { echo "$as_me:$LINENO: error: ${CC-cc} cannot compile C source code" >&5
-echo "$as_me: error: ${CC-cc} cannot compile C source code" >&2;}
- { (exit 1); exit 1; }; }
-fi
-grub_cv_prog_objcopy_absolute=yes
-for link_addr in 2000 8000 7C00; do
- if { ac_try='${CC-cc} ${CFLAGS} ${LDFLAGS} -nostdlib -Wl,-N -Wl,-Ttext -Wl,$link_addr conftest.o -o conftest.exec'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then :
- else
- { { echo "$as_me:$LINENO: error: ${CC-cc} cannot link at address $link_addr" >&5
-echo "$as_me: error: ${CC-cc} cannot link at address $link_addr" >&2;}
- { (exit 1); exit 1; }; }
- fi
- if { ac_try='${OBJCOPY-objcopy} -O binary conftest.exec conftest'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then :
- else
- { { echo "$as_me:$LINENO: error: ${OBJCOPY-objcopy} cannot create binary files" >&5
-echo "$as_me: error: ${OBJCOPY-objcopy} cannot create binary files" >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test ! -f conftest.old || { ac_try='cmp -s conftest.old conftest'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- mv -f conftest conftest.old
- else
- grub_cv_prog_objcopy_absolute=no
- break
- fi
-done
-rm -f conftest*
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_prog_objcopy_absolute" >&5
-echo "${ECHO_T}$grub_cv_prog_objcopy_absolute" >&6
-if test "x$grub_cv_prog_objcopy_absolute" != xyes; then
- { { echo "$as_me:$LINENO: error: GRUB requires a working absolute objcopy; upgrade your binutils" >&5
-echo "$as_me: error: GRUB requires a working absolute objcopy; upgrade your binutils" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking whether addr32 must be in the same line as the instruction" >&5
-echo $ECHO_N "checking whether addr32 must be in the same line as the instruction... $ECHO_C" >&6
-if test "${grub_cv_asm_prefix_requirement+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat > conftest.s <<\EOF
- .code16
-l1: addr32 movb %al, l1
-EOF
-
-if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } && test -s conftest.o; then
- grub_cv_asm_prefix_requirement=yes
-else
- grub_cv_asm_prefix_requirement=no
-fi
-
-rm -f conftest*
-fi
-
-
-if test "x$grub_cv_asm_prefix_requirement" = xyes; then
- grub_tmp_addr32="addr32"
- grub_tmp_data32="data32"
-else
- grub_tmp_addr32="addr32;"
- grub_tmp_data32="data32;"
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define ADDR32 $grub_tmp_addr32
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define DATA32 $grub_tmp_data32
-_ACEOF
-
-
-echo "$as_me:$LINENO: result: $grub_cv_asm_prefix_requirement" >&5
-echo "${ECHO_T}$grub_cv_asm_prefix_requirement" >&6
-
-
-
-echo "$as_me:$LINENO: checking for .code16 addr32 assembler support" >&5
-echo $ECHO_N "checking for .code16 addr32 assembler support... $ECHO_C" >&6
-if test "${grub_cv_asm_addr32+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat > conftest.s.in <<\EOF
- .code16
-l1: @ADDR32@ movb %al, l1
-EOF
-
-if test "x$grub_cv_asm_prefix_requirement" = xyes; then
- sed -e s/@ADDR32@/addr32/ < conftest.s.in > conftest.s
-else
- sed -e s/@ADDR32@/addr32\;/ < conftest.s.in > conftest.s
-fi
-
-if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } && test -s conftest.o; then
- grub_cv_asm_addr32=yes
-else
- grub_cv_asm_addr32=no
-fi
-
-rm -f conftest*
-fi
-
-
-echo "$as_me:$LINENO: result: $grub_cv_asm_addr32" >&5
-echo "${ECHO_T}$grub_cv_asm_addr32" >&6
-if test "x$grub_cv_asm_addr32" != xyes; then
- { { echo "$as_me:$LINENO: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils" >&5
-echo "$as_me: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking whether an absolute indirect call/jump must not be prefixed with an asterisk" >&5
-echo $ECHO_N "checking whether an absolute indirect call/jump must not be prefixed with an asterisk... $ECHO_C" >&6
-if test "${grub_cv_asm_absolute_without_asterisk+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat > conftest.s <<\EOF
- lcall *(offset)
-offset:
- .long 0
- .word 0
-EOF
-
-if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } && test -s conftest.o; then
- grub_cv_asm_absolute_without_asterisk=no
-else
- grub_cv_asm_absolute_without_asterisk=yes
-fi
-
-rm -f conftest*
-fi
-
-
-if test "x$grub_cv_asm_absolute_without_asterisk" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define ABSOLUTE_WITHOUT_ASTERISK 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_asm_absolute_without_asterisk" >&5
-echo "${ECHO_T}$grub_cv_asm_absolute_without_asterisk" >&6
-
-
-echo "$as_me:$LINENO: checking if start is defined by the compiler" >&5
-echo $ECHO_N "checking if start is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_start_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl start")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_start_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_start_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_start_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_START_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_start_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_start_symbol" >&6
-
-
-echo "$as_me:$LINENO: checking if _start is defined by the compiler" >&5
-echo $ECHO_N "checking if _start is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_uscore_start_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl _start")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_uscore_start_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_uscore_start_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_uscore_start_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_USCORE_START_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_uscore_start_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_uscore_start_symbol" >&6
-
-if test "x$grub_cv_check_start_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_start_symbol" != "xyes"; then
- { { echo "$as_me:$LINENO: error: Neither start nor _start is defined" >&5
-echo "$as_me: error: Neither start nor _start is defined" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking if __bss_start is defined by the compiler" >&5
-echo $ECHO_N "checking if __bss_start is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_uscore_uscore_bss_start_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl __bss_start")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_uscore_uscore_bss_start_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_uscore_uscore_bss_start_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_uscore_uscore_bss_start_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_USCORE_USCORE_BSS_START_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_uscore_uscore_bss_start_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_uscore_uscore_bss_start_symbol" >&6
-
-
-echo "$as_me:$LINENO: checking if _edata is defined by the compiler" >&5
-echo $ECHO_N "checking if _edata is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_uscore_edata_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl _edata")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_uscore_edata_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_uscore_edata_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_uscore_edata_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_USCORE_EDATA_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_uscore_edata_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_uscore_edata_symbol" >&6
-
-
-echo "$as_me:$LINENO: checking if edata is defined by the compiler" >&5
-echo $ECHO_N "checking if edata is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_edata_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl edata")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_edata_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_edata_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_edata_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_EDATA_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_edata_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_edata_symbol" >&6
-
-if test "x$grub_cv_check_uscore_uscore_bss_start_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_edata_symbol" != "xyes" \
- -a "x$grub_cv_check_edata_symbol" != "xyes"; then
- { { echo "$as_me:$LINENO: error: None of __bss_start, _edata, edata defined" >&5
-echo "$as_me: error: None of __bss_start, _edata, edata defined" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking if end is defined by the compiler" >&5
-echo $ECHO_N "checking if end is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_end_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl end")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_end_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_end_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_end_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_END_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_end_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_end_symbol" >&6
-
-
-echo "$as_me:$LINENO: checking if _end is defined by the compiler" >&5
-echo $ECHO_N "checking if _end is defined by the compiler... $ECHO_C" >&6
-if test "${grub_cv_check_uscore_end_symbol+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-asm ("incl _end")
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- grub_cv_check_uscore_end_symbol=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-grub_cv_check_uscore_end_symbol=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-
-if test "x$grub_cv_check_uscore_end_symbol" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_USCORE_END_SYMBOL 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: result: $grub_cv_check_uscore_end_symbol" >&5
-echo "${ECHO_T}$grub_cv_check_uscore_end_symbol" >&6
-
-if test "x$grub_cv_check_end_symbol" != "xyes" \
- -a "x$grub_cv_check_uscore_end_symbol" != "xyes"; then
- { { echo "$as_me:$LINENO: error: Neither end nor _end is defined" >&5
-echo "$as_me: error: Neither end nor _end is defined" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# Check for curses libraries.
-
-# Check whether --with-curses or --without-curses was given.
-if test "${with_curses+set}" = set; then
- withval="$with_curses"
-
-fi;
-
-# Get the filename or the whole disk and open it.
-# Known to work on NetBSD.
-echo "$as_me:$LINENO: checking for opendisk in -lutil" >&5
-echo $ECHO_N "checking for opendisk in -lutil... $ECHO_C" >&6
-if test "${ac_cv_lib_util_opendisk+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lutil $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char opendisk ();
-int
-main ()
-{
-opendisk ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_util_opendisk=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_util_opendisk=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_util_opendisk" >&5
-echo "${ECHO_T}$ac_cv_lib_util_opendisk" >&6
-if test $ac_cv_lib_util_opendisk = yes; then
- GRUB_LIBS="$GRUB_LIBS -lutil"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_OPENDISK 1
-_ACEOF
-
-fi
-
-
-# Unless the user specify --without-curses, check for curses.
-if test "x$with_curses" != "xno"; then
- echo "$as_me:$LINENO: checking for wgetch in -lncurses" >&5
-echo $ECHO_N "checking for wgetch in -lncurses... $ECHO_C" >&6
-if test "${ac_cv_lib_ncurses_wgetch+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncurses $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char wgetch ();
-int
-main ()
-{
-wgetch ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_ncurses_wgetch=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ncurses_wgetch=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_wgetch" >&5
-echo "${ECHO_T}$ac_cv_lib_ncurses_wgetch" >&6
-if test $ac_cv_lib_ncurses_wgetch = yes; then
- GRUB_LIBS="$GRUB_LIBS -lncurses"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBCURSES 1
-_ACEOF
-
-else
- echo "$as_me:$LINENO: checking for wgetch in -lcurses" >&5
-echo $ECHO_N "checking for wgetch in -lcurses... $ECHO_C" >&6
-if test "${ac_cv_lib_curses_wgetch+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcurses $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char wgetch ();
-int
-main ()
-{
-wgetch ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_curses_wgetch=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_curses_wgetch=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_curses_wgetch" >&5
-echo "${ECHO_T}$ac_cv_lib_curses_wgetch" >&6
-if test $ac_cv_lib_curses_wgetch = yes; then
- GRUB_LIBS="$GRUB_LIBS -lcurses"
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBCURSES 1
-_ACEOF
-
-fi
-
-fi
-
-fi
-
-
-
-# Check for headers.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-
-
-for ac_header in string.h strings.h ncurses/curses.h ncurses.h curses.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
- # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------- ##
-## Report this to bug-grub@gnu.org ##
-## ------------------------------- ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-# Check for user options.
-
-# filesystems support.
-# Check whether --enable-ext2fs or --disable-ext2fs was given.
-if test "${enable_ext2fs+set}" = set; then
- enableval="$enable_ext2fs"
-
-fi;
-
-if test x"$enable_ext2fs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_EXT2FS=1"
-fi
-
-# Check whether --enable-fat or --disable-fat was given.
-if test "${enable_fat+set}" = set; then
- enableval="$enable_fat"
-
-fi;
-
-if test x"$enable_fat" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FAT=1"
-fi
-
-# Check whether --enable-ffs or --disable-ffs was given.
-if test "${enable_ffs+set}" = set; then
- enableval="$enable_ffs"
-
-fi;
-
-if test x"$enable_ffs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FFS=1"
-fi
-
-# Check whether --enable-ufs2 or --disable-ufs2 was given.
-if test "${enable_ufs2+set}" = set; then
- enableval="$enable_ufs2"
-
-fi;
-
-if test x"$enable_ufs2" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_UFS2=1"
-fi
-
-# Check whether --enable-minix or --disable-minix was given.
-if test "${enable_minix+set}" = set; then
- enableval="$enable_minix"
-
-fi;
-
-if test x"$enable_minix" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_MINIX=1"
-fi
-
-# Check whether --enable-reiserfs or --disable-reiserfs was given.
-if test "${enable_reiserfs+set}" = set; then
- enableval="$enable_reiserfs"
-
-fi;
-
-if test x"$enable_reiserfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_REISERFS=1"
-fi
-
-# Check whether --enable-vstafs or --disable-vstafs was given.
-if test "${enable_vstafs+set}" = set; then
- enableval="$enable_vstafs"
-
-fi;
-
-if test x"$enable_vstafs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_VSTAFS=1"
-fi
-
-# Check whether --enable-jfs or --disable-jfs was given.
-if test "${enable_jfs+set}" = set; then
- enableval="$enable_jfs"
-
-fi;
-
-if test x"$enable_jfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_JFS=1"
-fi
-
-# Check whether --enable-xfs or --disable-xfs was given.
-if test "${enable_xfs+set}" = set; then
- enableval="$enable_xfs"
-
-fi;
-
-if test x"$enable_xfs" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_XFS=1"
-fi
-
-# Check whether --enable-iso9660 or --disable-iso9660 was given.
-if test "${enable_iso9660+set}" = set; then
- enableval="$enable_iso9660"
-
-fi;
-
-if test x"$enable_iso9660" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_ISO9660=1"
-fi
-
-
-# Check whether --enable-gunzip or --disable-gunzip was given.
-if test "${enable_gunzip+set}" = set; then
- enableval="$enable_gunzip"
-
-fi;
-
-if test x"$enable_gunzip" = xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DNO_DECOMPRESSION=1"
-fi
-
-# Check whether --enable-md5-password or --disable-md5-password was given.
-if test "${enable_md5_password+set}" = set; then
- enableval="$enable_md5_password"
-
-fi;
-if test "x$enable_md5_password" != xno; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DUSE_MD5_PASSWORDS=1"
-fi
-
-# Check whether --enable-packet-retransmission or --disable-packet-retransmission was given.
-if test "${enable_packet_retransmission+set}" = set; then
- enableval="$enable_packet_retransmission"
-
-fi;
-if test "x$enable_packet_retransmission" != xno; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1"
-fi
-
-# Check whether --enable-pci-direct or --disable-pci-direct was given.
-if test "${enable_pci_direct+set}" = set; then
- enableval="$enable_pci_direct"
-
-fi;
-if test "x$enable_pci_direct" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONFIG_PCI_DIRECT=1"
-fi
-
-# Check whether --enable-3c509 or --disable-3c509 was given.
-if test "${enable_3c509+set}" = set; then
- enableval="$enable_3c509"
-
-fi;
-if test "x$enable_3c509" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C509"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c509.o"
-fi
-
-# Check whether --enable-3c529 or --disable-3c529 was given.
-if test "${enable_3c529+set}" = set; then
- enableval="$enable_3c529"
-
-fi;
-if test "x$enable_3c529" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C529=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c529.o"
-fi
-
-# Check whether --enable-3c595 or --disable-3c595 was given.
-if test "${enable_3c595+set}" = set; then
- enableval="$enable_3c595"
-
-fi;
-if test "x$enable_3c595" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C595=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c595.o"
-fi
-
-# Check whether --enable-3c90x or --disable-3c90x was given.
-if test "${enable_3c90x+set}" = set; then
- enableval="$enable_3c90x"
-
-fi;
-if test "x$enable_3c90x" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C90X=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c90x.o"
-fi
-
-# Check whether --enable-cs89x0 or --disable-cs89x0 was given.
-if test "${enable_cs89x0+set}" = set; then
- enableval="$enable_cs89x0"
-
-fi;
-if test "x$enable_cs89x0" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_CS89X0=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS cs89x0.o"
-fi
-
-# Check whether --enable-davicom or --disable-davicom was given.
-if test "${enable_davicom+set}" = set; then
- enableval="$enable_davicom"
-
-fi;
-if test "x$enable_davicom" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DAVICOM=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS davicom.o"
-fi
-
-# Check whether --enable-depca or --disable-depca was given.
-if test "${enable_depca+set}" = set; then
- enableval="$enable_depca"
-
-fi;
-if test "x$enable_depca" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DEPCA=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS depca.o"
-fi
-
-# Check whether --enable-eepro or --disable-eepro was given.
-if test "${enable_eepro+set}" = set; then
- enableval="$enable_eepro"
-
-fi;
-if test "x$enable_eepro" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro.o"
-fi
-
-# Check whether --enable-eepro100 or --disable-eepro100 was given.
-if test "${enable_eepro100+set}" = set; then
- enableval="$enable_eepro100"
-
-fi;
-if test "x$enable_eepro100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro100.o"
-fi
-
-# Check whether --enable-epic100 or --disable-epic100 was given.
-if test "${enable_epic100+set}" = set; then
- enableval="$enable_epic100"
-
-fi;
-if test "x$enable_epic100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EPIC100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS epic100.o"
-fi
-
-# Check whether --enable-3c507 or --disable-3c507 was given.
-if test "${enable_3c507+set}" = set; then
- enableval="$enable_3c507"
-
-fi;
-if test "x$enable_3c507" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C507=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c507.o"
-fi
-
-# Check whether --enable-exos205 or --disable-exos205 was given.
-if test "${enable_exos205+set}" = set; then
- enableval="$enable_exos205"
-
-fi;
-if test "x$enable_exos205" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EXOS205=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS exos205.o"
-fi
-
-# Check whether --enable-ni5210 or --disable-ni5210 was given.
-if test "${enable_ni5210+set}" = set; then
- enableval="$enable_ni5210"
-
-fi;
-if test "x$enable_ni5210" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5210=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5210.o"
-fi
-
-# Check whether --enable-lance or --disable-lance was given.
-if test "${enable_lance+set}" = set; then
- enableval="$enable_lance"
-
-fi;
-if test "x$enable_lance" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_LANCE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS lance.o"
-fi
-
-# Check whether --enable-ne2100 or --disable-ne2100 was given.
-if test "${enable_ne2100+set}" = set; then
- enableval="$enable_ne2100"
-
-fi;
-if test "x$enable_ne2100" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE2100=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne2100.o"
-fi
-
-# Check whether --enable-ni6510 or --disable-ni6510 was given.
-if test "${enable_ni6510+set}" = set; then
- enableval="$enable_ni6510"
-
-fi;
-if test "x$enable_ni6510" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI6510=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni6510.o"
-fi
-
-# Check whether --enable-natsemi or --disable-natsemi was given.
-if test "${enable_natsemi+set}" = set; then
- enableval="$enable_natsemi"
-
-fi;
-if test "x$enable_natsemi" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NATSEMI=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS natsemi.o"
-fi
-
-# Check whether --enable-ni5010 or --disable-ni5010 was given.
-if test "${enable_ni5010+set}" = set; then
- enableval="$enable_ni5010"
-
-fi;
-if test "x$enable_ni5010" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5010=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5010.o"
-fi
-
-# Check whether --enable-3c503 or --disable-3c503 was given.
-if test "${enable_3c503+set}" = set; then
- enableval="$enable_3c503"
-
-fi;
-if test "x$enable_3c503" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C503=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c503.o"
-fi
-
-# Check whether --enable-ne or --disable-ne was given.
-if test "${enable_ne+set}" = set; then
- enableval="$enable_ne"
-
-fi;
-if test "x$enable_ne" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne.o"
-fi
-
-# Check whether --enable-ns8390 or --disable-ns8390 was given.
-if test "${enable_ns8390+set}" = set; then
- enableval="$enable_ns8390"
-
-fi;
-if test "x$enable_ns8390" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NS8390=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns8390.o"
-fi
-
-# Check whether --enable-wd or --disable-wd was given.
-if test "${enable_wd+set}" = set; then
- enableval="$enable_wd"
-
-fi;
-if test "x$enable_wd" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_WD=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS wd.o"
-fi
-
-# Check whether --enable-otulip or --disable-otulip was given.
-if test "${enable_otulip+set}" = set; then
- enableval="$enable_otulip"
-
-fi;
-if test "x$enable_otulip" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_OTULIP=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS otulip.o"
-fi
-
-# Check whether --enable-rtl8139 or --disable-rtl8139 was given.
-if test "${enable_rtl8139+set}" = set; then
- enableval="$enable_rtl8139"
-
-fi;
-if test "x$enable_rtl8139" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_RTL8139=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS rtl8139.o"
-fi
-
-# Check whether --enable-sis900 or --disable-sis900 was given.
-if test "${enable_sis900+set}" = set; then
- enableval="$enable_sis900"
-
-fi;
-if test "x$enable_sis900" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SIS900=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS sis900.o"
-fi
-
-# Check whether --enable-sk-g16 or --disable-sk-g16 was given.
-if test "${enable_sk_g16+set}" = set; then
- enableval="$enable_sk_g16"
-
-fi;
-if test "x$enable_sk_g16" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SK_G16=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS sk_g16.o"
-fi
-
-# Check whether --enable-smc9000 or --disable-smc9000 was given.
-if test "${enable_smc9000+set}" = set; then
- enableval="$enable_smc9000"
-
-fi;
-if test "x$enable_smc9000" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SMC9000=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS smc9000.o"
-fi
-
-# Check whether --enable-tiara or --disable-tiara was given.
-if test "${enable_tiara+set}" = set; then
- enableval="$enable_tiara"
-
-fi;
-if test "x$enable_tiara" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TIARA=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS tiara.o"
-fi
-
-# Check whether --enable-tulip or --disable-tulip was given.
-if test "${enable_tulip+set}" = set; then
- enableval="$enable_tulip"
-
-fi;
-if test "x$enable_tulip" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TULIP=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS tulip.o"
-fi
-
-# Check whether --enable-via-rhine or --disable-via-rhine was given.
-if test "${enable_via_rhine+set}" = set; then
- enableval="$enable_via_rhine"
-
-fi;
-if test "x$enable_via_rhine" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_VIA_RHINE=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS via_rhine.o"
-fi
-
-# Check whether --enable-w89c840 or --disable-w89c840 was given.
-if test "${enable_w89c840+set}" = set; then
- enableval="$enable_w89c840"
-
-fi;
-if test "x$enable_w89c840" = xyes; then
- NET_CFLAGS="$NET_CFLAGS -DINCLUDE_W89C840=1"
- NETBOOT_DRIVERS="$NETBOOT_DRIVERS w89c840.o"
-fi
-
-
-
-if test "x$NET_CFLAGS" != x; then
- NETBOOT_SUPPORT_TRUE=
- NETBOOT_SUPPORT_FALSE='#'
-else
- NETBOOT_SUPPORT_TRUE='#'
- NETBOOT_SUPPORT_FALSE=
-fi
-
-if test "x$NET_CFLAGS" != x; then
- FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1"
-fi
-
-# Check whether --enable-3c503-shmem or --disable-3c503-shmem was given.
-if test "${enable_3c503_shmem+set}" = set; then
- enableval="$enable_3c503_shmem"
-
-fi;
-if test "x$enable_3c503_shmem" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_SHMEM=1"
-fi
-
-# Check whether --enable-3c503-aui or --disable-3c503-aui was given.
-if test "${enable_3c503_aui+set}" = set; then
- enableval="$enable_3c503_aui"
-
-fi;
-if test "x$enable_3c503_aui" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_AUI=1"
-fi
-
-# Check whether --enable-compex-rl2000-fix or --disable-compex-rl2000-fix was given.
-if test "${enable_compex_rl2000_fix+set}" = set; then
- enableval="$enable_compex_rl2000_fix"
-
-fi;
-if test "x$enable_compex_rl2000_fix" = xyes; then
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCOMPEX_RL2000_FIX=1"
-fi
-
-# Check whether --enable-smc9000-scan or --disable-smc9000-scan was given.
-if test "${enable_smc9000_scan+set}" = set; then
- enableval="$enable_smc9000_scan"
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DSMC9000_SCAN=$enable_smc9000_scan"
-fi;
-
-# Check whether --enable-ne-scan or --disable-ne-scan was given.
-if test "${enable_ne_scan+set}" = set; then
- enableval="$enable_ne_scan"
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=$enable_ne_scan"
-else
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=0x280,0x300,0x320,0x340"
-fi;
-
-# Check whether --enable-wd-default-mem or --disable-wd-default-mem was given.
-if test "${enable_wd_default_mem+set}" = set; then
- enableval="$enable_wd_default_mem"
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=$enable_wd_default_mem"
-else
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=0xCC000"
-fi;
-
-# Check whether --enable-cs-scan or --disable-cs-scan was given.
-if test "${enable_cs_scan+set}" = set; then
- enableval="$enable_cs_scan"
- NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCS_SCAN=$enable_cs_scan"
-fi;
-
-# Check whether --enable-diskless or --disable-diskless was given.
-if test "${enable_diskless+set}" = set; then
- enableval="$enable_diskless"
-
-fi;
-
-
-if test "x$enable_diskless" = xyes; then
- DISKLESS_SUPPORT_TRUE=
- DISKLESS_SUPPORT_FALSE='#'
-else
- DISKLESS_SUPPORT_TRUE='#'
- DISKLESS_SUPPORT_FALSE=
-fi
-
-
-# Check whether --enable-hercules or --disable-hercules was given.
-if test "${enable_hercules+set}" = set; then
- enableval="$enable_hercules"
-
-fi;
-
-
-if test "x$enable_hercules" != xno; then
- HERCULES_SUPPORT_TRUE=
- HERCULES_SUPPORT_FALSE='#'
-else
- HERCULES_SUPPORT_TRUE='#'
- HERCULES_SUPPORT_FALSE=
-fi
-
-
-# Check whether --enable-serial or --disable-serial was given.
-if test "${enable_serial+set}" = set; then
- enableval="$enable_serial"
-
-fi;
-
-
-if test "x$enable_serial" != xno; then
- SERIAL_SUPPORT_TRUE=
- SERIAL_SUPPORT_FALSE='#'
-else
- SERIAL_SUPPORT_TRUE='#'
- SERIAL_SUPPORT_FALSE=
-fi
-
-
-# Check whether --enable-serial-speed-simulation or --disable-serial-speed-simulation was given.
-if test "${enable_serial_speed_simulation+set}" = set; then
- enableval="$enable_serial_speed_simulation"
-
-fi;
-
-
-if test "x$enable_serial_speed_simulation" = xyes; then
- SERIAL_SPEED_SIMULATION_TRUE=
- SERIAL_SPEED_SIMULATION_FALSE='#'
-else
- SERIAL_SPEED_SIMULATION_TRUE='#'
- SERIAL_SPEED_SIMULATION_FALSE=
-fi
-
-
-# Sanity check.
-if test "x$enable_diskless" = xyes; then
- if test "x$NET_CFLAGS" = x; then
- { { echo "$as_me:$LINENO: error: You must enable at least one network driver" >&5
-echo "$as_me: error: You must enable at least one network driver" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# Check whether --enable-preset-menu or --disable-preset-menu was given.
-if test "${enable_preset_menu+set}" = set; then
- enableval="$enable_preset_menu"
-
-fi;
-if test "x$enable_preset_menu" = x; then
- :
-else
- if test -r $enable_preset_menu; then
-
-# Because early versions of GNU sed 3.x are too buggy, use a C program
-# instead of shell commands. *sigh*
-cat >conftest.c <<\EOF
-#include <stdio.h>
-
-int
-main (void)
-{
- int c;
-
- while ((c = getchar ()) != EOF)
- {
- switch (c)
- {
- case '\n':
- fputs ("\\n", stdout);
- break;
- case '\r':
- fputs ("\\r", stdout);
- break;
- case '\\':
- fputs ("\\\\", stdout);
- break;
- case '"':
- fputs ("\\\"", stdout);
- break;
- default:
- putchar (c);
- }
- }
-
- return 0;
-}
-EOF
-
-if { ac_try='${CC-cc} ${CFLAGS} conftest.c -o conftest'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } && test -s conftest; then
- grub_tmp_value=`./conftest < "$enable_preset_menu"`
-else
- { { echo "$as_me:$LINENO: error: ${CC-cc} failed to produce an executable file" >&5
-echo "$as_me: error: ${CC-cc} failed to produce an executable file" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define PRESET_MENU_STRING "$grub_tmp_value"
-_ACEOF
-
-rm -f conftest*
-
- else
- { { echo "$as_me:$LINENO: error: Cannot read the preset menu file $enable_preset_menu" >&5
-echo "$as_me: error: Cannot read the preset menu file $enable_preset_menu" >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-# Check whether --enable-example-kernel or --disable-example-kernel was given.
-if test "${enable_example_kernel+set}" = set; then
- enableval="$enable_example_kernel"
-
-fi;
-
-
-if test "x$enable_example_kernel" = xyes; then
- BUILD_EXAMPLE_KERNEL_TRUE=
- BUILD_EXAMPLE_KERNEL_FALSE='#'
-else
- BUILD_EXAMPLE_KERNEL_TRUE='#'
- BUILD_EXAMPLE_KERNEL_FALSE=
-fi
-
-
-# Check whether --enable-auto-linux-mem-opt or --disable-auto-linux-mem-opt was given.
-if test "${enable_auto_linux_mem_opt+set}" = set; then
- enableval="$enable_auto_linux_mem_opt"
-
-fi;
-if test "x$enable_auto_linux_mem_opt" = xno; then
- :
-else
-
-cat >>confdefs.h <<\_ACEOF
-#define AUTO_LINUX_MEM_OPT 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-CCASFLAGS='$(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)'
-
-
-
- ac_config_files="$ac_config_files Makefile stage1/Makefile stage2/Makefile docs/Makefile lib/Makefile util/Makefile grub/Makefile netboot/Makefile util/grub-image util/grub-install util/grub-md5-crypt util/grub-terminfo util/grub-set-default"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${NETBOOT_SUPPORT_TRUE}" && test -z "${NETBOOT_SUPPORT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"NETBOOT_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"NETBOOT_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${DISKLESS_SUPPORT_TRUE}" && test -z "${DISKLESS_SUPPORT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"DISKLESS_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"DISKLESS_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${HERCULES_SUPPORT_TRUE}" && test -z "${HERCULES_SUPPORT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HERCULES_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HERCULES_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${SERIAL_SUPPORT_TRUE}" && test -z "${SERIAL_SUPPORT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"SERIAL_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"SERIAL_SUPPORT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${SERIAL_SPEED_SIMULATION_TRUE}" && test -z "${SERIAL_SPEED_SIMULATION_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"SERIAL_SPEED_SIMULATION\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"SERIAL_SPEED_SIMULATION\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${BUILD_EXAMPLE_KERNEL_TRUE}" && test -z "${BUILD_EXAMPLE_KERNEL_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"BUILD_EXAMPLE_KERNEL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"BUILD_EXAMPLE_KERNEL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by GRUB $as_me 0.97, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-GRUB config.status 0.97
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "stage1/Makefile" ) CONFIG_FILES="$CONFIG_FILES stage1/Makefile" ;;
- "stage2/Makefile" ) CONFIG_FILES="$CONFIG_FILES stage2/Makefile" ;;
- "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;;
- "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
- "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;;
- "grub/Makefile" ) CONFIG_FILES="$CONFIG_FILES grub/Makefile" ;;
- "netboot/Makefile" ) CONFIG_FILES="$CONFIG_FILES netboot/Makefile" ;;
- "util/grub-image" ) CONFIG_FILES="$CONFIG_FILES util/grub-image" ;;
- "util/grub-install" ) CONFIG_FILES="$CONFIG_FILES util/grub-install" ;;
- "util/grub-md5-crypt" ) CONFIG_FILES="$CONFIG_FILES util/grub-md5-crypt" ;;
- "util/grub-terminfo" ) CONFIG_FILES="$CONFIG_FILES util/grub-terminfo" ;;
- "util/grub-set-default" ) CONFIG_FILES="$CONFIG_FILES util/grub-set-default" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@PERL@,$PERL,;t t
-s,@CC@,$CC,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@CCAS@,$CCAS,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@STAGE1_CFLAGS@,$STAGE1_CFLAGS,;t t
-s,@STAGE2_CFLAGS@,$STAGE2_CFLAGS,;t t
-s,@GRUB_CFLAGS@,$GRUB_CFLAGS,;t t
-s,@OBJCOPY@,$OBJCOPY,;t t
-s,@ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t
-s,@GRUB_LIBS@,$GRUB_LIBS,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@NETBOOT_SUPPORT_TRUE@,$NETBOOT_SUPPORT_TRUE,;t t
-s,@NETBOOT_SUPPORT_FALSE@,$NETBOOT_SUPPORT_FALSE,;t t
-s,@DISKLESS_SUPPORT_TRUE@,$DISKLESS_SUPPORT_TRUE,;t t
-s,@DISKLESS_SUPPORT_FALSE@,$DISKLESS_SUPPORT_FALSE,;t t
-s,@HERCULES_SUPPORT_TRUE@,$HERCULES_SUPPORT_TRUE,;t t
-s,@HERCULES_SUPPORT_FALSE@,$HERCULES_SUPPORT_FALSE,;t t
-s,@SERIAL_SUPPORT_TRUE@,$SERIAL_SUPPORT_TRUE,;t t
-s,@SERIAL_SUPPORT_FALSE@,$SERIAL_SUPPORT_FALSE,;t t
-s,@SERIAL_SPEED_SIMULATION_TRUE@,$SERIAL_SPEED_SIMULATION_TRUE,;t t
-s,@SERIAL_SPEED_SIMULATION_FALSE@,$SERIAL_SPEED_SIMULATION_FALSE,;t t
-s,@BUILD_EXAMPLE_KERNEL_TRUE@,$BUILD_EXAMPLE_KERNEL_TRUE,;t t
-s,@BUILD_EXAMPLE_KERNEL_FALSE@,$BUILD_EXAMPLE_KERNEL_FALSE,;t t
-s,@FSYS_CFLAGS@,$FSYS_CFLAGS,;t t
-s,@NET_CFLAGS@,$NET_CFLAGS,;t t
-s,@NET_EXTRAFLAGS@,$NET_EXTRAFLAGS,;t t
-s,@NETBOOT_DRIVERS@,$NETBOOT_DRIVERS,;t t
-s,@CCASFLAGS@,$CCASFLAGS,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h. The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status. Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless. Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo ' :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
- # Write a limited-size here document to $tmp/defines.sed.
- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo ' fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
- # Write a limited-size here document to $tmp/undefs.sed.
- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
- rm -f conftest.undefs
- mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
- if test x"$ac_file" != x-; then
- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- rm -f $ac_file
- mv $tmp/config.h $ac_file
- fi
- else
- cat $tmp/config.h
- rm -f $tmp/config.h
- fi
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
- { (exit 1); exit 1; }; }; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
- esac
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2004-05-31.23
-
-# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit 0
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit 0
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # Dependencies are output in .lo.d with libtool 1.4.
- # With libtool 1.5 they are output both in $dir.libs/$base.o.d
- # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the
- # latter, because the former will be cleaned when $dir.libs is
- # erased.
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir$base.o.d"
- tmpdepfile3="$dir.libs/$base.d"
- "$@" -Wc,-MD
- else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
- tmpdepfile3="$dir$base.d"
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- elif test -f "$tmpdepfile2"; then
- tmpdepfile="$tmpdepfile2"
- else
- tmpdepfile="$tmpdepfile3"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-SOURCES = $(kernel_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-EXTRA_PROGRAMS = kernel$(EXEEXT)
-@BUILD_EXAMPLE_KERNEL_TRUE@noinst_PROGRAMS = kernel$(EXEEXT)
-subdir = docs
-DIST_COMMON = $(grub_TEXINFOS) $(multiboot_TEXINFOS) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
- texinfo.tex
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(noinst_PROGRAMS)
-am__kernel_SOURCES_DIST = boot.S kernel.c multiboot.h
-am__objects_1 = boot.$(OBJEXT) kernel-kernel.$(OBJEXT)
-@BUILD_EXAMPLE_KERNEL_TRUE@am_kernel_OBJECTS = $(am__objects_1)
-kernel_OBJECTS = $(am_kernel_OBJECTS)
-kernel_LDADD = $(LDADD)
-SCRIPTS = $(noinst_SCRIPTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(kernel_SOURCES)
-DIST_SOURCES = $(am__kernel_SOURCES_DIST)
-INFO_DEPS = $(srcdir)/grub.info $(srcdir)/multiboot.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = grub.dvi multiboot.dvi
-PDFS = grub.pdf multiboot.pdf
-PSS = grub.ps multiboot.ps
-HTMLS = grub.html multiboot.html
-TEXINFOS = grub.texi multiboot.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
- "$(DESTDIR)$(man8dir)"
-man1dir = $(mandir)/man1
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-info_TEXINFOS = grub.texi multiboot.texi
-grub_TEXINFOS = internals.texi fdl.texi
-EXAMPLES = boot.S kernel.c multiboot.h
-multiboot_TEXINFOS = boot.S.texi kernel.c.texi multiboot.h.texi
-man_MANS = grub.8 mbchk.1 grub-install.8 grub-md5-crypt.8 grub-terminfo.8
-HELP2MAN = help2man
-SRC2TEXI = src2texi
-noinst_SCRIPTS = $(HELP2MAN) $(SRC2TEXI)
-@BUILD_EXAMPLE_KERNEL_TRUE@kernel_SOURCES = $(EXAMPLES)
-@BUILD_EXAMPLE_KERNEL_TRUE@kernel_CFLAGS = -fno-builtin -nostdinc -O -g -Wall \
-@BUILD_EXAMPLE_KERNEL_TRUE@ -imacros $(top_builddir)/config.h
-
-@BUILD_EXAMPLE_KERNEL_TRUE@kernel_LDFLAGS = -nostdlib -Wl,-N -Wl,-Ttext -Wl,100000
-EXTRA_DIST = menu.lst $(man_MANS) $(noinst_SCRIPTS) \
- $(EXAMPLES) $(multiboot_TEXINFOS)
-
-CLEANFILES = $(noinst_PROGRAMS)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .html .info .o .obj .pdf .ps .texi
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu docs/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstPROGRAMS:
- -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-kernel$(EXEEXT): $(kernel_OBJECTS) $(kernel_DEPENDENCIES)
- @rm -f kernel$(EXEEXT)
- $(LINK) $(kernel_LDFLAGS) $(kernel_OBJECTS) $(kernel_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kernel-kernel.Po@am__quote@
-
-.S.o:
- $(CCASCOMPILE) -c $<
-
-.S.obj:
- $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-kernel-kernel.o: kernel.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -MT kernel-kernel.o -MD -MP -MF "$(DEPDIR)/kernel-kernel.Tpo" -c -o kernel-kernel.o `test -f 'kernel.c' || echo '$(srcdir)/'`kernel.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/kernel-kernel.Tpo" "$(DEPDIR)/kernel-kernel.Po"; else rm -f "$(DEPDIR)/kernel-kernel.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='kernel.c' object='kernel-kernel.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -c -o kernel-kernel.o `test -f 'kernel.c' || echo '$(srcdir)/'`kernel.c
-
-kernel-kernel.obj: kernel.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -MT kernel-kernel.obj -MD -MP -MF "$(DEPDIR)/kernel-kernel.Tpo" -c -o kernel-kernel.obj `if test -f 'kernel.c'; then $(CYGPATH_W) 'kernel.c'; else $(CYGPATH_W) '$(srcdir)/kernel.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/kernel-kernel.Tpo" "$(DEPDIR)/kernel-kernel.Po"; else rm -f "$(DEPDIR)/kernel-kernel.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='kernel.c' object='kernel-kernel.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -c -o kernel-kernel.obj `if test -f 'kernel.c'; then $(CYGPATH_W) 'kernel.c'; else $(CYGPATH_W) '$(srcdir)/kernel.c'; fi`
-
-.texi.info:
- restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- cd $(srcdir); \
- else \
- rc=$$?; \
- cd $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
-
-.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
-
-.texi.html:
- rm -rf $(@:.html=.htp)
- if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
- then \
- rm -rf $@; \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
- else \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
- exit 1; \
- fi
-$(srcdir)/grub.info: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS)
-grub.dvi: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS)
-grub.pdf: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS)
-grub.html: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS)
-$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
-$(srcdir)/stamp-vti: grub.texi $(top_srcdir)/configure
- @(dir=.; test -f ./grub.texi || dir=$(srcdir); \
- set `$(SHELL) $(srcdir)/mdate-sh $$dir/grub.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp $(srcdir)/version.texi \
- || (echo "Updating $(srcdir)/version.texi"; \
- cp vti.tmp $(srcdir)/version.texi)
- -@rm -f vti.tmp
- @cp $(srcdir)/version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
-@MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-$(srcdir)/multiboot.info: multiboot.texi $(multiboot_TEXINFOS)
-multiboot.dvi: multiboot.texi $(multiboot_TEXINFOS)
-multiboot.pdf: multiboot.texi $(multiboot_TEXINFOS)
-multiboot.html: multiboot.texi $(multiboot_TEXINFOS)
-.dvi.ps:
- $(DVIPS) -o $@ $<
-
-uninstall-info-am:
- $(PRE_UNINSTALL)
- @if (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if cd "$(DESTDIR)$(infodir)"; then \
- echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in $$d/$$base*; do \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f $(distdir)/$$relfile || \
- cp -p $$file $(distdir)/$$relfile; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf grub.aux grub.cp grub.cps grub.fn grub.ky grub.log grub.pg grub.tmp \
- grub.toc grub.tp grub.vr grub.dvi grub.pdf grub.ps grub.html \
- multiboot.aux multiboot.cp multiboot.cps multiboot.fn \
- multiboot.ky multiboot.log multiboot.pg multiboot.tmp \
- multiboot.toc multiboot.tp multiboot.vr multiboot.dvi \
- multiboot.pdf multiboot.ps multiboot.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
-install-man8: $(man8_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.8*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 8*) ;; \
- *) ext='8' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS)
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am install-man
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
- echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
- $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
- else : ; fi; \
- done; \
- done
- @$(POST_INSTALL)
- @if (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man: install-man1 install-man8
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
- mostlyclean-generic mostlyclean-vti
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-info-am uninstall-man
-
-uninstall-man: uninstall-man1 uninstall-man8
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstPROGRAMS ctags dist-info distclean \
- distclean-compile distclean-generic distclean-tags distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-man1 \
- install-man8 install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti mostlyclean \
- mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
- mostlyclean-vti pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am uninstall-man uninstall-man1 \
- uninstall-man8
-
-
-@BUILD_EXAMPLE_KERNEL_TRUE@boot.o: multiboot.h
-
-# Cancel the rule %.texi -> %. This rule may confuse make to determine
-# the dependecies.
-.texi:
-
-%.c.texi: %.c $(srcdir)/$(SRC2TEXI)
- $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@
-
-%.h.texi: %.h $(srcdir)/$(SRC2TEXI)
- $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@
-
-%.S.texi: %.S $(srcdir)/$(SRC2TEXI)
- $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@
-
-@MAINTAINER_MODE_TRUE@$(srcdir)/grub.8: ../grub/grub $(srcdir)/$(HELP2MAN)
-@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) --name="the grub shell" \
-@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $<
-
-@MAINTAINER_MODE_TRUE@$(srcdir)/grub-install.8: ../util/grub-install $(srcdir)/$(HELP2MAN)
-@MAINTAINER_MODE_TRUE@ chmod 755 $<
-@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) --name="install GRUB on your drive" \
-@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $<
-
-@MAINTAINER_MODE_TRUE@$(srcdir)/mbchk.1: ../util/mbchk $(srcdir)/$(HELP2MAN)
-@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \
-@MAINTAINER_MODE_TRUE@ --name="check the format of a Multiboot kernel" \
-@MAINTAINER_MODE_TRUE@ --section=1 --output=$@ $<
-
-@MAINTAINER_MODE_TRUE@$(srcdir)/grub-md5-crypt.8: ../util/grub-md5-crypt $(srcdir)/$(HELP2MAN)
-@MAINTAINER_MODE_TRUE@ chmod 755 $<
-@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \
-@MAINTAINER_MODE_TRUE@ --name="Encrypt a password in MD5 format" \
-@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $<
-
-@MAINTAINER_MODE_TRUE@$(srcdir)/grub-terminfo.8: ../util/grub-terminfo $(srcdir)/$(HELP2MAN)
-@MAINTAINER_MODE_TRUE@ chmod 755 $<
-@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \
-@MAINTAINER_MODE_TRUE@ --name="Generate a terminfo command from a terminfo name" \
-@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $<
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#!/bin/sh
-# Get modification time of a file or directory and pretty-print it.
-
-scriptversion=2004-12-08.12
-
-# Copyright (C) 1995, 1996, 1997, 2003, 2004 Free Software Foundation, Inc.
-# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
- '')
- echo "$0: No file. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: mdate-sh [--help] [--version] FILE
-
-Pretty-print the modification time of FILE.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit 0
- ;;
- -v | --v*)
- echo "mdate-sh $scriptversion"
- exit 0
- ;;
-esac
-
-# Prevent date giving response in another language.
-LANG=C
-export LANG
-LC_ALL=C
-export LC_ALL
-LC_TIME=C
-export LC_TIME
-
-save_arg1="$1"
-
-# Find out how to get the extended ls output of a file or directory.
-if ls -L /dev/null 1>/dev/null 2>&1; then
- ls_command='ls -L -l -d'
-else
- ls_command='ls -l -d'
-fi
-
-# A `ls -l' line looks as follows on OS/2.
-# drwxrwx--- 0 Aug 11 2001 foo
-# This differs from Unix, which adds ownership information.
-# drwxrwx--- 2 root root 4096 Aug 11 2001 foo
-#
-# To find the date, we split the line on spaces and iterate on words
-# until we find a month. This cannot work with files whose owner is a
-# user named `Jan', or `Feb', etc. However, it's unlikely that `/'
-# will be owned by a user whose name is a month. So we first look at
-# the extended ls output of the root directory to decide how many
-# words should be skipped to get the date.
-
-# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-set x`ls -l -d /`
-
-# Find which argument is the month.
-month=
-command=
-until test $month
-do
- shift
- # Add another shift to the command.
- command="$command shift;"
- case $1 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
- esac
-done
-
-# Get the extended ls output of the file or directory.
-set x`eval "$ls_command \"\$save_arg1\""`
-
-# Remove all preceding arguments
-eval $command
-
-# Get the month. Next argument is day, followed by the year or time.
-case $1 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
-esac
-
-day=$2
-
-# Here we have to deal with the problem that the ls output gives either
-# the time of day or the year.
-case $3 in
- *:*) set `date`; eval year=\$$#
- case $2 in
- Jan) nummonthtod=1;;
- Feb) nummonthtod=2;;
- Mar) nummonthtod=3;;
- Apr) nummonthtod=4;;
- May) nummonthtod=5;;
- Jun) nummonthtod=6;;
- Jul) nummonthtod=7;;
- Aug) nummonthtod=8;;
- Sep) nummonthtod=9;;
- Oct) nummonthtod=10;;
- Nov) nummonthtod=11;;
- Dec) nummonthtod=12;;
- esac
- # For the first six month of the year the time notation can also
- # be used for files modified in the last year.
- if (expr $nummonth \> $nummonthtod) > /dev/null;
- then
- year=`expr $year - 1`
- fi;;
- *) year=$3;;
-esac
-
-# The result.
-echo $day $month $year
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2004-11-25.16}
-%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
-% Foundation, Inc.
-%
-% This texinfo.tex file is free software; you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
-%
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction. (This has been our intent since Texinfo was invented.)
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org).
-% The texinfo.tex in any given distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org. Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem. Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For a simple
-% manual foo.texi, however, you can get away with this:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages, to some
-% extent. You can get the existing language-specific files from the
-% full Texinfo distribution.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-\message{Basics,}
-\chardef\other=12
-
-% We never want plain's \outer definition of \+ in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-% Save some plain tex macros whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexfootnote=\footnote
-\let\ptexgtr=>
-\let\ptexhat=^
-\let\ptexi=\i
-\let\ptexindent=\indent
-\let\ptexinsert=\insert
-\let\ptexlbrace=\{
-\let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
-\let\ptexplus=+
-\let\ptexrbrace=\}
-\let\ptexslash=\/
-\let\ptexstar=\*
-\let\ptext=\t
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Pre-3.0.
-\else
- \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
-\chardef\colonChar = `\:
-\chardef\commaChar = `\,
-\chardef\dotChar = `\.
-\chardef\exclamChar= `\!
-\chardef\questChar = `\?
-\chardef\semiChar = `\;
-\chardef\underChar = `\_
-
-\chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
-
-% Hyphenation fixes.
-\hyphenation{
- Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
- ap-pen-dix bit-map bit-maps
- data-base data-bases eshell fall-ing half-way long-est man-u-script
- man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
- par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
- spell-ing spell-ings
- stand-alone strong-est time-stamp time-stamps which-ever white-space
- wide-spread wrap-around
-}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal. We also make
-% some effort to order the tracing commands to reduce output in the log
-% file; cf. trace.sty in LaTeX.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{%
- \tracingstats2
- \tracingpages1
- \tracinglostchars2 % 2 gives us more in etex
- \tracingparagraphs1
- \tracingoutput1
- \tracingmacros2
- \tracingrestores1
- \showboxbreadth\maxdimen \showboxdepth\maxdimen
- \ifx\eTeXversion\undefined\else % etex gives us more logging
- \tracingscantokens1
- \tracingifs1
- \tracinggroups1
- \tracingnesting2
- \tracingassigns1
- \fi
- \tracingcommands3 % 3 gives us more in etex
- \errorcontextlines16
-}%
-
-% add check for \lastpenalty to plain's definitions. If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
- \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
- \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
- \removelastskip\penalty-200\bigskip\fi\fi}
-
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- \shipout\vbox{%
- % Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
- %
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \normalturnoffactive
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
- \def\next{#2}%
- \begingroup
- \obeylines
- \spaceisspace
- #1%
- \parseargline\empty% Insert the \empty token, see \finishparsearg below.
-}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- \argremovecomment #1\comment\ArgTerm%
- }%
-}
-
-% First remove any @comment, then any @c comment.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
-% @end itemize @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
-%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
- \def\temp{#3}%
- \ifx\temp\empty
- % We cannot use \next here, as it holds the macro to run;
- % thus we reuse \temp.
- \let\temp\finishparsearg
- \else
- \let\temp\argcheckspaces
- \fi
- % Put the space token in:
- \temp#1 #3\ArgTerm
-}
-
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
-%
-% But first, we have to remove the trailing space token.
-%
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
-
-% \parseargdef\foo{...}
-% is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-%
-% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
-% favourite TeX trick. --kasal, 16nov03
-
-\def\parseargdef#1{%
- \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
- \def#2{\parsearg#1}%
- \def#1##1%
-}
-
-% Several utility definitions with active space:
-{
- \obeyspaces
- \gdef\obeyedspace{ }
-
- % Make each space character in the input produce a normal interword
- % space in the output. Don't allow a line break at this space, as this
- % is used only in environments like @example, where each line of input
- % should produce a line of output anyway.
- %
- \gdef\sepspaces{\obeyspaces\let =\tie}
-
- % If an index command is used in an @example environment, any spaces
- % therein should become regular spaces in the raw index file, not the
- % expansion of \tie (\leavevmode \penalty \@M \ ).
- \gdef\unsepspaces{\let =\space}
-}
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-% Define the framework for environments in texinfo.tex. It's used like this:
-%
-% \envdef\foo{...}
-% \def\Efoo{...}
-%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo. \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches. The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group. (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
-
-
-% At runtime, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
-
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
-
-% Check whether we're in the right environment:
-\def\checkenv#1{%
- \def\temp{#1}%
- \ifx\thisenv\temp
- \else
- \badenverr
- \fi
-}
-
-% Evironment mismatch, #1 expected:
-\def\badenverr{%
- \errhelp = \EMsimple
- \errmessage{This command can appear only \inenvironment\temp,
- not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
- \ifx#1\empty
- out of any environment%
- \else
- in environment \expandafter\string#1%
- \fi
-}
-
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
-%
-\parseargdef\end{%
- \if 1\csname iscond.#1\endcsname
- \else
- % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
- \expandafter\checkenv\csname#1\endcsname
- \csname E#1\endcsname
- \endgroup
- \fi
-}
-
-\newhelp\EMsimple{Press RETURN to continue.}
-
-
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
- % Definitions to produce \{ and \} commands for indices,
- % and @{ and @} for the aux file.
- \catcode`\{ = \other \catcode`\} = \other
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\! = 0 \catcode`\\ = \other
- !gdef!lbracecmd[\{]%
- !gdef!rbracecmd[\}]%
- !gdef!lbraceatcmd[@{]%
- !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence. (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo. Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
- L\kern-.36em
- {\setbox0=\hbox{T}%
- \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
- \kern-.15em
- \TeX
-}
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @/ allows a line break.
-\let\/=\allowbreak
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-% Another complication is that the group might be very large. This can
-% cause the glue on the previous page to be unduly stretched, because it
-% does not have much material. In this case, it's better to add an
-% explicit \vfill so that the extra space is at the bottom. The
-% threshold for doing this is if the group is more than \vfilllimit
-% percent of a page (\vfilllimit can be changed inside of @tex).
-%
-\newbox\groupbox
-\def\vfilllimit{0.7}
-%
-\envdef\group{%
- \ifnum\catcode`\^^M=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- \startsavinginserts
- %
- \setbox\groupbox = \vtop\bgroup
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it. Thus, space below is not quite equal to space
-% above. But it's pretty close.
-\def\Egroup{%
- % To get correct interline space between the last line of the group
- % and the first line afterwards, we have to propagate \prevdepth.
- \endgraf % Not \par, as it may have been set to \lisppar.
- \global\dimen1 = \prevdepth
- \egroup % End the \vtop.
- % \dimen0 is the vertical size of the group's box.
- \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
- % \dimen2 is how much space is left on the page (more or less).
- \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
- % if the group doesn't fit on the current page, and it's a big big
- % group, force a page break.
- \ifdim \dimen0 > \dimen2
- \ifdim \pagetotal < \vfilllimit\pageheight
- \page
- \fi
- \fi
- \box\groupbox
- \prevdepth = \dimen1
- \checkinserts
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-% Old definition--didn't work.
-%\parseargdef\need{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
-\parseargdef\need{%
- % Ensure vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % If the @need value is less than one line space, it's useless.
- \dimen0 = #1\mil
- \dimen2 = \ht\strutbox
- \advance\dimen2 by \dp\strutbox
- \ifdim\dimen0 > \dimen2
- %
- % Do a \strut just to make the height of this box be normal, so the
- % normal leading is inserted relative to the preceding line.
- % And a page break here is fine.
- \vtop to #1\mil{\strut\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
- \fi
-}
-
-% @br forces paragraph break (and is undocumented).
-
-\let\br = \par
-
-% @page forces the start of a new page.
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
-
-% This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
- \leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph. For more general purposes, use the \margin insertion
-% class. WHICH is `l' or `r'.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
- \nobreak
- \kern-\strutdepth
- \vtop to \strutdepth{%
- \baselineskip=\strutdepth
- \vss
- % if you have multiple lines of stuff to put here, you'll need to
- % make the vbox yourself of the appropriate size.
- \ifx#1l%
- \llap{\ignorespaces #2\hskip\inmarginspacing}%
- \else
- \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
- \fi
- \null
- }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \def\lefttext{#1}% have both texts
- \def\righttext{#2}%
- \else
- \def\lefttext{#1}% have only one text
- \def\righttext{#1}%
- \fi
- %
- \ifodd\pageno
- \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
- \else
- \def\temp{\inleftmargin\lefttext}%
- \fi
- \temp
-}
-
-% @include file insert text of that file as input.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
- \pushthisfilestack
- \def\thisfile{#1}%
- {%
- \makevalueexpandable
- \def\temp{\input #1 }%
- \expandafter
- }\temp
- \popthisfilestack
-}
-\def\filenamecatcodes{%
- \catcode`\\=\other
- \catcode`~=\other
- \catcode`^=\other
- \catcode`_=\other
- \catcode`|=\other
- \catcode`<=\other
- \catcode`>=\other
- \catcode`+=\other
- \catcode`-=\other
-}
-
-\def\pushthisfilestack{%
- \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
- \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
- \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
- the stack of filenames is empty.}}
-
-\def\thisfile{}
-
-% @center line
-% outputs that line, centered.
-%
-\parseargdef\center{%
- \ifhmode
- \let\next\centerH
- \else
- \let\next\centerV
- \fi
- \next{\hfil \ignorespaces#1\unskip \hfil}%
-}
-\def\centerH#1{%
- {%
- \hfil\break
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{#1}%
- \break
- }%
-}
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
-
-% @sp n outputs n lines of vertical space
-
-\parseargdef\sp{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
-\let\c=\comment
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% NCHARS can also be the word `asis' or `none'.
-% We cannot feasibly implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\parseargdef\paragraphindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \defaultparindent = 0pt
- \else
- \defaultparindent = #1em
- \fi
- \fi
- \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \lispnarrowing = 0pt
- \else
- \lispnarrowing = #1em
- \fi
- \fi
-}
-
-% @firstparagraphindent WORD
-% If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading. If WORD is `insert', then do indent at such
-% paragraphs.
-%
-% The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
-%
-\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
-\def\insertword{insert}
-%
-\parseargdef\firstparagraphindent{%
- \def\temp{#1}%
- \ifx\temp\noneword
- \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
- \else\ifx\temp\insertword
- \let\suppressfirstparagraphindent = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @firstparagraphindent option `\temp'}%
- \fi\fi
-}
-
-% Here is how we actually suppress indentation. Redefine \everypar to
-% \kern backwards by \parindent, and then reset itself to empty.
-%
-% We also make \indent itself not actually do anything until the next
-% paragraph.
-%
-\gdef\dosuppressfirstparagraphindent{%
- \gdef\indent{%
- \restorefirstparagraphindent
- \indent
- }%
- \gdef\noindent{%
- \restorefirstparagraphindent
- \noindent
- }%
- \global\everypar = {%
- \kern -\parindent
- \restorefirstparagraphindent
- }%
-}
-
-\gdef\restorefirstparagraphindent{%
- \global \let \indent = \ptexindent
- \global \let \noindent = \ptexnoindent
- \global \everypar = {}%
-}
-
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}. So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
- \catcode\underChar = \active
- \gdef\mathunderscore{%
- \catcode\underChar=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
- }
-}
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care. Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
- \tex
- \mathunderscore
- \let\\ = \mathbackslash
- \mathactive
- $\finishmath
-}
-\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
- \catcode`^ = \active
- \catcode`< = \active
- \catcode`> = \active
- \catcode`+ = \active
- \gdef\mathactive{%
- \let^ = \ptexhat
- \let< = \ptexless
- \let> = \ptexgtr
- \let+ = \ptexplus
- }
-}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
- \leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil
- .\hfil.\hfil.%
- \hskip 0pt plus 0.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \dots
- \spacefactor=3000
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \iflinks
- \tryauxfile
- % Open the new aux file. TeX will close it automatically at exit.
- \immediate\openout\auxfile=\jobname.aux
- \fi % \openindices needs to do some work in any case.
- \openindices
- \let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- \openin 1 texinfo.cnf
- \ifeof 1 \else \input texinfo.cnf \fi
- \closein 1
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set). So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
-\ifx\pdfoutput\undefined
-\else
- \ifx\pdfoutput\relax
- \else
- \ifcase\pdfoutput
- \else
- \pdftrue
- \fi
- \fi
-\fi
-%
-\ifpdf
- \input pdfcolor
- \pdfcatalog{/PageMode /UseOutlines}%
- \def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
- % without \immediate, pdftex seg faults when the same image is
- % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
- \ifnum\pdftexversion < 14
- \immediate\pdfimage
- \else
- \immediate\pdfximage
- \fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
- \ifnum\pdftexversion<13
- #1.pdf%
- \else
- {#1.pdf}%
- \fi
- \ifnum\pdftexversion < 14 \else
- \pdfrefximage \pdflastximage
- \fi}
- \def\pdfmkdest#1{{%
- % We have to set dummies so commands such as @code in a section title
- % aren't expanded.
- \atdummies
- \normalturnoffactive
- \pdfdest name{#1} xyz%
- }}
- \def\pdfmkpgn#1{#1}
- \let\linkcolor = \Blue % was Cyan, but that seems light?
- \def\endlink{\Black\pdfendlink}
- % Adding outlines to PDF; macros for calculating structure of outlines
- % come from Petr Olsak
- \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
- \else \csname#1\endcsname \fi}
- \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
- \advance\tempnum by 1
- \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
- %
- % #1 is the section text. #2 is the pdf expression for the number
- % of subentries (or empty, for subsubsections). #3 is the node
- % text, which might be empty if this toc entry had no
- % corresponding node. #4 is the page number.
- %
- \def\dopdfoutline#1#2#3#4{%
- % Generate a link to the node text if that exists; else, use the
- % page number. We could generate a destination for the section
- % text in the case where a section has no node, but it doesn't
- % seem worthwhile, since most documents are normally structured.
- \def\pdfoutlinedest{#3}%
- \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
- %
- \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
- }
- %
- \def\pdfmakeoutlines{%
- \begingroup
- % Thanh's hack / proper braces in bookmarks
- \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
- \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
- %
- % Read toc silently, to get counts of subentries for \pdfoutline.
- \def\numchapentry##1##2##3##4{%
- \def\thischapnum{##2}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- }%
- \def\numsecentry##1##2##3##4{%
- \advancenumber{chap\thischapnum}%
- \def\thissecnum{##2}%
- \def\thissubsecnum{0}%
- }%
- \def\numsubsecentry##1##2##3##4{%
- \advancenumber{sec\thissecnum}%
- \def\thissubsecnum{##2}%
- }%
- \def\numsubsubsecentry##1##2##3##4{%
- \advancenumber{subsec\thissubsecnum}%
- }%
- \def\thischapnum{0}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- %
- % use \def rather than \let here because we redefine \chapentry et
- % al. a second time, below.
- \def\appentry{\numchapentry}%
- \def\appsecentry{\numsecentry}%
- \def\appsubsecentry{\numsubsecentry}%
- \def\appsubsubsecentry{\numsubsubsecentry}%
- \def\unnchapentry{\numchapentry}%
- \def\unnsecentry{\numsecentry}%
- \def\unnsubsecentry{\numsubsecentry}%
- \def\unnsubsubsecentry{\numsubsubsecentry}%
- \input \jobname.toc
- %
- % Read toc second time, this time actually producing the outlines.
- % The `-' means take the \expnumber as the absolute number of
- % subentries, which we calculated on our first read of the .toc above.
- %
- % We use the node names as the destinations.
- \def\numchapentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
- \def\numsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
- \def\numsubsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
- \def\numsubsubsecentry##1##2##3##4{% count is always zero
- \dopdfoutline{##1}{}{##3}{##4}}%
- %
- % PDF outlines are displayed using system fonts, instead of
- % document fonts. Therefore we cannot use special characters,
- % since the encoding is unknown. For example, the eogonek from
- % Latin 2 (0xea) gets translated to a | character. Info from
- % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
- %
- % xx to do this right, we have to translate 8-bit characters to
- % their "best" equivalent, based on the @documentencoding. Right
- % now, I guess we'll just let the pdf reader have its way.
- \indexnofonts
- \turnoffactive
- \input \jobname.toc
- \endgroup
- }
- %
- \def\makelinks #1,{%
- \def\params{#1}\def\E{END}%
- \ifx\params\E
- \let\nextmakelinks=\relax
- \else
- \let\nextmakelinks=\makelinks
- \ifnum\lnkcount>0,\fi
- \picknum{#1}%
- \startlink attr{/Border [0 0 0]}
- goto name{\pdfmkpgn{\the\pgn}}%
- \linkcolor #1%
- \advance\lnkcount by 1%
- \endlink
- \fi
- \nextmakelinks
- }
- \def\picknum#1{\expandafter\pn#1}
- \def\pn#1{%
- \def\p{#1}%
- \ifx\p\lbrace
- \let\nextpn=\ppn
- \else
- \let\nextpn=\ppnn
- \def\first{#1}
- \fi
- \nextpn
- }
- \def\ppn#1{\pgn=#1\gobble}
- \def\ppnn{\pgn=\first}
- \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
- \def\skipspaces#1{\def\PP{#1}\def\D{|}%
- \ifx\PP\D\let\nextsp\relax
- \else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
- \fi
- \nextsp}
- \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
- \ifnum\pdftexversion < 14
- \let \startlink \pdfannotlink
- \else
- \let \startlink \pdfstartlink
- \fi
- \def\pdfurl#1{%
- \begingroup
- \normalturnoffactive\def\@{@}%
- \makevalueexpandable
- \leavevmode\Red
- \startlink attr{/Border [0 0 0]}%
- user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
- \endgroup}
- \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
- \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
- \def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|\relax
- \ifx\first0\adn0
- \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
- \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
- \else
- \ifnum0=\countA\else\makelink\fi
- \ifx\first.\let\next=\done\else
- \let\next=\maketoks
- \addtokens{\toksB}{\the\toksD}
- \ifx\first,\addtokens{\toksB}{\space}\fi
- \fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \next}
- \def\makelink{\addtokens{\toksB}%
- {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
- \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \linkcolor #1\endlink}
- \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\linkcolor = \relax
- \let\pdfmakeoutlines = \relax
-\fi % \ifx\pdfoutput
-
-
-\message{fonts,}
-
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
- \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
- \csname ten#1\endcsname % change the current font
-}
-
-% Select #1 fonts with the current style.
-%
-\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
-\newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
-
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\undefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}
-\setfont\texttt\ttshape{10}{\mainmagstep}
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}
-\setfont\deftt\ttshape{10}{\magstep1}
-\setfont\defttsl\ttslshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-
-% Section fonts (14.4pt).
-\def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-
-% Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-
-% Reduced fonts for @acro in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}
-\setfont\reducedtt\ttshape{10}{1000}
-\setfont\reducedbf\bfshape{10}{1000}
-\setfont\reducedit\itshape{10}{1000}
-\setfont\reducedsl\slshape{10}{1000}
-\setfont\reducedsf\sfshape{10}{1000}
-\setfont\reducedsc\scshape{10}{1000}
-\setfont\reducedttsl\ttslshape{10}{1000}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts except
-% in the main text, we don't bother to reset \scriptfont and
-% \scriptscriptfont (which would also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
- \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
- \textfont\ttfam=\tentt \textfont\sffam=\tensf
-}
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this because \STYLE needs to also set the
-% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
-% \tenSTYLE to set the current font.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower). These relative commands are used in
-% the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
- \let\tenttsl=\textttsl
- \def\curfontsize{text}%
- \def\lsize{reduced}\def\lllsize{smaller}%
- \resetmathfonts \setleading{\textleading}}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \def\curfontsize{title}%
- \def\lsize{chap}\def\lllsize{subsec}%
- \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \let\tenttsl=\chapttsl
- \def\curfontsize{chap}%
- \def\lsize{sec}\def\lllsize{text}%
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \let\tenttsl=\secttsl
- \def\curfontsize{sec}%
- \def\lsize{subsec}\def\lllsize{reduced}%
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \let\tenttsl=\ssecttsl
- \def\curfontsize{ssec}%
- \def\lsize{text}\def\lllsize{small}%
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts
-\def\reducedfonts{%
- \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
- \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
- \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
- \let\tenttsl=\reducedttsl
- \def\curfontsize{reduced}%
- \def\lsize{small}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallfonts{%
- \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
- \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
- \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
- \let\tenttsl=\smallttsl
- \def\curfontsize{small}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallerfonts{%
- \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
- \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
- \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
- \let\tenttsl=\smallerttsl
- \def\curfontsize{smaller}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{9.5pt}}
-
-% Set the fonts to use with the @small... environments.
-\let\smallexamplefonts = \smallfonts
-
-% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
-% can fit this many characters:
-% 8.5x11=86 smallbook=72 a4=90 a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
-% 8.5x11=90+ smallbook=80 a4=90+ a5=77
-% For me, subjectively, the few extra characters that fit aren't worth
-% the additional smallness of 8pt. So I'm making the default 9pt.
-%
-% By the way, for comparison, here's what fits with @example (10pt):
-% 8.5x11=71 smallbook=60 a4=75 a5=58
-%
-% I wish the USA used A4 paper.
-% --karl, 24jan03.
-
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\textfonts \rm
-
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}
-\setfont\shortconttt\ttshape{12}{1000}
-
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
-
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
- \ptexslash\fi\fi\fi}
-\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally uses \ttsl.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally use \sl. We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
-
-\let\i=\smartitalic
-\let\slanted=\smartslanted
-\let\var=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-
-% @b, explicit bold.
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-% Set sfcode to normal for the chars that usually have another value.
-% Can't use plain's \frenchspacing because it uses the `\x notation, and
-% sometimes \x has an active definition that messes things up.
-%
-\catcode`@=11
- \def\frenchspacing{%
- \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
- \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
- }
-\catcode`@=\other
-
-\def\t#1{%
- {\tt \rawbackslash \frenchspacing #1}%
- \null
-}
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \frenchspacing
- #1%
- }%
- \null
-}
-
-% We *must* turn on hyphenation at `-' and `_' in @code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active
- \catcode`\_=\active
- %
- \global\def\code{\begingroup
- \catcode`\-=\active \let-\codedash
- \catcode`\_=\active \let_\codeunder
- \codex
- }
-}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{%
- % this is all so @math{@code{var_name}+1} can work. In math mode, _
- % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
- % will therefore expand the active definition of _, which is us
- % (inside @code that is), therefore an endless loop.
- \ifusingtt{\ifmmode
- \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
- \else\normalunderscore \fi
- \discretionary{}{}{}}%
- {\_}%
-}
-\def\codex #1{\tclose{#1}\endgroup}
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @kbdinputstyle option `\arg'}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct.'
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url. Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
- \def\email#1{\doemail#1,,\finish}
- \def\doemail#1,#2,#3\finish{\begingroup
- \unsepspaces
- \pdfurl{mailto:#1}%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
- \endlink
- \endgroup}
-\else
- \let\email=\uref
-\fi
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-%
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
- {\selectfonts\lsize #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-%
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
- {\frenchspacing #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
-
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
-\def\pounds{{\it\$}}
-
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
-% Although only regular is the truly official Euro symbol, we ignore
-% that. The Euro is designed to be slightly taller than the regular
-% font height.
-%
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-%
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-%
-% Also doesn't work in math. Do we need to do math with euro symbols?
-% Hope not.
-%
-%
-\def\euro{{\eurofont e}}
-\def\eurofont{%
- % We set the font at each command, rather than predefining it in
- % \textfonts and the other font-switching commands, so that
- % installations which never need the symbold don't have to have the
- % font installed.
- %
- % There is only one designed size (nominal 10pt), so we always scale
- % that to the current nominal size.
- %
- % By the way, simply using "at 1em" works for cmr10 and the like, but
- % does not work for cmbx10 and other extended/shrunken fonts.
- %
- \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
- %
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
- \else
- % regular:
- \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
- \fi
- \thiseurofont
-}
-
-% @registeredsymbol - R in a circle. The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
-% Adapted from the plain.tex definition of \copyright.
-%
-\def\registeredsymbol{%
- $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
- \hfil\crcr\Orb}}%
- }$%
-}
-
-% Laurent Siebenmann reports \Orb undefined with:
-% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
-% so we'll define it if necessary.
-%
-\ifx\Orb\undefined
-\def\Orb{\mathhexbox20D}
-\fi
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\envdef\titlepage{%
- % Open one extra group, as we want to close it in the middle of \Etitlepage.
- \begingroup
- \parindent=0pt \textfonts
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \let\page = \oldpage
- \page
- \null
- }%
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Macros to be used within @titlepage:
-
-\let\subtitlerm=\tenrm
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}
-
-\parseargdef\title{%
- \checkenv\titlepage
- \leftline{\titlefonts\rm #1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
- \checkenv\titlepage
- {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
- \def\temp{\quotation}%
- \ifx\thisenv\temp
- \def\quotationauthor{#1}% printed in \Equotation.
- \else
- \checkenv\titlepage
- \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\authorfont \leftline{#1}}%
- \fi
-}
-
-
-%%% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make TeX use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
-
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\HEADINGSoff{%
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
-\def\today{%
- \number\day\space
- \ifcase\month
- \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
- \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
- \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
- \fi
- \space\number\year}
-\fi
-
-% @settitle line... specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemindicate{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. However, if
- % what follows is an environment such as @example, there will be no
- % \parskip glue; then the negative vskip we just inserted would
- % cause the example and the item to crash together. So we use this
- % bizarre value of 10001 as a signal to \aboveenvbreak to insert
- % \parskip glue after all. Section titles are handled this way also.
- %
- \penalty 10001
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a list environment}}
-\def\itemx{\errmessage{@itemx while not in a list environment}}
-
-% @table, @ftable, @vtable.
-\envdef\table{%
- \let\itemindex\gobble
- \tablecheck{table}%
-}
-\envdef\ftable{%
- \def\itemindex ##1{\doind {fn}{\code{##1}}}%
- \tablecheck{ftable}%
-}
-\envdef\vtable{%
- \def\itemindex ##1{\doind {vr}{\code{##1}}}%
- \tablecheck{vtable}%
-}
-\def\tablecheck#1{%
- \ifnum \the\catcode`\^^M=\active
- \endgroup
- \errmessage{This command won't work in this context; perhaps the problem is
- that we are \inenvironment\thisenv}%
- \def\next{\doignore{#1}}%
- \else
- \let\next\tablex
- \fi
- \next
-}
-\def\tablex#1{%
- \def\itemindicate{#1}%
- \parsearg\tabley
-}
-\def\tabley#1{%
- {%
- \makevalueexpandable
- \edef\temp{\noexpand\tablez #1\space\space\space}%
- \expandafter
- }\temp \endtablez
-}
-\def\tablez #1 #2 #3 #4\endtablez{%
- \aboveenvbreak
- \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
- \ifnum 0#2>0 \tableindent=#2\mil \fi
- \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
- \itemmax=\tableindent
- \advance \itemmax by -\itemmargin
- \advance \leftskip by \tableindent
- \exdentamount=\tableindent
- \parindent = 0pt
- \parskip = \smallskipamount
- \ifdim \parskip=0pt \parskip=2pt \fi
- \let\item = \internalBitem
- \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\envdef\itemize{\parsearg\doitemize}
-
-\def\doitemize#1{%
- \aboveenvbreak
- \itemmax=\itemindent
- \advance\itemmax by -\itemmargin
- \advance\leftskip by \itemindent
- \exdentamount=\itemindent
- \parindent=0pt
- \parskip=\smallskipamount
- \ifdim\parskip=0pt \parskip=2pt \fi
- \def\itemcontents{#1}%
- % @itemize with no arg is equivalent to @itemize @bullet.
- \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
- \let\item=\itemizeitem
-}
-
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
- \advance\itemno by 1 % for enumerations
- {\let\par=\endgraf \smallbreak}% reasonable place to break
- {%
- % If the document has an @itemize directly after a section title, a
- % \nobreak will be last on the list, and \sectionheading will have
- % done a \vskip-\parskip. In that case, we don't want to zero
- % parskip, or the item text will crash with the heading. On the
- % other hand, when there is normal text preceding the item (as there
- % usually is), we do want to zero parskip, or there would be too much
- % space. In that case, we won't have a \nobreak before. At least
- % that's the theory.
- \ifnum\lastpenalty<10000 \parskip=0in \fi
- \noindent
- \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
- \vadjust{\penalty 1200}}% not good to break after first line of item.
- \flushcr
-}
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call \doitemize, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \doitemize{#1.}\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1. We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
- \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
- \else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
- % separator; typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
- \fi
- \go
-}
-
-% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
-%
-% A \tab used to include \hskip1sp. But then the space in a template
-% line is not enough. That is bad. So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
-% --karl, nathan@acm.org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
-% @multitable ... @end multitable definitions:
-%
-\newtoks\everytab % insert after every tab.
-%
-\envdef\multitable{%
- \vskip\parskip
- \startsavinginserts
- %
- % @item within a multitable starts a normal row.
- % We use \def instead of \let so that if one of the multitable entries
- % contains an @itemize, we don't choke on the \item (seen as \crcr aka
- % \endtemplate) expanding \doitemize.
- \def\item{\crcr}%
- %
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- %
- \everycr = {%
- \noalign{%
- \global\everytab={}%
- \global\colcount=0 % Reset the column counter.
- % Check for saved footnotes, etc.
- \checkinserts
- % Keeps underfull box messages off when table breaks over pages.
- %\filbreak
- % Maybe so, but it also creates really weird page breaks when the
- % table breaks over pages. Wouldn't \vfil be better? Wait until the
- % problem manifests itself, so it can be fixed for real --karl.
- }%
- }%
- %
- \parsearg\domultitable
-}
-\def\domultitable#1{%
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup &%
- \global\advance\colcount by 1
- \multistrut
- \vtop{%
- % Use the current \colcount to find the correct column width:
- \hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively
- % marking characters.
- \noindent\ignorespaces##\unskip\multistrut
- }\cr
-}
-\def\Emultitable{%
- \crcr
- \egroup % end the \halign
- \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
- \def\multistrut{\strut}% just use the standard line spacing
- %
- % Compute \multitablelinespace (if not defined by user) for use in
- % \multitableparskip calculation. We used define \multistrut based on
- % this, but (ironically) that caused the spacing to be off.
- % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-\fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
-
-
-\message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed. They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested. But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
- \expandafter\let\csname #1\endcsname = \relax
- \expandafter\let\csname iscond.#1\endcsname = 1
-}
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
-
-% Ignore @ignore, @ifhtml, @ifinfo, and the like.
-%
-\def\direntry{\doignore{direntry}}
-\def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
-\def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifxml{\doignore{ifxml}}
-\def\ignore{\doignore{ignore}}
-\def\menu{\doignore{menu}}
-\def\xml{\doignore{xml}}
-
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
-
-\def\doignore#1{\begingroup
- % Scan in ``verbatim'' mode:
- \catcode`\@ = \other
- \catcode`\{ = \other
- \catcode`\} = \other
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \spaceisspace
- %
- % Count number of #1's that we've seen.
- \doignorecount = 0
- %
- % Swallow text until we reach the matching `@end #1'.
- \dodoignore{#1}%
-}
-
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
- \obeylines %
- %
- \gdef\dodoignore#1{%
- % #1 contains the command name as a string, e.g., `ifinfo'.
- %
- % Define a command to find the next `@end #1', which must be on a line
- % by itself.
- \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
- % And this command to find another #1 command, at the beginning of a
- % line. (Otherwise, we would consider a line `@c @ifset', for
- % example, to count as an @ifset for nesting.)
- \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
- %
- % And now expand that command.
- \obeylines %
- \doignoretext ^^M%
- }%
-}
-
-\def\doignoreyyy#1{%
- \def\temp{#1}%
- \ifx\temp\empty % Nothing found.
- \let\next\doignoretextzzz
- \else % Found a nested condition, ...
- \advance\doignorecount by 1
- \let\next\doignoretextyyy % ..., look for another.
- % If we're here, #1 ends with ^^M\ifinfo (for example).
- \fi
- \next #1% the token \_STOP_ is present just after this macro.
-}
-
-% We have to swallow the remaining "\_STOP_".
-%
-\def\doignoretextzzz#1{%
- \ifnum\doignorecount = 0 % We have just found the outermost @end.
- \let\next\enddoignore
- \else % Still inside a nested condition.
- \advance\doignorecount by -1
- \let\next\doignoretext % Look for the next @end.
- \fi
- \next
-}
-
-% Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
-
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
-%
-\parseargdef\set{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- {%
- \makevalueexpandable
- \def\temp{#2}%
- \edef\next{\gdef\makecsname{SET#1}}%
- \ifx\temp\empty
- \next{}%
- \else
- \setzzz#2\endsetzzz
- \fi
- }%
-}
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\parseargdef\clear{%
- {%
- \makevalueexpandable
- \global\expandafter\let\csname SET#1\endcsname=\relax
- }%
-}
-
-% @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-{
- \catcode`\- = \active \catcode`\_ = \active
- %
- \gdef\makevalueexpandable{%
- \let\value = \expandablevalue
- % We don't want these characters active, ...
- \catcode`\-=\other \catcode`\_=\other
- % ..., but we might end up with active ones in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}, though.
- % So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
- }
-}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we call \makevalueexpandable in \indexdummies).
-% The command has to be fully expandable (if the variable is set), since
-% the result winds up in the index file. This means that if the
-% variable's value contains other Texinfo commands, it's almost certain
-% it will fail (although perhaps we could fix that with sufficient work
-% to do a one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \message{Variable `#1', used in @value, is not set.}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
- {%
- \makevalueexpandable
- \let\next=\empty
- \expandafter\ifx\csname SET#2\endcsname\relax
- #1% If not set, redefine \next.
- \fi
- \expandafter
- }\next
-}
-\def\ifsetfail{\doignore{ifset}}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
-%
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
-\def\ifclearfail{\doignore{ifclear}}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory=\comment
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}%
-}
-
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
- % Only do \closeout if we haven't already done it, else we'll end up
- % closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \undefined
- % The \closeout helps reduce unnecessary open files; the limit on the
- % Acorn RISC OS is a mere 16 files.
- \expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname\donesynindex#2\endcsname = 1
- \fi
- % redefine \fooindfile:
- \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
- \expandafter\let\csname#2indfile\endcsname=\temp
- % redefine \fooindex:
- \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-% Take care of Texinfo commands that can appear in an index entry.
-% Since there are some commands we want to expand, and others we don't,
-% we have to laboriously prevent expansion for those that we don't.
-%
-\def\indexdummies{%
- \def\@{@}% change to @@ when we switch to @ as escape char in index files.
- \def\ {\realbackslash\space }%
- % Need these in case \tex is in effect and \{ is a \delimiter again.
- % But can't use \lbracecmd and \rbracecmd because texindex assumes
- % braces and backslashes are used only as delimiters.
- \let\{ = \mylbrace
- \let\} = \myrbrace
- %
- % \definedummyword defines \#1 as \realbackslash #1\space, thus
- % effectively preventing its expansion. This is used only for control
- % words, not control letters, because the \space would be incorrect
- % for control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
- %
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
- }%
- \let\definedummyaccent\definedummyletter
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% For the aux file, @ is the escape character. So we want to redefine
-% everything using @ instead of \realbackslash. When everything uses
-% @, this will be simpler.
-%
-\def\atdummies{%
- \def\@{@@}%
- \def\ {@ }%
- \let\{ = \lbraceatcmd
- \let\} = \rbraceatcmd
- %
- % (See comments in \indexdummies.)
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{@##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{@##1}%
- }%
- \let\definedummyaccent\definedummyletter
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% Called from \indexdummies and \atdummies. \definedummyword and
-% \definedummyletter must be defined first.
-%
-\def\commondummies{%
- %
- \normalturnoffactive
- %
- \commondummiesnofonts
- %
- \definedummyletter{_}%
- %
- % Non-English letters.
- \definedummyword{AA}%
- \definedummyword{AE}%
- \definedummyword{L}%
- \definedummyword{OE}%
- \definedummyword{O}%
- \definedummyword{aa}%
- \definedummyword{ae}%
- \definedummyword{l}%
- \definedummyword{oe}%
- \definedummyword{o}%
- \definedummyword{ss}%
- \definedummyword{exclamdown}%
- \definedummyword{questiondown}%
- \definedummyword{ordf}%
- \definedummyword{ordm}%
- %
- % Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword{bf}%
- \definedummyword{gtr}%
- \definedummyword{hat}%
- \definedummyword{less}%
- \definedummyword{sf}%
- \definedummyword{sl}%
- \definedummyword{tclose}%
- \definedummyword{tt}%
- %
- \definedummyword{LaTeX}%
- \definedummyword{TeX}%
- %
- % Assorted special characters.
- \definedummyword{bullet}%
- \definedummyword{comma}%
- \definedummyword{copyright}%
- \definedummyword{registeredsymbol}%
- \definedummyword{dots}%
- \definedummyword{enddots}%
- \definedummyword{equiv}%
- \definedummyword{error}%
- \definedummyword{euro}%
- \definedummyword{expansion}%
- \definedummyword{minus}%
- \definedummyword{pounds}%
- \definedummyword{point}%
- \definedummyword{print}%
- \definedummyword{result}%
- %
- % Handle some cases of @value -- where it does not contain any
- % (non-fully-expandable) commands.
- \makevalueexpandable
- %
- % Normal spaces, not active ones.
- \unsepspaces
- %
- % No macro expansion.
- \turnoffmacros
-}
-
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-%
-% Better have this without active chars.
-{
- \catcode`\~=\other
- \gdef\commondummiesnofonts{%
- % Control letters and accents.
- \definedummyletter{!}%
- \definedummyaccent{"}%
- \definedummyaccent{'}%
- \definedummyletter{*}%
- \definedummyaccent{,}%
- \definedummyletter{.}%
- \definedummyletter{/}%
- \definedummyletter{:}%
- \definedummyaccent{=}%
- \definedummyletter{?}%
- \definedummyaccent{^}%
- \definedummyaccent{`}%
- \definedummyaccent{~}%
- \definedummyword{u}%
- \definedummyword{v}%
- \definedummyword{H}%
- \definedummyword{dotaccent}%
- \definedummyword{ringaccent}%
- \definedummyword{tieaccent}%
- \definedummyword{ubaraccent}%
- \definedummyword{udotaccent}%
- \definedummyword{dotless}%
- %
- % Texinfo font commands.
- \definedummyword{b}%
- \definedummyword{i}%
- \definedummyword{r}%
- \definedummyword{sc}%
- \definedummyword{t}%
- %
- % Commands that take arguments.
- \definedummyword{acronym}%
- \definedummyword{cite}%
- \definedummyword{code}%
- \definedummyword{command}%
- \definedummyword{dfn}%
- \definedummyword{emph}%
- \definedummyword{env}%
- \definedummyword{file}%
- \definedummyword{kbd}%
- \definedummyword{key}%
- \definedummyword{math}%
- \definedummyword{option}%
- \definedummyword{samp}%
- \definedummyword{strong}%
- \definedummyword{tie}%
- \definedummyword{uref}%
- \definedummyword{url}%
- \definedummyword{var}%
- \definedummyword{verb}%
- \definedummyword{w}%
- }
-}
-
-% \indexnofonts is used when outputting the strings to sort the index
-% by, and when constructing control sequence names. It eliminates all
-% control sequences and just writes whatever the best ASCII sort string
-% would be for a given command (usually its argument).
-%
-\def\indexnofonts{%
- % Accent commands should become @asis.
- \def\definedummyaccent##1{%
- \expandafter\let\csname ##1\endcsname\asis
- }%
- % We can just ignore other control letters.
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{}%
- }%
- % Hopefully, all control words can become @asis.
- \let\definedummyword\definedummyaccent
- %
- \commondummiesnofonts
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
- %
- \def\ { }%
- \def\@{@}%
- % how to handle braces?
- \def\_{\normalunderscore}%
- %
- % Non-English letters.
- \def\AA{AA}%
- \def\AE{AE}%
- \def\L{L}%
- \def\OE{OE}%
- \def\O{O}%
- \def\aa{aa}%
- \def\ae{ae}%
- \def\l{l}%
- \def\oe{oe}%
- \def\o{o}%
- \def\ss{ss}%
- \def\exclamdown{!}%
- \def\questiondown{?}%
- \def\ordf{a}%
- \def\ordm{o}%
- %
- \def\LaTeX{LaTeX}%
- \def\TeX{TeX}%
- %
- % Assorted special characters.
- % (The following {} will end up in the sort string, but that's ok.)
- \def\bullet{bullet}%
- \def\comma{,}%
- \def\copyright{copyright}%
- \def\registeredsymbol{R}%
- \def\dots{...}%
- \def\enddots{...}%
- \def\equiv{==}%
- \def\error{error}%
- \def\euro{euro}%
- \def\expansion{==>}%
- \def\minus{-}%
- \def\pounds{pounds}%
- \def\point{.}%
- \def\print{-|}%
- \def\result{=>}%
- %
- % Don't write macro names.
- \emptyusermacros
-}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% Most index entries go through here, but \dosubind is the general case.
-% #1 is the index name, #2 is the entry text.
-\def\doind#1#2{\dosubind{#1}{#2}{}}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% empty if called from \doind, as we usually are (the main exception
-% is with most defuns, which call us directly).
-%
-\def\dosubind#1#2#3{%
- \iflinks
- {%
- % Store the main index entry text (including the third arg).
- \toks0 = {#2}%
- % If third arg is present, precede it with a space.
- \def\thirdarg{#3}%
- \ifx\thirdarg\empty \else
- \toks0 = \expandafter{\the\toks0 \space #3}%
- \fi
- %
- \edef\writeto{\csname#1indfile\endcsname}%
- %
- \ifvmode
- \dosubindsanitize
- \else
- \dosubindwrite
- \fi
- }%
- \fi
-}
-
-% Write the entry in \toks0 to the index file:
-%
-\def\dosubindwrite{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
- \fi
- %
- % Remember, we are within a group.
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \escapechar=`\\
- \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- % Process the index entry with all font commands turned off, to
- % get the string to sort by.
- {\indexnofonts
- \edef\temp{\the\toks0}% need full expansion
- \xdef\indexsorttmp{\temp}%
- }%
- %
- % Set up the complete index entry, with both the sort key and
- % the original text, including any font commands. We write
- % three arguments to \entry to the .?? file (four in the
- % subentry case), texindex reduces to two when writing the .??s
- % sorted result.
- \edef\temp{%
- \write\writeto{%
- \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
- }%
- \temp
-}
-
-% Take care of unwanted page breaks:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again. Otherwise, the whatsit generated by the
-% \write will make \lastskip zero. The result is that sequences
-% like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode. We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip. \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip. The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
-%
-% ..., ready, GO:
-%
-\def\dosubindsanitize{%
- % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
- \skip0 = \lastskip
- \edef\lastskipmacro{\the\lastskip}%
- \count255 = \lastpenalty
- %
- % If \lastskip is nonzero, that means the last item was a
- % skip. And since a skip is discardable, that means this
- % -\skip0 glue we're inserting is preceded by a
- % non-discardable item, therefore it is not a potential
- % breakpoint, therefore no \nobreak needed.
- \ifx\lastskipmacro\zeroskipmacro
- \else
- \vskip-\skip0
- \fi
- %
- \dosubindwrite
- %
- \ifx\lastskipmacro\zeroskipmacro
- % If \lastskip was zero, perhaps the last item was a penalty, and
- % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
- % to re-insert the same penalty (values >10000 are used for various
- % signals); since we just inserted a non-discardable item, any
- % following glue (such as a \parskip) would be a breakpoint. For example:
- %
- % @deffn deffn-whatever
- % @vindex index-whatever
- % Description.
- % would allow a break between the index-whatever whatsit
- % and the "Description." paragraph.
- \ifnum\count255>9999 \penalty\count255 \fi
- \else
- % On the other hand, if we had a nonzero \lastskip,
- % this make-up glue would be preceded by a non-discardable item
- % (the whatsit from the \write), so we must insert a \nobreak.
- \nobreak\vskip\skip0
- \fi
-}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\parseargdef\printindex{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \smallfonts \rm
- \tolerance = 9500
- \everypar = {}% don't want the \kern\-parindent from indentation suppression.
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- \putwordIndexNonexistent
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- \putwordIndexIsEmpty
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\backslashcurfont}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \nobreak
- \vskip 0pt plus 3\baselineskip
- \penalty 0
- \vskip 0pt plus -3\baselineskip
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- % Do our best not to break after the initial.
- \nobreak
- \vskip .33\baselineskip plus .1\baselineskip
-}}
-
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin. It is used for index
-% and table of contents entries. The paragraph is indented by \leftskip.
-%
-% A straightforward implementation would start like this:
-% \def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
-% @code, which sets - active. This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-%
-% The right solution is to prevent \entry from swallowing the whole text.
-% --kasal, 21nov03
-\def\entry{%
- \begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing
- % columns.
- \vskip 0pt plus1pt
- %
- % Swallow the left brace of the text (first parameter):
- \afterassignment\doentry
- \let\temp =
-}
-\def\doentry{%
- \bgroup % Instead of the swallowed brace.
- \noindent
- \aftergroup\finishentry
- % And now comes the text of the entry.
-}
-\def\finishentry#1{%
- % #1 is the page number.
- %
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \def\tempa{{\rm }}%
- \def\tempb{#1}%
- \edef\tempc{\tempa}%
- \edef\tempd{\tempb}%
- \ifx\tempc\tempd
- \ %
- \else
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#1.%
- \ \the\toksA
- \else
- \ #1%
- \fi
- \fi
- \par
- \endgroup
-}
-
-% Like \dotfill except takes at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-\def\secondary#1#2{{%
- \parfillskip=0in
- \parskip=0in
- \hangindent=1in
- \hangafter=1
- \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- #2
- \fi
- \par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case we just ship out what is in \partialpage with the normal
- % output routine. Generally, \partialpage will be empty when this
- % runs and this will be a no-op. See the indexspread.tex test case.
- \ifvoid\partialpage \else
- \onepageout{\pagecontents\partialpage}%
- \fi
- %
- \global\setbox\partialpage = \vbox{%
- % Unvbox the main output page.
- \unvbox\PAGE
- \kern-\topskip \kern\baselineskip
- }%
- }%
- \eject % run that output routine to set \partialpage
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- \advance\dimen@ by -\ht\partialpage
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-%
-% All done with double columns.
-\def\enddoublecolumns{%
- \output = {%
- % Split the last of the double-column material. Leave it on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- }%
- \eject
- \endgroup % started in \begindoublecolumns
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize (after the
- % \endgroup where \vsize got restored).
- \pagegoal = \vsize
-}
-%
-% Called at the end of the double column material.
-\def\balancecolumns{%
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-% \unnumberedno is an oxymoron, of course. But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number". We avoid collisions with chapter
-% numbers by starting them at 10000. (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-%
-% \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-%
-\def\appendixletter{%
- \ifnum\appendixno=`A A%
- \else\ifnum\appendixno=`B B%
- \else\ifnum\appendixno=`C C%
- \else\ifnum\appendixno=`D D%
- \else\ifnum\appendixno=`E E%
- \else\ifnum\appendixno=`F F%
- \else\ifnum\appendixno=`G G%
- \else\ifnum\appendixno=`H H%
- \else\ifnum\appendixno=`I I%
- \else\ifnum\appendixno=`J J%
- \else\ifnum\appendixno=`K K%
- \else\ifnum\appendixno=`L L%
- \else\ifnum\appendixno=`M M%
- \else\ifnum\appendixno=`N N%
- \else\ifnum\appendixno=`O O%
- \else\ifnum\appendixno=`P P%
- \else\ifnum\appendixno=`Q Q%
- \else\ifnum\appendixno=`R R%
- \else\ifnum\appendixno=`S S%
- \else\ifnum\appendixno=`T T%
- \else\ifnum\appendixno=`U U%
- \else\ifnum\appendixno=`V V%
- \else\ifnum\appendixno=`W W%
- \else\ifnum\appendixno=`X X%
- \else\ifnum\appendixno=`Y Y%
- \else\ifnum\appendixno=`Z Z%
- % The \the is necessary, despite appearances, because \appendixletter is
- % expanded while writing the .toc file. \char\appendixno is not
- % expandable, thus it is written literally, thus all appendixes come out
- % with the same letter (or @) in the toc without it.
- \else\char\the\appendixno
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-% However, they are not reliable, because we don't use marks.
-\def\thischapter{}
-\def\thissection{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
- % Compute the abs. sec. level:
- \absseclevel=#2
- \advance\absseclevel by \secbase
- % Make sure \absseclevel doesn't fall outside the range:
- \ifnum \absseclevel < 0
- \absseclevel = 0
- \else
- \ifnum \absseclevel > 3
- \absseclevel = 3
- \fi
- \fi
- % The heading type:
- \def\headtype{#1}%
- \if \headtype U%
- \ifnum \absseclevel < \unmlevel
- \chardef\unmlevel = \absseclevel
- \fi
- \else
- % Check for appendix sections:
- \ifnum \absseclevel = 0
- \edef\chapheadtype{\headtype}%
- \else
- \if \headtype A\if \chapheadtype N%
- \errmessage{@appendix... within a non-appendix chapter}%
- \fi\fi
- \fi
- % Check for numbered within unnumbered:
- \ifnum \absseclevel > \unmlevel
- \def\headtype{U}%
- \else
- \chardef\unmlevel = 3
- \fi
- \fi
- % Now print the heading:
- \if \headtype U%
- \ifcase\absseclevel
- \unnumberedzzz{#3}%
- \or \unnumberedseczzz{#3}%
- \or \unnumberedsubseczzz{#3}%
- \or \unnumberedsubsubseczzz{#3}%
- \fi
- \else
- \if \headtype A%
- \ifcase\absseclevel
- \appendixzzz{#3}%
- \or \appendixsectionzzz{#3}%
- \or \appendixsubseczzz{#3}%
- \or \appendixsubsubseczzz{#3}%
- \fi
- \else
- \ifcase\absseclevel
- \chapterzzz{#3}%
- \or \seczzz{#3}%
- \or \numberedsubseczzz{#3}%
- \or \numberedsubsubseczzz{#3}%
- \fi
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v. By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
-%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
- % section resetting is \global in case the chapter is in a group, such
- % as an @include file.
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\chapno by 1
- %
- % Used for \float.
- \gdef\chaplevelprefix{\the\chapno.}%
- \resetallfloatnos
- %
- \message{\putwordChapter\space \the\chapno}%
- %
- % Write the actual heading.
- \chapmacro{#1}{Ynumbered}{\the\chapno}%
- %
- % So @section and the like are numbered underneath this chapter.
- \global\let\section = \numberedsec
- \global\let\subsection = \numberedsubsec
- \global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\appendixno by 1
- \gdef\chaplevelprefix{\appendixletter.}%
- \resetallfloatnos
- %
- \def\appendixnum{\putwordAppendix\space \appendixletter}%
- \message{\appendixnum}%
- %
- \chapmacro{#1}{Yappendix}{\appendixletter}%
- %
- \global\let\section = \appendixsec
- \global\let\subsection = \appendixsubsec
- \global\let\subsubsection = \appendixsubsubsec
-}
-
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
- %
- % Since an unnumbered has no number, no prefix for figures.
- \global\let\chaplevelprefix = \empty
- \resetallfloatnos
- %
- % This used to be simply \message{#1}, but TeX fully expands the
- % argument to \message. Therefore, if #1 contained @-commands, TeX
- % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
- % expanded @cite (which turns out to cause errors because \cite is meant
- % to be executed, not expanded).
- %
- % Anyway, we don't want the fully-expanded definition of @cite to appear
- % as a result of the \message, we just want `@cite' itself. We use
- % \the<toks register> to achieve this: TeX expands \the<toks> only once,
- % simply yielding the contents of <toks register>. (We also do this for
- % the toc entries.)
- \toks0 = {#1}%
- \message{(\the\toks0)}%
- %
- \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
- %
- \global\let\section = \unnumberedsec
- \global\let\subsection = \unnumberedsubsec
- \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
- % Well, we could do the following in a group, but that would break
- % an assumption that \chapmacro is called at the outermost level.
- % Thus we are safer this way: --kasal, 24feb04
- \let\centerparametersmaybe = \centerparameters
- \unnmhead0{#1}%
- \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
-% Sections.
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
-}
-
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
-}
-\let\appendixsec\appendixsection
-
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
-}
-
-% Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
-}
-
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno}%
-}
-
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
-}
-
-% Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynumbered}%
- {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-
-\def\majorheading{%
- {\advance\chapheadingskip by 10pt \chapbreak }%
- \parsearg\chapheadingzzz
-}
-
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
- {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
- \bigskip \par\penalty 200\relax
- \suppressfirstparagraphindent
-}
-
-% @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-%%% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-%%% Define plain chapter starts, and page on/off switching for it
-% Parameter controlling skip before chapter headings (if needed)
-
-\newskip\chapheadingskip
-
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{%
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-% Chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-\def\Yappendixkeyword{Yappendix}
-%
-\def\chapmacro#1#2#3{%
- \pchapsepmacro
- {%
- \chapfonts \rm
- %
- % Have to define \thissection before calling \donoderef, because the
- % xref code eventually uses it. On the other hand, it has to be called
- % after \pchapsepmacro, or the headline will change too soon.
- \gdef\thissection{#1}%
- \gdef\thischaptername{#1}%
- %
- % Only insert the separating space if we have a chapter/appendix
- % number, and don't print the unnumbered ``number''.
- \def\temptype{#2}%
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unnchap}%
- \def\thischapter{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
- \def\toctype{omit}%
- \xdef\thischapter{}%
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
- \def\toctype{app}%
- % We don't substitute the actual chapter name into \thischapter
- % because we don't want its macros evaluated now. And we don't
- % use \thissection because that changes with each section.
- %
- \xdef\thischapter{\putwordAppendix{} \appendixletter:
- \noexpand\thischaptername}%
- \else
- \setbox0 = \hbox{#3\enspace}%
- \def\toctype{numchap}%
- \xdef\thischapter{\putwordChapter{} \the\chapno:
- \noexpand\thischaptername}%
- \fi\fi\fi
- %
- % Write the toc entry for this chapter. Must come before the
- % \donoderef, because we include the current node name in the toc
- % entry, and \donoderef resets it to empty.
- \writetocentry{\toctype}{#1}{#3}%
- %
- % For pdftex, we have to write out the node definition (aka, make
- % the pdfdest) after any page break, but before the actual text has
- % been typeset. If the destination for the pdf outline is after the
- % text, then jumping from the outline may wind up with the text not
- % being visible, for instance under high magnification.
- \donoderef{#2}%
- %
- % Typeset the actual heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerparameters{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
-}
-
-
-% I don't think this chapter style is supported any more, so I'm not
-% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-%
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
-}
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
-}
-\def\CHAPFopen{%
- \global\let\chapmacro=\chfopen
- \global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles. These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
-
-% Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
-
-% Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
-
-
-% Print any size, any type, section title.
-%
-% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
-% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
-% section number.
-%
-\def\sectionheading#1#2#3#4{%
- {%
- % Switch to the right set of fonts.
- \csname #2fonts\endcsname \rm
- %
- % Insert space above the heading.
- \csname #2headingbreak\endcsname
- %
- % Only insert the space after the number if we have a section number.
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
- %
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unn}%
- \gdef\thissection{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- % for @headings -- no section number, don't include in toc,
- % and don't redefine \thissection.
- \setbox0 = \hbox{}%
- \def\toctype{omit}%
- \let\sectionlevel=\empty
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{app}%
- \gdef\thissection{#1}%
- \else
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{num}%
- \gdef\thissection{#1}%
- \fi\fi\fi
- %
- % Write the toc entry (before \donoderef). See comments in \chfplain.
- \writetocentry{\toctype\sectionlevel}{#1}{#4}%
- %
- % Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chfplain.
- \donoderef{#3}%
- %
- % Output the actual section heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 % zero if no section number
- \unhbox0 #1}%
- }%
- % Add extra space after the heading -- half of whatever came above it.
- % Don't allow stretch, though.
- \kern .5 \csname #2headingskip\endcsname
- %
- % Do not let the kern be a potential breakpoint, as it would be if it
- % was followed by glue.
- \nobreak
- %
- % We'll almost certainly start a paragraph next, so don't let that
- % glue accumulate. (Not a breakpoint because it's preceded by a
- % discardable item.)
- \vskip-\parskip
- %
- % This is purely so the last item on the list is a known \penalty >
- % 10000. This is so \startdefun can avoid allowing breakpoints after
- % section headings. Otherwise, it would insert a valid breakpoint between:
- %
- % @section sec-whatever
- % @deffn def-whatever
- \penalty 10001
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this. The node name is used in the pdf outlines as the
-% destination to jump to.
-%
-% We open the .toc file for writing here instead of at @setfilename (or
-% any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything. This is used for the
-% table of contents chapter openings themselves.
-%
-\newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
-\def\writetocentry#1#2#3{%
- \edef\writetoctype{#1}%
- \ifx\writetoctype\omitkeyword \else
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- %
- \iflinks
- \toks0 = {#2}%
- \toks2 = \expandafter{\lastnode}%
- \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
- {\the\toks2}{\noexpand\folio}}}%
- \temp
- \fi
- \fi
- %
- % Tell \shipout to create a pdf destination on each page, if we're
- % writing pdf. These are used in the table of contents. We can't
- % just write one on every page because the title pages are numbered
- % 1 and 2 (the page numbers aren't printed), and so are the first
- % two pages of the document. Thus, we'd have two destinations named
- % `1', and two named `2'.
- \ifpdf \global\pdfmakepagedesttrue \fi
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Prepare to read what we've written to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \def\thischapter{}%
- \chapmacro{#1}{Yomitfromtoc}{}%
- %
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- % We can't do this, because then an actual ^ in a section
- % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
- %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
-}
-
-
-% Normal (long) toc.
-\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \input \jobname.toc
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \ifeof 1 \else
- \pdfmakeoutlines
- \fi
- \closein 1
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\numchapentry = \shortchapentry
- \let\appentry = \shortchapentry
- \let\unnchapentry = \shortunnchapentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf
- \let\sl=\shortcontsl \let\tt=\shortconttt
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\numsecentry##1##2##3##4{}
- \let\appsecentry = \numsecentry
- \let\unnsecentry = \numsecentry
- \let\numsubsecentry = \numsecentry
- \let\appsubsecentry = \numsecentry
- \let\unnsubsecentry = \numsecentry
- \let\numsubsubsecentry = \numsecentry
- \let\appsubsubsecentry = \numsecentry
- \let\unnsubsubsecentry = \numsecentry
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \input \jobname.toc
- \fi
- \closein 1
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
- % This space should be enough, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % But use \hss just in case.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- %
- % We'd like to right-justify chapter numbers, but that looks strange
- % with appendix letters. And right-justifying numbers and
- % left-justifying letters looks strange when there is less than 10
- % chapters. Have to read the whole toc once to know how many chapters
- % there are before deciding ...
- \hbox to 1em{#1\hss}%
-}
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-%
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
-}
-
-% Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
-%
-\def\appendixbox#1{%
- % We use M since it's probably the widest letter.
- \setbox0 = \hbox{\putwordAppendix{} M}%
- \hbox to \wd0{\putwordAppendix{} #1\hss}}
-%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
-
-% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
-
-% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
-
-% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
-
-% This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{%
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
-
-\envdef\tex{%
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
- \catcode `\%=14
- \catcode `\+=\other
- \catcode `\"=\other
- \catcode `\|=\other
- \catcode `\<=\other
- \catcode `\>=\other
- \escapechar=`\\
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\/=\ptexslash
- \let\*=\ptexstar
- \let\t=\ptext
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-}
-% There is no need to define \Etex.
-
-% Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip.
-%
-\def\aboveenvbreak{{%
- % =10000 instead of <10000 because of a special case in \itemzzz and
- % \sectionheading, q.v.
- \ifnum \lastpenalty=10000 \else
- \advance\envskipamount by \parskip
- \endgraf
- \ifdim\lastskip<\envskipamount
- \removelastskip
- % it's not a good place to break if the last penalty was \nobreak
- % or better ...
- \ifnum\lastpenalty<10000 \penalty-50 \fi
- \vskip\envskipamount
- \fi
- \fi
-}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\envdef\cartouche{%
- \ifhmode\par\fi % can't be in the midst of a paragraph.
- \startsavinginserts
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt % we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
- % side, and for 6pt waste from
- % each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \kern3pt
- \hsize=\cartinner
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
- \comment % For explanation, see the end of \def\group.
-}
-\def\Ecartouche{%
- \ifhmode\par\fi
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
- \checkinserts
-}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\def\nonfillstart{%
- \aboveenvbreak
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- \parindent = 0pt
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- % @cartouche defines \nonarrowing to inhibit narrowing
- % at next level down.
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \fi
- \let\exdent=\nofillexdent
-}
-
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-% @example, @display, @format, @lisp
-%
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
- \ifx\SETdispenvsize\smallword
- \smallexamplefonts \rm
- \fi
-}
-\def\setsmalldispenv{%
- \ifx\SETdispenvsize\nosmallword
- \else
- \smallexamplefonts \rm
- \fi
-}
-
-% We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
- \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
- \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
- \expandafter\let\csname E#1\endcsname \afterenvbreak
- \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
-}
-
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
- \makedispenv{#1}{#3}
- \makedispenv{#2}{#3}
-}
-
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
-%
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel@xerox.
-%
-\maketwodispenvs {lisp}{example}{%
- \nonfillstart
- \tt
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-
-% @display/@smalldisplay: same as @lisp except keep current font.
-%
-\makedispenv {display}{%
- \nonfillstart
- \gobble
-}
-
-% @format/@smallformat: same as @display except don't narrow margins.
-%
-\makedispenv{format}{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-\let\Eflushleft = \afterenvbreak
-
-% @flushright.
-%
-\envdef\flushright{%
- \let\nonarrowing = t%
- \nonfillstart
- \advance\leftskip by 0pt plus 1fill
- \gobble
-}
-\let\Eflushright = \afterenvbreak
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins. We keep \parskip nonzero in general, since
-% we're doing normal filling. So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
-%
-\envdef\quotation{%
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \parindent=0pt
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \let\nonarrowing = \relax
- \fi
- \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
- \par
- \ifx\quotationauthor\undefined\else
- % indent a bit.
- \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
- \fi
- {\parskip=0pt \afterenvbreak}%
-}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
- \def\temp{#1}%
- \ifx\temp\empty \else
- {\bf #1: }%
- \fi
-}
-
-
-% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
-%
-% [Knuth] p.344; only we need to do the other characters Texinfo sets
-% active too. Otherwise, they get lost as the first character on a
-% verbatim line.
-\def\dospecials{%
- \do\ \do\\\do\{\do\}\do\$\do\&%
- \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
- \do\<\do\>\do\|\do\@\do+\do\"%
-}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=\other}\dospecials}
-%
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
- \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
- \def\par{\leavevmode\endgraf}%
- \catcode`\`=\active
- \tabeightspaces
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-\def\starttabbox{\setbox0=\hbox\bgroup}
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabexpand{%
- \catcode`\^^I=\active
- \def^^I{\leavevmode\egroup
- \dimen0=\wd0 % the width so far, or since the previous tab
- \divide\dimen0 by\tabw
- \multiply\dimen0 by\tabw % compute previous multiple of \tabw
- \advance\dimen0 by\tabw % advance to next multiple of \tabw
- \wd0=\dimen0 \box0 \starttabbox
- }%
- }
-\endgroup
-\def\setupverbatim{%
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- % Easiest (and conventionally used) font for verbatim
- \tt
- \def\par{\leavevmode\egroup\box0\endgraf}%
- \catcode`\`=\active
- \tabexpand
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
- \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-% \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
- \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-% \def\doverbatim#1@end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'.
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%
-\begingroup
- \catcode`\ =\active
- \obeylines %
- % ignore everything up to the first ^^M, that's the newline at the end
- % of the @verbatim input line itself. Otherwise we get an extra blank
- % line in the output.
- \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
- % We really want {...\end verbatim} in the body of the macro, but
- % without the active space; thus we have to use \xdef and \gobble.
-\endgroup
-%
-\envdef\verbatim{%
- \setupverbatim\doverbatim
-}
-\let\Everbatim = \afterenvbreak
-
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
-%
-\def\doverbatiminclude#1{%
- {%
- \makevalueexpandable
- \setupverbatim
- \input #1
- \afterenvbreak
- }%
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later.
-%
-% We save the uninterpreted tokens, rather than creating a box.
-% Saving the text in a box would be much easier, but then all the
-% typesetting commands (@smallbook, font changes, etc.) have to be done
-% beforehand -- and a) we want @copying to be done first in the source
-% file; b) letting users define the frontmatter in as flexible order as
-% possible is very desirable.
-%
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
- \begingroup
- \parindent = 0pt % paragraph indentation looks wrong on title page
- \scanexp\copyingtext
- \endgroup
-}
-
-\message{defuns,}
-% @defun etc.
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-
-% Start the processing of @deffn:
-\def\startdefun{%
- \ifnum\lastpenalty<10000
- \medbreak
- \else
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check specifically for penalty 10002, inserted
- % by \defargscommonending, instead of 10000, since the sectioning
- % commands also insert a nobreak penalty, and we don't want to allow
- % a break between a section heading and a defun.
- %
- \ifnum\lastpenalty=10002 \penalty2000 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \medskip % preceded by discardable penalty, so not a breakpoint
- \fi
- %
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
-}
-
-\def\dodefunx#1{%
- % First, check whether we are in the right environment:
- \checkenv#1%
- %
- % As above, allow line break if we have multiple x headers in a row.
- % It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty3000 \fi
- %
- % And now, it's time to reuse the body of the original defun:
- \expandafter\gobbledefun#1%
-}
-\def\gobbledefun#1\startdefun{}
-
-% \printdefunline \deffnheader{text}
-%
-\def\printdefunline#1#2{%
- \begingroup
- % call \deffnheader:
- #1#2 \endheader
- % common ending:
- \interlinepenalty = 10000
- \advance\rightskip by 0pt plus 1fil
- \endgraf
- \nobreak\vskip -\parskip
- \penalty 10002 % signal to \startdefun and \dodefunx
- % Some of the @defun-type tags do not enable magic parentheses,
- % rendering the following check redundant. But we don't optimize.
- \checkparencounts
- \endgroup
-}
-
-\def\Edefun{\endgraf\medbreak}
-
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
-%
-\def\makedefun#1{%
- \expandafter\let\csname E#1\endcsname = \Edefun
- \edef\temp{\noexpand\domakedefun
- \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
- \temp
-}
-
-% \domakedefun \deffn \deffnx \deffnheader
-%
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
-%
-\def\domakedefun#1#2#3{%
- \envdef#1{%
- \startdefun
- \parseargusing\activeparens{\printdefunline#3}%
- }%
- \def#2{\dodefunx#1}%
- \def#3%
-}
-
-%%% Untyped functions:
-
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
-
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
-
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deffngeneral {subind}category name args
-%
-\def\deffngeneral#1#2 #3 #4\endheader{%
- % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
- \dosubind{fn}{\code{#3}}{#1}%
- \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
-}
-
-%%% Typed functions:
-
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
-
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
-
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypefngeneral {subind}category type name args
-%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{fn}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-%%% Typed variables:
-
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
-
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
-
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{vr}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-%%% Untyped variables:
-
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
-
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
-
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-
-%%% Type:
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
- \doind{tp}{\code{#2}}%
- \defname{#1}{}{#2}\defunargs{#3\unskip}%
-}
-
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
-%
-% We are followed by (but not passed) the arguments, if any.
-%
-\def\defname#1#2#3{%
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \advance\leftskip by -\defbodyindent
- %
- % How we'll format the type name. Putting it in brackets helps
- % distinguish it from the body text that may end up on the next line
- % just below it.
- \def\temp{#1}%
- \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
- %
- % Figure out line sizes for the paragraph shape.
- % The first line needs space for \box0; but if \rightskip is nonzero,
- % we need only space for the part of \box0 which exceeds it:
- \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
- % The continuations:
- \dimen2=\hsize \advance\dimen2 by -\defargsindent
- % (plain.tex says that \dimen1 should be used only as global.)
- \parshape 2 0in \dimen0 \defargsindent \dimen2
- %
- % Put the type name to the right margin.
- \noindent
- \hbox to 0pt{%
- \hfil\box0 \kern-\hsize
- % \hsize has to be shortened this way:
- \kern\leftskip
- % Intentionally do not respect \rightskip, since we need the space.
- }%
- %
- % Allow all lines to be underfull without complaint:
- \tolerance=10000 \hbadness=10000
- \exdentamount=\defbodyindent
- {%
- % defun fonts. We use typewriter by default (used to be bold) because:
- % . we're printing identifiers, they should be in tt in principle.
- % . in languages with many accents, such as Czech or French, it's
- % common to leave accents off identifiers. The result looks ok in
- % tt, but exceedingly strange in rm.
- % . we don't want -- and --- to be treated as ligatures.
- % . this still does not fix the ?` and !` ligatures, but so far no
- % one has made identifiers using them :).
- \df \tt
- \def\temp{#2}% return value type
- \ifx\temp\empty\else \tclose{\temp} \fi
- #3% output function name
- }%
- {\rm\enskip}% hskip 0.5 em of \tenrm
- %
- \boldbrax
- % arguments will be output next, if any.
-}
-
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name. This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable. Prevent hyphenation at `-' chars.
-%
-\def\defunargs#1{%
- % use sl by default (not ttsl),
- % tt for the names.
- \df \sl \hyphenchar\font=0
- %
- % On the other hand, if an argument has two dashes (for instance), we
- % want a way to get ttsl. Let's try @var for that.
- \let\var=\ttslanted
- #1%
- \sl\hyphenchar\font=45
-}
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
- \catcode`\(=\active \catcode`\)=\active
- \catcode`\[=\active \catcode`\]=\active
- \catcode`\&=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
- \activeparens
- \global\let(=\lparen \global\let)=\rparen
- \global\let[=\lbrack \global\let]=\rbrack
- \global\let& = \&
-
- \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
- \gdef\magicamp{\let&=\amprm}
-}
-
-\newcount\parencount
-
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\ }}
-
-\def\parenfont{%
- \ifampseen
- % At the first level, print parens in roman,
- % otherwise use the default font.
- \ifnum \parencount=1 \rm \fi
- \else
- % The \sf parens (in \boldbrax) actually are a little bolder than
- % the contained text. This is especially needed for [ and ] .
- \sf
- \fi
-}
-\def\infirstlevel#1{%
- \ifampseen
- \ifnum\parencount=1
- #1%
- \fi
- \fi
-}
-\def\bfafterword#1 {#1 \bf}
-
-\def\opnr{%
- \global\advance\parencount by 1
- {\parenfont(}%
- \infirstlevel \bfafterword
-}
-\def\clnr{%
- {\parenfont)}%
- \infirstlevel \sl
- \global\advance\parencount by -1
-}
-
-\newcount\brackcount
-\def\lbrb{%
- \global\advance\brackcount by 1
- {\bf[}%
-}
-\def\rbrb{%
- {\bf]}%
- \global\advance\brackcount by -1
-}
-
-\def\checkparencounts{%
- \ifnum\parencount=0 \else \badparencount \fi
- \ifnum\brackcount=0 \else \badbrackcount \fi
-}
-\def\badparencount{%
- \errmessage{Unbalanced parentheses in @def}%
- \global\parencount=0
-}
-\def\badbrackcount{%
- \errmessage{Unbalanced square braces in @def}%
- \global\brackcount=0
-}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scantokens#1{%
- \toks0={#1}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \input \jobname.tmp
- }
-\fi
-
-\def\scanmacro#1{%
- \begingroup
- \newlinechar`\^^M
- \let\xeatspaces\eatspaces
- % Undo catcode changes of \startcontents and \doprintindex
- % When called from @insertcopying or (short)caption, we need active
- % backslash to get it printed correctly. Previously, we had
- % \catcode`\\=\other instead. We'll see whether a problem appears
- % with macro expansion. --kasal, 19aug04
- \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
- % ... and \example
- \spaceisspace
- %
- % Append \endinput to make sure that TeX does not see the ending newline.
- %
- % I've verified that it is necessary both for e-TeX and for ordinary TeX
- % --kasal, 29nov03
- \scantokens{#1\endinput}%
- \endgroup
-}
-
-\def\scanexp#1{%
- \edef\temp{\noexpand\scanmacro{#1}}%
- \temp
-}
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-\def\macrolist{} % List of all defined macros in the form
- % \do\macro1\do\macro2...
-
-% Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-% \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-%
-\def\cslet#1#2{%
- \expandafter\let
- \csname#1\expandafter\endcsname
- \csname#2\endcsname
-}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=\other \catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\scanctxt{%
- \catcode`\"=\other
- \catcode`\+=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\@=\other
- \catcode`\^=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\~=\other
-}
-
-\def\scanargctxt{%
- \scanctxt
- \catcode`\\=\other
- \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{%
- \scanctxt
- \catcode`\{=\other
- \catcode`\}=\other
- \catcode`\^^M=\other
- \usembodybackslash
-}
-
-\def\macroargctxt{%
- \scanctxt
- \catcode`\\=\other
-}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0%
- \else
- \expandafter\parsemargdef \argl;%
- \fi
- \if1\csname ismacro.\the\macname\endcsname
- \message{Warning: redefining \the\macname}%
- \else
- \expandafter\ifx\csname \the\macname\endcsname \relax
- \else \errmessage{Macro name \the\macname\space already defined}\fi
- \global\cslet{macsave.\the\macname}{\the\macname}%
- \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- % Add the macroname to \macrolist
- \toks0 = \expandafter{\macrolist\do}%
- \xdef\macrolist{\the\toks0
- \expandafter\noexpand\csname\the\macname\endcsname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\parseargdef\unmacro{%
- \if1\csname ismacro.#1\endcsname
- \global\cslet{#1}{macsave.#1}%
- \global\expandafter\let \csname ismacro.#1\endcsname=0%
- % Remove the macro name from \macrolist:
- \begingroup
- \expandafter\let\csname#1\endcsname \relax
- \let\do\unmacrodo
- \xdef\macrolist{\macrolist}%
- \endgroup
- \else
- \errmessage{Macro #1 not defined}%
- \fi
-}
-
-% Called by \do from \dounmacro on each macro. The idea is to omit any
-% macro definitions that have been changed to \relax.
-%
-\def\unmacrodo#1{%
- \ifx#1\relax
- % remove this
- \else
- \noexpand\do \noexpand #1%
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
- \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1%
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \fi
- \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \next}
-
-% We want to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-% For \indexnofonts, we need to get rid of all macros, leaving only the
-% arguments (if present). Of course this is not nearly correct, but it
-% is the best we can do for now. makeinfo does not expand macros in the
-% argument to @deffn, which ends up writing an index entry, and texindex
-% isn't prepared for an index sort entry that starts with \.
-%
-% Since macro invocations are followed by braces, we can just redefine them
-% to take a single TeX argument. The case of a macro invocation that
-% goes to end-of-line is not handled.
-%
-\def\emptyusermacros{\begingroup
- \def\do##1{\let\noexpand##1=\noexpand\asis}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign. Just make them active and then expand them all to nothing.
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
- {%
- \expandafter\let\obeyedspace=\empty
- \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
- }%
- \next
-}
-
-
-\message{cross references,}
-
-\newwrite\auxfile
-
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references. The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross, , , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-
-\let\nwnode=\node
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node. #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
- \ifx\lastnode\empty\else
- \setref{\lastnode}{#1}%
- \global\let\lastnode=\empty
- \fi
-}
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
-% or the anchor name.
-% 2) NAME-snt - section number and type, passed as the SNT arg, or
-% empty for anchors.
-% 3) NAME-pg - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat. In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof - the text as it should appear in a @listoffloats.
-%
-\def\setref#1#2{%
- \pdfmkdest{#1}%
- \iflinks
- {%
- \atdummies % preserve commands, but don't expand them
- \turnoffactive
- \otherbackslash
- \edef\writexrdef##1##2{%
- \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
- ##1}{##2}}% these are parameters of \writexrdef
- }%
- \toks0 = \expandafter{\thissection}%
- \immediate \writexrdef{title}{\the\toks0 }%
- \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
- \writexrdef{pg}{\folio}% will be written later, during \shipout
- }%
- \fi
-}
-
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \unsepspaces
- \def\printedmanual{\ignorespaces #5}%
- \def\printedrefname{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual\unskip}%
- \setbox0=\hbox{\printedrefname\unskip}%
- \ifdim \wd0 = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
- % Use the node name inside the square brackets.
- \def\printedrefname{\ignorespaces #1}%
- \else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
- \def\printedrefname{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printedrefname{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % Make link in pdf output.
- \ifpdf
- \leavevmode
- \getfilename{#4}%
- {\turnoffactive \otherbackslash
- \ifnum\filenamelength>0
- \startlink attr{/Border [0 0 0]}%
- goto file{\the\filename.pdf} name{#1}%
- \else
- \startlink attr{/Border [0 0 0]}%
- goto name{\pdfmkpgn{#1}}%
- \fi
- }%
- \linkcolor
- \fi
- %
- % Float references are printed completely differently: "Figure 1.2"
- % instead of "[somenode], p.3". We distinguish them by the
- % LABEL-title being set to a magic string.
- {%
- % Have to otherify everything special to allow the \csname to
- % include an _ in the xref name, etc.
- \indexnofonts
- \turnoffactive
- \otherbackslash
- \expandafter\global\expandafter\let\expandafter\Xthisreftitle
- \csname XR#1-title\endcsname
- }%
- \iffloat\Xthisreftitle
- % If the user specified the print name (third arg) to the ref,
- % print it instead of our usual "Figure 1.2".
- \ifdim\wd0 = 0pt
- \refx{#1-snt}%
- \else
- \printedrefname
- \fi
- %
- % if the user also gave the printed manual name (fifth arg), append
- % "in MANUALNAME".
- \ifdim \wd1 > 0pt
- \space \putwordin{} \cite{\printedmanual}%
- \fi
- \else
- % node/anchor (non-float) references.
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\turnoffactive \otherbackslash
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % output the `[mynode]' via a macro so it can be overridden.
- \xrefprintnodename\printedrefname
- %
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
- \fi
- \fi
- \endlink
-\endgroup}
-
-% This macro is called from \xrefX for the `[nodename]' part of xref
-% output. It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents. Particularly
-% one that Bob is working on :).
-%
-\def\xrefprintnodename#1{[#1]}
-
-% Things referred to by \setref.
-%
-\def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
- \ifnum\secno=0
- \putwordChapter@tie \the\chapno
- \else \ifnum\subsecno=0
- \putwordSection@tie \the\chapno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-\def\Yappendix{%
- \ifnum\secno=0
- \putwordAppendix@tie @char\the\appendixno{}%
- \else \ifnum\subsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie
- @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-%
-\def\refx#1#2{%
- {%
- \indexnofonts
- \otherbackslash
- \expandafter\global\expandafter\let\expandafter\thisrefX
- \csname XR#1\endcsname
- }%
- \ifx\thisrefX\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \thisrefX
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file. Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions). But if this is a float type, we have more work to do.
-%
-\def\xrdef#1#2{%
- \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
- %
- % Was that xref control sequence that we just defined for a float?
- \expandafter\iffloat\csname XR#1\endcsname
- % it was a float, and we have the (safe) float type in \iffloattype.
- \expandafter\let\expandafter\floatlist
- \csname floatlist\iffloattype\endcsname
- %
- % Is this the first time we've seen this float type?
- \expandafter\ifx\floatlist\relax
- \toks0 = {\do}% yes, so just \do
- \else
- % had it before, so preserve previous elements in list.
- \toks0 = \expandafter{\floatlist\do}%
- \fi
- %
- % Remember this xref in the control sequence \floatlistFLOATTYPE,
- % for later use in \listoffloats.
- \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
- \fi
-}
-
-% Read the last existing aux file, if any. No error if none exists.
-%
-\def\tryauxfile{%
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \readauxfile
- \global\havexrefstrue
- \fi
- \closein 1
-}
-
-\def\readauxfile{\begingroup
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\^=\other
- %
- % Special characters. Should be turned off anyway, but...
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`\%=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- %
- % This is to support \ in node names and titles, since the \
- % characters end up in a \csname. It's easier than
- % leaving it active and making its active definition an actual \
- % character. What I don't understand is why it works in the *value*
- % of the xrdef. Seems like it should be a catcode12 \, and that
- % should not typeset properly. But it works, so I'm moving on for
- % now. --karl, 15jan04.
- \catcode`\\=\other
- %
- % Make the characters 128-255 be printing characters.
- {%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
- }%
- }%
- %
- % @ is our escape character in .aux files, and we need braces.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\@=0
- %
- \input \jobname.aux
-\endgroup}
-
-
-\message{insertions,}
-% including footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for info output only.
-\let\footnotestyle=\comment
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \dofootnote
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\gdef\dofootnote{%
- \insert\footins\bgroup
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \hsize=\pagewidth
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- \smallfonts \rm
- %
- % Because we use hanging indentation in footnotes, a @noindent appears
- % to exdent this text, so make it be a no-op. makeinfo does not use
- % hanging indentation so @noindent can still be needed within footnote
- % text after an @example or the like (not that this is good style).
- \let\noindent = \relax
- %
- % Hang the footnote text off the number. Use \everypar in case the
- % footnote extends for more than one paragraph.
- \everypar = {\hang}%
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- \futurelet\next\fo@t
-}
-}%end \catcode `\@=11
-
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished. Otherwise, the insertion
-% would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes. --kasal, 16nov03.
-
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
-%
-\def\startsavinginserts{%
- \ifx \insert\ptexinsert
- \let\insert\saveinsert
- \else
- \let\checkinserts\relax
- \fi
-}
-
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
-%
-\def\saveinsert#1{%
- \edef\next{\noexpand\savetobox \makeSAVEname#1}%
- \afterassignment\next
- % swallow the left brace
- \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
- \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
- {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
- \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
- \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
- \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
- \next
-}
-\def\newsaveinsX #1{%
- \csname newbox\endcsname #1%
- \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
- \checksaveins #1}%
-}
-
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- % Do not bother showing banner with epsf.tex v2.7k (available in
- % doc/epsf.tex and on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-\closein 1
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://tug.org/tex/epsf.tex.}
-%
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
- \catcode`\^^M = 5 % in case we're inside an example
- \normalturnoffactive % allow _ et al. in names
- % If the image is by itself, center it.
- \ifvmode
- \imagevmodetrue
- \nobreak\bigskip
- % Usually we'll have text after the image which will insert
- % \parskip glue, so insert it here too to equalize the space
- % above and below.
- \nobreak\vskip\parskip
- \nobreak
- \line\bgroup\hss
- \fi
- %
- % Output the image.
- \ifpdf
- \dopdfimage{#1}{#2}{#3}%
- \else
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
- \fi
- %
- \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
-\endgroup}
-
-
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc. We don't actually implement floating yet, we always include the
-% float "here". But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label. Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored. It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
- \let\thiscaption=\empty
- \let\thisshortcaption=\empty
- %
- % don't lose footnotes inside @float.
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \startsavinginserts
- %
- % We can't be used inside a paragraph.
- \par
- %
- \vtop\bgroup
- \def\floattype{#1}%
- \def\floatlabel{#2}%
- \def\floatloc{#3}% we do nothing with this yet.
- %
- \ifx\floattype\empty
- \let\safefloattype=\empty
- \else
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- \fi
- %
- % If label is given but no type, we handle that as the empty type.
- \ifx\floatlabel\empty \else
- % We want each FLOATTYPE to be numbered separately (Figure 1,
- % Table 1, Figure 2, ...). (And if no label, no number.)
- %
- \expandafter\getfloatno\csname\safefloattype floatno\endcsname
- \global\advance\floatno by 1
- %
- {%
- % This magic value for \thissection is output by \setref as the
- % XREFLABEL-title value. \xrefX uses it to distinguish float
- % labels (which have a completely different output format) from
- % node and anchor labels. And \xrdef uses it to construct the
- % lists of floats.
- %
- \edef\thissection{\floatmagic=\safefloattype}%
- \setref{\floatlabel}{Yfloat}%
- }%
- \fi
- %
- % start with \parskip glue, I guess.
- \vskip\parskip
- %
- % Don't suppress indentation if a float happens to start a section.
- \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption: Foo 1.1
-% @float Foo & @caption{Cap}: Foo: Cap
-% @float Foo & no caption: Foo
-% @float ,lbl & Caption{Cap}: 1.1: Cap
-% @float ,lbl & no caption: 1.1
-% @float & @caption{Cap}: Cap
-% @float & no caption:
-%
-\def\Efloat{%
- \let\floatident = \empty
- %
- % In all cases, if we have a float type, it comes first.
- \ifx\floattype\empty \else \def\floatident{\floattype}\fi
- %
- % If we have an xref label, the number comes next.
- \ifx\floatlabel\empty \else
- \ifx\floattype\empty \else % if also had float type, need tie first.
- \appendtomacro\floatident{\tie}%
- \fi
- % the number.
- \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
- \fi
- %
- % Start the printed caption with what we've constructed in
- % \floatident, but keep it separate; we need \floatident again.
- \let\captionline = \floatident
- %
- \ifx\thiscaption\empty \else
- \ifx\floatident\empty \else
- \appendtomacro\captionline{: }% had ident, so need a colon between
- \fi
- %
- % caption text.
- \appendtomacro\captionline{\scanexp\thiscaption}%
- \fi
- %
- % If we have anything to print, print it, with space before.
- % Eventually this needs to become an \insert.
- \ifx\captionline\empty \else
- \vskip.5\parskip
- \captionline
- %
- % Space below caption.
- \vskip\parskip
- \fi
- %
- % If have an xref label, write the list of floats info. Do this
- % after the caption, to avoid chance of it being a breakpoint.
- \ifx\floatlabel\empty \else
- % Write the text that goes in the lof to the aux file as
- % \floatlabel-lof. Besides \floatident, we include the short
- % caption if specified, else the full caption if specified, else nothing.
- {%
- \atdummies \turnoffactive \otherbackslash
- % since we read the caption text in the macro world, where ^^M
- % is turned into a normal character, we have to scan it back, so
- % we don't write the literal three characters "^^M" into the aux file.
- \scanexp{%
- \xdef\noexpand\gtemp{%
- \ifx\thisshortcaption\empty
- \thiscaption
- \else
- \thisshortcaption
- \fi
- }%
- }%
- \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
- \ifx\gtemp\empty \else : \gtemp \fi}}%
- }%
- \fi
- \egroup % end of \vtop
- %
- % place the captured inserts
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
- \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use. Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
- \ifx#1\relax
- % Haven't seen this figure type before.
- \csname newcount\endcsname #1%
- %
- % Remember to reset this floatno at the next chap.
- \expandafter\gdef\expandafter\resetallfloatnos
- \expandafter{\resetallfloatnos #1=0 }%
- \fi
- \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value. We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref. That is, the magic
-% \thissection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string. If so, #2 will be the
-% (safe) float type for this float. We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
- \def\temp{#1}%
- \def\iffloattype{#2}%
- \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
- \def\floattype{#1}% floattype
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- %
- % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
- \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
- \ifhavexrefs
- % if the user said @listoffloats foo but never @float foo.
- \message{\linenumber No `\safefloattype' floats to list.}%
- \fi
- \else
- \begingroup
- \leftskip=\tocindent % indent these entries like a toc
- \let\do=\listoffloatsdo
- \csname floatlist\safefloattype\endcsname
- \endgroup
- \fi
-}
-
-% This is called on each entry in a list of floats. We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file. We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
- % Can't fully expand XR#1-lof because it can contain anything. Just
- % pass the control sequence. On the other hand, XR#1-pg is just the
- % page number, and we want to fully expand that so we can get a link
- % in pdf output.
- \toksA = \expandafter{\csname XR#1-lof\endcsname}%
- %
- % use the same \entry macro we use to generate the TOC and index.
- \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
- \writeentry
-}}
-
-\message{localization,}
-% and i18n.
-
-% @documentlanguage is usually given very early, just after
-% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
-%
-\parseargdef\documentlanguage{%
- \tex % read txi-??.tex file in plain TeX.
- % Read the file if it exists.
- \openin 1 txi-#1.tex
- \ifeof 1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
- \else
- \input txi-#1.tex
- \fi
- \closein 1
- \endgroup
-}
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
-%
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
-
-% Following George Bush, just get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = .15\hsize
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
-% physical page width.
-%
-% We also call \setleading{\textleading}, so the caller should define
-% \textleading. The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6#7#8{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \ifpdf
- \pdfpageheight #7\relax
- \pdfpagewidth #8\relax
- \fi
- %
- \setleading{\textleading}
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{46\baselineskip}{6in}%
- {\voffset}{.25in}%
- {\bindingoffset}{36pt}%
- {11in}{8.5in}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.5in}{5in}%
- {\voffset}{.25in}%
- {\bindingoffset}{16pt}%
- {9.25in}{7in}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .5cm
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % Double-side printing via postscript on Laserjet 4050
- % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
- % To change the settings for a different printer or situation, adjust
- % \normaloffset until the front-side and back-side texts align. Then
- % do the same for \bindingoffset. You can set these for testing in
- % your texinfo source file like this:
- % @tex
- % \global\normaloffset = -6mm
- % \global\bindingoffset = 10mm
- % @end tex
- \internalpagesizes{51\baselineskip}{160mm}
- {\voffset}{\hoffset}%
- {\bindingoffset}{44pt}%
- {297mm}{210mm}%
- %
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo@urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
- \parskip = 2pt plus 1pt minus 0.1pt
- \textleading = 12.5pt
- %
- \internalpagesizes{160mm}{120mm}%
- {\voffset}{\hoffset}%
- {\bindingoffset}{8pt}%
- {210mm}{148mm}%
- %
- \lispnarrowing = 0.2in
- \tolerance = 800
- \hfuzz = 1.2pt
- \contentsrightmargin = 0pt
- \defbodyindent = 2mm
- \tableindent = 12mm
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{237mm}{150mm}%
- {\voffset}{4.6mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- %
- % Must explicitly reset to 0 because we call \afourpaper.
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in landscape format.
-\def\afourwide{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{241mm}{165mm}%
- {\voffset}{-2.95mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{\textleading}%
- %
- \dimen0 = #1
- \advance\dimen0 by \voffset
- %
- \dimen2 = \hsize
- \advance\dimen2 by \normaloffset
- %
- \internalpagesizes{#1}{\hsize}%
- {\voffset}{\normaloffset}%
- {\bindingoffset}{44pt}%
- {\dimen0}{\dimen2}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
-
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-\catcode`\@=0
-
-% \backslashcurfont outputs one backslash character in current font,
-% as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
-
-% \rawbackslash defines an active \ to do \backslashcurfont.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef@realbackslash{\}}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
-
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
- @let"=@normaldoublequote
- @let\=@realbackslash
- @let~=@normaltilde
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let<=@normalless
- @let>=@normalgreater
- @let+=@normalplus
- @let$=@normaldollar %$ font-lock fix
- @unsepspaces
-}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'. (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active
- @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
-
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
-@c End:
-
-@c vim:sw=2:
-
-@ignore
- arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
-@end ignore
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(grub_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = grub$(EXEEXT)
-subdir = grub
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)"
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(sbin_PROGRAMS)
-am_grub_OBJECTS = main.$(OBJEXT) asmstub.$(OBJEXT)
-grub_OBJECTS = $(am_grub_OBJECTS)
-am__DEPENDENCIES_1 =
-grub_DEPENDENCIES = ../stage2/libgrub.a ../lib/libcommon.a \
- $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(grub_SOURCES)
-DIST_SOURCES = $(grub_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-@SERIAL_SPEED_SIMULATION_FALSE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1
-@SERIAL_SPEED_SIMULATION_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1 -DSIMULATE_SLOWNESS_OF_SERIAL=1
-AM_CPPFLAGS = -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
- -DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \
- -DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
- -DUSE_MD5_PASSWORDS=1 -DSUPPORT_HERCULES=1 \
- $(SERIAL_FLAGS) -I$(top_srcdir)/stage2 \
- -I$(top_srcdir)/stage1 -I$(top_srcdir)/lib
-
-AM_CFLAGS = $(GRUB_CFLAGS)
-grub_SOURCES = main.c asmstub.c
-grub_LDADD = ../stage2/libgrub.a ../lib/libcommon.a $(GRUB_LIBS)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu grub/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu grub/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-clean-sbinPROGRAMS:
- -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-grub$(EXEEXT): $(grub_OBJECTS) $(grub_DEPENDENCIES)
- @rm -f grub$(EXEEXT)
- $(LINK) $(grub_LDFLAGS) $(grub_OBJECTS) $(grub_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asmstub.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(sbindir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-sbinPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-sbinPROGRAMS
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-sbinPROGRAMS ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-sbinPROGRAMS install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am uninstall-sbinPROGRAMS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-12-17.09
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit 0;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit 0;;
-
- *) # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- test -n "$dir_arg$dstarg" && break
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
- break;;
- esac
-done
-
-if test -z "$1"; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- src=
-
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
- else
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dst=$dst/`basename "$src"`
- fi
- fi
-
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
-
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
-
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- shift
- IFS=$oIFS
-
- pathcomp=
-
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
- shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
- fi
- pathcomp=$pathcomp/
- done
- fi
-
- if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
- else
- dstfile=`basename "$dst"`
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
-
- # Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
- || {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
- }
- }
- fi || { (exit 1); exit 1; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit 0
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(libcommon_a_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = lib
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-AR = ar
-ARFLAGS = cru
-libcommon_a_AR = $(AR) $(ARFLAGS)
-libcommon_a_LIBADD =
-am_libcommon_a_OBJECTS = getopt.$(OBJEXT) getopt1.$(OBJEXT) \
- device.$(OBJEXT)
-libcommon_a_OBJECTS = $(am_libcommon_a_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libcommon_a_SOURCES)
-DIST_SOURCES = $(libcommon_a_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-noinst_LIBRARIES = libcommon.a
-AM_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/stage2 \
- -I$(top_srcdir)/stage1
-
-libcommon_a_SOURCES = getopt.c getopt1.c getopt.h device.c device.h
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libcommon.a: $(libcommon_a_OBJECTS) $(libcommon_a_DEPENDENCIES)
- -rm -f libcommon.a
- $(libcommon_a_AR) libcommon.a $(libcommon_a_OBJECTS) $(libcommon_a_LIBADD)
- $(RANLIB) libcommon.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstLIBRARIES ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2004-09-07.08
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
- exit 0
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit 0
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2004-02-15.20
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
- echo "$usage"
- exit 0
- ;;
- -m) # -m PERM arg
- shift
- test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
- dirmode=$1
- shift
- ;;
- --version)
- echo "$0 $scriptversion"
- exit 0
- ;;
- --) # stop option processing
- shift
- break
- ;;
- -*) # unknown option
- echo "$usage" 1>&2
- exit 1
- ;;
- *) # first non-opt arg
- break
- ;;
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
-
-case $# in
- 0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error. This is a problem when calling mkinstalldirs
-# from a parallel make. We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
- '')
- if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- test -d ./-p && rmdir ./-p
- test -d ./--version && rmdir ./--version
- fi
- ;;
- *)
- if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
- test ! -d ./--version; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- else
- # Clean up after NextStep and OpenStep mkdir.
- for d in ./-m ./-p ./--version "./$dirmode";
- do
- test -d $d && rmdir $d
- done
- fi
- ;;
-esac
-
-for file
-do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = netboot
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-AR = ar
-ARFLAGS = cru
-libdrivers_a_AR = $(AR) $(ARFLAGS)
-am_libdrivers_a_OBJECTS = libdrivers_a-config.$(OBJEXT) \
- libdrivers_a-fsys_tftp.$(OBJEXT) libdrivers_a-main.$(OBJEXT) \
- libdrivers_a-misc.$(OBJEXT) libdrivers_a-pci.$(OBJEXT) \
- libdrivers_a-timer.$(OBJEXT)
-libdrivers_a_OBJECTS = $(am_libdrivers_a_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES)
-DIST_SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-# For <shared.h> and <stage1.h>.
-INCLUDES = -I$(top_srcdir)/stage2 -I$(top_srcdir)/stage1
-@NETBOOT_SUPPORT_FALSE@LIBDRIVERS =
-
-# Don't build the netboot support by default.
-@NETBOOT_SUPPORT_TRUE@LIBDRIVERS = libdrivers.a
-noinst_LIBRARIES = $(LIBDRIVERS)
-libdrivers_a_SOURCES = cards.h config.c etherboot.h \
- fsys_tftp.c linux-asm-io.h linux-asm-string.h \
- main.c misc.c nic.h osdep.h pci.c pci.h timer.c timer.h
-
-EXTRA_libdrivers_a_SOURCES = 3c509.c 3c509.h 3c595.c 3c595.h 3c90x.c \
- cs89x0.c cs89x0.h davicom.c depca.c eepro.c eepro100.c \
- epic100.c epic100.h fa311.c i82586.c lance.c natsemi.c \
- ni5010.c ns8390.c ns8390.h otulip.c otulip.h rtl8139.c \
- sis900.c sis900.h sk_g16.c sk_g16.h smc9000.c smc9000.h \
- tiara.c tlan.c tulip.c via-rhine.c w89c840.c
-
-libdrivers_a_CFLAGS = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- -DFSYS_TFTP=1 $(NET_CFLAGS) $(NET_EXTRAFLAGS)
-
-# Filled by configure.
-libdrivers_a_LIBADD = @NETBOOT_DRIVERS@
-libdrivers_a_DEPENDENCIES = $(libdrivers_a_LIBADD)
-EXTRA_DIST = README.netboot 3c90x.txt cs89x0.txt sis900.txt tulip.txt
-
-# These below are several special rules for the device drivers.
-# We cannot use a simple rule for them...
-
-# What objects are derived from a driver?
-3c509_drivers = 3c509.o 3c529.o
-3c595_drivers = 3c595.o
-3c90x_drivers = 3c90x.o
-cs89x0_drivers = cs89x0.o
-davicom_drivers = davicom.o
-depca_drivers = depca.o
-eepro_drivers = eepro.o
-eepro100_drivers = eepro100.o
-epic100_drivers = epic100.o
-#fa311_drivers = fa311.o
-i82586_drivers = 3c507.o exos205.o ni5210.o
-lance_drivers = lance.o ne2100.o ni6510.o
-natsemi_drivers = natsemi.o
-ni5010_drivers = ni5010.o
-ns8390_drivers = 3c503.o ne.o ns8390.o wd.o
-otulip_drivers = otulip.o
-rtl8139_drivers = rtl8139.o
-sis900_drivers = sis900.o
-sk_g16_drivers = sk_g16.o
-smc9000_drivers = smc9000.o
-tiara_drivers = tiara.o
-#tlan_drivers = tlan.o
-tulip_drivers = tulip.o
-via_rhine_drivers = via_rhine.o
-w89c840_drivers = w89c840.o
-
-# Per-object flags.
-3c509_o_CFLAGS = -DINCLUDE_3C509=1
-3c529_o_CFLAGS = -DINCLUDE_3C529=1
-3c595_o_CFLAGS = -DINCLUDE_3C595=1
-3c90x_o_CFLAGS = -DINCLUDE_3C90X=1
-cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1
-davicom_o_CFLAGS = -DINCLUDE_DAVICOM=1
-depca_o_CFLAGS = -DINCLUDE_DEPCA=1
-eepro_o_CFLAGS = -DINCLUDE_EEPRO=1
-eepro100_o_CFLAGS = -DINCLUDE_EEPRO100=1
-epic100_o_CFLAGS = -DINCLUDE_EPIC100=1
-#fa311_o_CFLAGS = -DINCLUDE_FA311=1
-3c507_o_CFLAGS = -DINCLUDE_3C507=1
-exos205_o_CFLAGS = -DINCLUDE_EXOS205=1
-ni5210_o_CFLAGS = -DINCLUDE_NI5210=1
-lance_o_CFLAGS = -DINCLUDE_LANCE=1
-ne2100_o_CFLAGS = -DINCLUDE_NE2100=1
-ni6510_o_CFLAGS = -DINCLUDE_NI6510=1
-natsemi_o_CFLAGS = -DINCLUDE_NATSEMI=1
-ni5010_o_CFLAGS = -DINCLUDE_NI5010=1
-3c503_o_CFLAGS = -DINCLUDE_3C503=1
-ne_o_CFLAGS = -DINCLUDE_NE=1
-ns8390_o_CFLAGS = -DINCLUDE_NS8390=1
-wd_o_CFLAGS = -DINCLUDE_WD=1
-otulip_o_CFLAGS = -DINCLUDE_OTULIP=1
-rtl8139_o_CFLAGS = -DINCLUDE_RTL8139=1
-sis900_o_CFLAGS = -DINCLUDE_SIS900=1
-sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1
-smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1
-tiara_o_CFLAGS = -DINCLUDE_TIARA=1
-#tlan_o_CFLAGS = -DINCLUDE_TLAN=1
-tulip_o_CFLAGS = -DINCLUDE_TULIP=1
-via_rhine_o_CFLAGS = -DINCLUDE_VIA_RHINE=1
-w89c840_o_CFLAGS = -DINCLUDE_W89C840=1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu netboot/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu netboot/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libdrivers.a: $(libdrivers_a_OBJECTS) $(libdrivers_a_DEPENDENCIES)
- -rm -f libdrivers.a
- $(libdrivers_a_AR) libdrivers.a $(libdrivers_a_OBJECTS) $(libdrivers_a_LIBADD)
- $(RANLIB) libdrivers.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c509.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c595.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c90x.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-config.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-cs89x0.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-davicom.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-depca.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro100.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-epic100.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fa311.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fsys_tftp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-i82586.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-lance.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-misc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-natsemi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ni5010.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ns8390.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-otulip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pci.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-rtl8139.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sis900.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sk_g16.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-smc9000.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tiara.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-timer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tlan.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tulip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-via-rhine.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-w89c840.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-libdrivers_a-config.o: config.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='config.c' object='libdrivers_a-config.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c
-
-libdrivers_a-config.obj: config.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='config.c' object='libdrivers_a-config.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi`
-
-libdrivers_a-fsys_tftp.o: fsys_tftp.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c
-
-libdrivers_a-fsys_tftp.obj: fsys_tftp.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi`
-
-libdrivers_a-main.o: main.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='libdrivers_a-main.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
-
-libdrivers_a-main.obj: main.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='libdrivers_a-main.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
-
-libdrivers_a-misc.o: misc.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='misc.c' object='libdrivers_a-misc.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c
-
-libdrivers_a-misc.obj: misc.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='misc.c' object='libdrivers_a-misc.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi`
-
-libdrivers_a-pci.o: pci.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pci.c' object='libdrivers_a-pci.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c
-
-libdrivers_a-pci.obj: pci.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pci.c' object='libdrivers_a-pci.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi`
-
-libdrivers_a-timer.o: timer.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='timer.c' object='libdrivers_a-timer.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c
-
-libdrivers_a-timer.obj: timer.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='timer.c' object='libdrivers_a-timer.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi`
-
-libdrivers_a-3c509.o: 3c509.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c509.c' object='libdrivers_a-3c509.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c
-
-libdrivers_a-3c509.obj: 3c509.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c509.c' object='libdrivers_a-3c509.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi`
-
-libdrivers_a-3c595.o: 3c595.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c595.c' object='libdrivers_a-3c595.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c
-
-libdrivers_a-3c595.obj: 3c595.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c595.c' object='libdrivers_a-3c595.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi`
-
-libdrivers_a-3c90x.o: 3c90x.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c90x.c' object='libdrivers_a-3c90x.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c
-
-libdrivers_a-3c90x.obj: 3c90x.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c90x.c' object='libdrivers_a-3c90x.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi`
-
-libdrivers_a-cs89x0.o: cs89x0.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cs89x0.c' object='libdrivers_a-cs89x0.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c
-
-libdrivers_a-cs89x0.obj: cs89x0.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cs89x0.c' object='libdrivers_a-cs89x0.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi`
-
-libdrivers_a-davicom.o: davicom.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='davicom.c' object='libdrivers_a-davicom.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c
-
-libdrivers_a-davicom.obj: davicom.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='davicom.c' object='libdrivers_a-davicom.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi`
-
-libdrivers_a-depca.o: depca.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='depca.c' object='libdrivers_a-depca.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c
-
-libdrivers_a-depca.obj: depca.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='depca.c' object='libdrivers_a-depca.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi`
-
-libdrivers_a-eepro.o: eepro.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro.c' object='libdrivers_a-eepro.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c
-
-libdrivers_a-eepro.obj: eepro.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro.c' object='libdrivers_a-eepro.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi`
-
-libdrivers_a-eepro100.o: eepro100.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro100.c' object='libdrivers_a-eepro100.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c
-
-libdrivers_a-eepro100.obj: eepro100.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro100.c' object='libdrivers_a-eepro100.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi`
-
-libdrivers_a-epic100.o: epic100.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='epic100.c' object='libdrivers_a-epic100.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c
-
-libdrivers_a-epic100.obj: epic100.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='epic100.c' object='libdrivers_a-epic100.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi`
-
-libdrivers_a-fa311.o: fa311.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fa311.c' object='libdrivers_a-fa311.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c
-
-libdrivers_a-fa311.obj: fa311.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fa311.c' object='libdrivers_a-fa311.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi`
-
-libdrivers_a-i82586.o: i82586.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='i82586.c' object='libdrivers_a-i82586.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c
-
-libdrivers_a-i82586.obj: i82586.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='i82586.c' object='libdrivers_a-i82586.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi`
-
-libdrivers_a-lance.o: lance.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lance.c' object='libdrivers_a-lance.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c
-
-libdrivers_a-lance.obj: lance.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lance.c' object='libdrivers_a-lance.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi`
-
-libdrivers_a-natsemi.o: natsemi.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='natsemi.c' object='libdrivers_a-natsemi.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c
-
-libdrivers_a-natsemi.obj: natsemi.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='natsemi.c' object='libdrivers_a-natsemi.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi`
-
-libdrivers_a-ni5010.o: ni5010.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ni5010.c' object='libdrivers_a-ni5010.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c
-
-libdrivers_a-ni5010.obj: ni5010.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ni5010.c' object='libdrivers_a-ni5010.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi`
-
-libdrivers_a-ns8390.o: ns8390.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ns8390.c' object='libdrivers_a-ns8390.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c
-
-libdrivers_a-ns8390.obj: ns8390.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ns8390.c' object='libdrivers_a-ns8390.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi`
-
-libdrivers_a-otulip.o: otulip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='otulip.c' object='libdrivers_a-otulip.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c
-
-libdrivers_a-otulip.obj: otulip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='otulip.c' object='libdrivers_a-otulip.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi`
-
-libdrivers_a-rtl8139.o: rtl8139.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rtl8139.c' object='libdrivers_a-rtl8139.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c
-
-libdrivers_a-rtl8139.obj: rtl8139.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rtl8139.c' object='libdrivers_a-rtl8139.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi`
-
-libdrivers_a-sis900.o: sis900.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sis900.c' object='libdrivers_a-sis900.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c
-
-libdrivers_a-sis900.obj: sis900.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sis900.c' object='libdrivers_a-sis900.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi`
-
-libdrivers_a-sk_g16.o: sk_g16.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sk_g16.c' object='libdrivers_a-sk_g16.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c
-
-libdrivers_a-sk_g16.obj: sk_g16.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sk_g16.c' object='libdrivers_a-sk_g16.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi`
-
-libdrivers_a-smc9000.o: smc9000.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smc9000.c' object='libdrivers_a-smc9000.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c
-
-libdrivers_a-smc9000.obj: smc9000.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smc9000.c' object='libdrivers_a-smc9000.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi`
-
-libdrivers_a-tiara.o: tiara.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tiara.c' object='libdrivers_a-tiara.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c
-
-libdrivers_a-tiara.obj: tiara.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tiara.c' object='libdrivers_a-tiara.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi`
-
-libdrivers_a-tlan.o: tlan.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tlan.c' object='libdrivers_a-tlan.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c
-
-libdrivers_a-tlan.obj: tlan.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tlan.c' object='libdrivers_a-tlan.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi`
-
-libdrivers_a-tulip.o: tulip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tulip.c' object='libdrivers_a-tulip.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c
-
-libdrivers_a-tulip.obj: tulip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tulip.c' object='libdrivers_a-tulip.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi`
-
-libdrivers_a-via-rhine.o: via-rhine.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='via-rhine.c' object='libdrivers_a-via-rhine.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c
-
-libdrivers_a-via-rhine.obj: via-rhine.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='via-rhine.c' object='libdrivers_a-via-rhine.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi`
-
-libdrivers_a-w89c840.o: w89c840.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='w89c840.c' object='libdrivers_a-w89c840.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c
-
-libdrivers_a-w89c840.obj: w89c840.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='w89c840.c' object='libdrivers_a-w89c840.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstLIBRARIES ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-info-am
-
-
-# Is it really necessary to specify dependecies explicitly?
-$(3c509_drivers): 3c509.c 3c509.h
-$(3c509_drivers): %.o: 3c509.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(3c595_drivers): 3c595.c 3c595.h
-$(3c595_drivers): %.o: 3c595.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(3c90x_drivers): 3c90x.c
-$(3c90x_drivers): %.o: 3c90x.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(cs89x0_drivers): cs89x0.c cs89x0.h
-$(cs89x0_drivers): %.o: cs89x0.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(davicom_drivers): davicom.c
-$(davicom_drivers): %.o: davicom.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(depca_drivers): depca.c
-$(depca_drivers): %.o: depca.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(eepro_drivers): eepro.c
-$(eepro_drivers): %.o: eepro.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(eepro100_drivers): eepro100.c
-$(eepro100_drivers): %.o: eepro100.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(epic100_drivers): epic100.c epic100.h
-$(epic100_drivers): %.o: epic100.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-#$(fa311_drivers): fa311.c
-#$(fa311_drivers): %.o: fa311.c
-# $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
-# $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(i82586_drivers): i82586.c
-$(i82586_drivers): %.o: i82586.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(lance_drivers): lance.c
-$(lance_drivers): %.o: lance.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(natsemi_drivers): natsemi.c
-$(natsemi_drivers): %.o: natsemi.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(ni5010_drivers): ni5010.c
-$(ni5010_drivers): %.o: ni5010.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(ns8390_drivers): ns8390.c ns8390.h
-$(ns8390_drivers): %.o: ns8390.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(otulip_drivers): otulip.c otulip.h
-$(otulip_drivers): %.o: otulip.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(rtl8139_drivers): rtl8139.c
-$(rtl8139_drivers): %.o: rtl8139.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(sis900_drivers): sis900.c
-$(sis900_drivers): %.o: sis900.c sis900.h
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(sk_g16_drivers): sk_g16.c sk_g16.h
-$(sk_g16_drivers): %.o: sk_g16.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(smc9000_drivers): smc9000.c smc9000.h
-$(smc9000_drivers): %.o: smc9000.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(tiara_drivers): tiara.c
-$(tiara_drivers): %.o: tiara.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-#$(tlan_drivers): tlan.c
-#$(tlan_drivers): %.o: tlan.c
-# $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
-# $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(tulip_drivers): tulip.c
-$(tulip_drivers): %.o: tulip.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(via_rhine_drivers): via-rhine.c
-$(via_rhine_drivers): %.o: via-rhine.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-
-$(w89c840_drivers): w89c840.c
-$(w89c840_drivers): %.o: w89c840.c
- $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-SOURCES = $(stage1_exec_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-noinst_PROGRAMS = stage1.exec$(EXEEXT)
-subdir = stage1
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(noinst_PROGRAMS)
-am_stage1_exec_OBJECTS = stage1.$(OBJEXT)
-stage1_exec_OBJECTS = $(am_stage1_exec_OBJECTS)
-stage1_exec_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(stage1_exec_SOURCES)
-DIST_SOURCES = $(stage1_exec_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(pkglibdir)"
-nodist_pkglibDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(nodist_pkglib_DATA)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibdir = $(libdir)/$(PACKAGE)/$(host_cpu)-$(host_vendor)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-nodist_pkglib_DATA = stage1
-CLEANFILES = $(nodist_pkglib_DATA)
-
-# We can't use builtins or standard includes.
-AM_CCASFLAGS = $(STAGE1_CFLAGS) -fno-builtin -nostdinc
-stage1_exec_LDFLAGS = -nostdlib -Wl,-N,-Ttext,7C00
-stage1_exec_SOURCES = stage1.S stage1.h
-SUFFIXES = .exec
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .exec .S .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stage1/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu stage1/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstPROGRAMS:
- -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-stage1.exec$(EXEEXT): $(stage1_exec_OBJECTS) $(stage1_exec_DEPENDENCIES)
- @rm -f stage1.exec$(EXEEXT)
- $(LINK) $(stage1_exec_LDFLAGS) $(stage1_exec_OBJECTS) $(stage1_exec_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-.S.o:
- $(CCASCOMPILE) -c $<
-
-.S.obj:
- $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
-install-nodist_pkglibDATA: $(nodist_pkglib_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
- @list='$(nodist_pkglib_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(nodist_pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
- $(nodist_pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
- done
-
-uninstall-nodist_pkglibDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(nodist_pkglib_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(pkglibdir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-nodist_pkglibDATA
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-nodist_pkglibDATA
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstPROGRAMS ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-nodist_pkglibDATA \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-info-am \
- uninstall-nodist_pkglibDATA
-
-.exec:
- $(OBJCOPY) -O binary $< $@
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-
-
-
-SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) $(xfs_stage1_5_exec_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-EXTRA_PROGRAMS = nbloader.exec$(EXEEXT) pxeloader.exec$(EXEEXT) \
- diskless.exec$(EXEEXT)
-@DISKLESS_SUPPORT_FALSE@noinst_PROGRAMS = pre_stage2.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ start.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ start_eltorito.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ e2fs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ fat_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ ffs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ iso9660_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ jfs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ minix_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ reiserfs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ ufs2_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ vstafs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_FALSE@ xfs_stage1_5.exec$(EXEEXT)
-@DISKLESS_SUPPORT_TRUE@noinst_PROGRAMS = pre_stage2.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ start.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ start_eltorito.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ e2fs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ fat_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ ffs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ iso9660_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ jfs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ minix_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ reiserfs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ ufs2_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ vstafs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ xfs_stage1_5.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ nbloader.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ pxeloader.exec$(EXEEXT) \
-@DISKLESS_SUPPORT_TRUE@ diskless.exec$(EXEEXT)
-subdir = stage2
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-AR = ar
-ARFLAGS = cru
-libgrub_a_AR = $(AR) $(ARFLAGS)
-libgrub_a_LIBADD =
-am_libgrub_a_OBJECTS = libgrub_a-boot.$(OBJEXT) \
- libgrub_a-builtins.$(OBJEXT) libgrub_a-char_io.$(OBJEXT) \
- libgrub_a-cmdline.$(OBJEXT) libgrub_a-common.$(OBJEXT) \
- libgrub_a-disk_io.$(OBJEXT) libgrub_a-fsys_ext2fs.$(OBJEXT) \
- libgrub_a-fsys_fat.$(OBJEXT) libgrub_a-fsys_ffs.$(OBJEXT) \
- libgrub_a-fsys_iso9660.$(OBJEXT) libgrub_a-fsys_jfs.$(OBJEXT) \
- libgrub_a-fsys_minix.$(OBJEXT) \
- libgrub_a-fsys_reiserfs.$(OBJEXT) \
- libgrub_a-fsys_ufs2.$(OBJEXT) libgrub_a-fsys_vstafs.$(OBJEXT) \
- libgrub_a-fsys_xfs.$(OBJEXT) libgrub_a-gunzip.$(OBJEXT) \
- libgrub_a-md5.$(OBJEXT) libgrub_a-serial.$(OBJEXT) \
- libgrub_a-stage2.$(OBJEXT) libgrub_a-terminfo.$(OBJEXT) \
- libgrub_a-tparm.$(OBJEXT)
-libgrub_a_OBJECTS = $(am_libgrub_a_OBJECTS)
-PROGRAMS = $(noinst_PROGRAMS)
-am__objects_1 = diskless_exec-asm.$(OBJEXT) \
- diskless_exec-bios.$(OBJEXT) diskless_exec-boot.$(OBJEXT) \
- diskless_exec-builtins.$(OBJEXT) \
- diskless_exec-char_io.$(OBJEXT) \
- diskless_exec-cmdline.$(OBJEXT) diskless_exec-common.$(OBJEXT) \
- diskless_exec-console.$(OBJEXT) \
- diskless_exec-disk_io.$(OBJEXT) \
- diskless_exec-fsys_ext2fs.$(OBJEXT) \
- diskless_exec-fsys_fat.$(OBJEXT) \
- diskless_exec-fsys_ffs.$(OBJEXT) \
- diskless_exec-fsys_iso9660.$(OBJEXT) \
- diskless_exec-fsys_jfs.$(OBJEXT) \
- diskless_exec-fsys_minix.$(OBJEXT) \
- diskless_exec-fsys_reiserfs.$(OBJEXT) \
- diskless_exec-fsys_ufs2.$(OBJEXT) \
- diskless_exec-fsys_vstafs.$(OBJEXT) \
- diskless_exec-fsys_xfs.$(OBJEXT) \
- diskless_exec-gunzip.$(OBJEXT) \
- diskless_exec-hercules.$(OBJEXT) diskless_exec-md5.$(OBJEXT) \
- diskless_exec-serial.$(OBJEXT) \
- diskless_exec-smp-imps.$(OBJEXT) \
- diskless_exec-stage2.$(OBJEXT) \
- diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT)
-am_diskless_exec_OBJECTS = $(am__objects_1)
-diskless_exec_OBJECTS = $(am_diskless_exec_OBJECTS)
-diskless_exec_DEPENDENCIES = ../netboot/libdrivers.a
-am_e2fs_stage1_5_exec_OBJECTS = e2fs_stage1_5_exec-start.$(OBJEXT) \
- e2fs_stage1_5_exec-asm.$(OBJEXT) \
- e2fs_stage1_5_exec-common.$(OBJEXT) \
- e2fs_stage1_5_exec-char_io.$(OBJEXT) \
- e2fs_stage1_5_exec-disk_io.$(OBJEXT) \
- e2fs_stage1_5_exec-stage1_5.$(OBJEXT) \
- e2fs_stage1_5_exec-fsys_ext2fs.$(OBJEXT) \
- e2fs_stage1_5_exec-bios.$(OBJEXT)
-e2fs_stage1_5_exec_OBJECTS = $(am_e2fs_stage1_5_exec_OBJECTS)
-e2fs_stage1_5_exec_LDADD = $(LDADD)
-am_fat_stage1_5_exec_OBJECTS = fat_stage1_5_exec-start.$(OBJEXT) \
- fat_stage1_5_exec-asm.$(OBJEXT) \
- fat_stage1_5_exec-common.$(OBJEXT) \
- fat_stage1_5_exec-char_io.$(OBJEXT) \
- fat_stage1_5_exec-disk_io.$(OBJEXT) \
- fat_stage1_5_exec-stage1_5.$(OBJEXT) \
- fat_stage1_5_exec-fsys_fat.$(OBJEXT) \
- fat_stage1_5_exec-bios.$(OBJEXT)
-fat_stage1_5_exec_OBJECTS = $(am_fat_stage1_5_exec_OBJECTS)
-fat_stage1_5_exec_LDADD = $(LDADD)
-am_ffs_stage1_5_exec_OBJECTS = ffs_stage1_5_exec-start.$(OBJEXT) \
- ffs_stage1_5_exec-asm.$(OBJEXT) \
- ffs_stage1_5_exec-common.$(OBJEXT) \
- ffs_stage1_5_exec-char_io.$(OBJEXT) \
- ffs_stage1_5_exec-disk_io.$(OBJEXT) \
- ffs_stage1_5_exec-stage1_5.$(OBJEXT) \
- ffs_stage1_5_exec-fsys_ffs.$(OBJEXT) \
- ffs_stage1_5_exec-bios.$(OBJEXT)
-ffs_stage1_5_exec_OBJECTS = $(am_ffs_stage1_5_exec_OBJECTS)
-ffs_stage1_5_exec_LDADD = $(LDADD)
-am_iso9660_stage1_5_exec_OBJECTS = \
- iso9660_stage1_5_exec-start_eltorito.$(OBJEXT) \
- iso9660_stage1_5_exec-asm.$(OBJEXT) \
- iso9660_stage1_5_exec-common.$(OBJEXT) \
- iso9660_stage1_5_exec-char_io.$(OBJEXT) \
- iso9660_stage1_5_exec-disk_io.$(OBJEXT) \
- iso9660_stage1_5_exec-stage1_5.$(OBJEXT) \
- iso9660_stage1_5_exec-fsys_iso9660.$(OBJEXT) \
- iso9660_stage1_5_exec-bios.$(OBJEXT)
-iso9660_stage1_5_exec_OBJECTS = $(am_iso9660_stage1_5_exec_OBJECTS)
-iso9660_stage1_5_exec_LDADD = $(LDADD)
-am_jfs_stage1_5_exec_OBJECTS = jfs_stage1_5_exec-start.$(OBJEXT) \
- jfs_stage1_5_exec-asm.$(OBJEXT) \
- jfs_stage1_5_exec-common.$(OBJEXT) \
- jfs_stage1_5_exec-char_io.$(OBJEXT) \
- jfs_stage1_5_exec-disk_io.$(OBJEXT) \
- jfs_stage1_5_exec-stage1_5.$(OBJEXT) \
- jfs_stage1_5_exec-fsys_jfs.$(OBJEXT) \
- jfs_stage1_5_exec-bios.$(OBJEXT)
-jfs_stage1_5_exec_OBJECTS = $(am_jfs_stage1_5_exec_OBJECTS)
-jfs_stage1_5_exec_LDADD = $(LDADD)
-am_minix_stage1_5_exec_OBJECTS = minix_stage1_5_exec-start.$(OBJEXT) \
- minix_stage1_5_exec-asm.$(OBJEXT) \
- minix_stage1_5_exec-common.$(OBJEXT) \
- minix_stage1_5_exec-char_io.$(OBJEXT) \
- minix_stage1_5_exec-disk_io.$(OBJEXT) \
- minix_stage1_5_exec-stage1_5.$(OBJEXT) \
- minix_stage1_5_exec-fsys_minix.$(OBJEXT) \
- minix_stage1_5_exec-bios.$(OBJEXT)
-minix_stage1_5_exec_OBJECTS = $(am_minix_stage1_5_exec_OBJECTS)
-minix_stage1_5_exec_LDADD = $(LDADD)
-am_nbloader_exec_OBJECTS = nbloader_exec-nbloader.$(OBJEXT)
-nbloader_exec_OBJECTS = $(am_nbloader_exec_OBJECTS)
-nbloader_exec_LDADD = $(LDADD)
-am_pre_stage2_exec_OBJECTS = pre_stage2_exec-asm.$(OBJEXT) \
- pre_stage2_exec-bios.$(OBJEXT) pre_stage2_exec-boot.$(OBJEXT) \
- pre_stage2_exec-builtins.$(OBJEXT) \
- pre_stage2_exec-char_io.$(OBJEXT) \
- pre_stage2_exec-cmdline.$(OBJEXT) \
- pre_stage2_exec-common.$(OBJEXT) \
- pre_stage2_exec-console.$(OBJEXT) \
- pre_stage2_exec-disk_io.$(OBJEXT) \
- pre_stage2_exec-fsys_ext2fs.$(OBJEXT) \
- pre_stage2_exec-fsys_fat.$(OBJEXT) \
- pre_stage2_exec-fsys_ffs.$(OBJEXT) \
- pre_stage2_exec-fsys_iso9660.$(OBJEXT) \
- pre_stage2_exec-fsys_jfs.$(OBJEXT) \
- pre_stage2_exec-fsys_minix.$(OBJEXT) \
- pre_stage2_exec-fsys_reiserfs.$(OBJEXT) \
- pre_stage2_exec-fsys_ufs2.$(OBJEXT) \
- pre_stage2_exec-fsys_vstafs.$(OBJEXT) \
- pre_stage2_exec-fsys_xfs.$(OBJEXT) \
- pre_stage2_exec-gunzip.$(OBJEXT) \
- pre_stage2_exec-hercules.$(OBJEXT) \
- pre_stage2_exec-md5.$(OBJEXT) pre_stage2_exec-serial.$(OBJEXT) \
- pre_stage2_exec-smp-imps.$(OBJEXT) \
- pre_stage2_exec-stage2.$(OBJEXT) \
- pre_stage2_exec-terminfo.$(OBJEXT) \
- pre_stage2_exec-tparm.$(OBJEXT)
-pre_stage2_exec_OBJECTS = $(am_pre_stage2_exec_OBJECTS)
-@NETBOOT_SUPPORT_TRUE@pre_stage2_exec_DEPENDENCIES = \
-@NETBOOT_SUPPORT_TRUE@ ../netboot/libdrivers.a
-am_pxeloader_exec_OBJECTS = pxeloader_exec-pxeloader.$(OBJEXT)
-pxeloader_exec_OBJECTS = $(am_pxeloader_exec_OBJECTS)
-pxeloader_exec_LDADD = $(LDADD)
-am_reiserfs_stage1_5_exec_OBJECTS = \
- reiserfs_stage1_5_exec-start.$(OBJEXT) \
- reiserfs_stage1_5_exec-asm.$(OBJEXT) \
- reiserfs_stage1_5_exec-common.$(OBJEXT) \
- reiserfs_stage1_5_exec-char_io.$(OBJEXT) \
- reiserfs_stage1_5_exec-disk_io.$(OBJEXT) \
- reiserfs_stage1_5_exec-stage1_5.$(OBJEXT) \
- reiserfs_stage1_5_exec-fsys_reiserfs.$(OBJEXT) \
- reiserfs_stage1_5_exec-bios.$(OBJEXT)
-reiserfs_stage1_5_exec_OBJECTS = $(am_reiserfs_stage1_5_exec_OBJECTS)
-reiserfs_stage1_5_exec_LDADD = $(LDADD)
-am_start_exec_OBJECTS = start_exec-start.$(OBJEXT)
-start_exec_OBJECTS = $(am_start_exec_OBJECTS)
-start_exec_LDADD = $(LDADD)
-am_start_eltorito_exec_OBJECTS = \
- start_eltorito_exec-start_eltorito.$(OBJEXT)
-start_eltorito_exec_OBJECTS = $(am_start_eltorito_exec_OBJECTS)
-start_eltorito_exec_LDADD = $(LDADD)
-am_ufs2_stage1_5_exec_OBJECTS = ufs2_stage1_5_exec-start.$(OBJEXT) \
- ufs2_stage1_5_exec-asm.$(OBJEXT) \
- ufs2_stage1_5_exec-common.$(OBJEXT) \
- ufs2_stage1_5_exec-char_io.$(OBJEXT) \
- ufs2_stage1_5_exec-disk_io.$(OBJEXT) \
- ufs2_stage1_5_exec-stage1_5.$(OBJEXT) \
- ufs2_stage1_5_exec-fsys_ufs2.$(OBJEXT) \
- ufs2_stage1_5_exec-bios.$(OBJEXT)
-ufs2_stage1_5_exec_OBJECTS = $(am_ufs2_stage1_5_exec_OBJECTS)
-ufs2_stage1_5_exec_LDADD = $(LDADD)
-am_vstafs_stage1_5_exec_OBJECTS = \
- vstafs_stage1_5_exec-start.$(OBJEXT) \
- vstafs_stage1_5_exec-asm.$(OBJEXT) \
- vstafs_stage1_5_exec-common.$(OBJEXT) \
- vstafs_stage1_5_exec-char_io.$(OBJEXT) \
- vstafs_stage1_5_exec-disk_io.$(OBJEXT) \
- vstafs_stage1_5_exec-stage1_5.$(OBJEXT) \
- vstafs_stage1_5_exec-fsys_vstafs.$(OBJEXT) \
- vstafs_stage1_5_exec-bios.$(OBJEXT)
-vstafs_stage1_5_exec_OBJECTS = $(am_vstafs_stage1_5_exec_OBJECTS)
-vstafs_stage1_5_exec_LDADD = $(LDADD)
-am_xfs_stage1_5_exec_OBJECTS = xfs_stage1_5_exec-start.$(OBJEXT) \
- xfs_stage1_5_exec-asm.$(OBJEXT) \
- xfs_stage1_5_exec-common.$(OBJEXT) \
- xfs_stage1_5_exec-char_io.$(OBJEXT) \
- xfs_stage1_5_exec-disk_io.$(OBJEXT) \
- xfs_stage1_5_exec-stage1_5.$(OBJEXT) \
- xfs_stage1_5_exec-fsys_xfs.$(OBJEXT) \
- xfs_stage1_5_exec-bios.$(OBJEXT)
-xfs_stage1_5_exec_OBJECTS = $(am_xfs_stage1_5_exec_OBJECTS)
-xfs_stage1_5_exec_LDADD = $(LDADD)
-SCRIPTS = $(noinst_SCRIPTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) \
- $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) \
- $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) \
- $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) \
- $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) \
- $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) \
- $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) \
- $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) \
- $(xfs_stage1_5_exec_SOURCES)
-DIST_SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) \
- $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) \
- $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) \
- $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) \
- $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) \
- $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) \
- $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) \
- $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) \
- $(xfs_stage1_5_exec_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(pkglibdir)"
-pkglibDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(noinst_DATA) $(pkglib_DATA)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-# Stage 2 and Stage 1.5's.
-pkglibdir = $(libdir)/$(PACKAGE)/$(host_cpu)-$(host_vendor)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-# For test target.
-TESTS = size_test
-noinst_SCRIPTS = $(TESTS)
-
-# For dist target.
-noinst_HEADERS = apic.h defs.h dir.h disk_inode.h disk_inode_ffs.h \
- fat.h filesys.h freebsd.h fs.h hercules.h i386-elf.h \
- imgact_aout.h iso9660.h jfs.h mb_header.h mb_info.h md5.h \
- nbi.h pc_slice.h serial.h shared.h smp-imps.h term.h \
- terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h
-
-EXTRA_DIST = setjmp.S apm.S $(noinst_SCRIPTS)
-
-# For <stage1.h>.
-INCLUDES = -I$(top_srcdir)/stage1
-
-# The library for /sbin/grub.
-noinst_LIBRARIES = libgrub.a
-libgrub_a_SOURCES = boot.c builtins.c char_io.c cmdline.c common.c \
- disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \
- fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \
- fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \
- terminfo.c tparm.c
-
-libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \
- -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
- -DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \
- -DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
- -DUSE_MD5_PASSWORDS=1 -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1
-
-@DISKLESS_SUPPORT_FALSE@pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
-@DISKLESS_SUPPORT_FALSE@ ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
-@DISKLESS_SUPPORT_FALSE@ reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5
-
-@DISKLESS_SUPPORT_TRUE@pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
-@DISKLESS_SUPPORT_TRUE@ ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
-@DISKLESS_SUPPORT_TRUE@ reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5 \
-@DISKLESS_SUPPORT_TRUE@ nbgrub pxegrub
-
-@DISKLESS_SUPPORT_FALSE@noinst_DATA = pre_stage2 start start_eltorito
-@DISKLESS_SUPPORT_TRUE@noinst_DATA = pre_stage2 start start_eltorito nbloader pxeloader diskless
-MOSTLYCLEANFILES = $(noinst_PROGRAMS)
-PRE_STAGE2_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8200
-START_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8000
-NBLOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,0
-PXELOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00
-START_ELTORITO_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00
-@NETBOOT_SUPPORT_FALSE@NETBOOT_FLAGS =
-@NETBOOT_SUPPORT_TRUE@NETBOOT_FLAGS = -I$(top_srcdir)/netboot -DSUPPORT_NETBOOT=1
-@SERIAL_SUPPORT_FALSE@SERIAL_FLAGS =
-@SERIAL_SUPPORT_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1
-@HERCULES_SUPPORT_FALSE@HERCULES_FLAGS =
-@HERCULES_SUPPORT_TRUE@HERCULES_FLAGS = -DSUPPORT_HERCULES=1
-STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
- $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS)
-
-STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000
-STAGE1_5_COMPILE = $(STAGE2_COMPILE) -DNO_DECOMPRESSION=1 -DSTAGE1_5=1
-
-# For stage2 target.
-pre_stage2_exec_SOURCES = asm.S bios.c boot.c builtins.c char_io.c \
- cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \
- fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \
- fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \
- hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c
-
-pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
-pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
-pre_stage2_exec_LDFLAGS = $(PRE_STAGE2_LINK)
-@NETBOOT_SUPPORT_TRUE@pre_stage2_exec_LDADD = ../netboot/libdrivers.a
-@DISKLESS_SUPPORT_FALSE@BUILT_SOURCES = stage2_size.h
-@DISKLESS_SUPPORT_TRUE@BUILT_SOURCES = stage2_size.h diskless_size.h
-CLEANFILES = $(pkglib_DATA) $(noinst_DATA) $(BUILT_SOURCES)
-start_exec_SOURCES = start.S
-start_exec_CCASFLAGS = $(STAGE2_COMPILE)
-start_exec_LDFLAGS = $(START_LINK)
-start_eltorito_exec_SOURCES = start_eltorito.S
-start_eltorito_exec_CCASFLAGS = $(STAGE2_COMPILE)
-start_eltorito_exec_LDFLAGS = $(START_ELTORITO_LINK)
-
-# For e2fs_stage1_5 target.
-e2fs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
- stage1_5.c fsys_ext2fs.c bios.c
-
-e2fs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \
- -DNO_BLOCK_FILES=1
-
-e2fs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \
- -DNO_BLOCK_FILES=1
-
-e2fs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For fat_stage1_5 target.
-fat_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
- stage1_5.c fsys_fat.c bios.c
-
-fat_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \
- -DNO_BLOCK_FILES=1
-
-fat_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \
- -DNO_BLOCK_FILES=1
-
-fat_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For ffs_stage1_5 target.
-ffs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
- stage1_5.c fsys_ffs.c bios.c
-
-ffs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \
- -DNO_BLOCK_FILES=1
-
-ffs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \
- -DNO_BLOCK_FILES=1
-
-ffs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For ufs2_stage1_5 target.
-ufs2_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
- stage1_5.c fsys_ufs2.c bios.c
-
-ufs2_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \
- -DNO_BLOCK_FILES=1
-
-ufs2_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \
- -DNO_BLOCK_FILES=1
-
-ufs2_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For minix_stage1_5 target.
-minix_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
- stage1_5.c fsys_minix.c bios.c
-
-minix_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \
- -DNO_BLOCK_FILES=1
-
-minix_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \
- -DNO_BLOCK_FILES=1
-
-minix_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For reiserfs_stage1_5 target.
-reiserfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
- disk_io.c stage1_5.c fsys_reiserfs.c bios.c
-
-reiserfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \
- -DNO_BLOCK_FILES=1
-
-reiserfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \
- -DNO_BLOCK_FILES=1
-
-reiserfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For vstafs_stage1_5 target.
-vstafs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
- disk_io.c stage1_5.c fsys_vstafs.c bios.c
-
-vstafs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \
- -DNO_BLOCK_FILES=1
-
-vstafs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \
- -DNO_BLOCK_FILES=1
-
-vstafs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For jfs_stage1_5 target.
-jfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
- disk_io.c stage1_5.c fsys_jfs.c bios.c
-
-jfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \
- -DNO_BLOCK_FILES=1
-
-jfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \
- -DNO_BLOCK_FILES=1
-
-jfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For xfs_stage1_5 target.
-xfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
- disk_io.c stage1_5.c fsys_xfs.c bios.c
-
-xfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \
- -DNO_BLOCK_FILES=1
-
-xfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \
- -DNO_BLOCK_FILES=1
-
-xfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For iso9660_stage1_5 target.
-iso9660_stage1_5_exec_SOURCES = start_eltorito.S asm.S common.c char_io.c \
- disk_io.c stage1_5.c fsys_iso9660.c bios.c
-
-iso9660_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \
- -DNO_BLOCK_FILES=1
-
-iso9660_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \
- -DNO_BLOCK_FILES=1
-
-iso9660_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
-
-# For diskless target.
-diskless_exec_SOURCES = $(pre_stage2_exec_SOURCES)
-diskless_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \
- -DSUPPORT_DISKLESS=1
-
-diskless_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \
- -DSUPPORT_DISKLESS=1
-
-diskless_exec_LDFLAGS = $(PRE_STAGE2_LINK)
-diskless_exec_LDADD = ../netboot/libdrivers.a
-
-# For nbloader target.
-nbloader_exec_SOURCES = nbloader.S
-nbloader_exec_CCASFLAGS = $(STAGE2_COMPILE)
-nbloader_exec_LDFLAGS = $(NBLOADER_LINK)
-
-# For pxeloader target.
-pxeloader_exec_SOURCES = pxeloader.S
-pxeloader_exec_CCASFLAGS = $(STAGE2_COMPILE)
-pxeloader_exec_LDFLAGS = $(PXELOADER_LINK)
-
-# General rule for making a raw binary.
-SUFFIXES = .exec
-all: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .exec .S .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stage2/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu stage2/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libgrub.a: $(libgrub_a_OBJECTS) $(libgrub_a_DEPENDENCIES)
- -rm -f libgrub.a
- $(libgrub_a_AR) libgrub.a $(libgrub_a_OBJECTS) $(libgrub_a_LIBADD)
- $(RANLIB) libgrub.a
-
-clean-noinstPROGRAMS:
- -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-diskless.exec$(EXEEXT): $(diskless_exec_OBJECTS) $(diskless_exec_DEPENDENCIES)
- @rm -f diskless.exec$(EXEEXT)
- $(LINK) $(diskless_exec_LDFLAGS) $(diskless_exec_OBJECTS) $(diskless_exec_LDADD) $(LIBS)
-e2fs_stage1_5.exec$(EXEEXT): $(e2fs_stage1_5_exec_OBJECTS) $(e2fs_stage1_5_exec_DEPENDENCIES)
- @rm -f e2fs_stage1_5.exec$(EXEEXT)
- $(LINK) $(e2fs_stage1_5_exec_LDFLAGS) $(e2fs_stage1_5_exec_OBJECTS) $(e2fs_stage1_5_exec_LDADD) $(LIBS)
-fat_stage1_5.exec$(EXEEXT): $(fat_stage1_5_exec_OBJECTS) $(fat_stage1_5_exec_DEPENDENCIES)
- @rm -f fat_stage1_5.exec$(EXEEXT)
- $(LINK) $(fat_stage1_5_exec_LDFLAGS) $(fat_stage1_5_exec_OBJECTS) $(fat_stage1_5_exec_LDADD) $(LIBS)
-ffs_stage1_5.exec$(EXEEXT): $(ffs_stage1_5_exec_OBJECTS) $(ffs_stage1_5_exec_DEPENDENCIES)
- @rm -f ffs_stage1_5.exec$(EXEEXT)
- $(LINK) $(ffs_stage1_5_exec_LDFLAGS) $(ffs_stage1_5_exec_OBJECTS) $(ffs_stage1_5_exec_LDADD) $(LIBS)
-iso9660_stage1_5.exec$(EXEEXT): $(iso9660_stage1_5_exec_OBJECTS) $(iso9660_stage1_5_exec_DEPENDENCIES)
- @rm -f iso9660_stage1_5.exec$(EXEEXT)
- $(LINK) $(iso9660_stage1_5_exec_LDFLAGS) $(iso9660_stage1_5_exec_OBJECTS) $(iso9660_stage1_5_exec_LDADD) $(LIBS)
-jfs_stage1_5.exec$(EXEEXT): $(jfs_stage1_5_exec_OBJECTS) $(jfs_stage1_5_exec_DEPENDENCIES)
- @rm -f jfs_stage1_5.exec$(EXEEXT)
- $(LINK) $(jfs_stage1_5_exec_LDFLAGS) $(jfs_stage1_5_exec_OBJECTS) $(jfs_stage1_5_exec_LDADD) $(LIBS)
-minix_stage1_5.exec$(EXEEXT): $(minix_stage1_5_exec_OBJECTS) $(minix_stage1_5_exec_DEPENDENCIES)
- @rm -f minix_stage1_5.exec$(EXEEXT)
- $(LINK) $(minix_stage1_5_exec_LDFLAGS) $(minix_stage1_5_exec_OBJECTS) $(minix_stage1_5_exec_LDADD) $(LIBS)
-nbloader.exec$(EXEEXT): $(nbloader_exec_OBJECTS) $(nbloader_exec_DEPENDENCIES)
- @rm -f nbloader.exec$(EXEEXT)
- $(LINK) $(nbloader_exec_LDFLAGS) $(nbloader_exec_OBJECTS) $(nbloader_exec_LDADD) $(LIBS)
-pre_stage2.exec$(EXEEXT): $(pre_stage2_exec_OBJECTS) $(pre_stage2_exec_DEPENDENCIES)
- @rm -f pre_stage2.exec$(EXEEXT)
- $(LINK) $(pre_stage2_exec_LDFLAGS) $(pre_stage2_exec_OBJECTS) $(pre_stage2_exec_LDADD) $(LIBS)
-pxeloader.exec$(EXEEXT): $(pxeloader_exec_OBJECTS) $(pxeloader_exec_DEPENDENCIES)
- @rm -f pxeloader.exec$(EXEEXT)
- $(LINK) $(pxeloader_exec_LDFLAGS) $(pxeloader_exec_OBJECTS) $(pxeloader_exec_LDADD) $(LIBS)
-reiserfs_stage1_5.exec$(EXEEXT): $(reiserfs_stage1_5_exec_OBJECTS) $(reiserfs_stage1_5_exec_DEPENDENCIES)
- @rm -f reiserfs_stage1_5.exec$(EXEEXT)
- $(LINK) $(reiserfs_stage1_5_exec_LDFLAGS) $(reiserfs_stage1_5_exec_OBJECTS) $(reiserfs_stage1_5_exec_LDADD) $(LIBS)
-start.exec$(EXEEXT): $(start_exec_OBJECTS) $(start_exec_DEPENDENCIES)
- @rm -f start.exec$(EXEEXT)
- $(LINK) $(start_exec_LDFLAGS) $(start_exec_OBJECTS) $(start_exec_LDADD) $(LIBS)
-start_eltorito.exec$(EXEEXT): $(start_eltorito_exec_OBJECTS) $(start_eltorito_exec_DEPENDENCIES)
- @rm -f start_eltorito.exec$(EXEEXT)
- $(LINK) $(start_eltorito_exec_LDFLAGS) $(start_eltorito_exec_OBJECTS) $(start_eltorito_exec_LDADD) $(LIBS)
-ufs2_stage1_5.exec$(EXEEXT): $(ufs2_stage1_5_exec_OBJECTS) $(ufs2_stage1_5_exec_DEPENDENCIES)
- @rm -f ufs2_stage1_5.exec$(EXEEXT)
- $(LINK) $(ufs2_stage1_5_exec_LDFLAGS) $(ufs2_stage1_5_exec_OBJECTS) $(ufs2_stage1_5_exec_LDADD) $(LIBS)
-vstafs_stage1_5.exec$(EXEEXT): $(vstafs_stage1_5_exec_OBJECTS) $(vstafs_stage1_5_exec_DEPENDENCIES)
- @rm -f vstafs_stage1_5.exec$(EXEEXT)
- $(LINK) $(vstafs_stage1_5_exec_LDFLAGS) $(vstafs_stage1_5_exec_OBJECTS) $(vstafs_stage1_5_exec_LDADD) $(LIBS)
-xfs_stage1_5.exec$(EXEEXT): $(xfs_stage1_5_exec_OBJECTS) $(xfs_stage1_5_exec_DEPENDENCIES)
- @rm -f xfs_stage1_5.exec$(EXEEXT)
- $(LINK) $(xfs_stage1_5_exec_LDFLAGS) $(xfs_stage1_5_exec_OBJECTS) $(xfs_stage1_5_exec_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-boot.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-builtins.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-cmdline.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-console.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ext2fs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_fat.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ffs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_iso9660.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_jfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_minix.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_reiserfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ufs2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_vstafs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_xfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-gunzip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-hercules.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-md5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-serial.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-smp-imps.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-stage2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-terminfo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-tparm.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-boot.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-builtins.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-cmdline.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ext2fs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_fat.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ffs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_iso9660.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_jfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_minix.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_reiserfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ufs2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_vstafs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_xfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-gunzip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-md5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-serial.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-stage2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-terminfo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-tparm.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-boot.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-builtins.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-cmdline.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-console.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_fat.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_minix.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-gunzip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-hercules.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-md5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-serial.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-smp-imps.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-stage2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-terminfo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-tparm.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-bios.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-char_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-common.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po@am__quote@
-
-.S.o:
- $(CCASCOMPILE) -c $<
-
-.S.obj:
- $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
-
-diskless_exec-asm.o: asm.S
- $(CCAS) $(diskless_exec_CCASFLAGS) $(CCASFLAGS) -c -o diskless_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-diskless_exec-asm.obj: asm.S
- $(CCAS) $(diskless_exec_CCASFLAGS) $(CCASFLAGS) -c -o diskless_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-e2fs_stage1_5_exec-start.o: start.S
- $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-e2fs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-e2fs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-e2fs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-fat_stage1_5_exec-start.o: start.S
- $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-fat_stage1_5_exec-start.obj: start.S
- $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-fat_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-fat_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-ffs_stage1_5_exec-start.o: start.S
- $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-ffs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-ffs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-ffs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-iso9660_stage1_5_exec-start_eltorito.o: start_eltorito.S
- $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-start_eltorito.o `test -f 'start_eltorito.S' || echo '$(srcdir)/'`start_eltorito.S
-
-iso9660_stage1_5_exec-start_eltorito.obj: start_eltorito.S
- $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-start_eltorito.obj `if test -f 'start_eltorito.S'; then $(CYGPATH_W) 'start_eltorito.S'; else $(CYGPATH_W) '$(srcdir)/start_eltorito.S'; fi`
-
-iso9660_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-iso9660_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-jfs_stage1_5_exec-start.o: start.S
- $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-jfs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-jfs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-jfs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-minix_stage1_5_exec-start.o: start.S
- $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-minix_stage1_5_exec-start.obj: start.S
- $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-minix_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-minix_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-nbloader_exec-nbloader.o: nbloader.S
- $(CCAS) $(nbloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o nbloader_exec-nbloader.o `test -f 'nbloader.S' || echo '$(srcdir)/'`nbloader.S
-
-nbloader_exec-nbloader.obj: nbloader.S
- $(CCAS) $(nbloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o nbloader_exec-nbloader.obj `if test -f 'nbloader.S'; then $(CYGPATH_W) 'nbloader.S'; else $(CYGPATH_W) '$(srcdir)/nbloader.S'; fi`
-
-pre_stage2_exec-asm.o: asm.S
- $(CCAS) $(pre_stage2_exec_CCASFLAGS) $(CCASFLAGS) -c -o pre_stage2_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-pre_stage2_exec-asm.obj: asm.S
- $(CCAS) $(pre_stage2_exec_CCASFLAGS) $(CCASFLAGS) -c -o pre_stage2_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-pxeloader_exec-pxeloader.o: pxeloader.S
- $(CCAS) $(pxeloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o pxeloader_exec-pxeloader.o `test -f 'pxeloader.S' || echo '$(srcdir)/'`pxeloader.S
-
-pxeloader_exec-pxeloader.obj: pxeloader.S
- $(CCAS) $(pxeloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o pxeloader_exec-pxeloader.obj `if test -f 'pxeloader.S'; then $(CYGPATH_W) 'pxeloader.S'; else $(CYGPATH_W) '$(srcdir)/pxeloader.S'; fi`
-
-reiserfs_stage1_5_exec-start.o: start.S
- $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-reiserfs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-reiserfs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-reiserfs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-start_exec-start.o: start.S
- $(CCAS) $(start_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-start_exec-start.obj: start.S
- $(CCAS) $(start_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-start_eltorito_exec-start_eltorito.o: start_eltorito.S
- $(CCAS) $(start_eltorito_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_eltorito_exec-start_eltorito.o `test -f 'start_eltorito.S' || echo '$(srcdir)/'`start_eltorito.S
-
-start_eltorito_exec-start_eltorito.obj: start_eltorito.S
- $(CCAS) $(start_eltorito_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_eltorito_exec-start_eltorito.obj `if test -f 'start_eltorito.S'; then $(CYGPATH_W) 'start_eltorito.S'; else $(CYGPATH_W) '$(srcdir)/start_eltorito.S'; fi`
-
-ufs2_stage1_5_exec-start.o: start.S
- $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-ufs2_stage1_5_exec-start.obj: start.S
- $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-ufs2_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-ufs2_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-vstafs_stage1_5_exec-start.o: start.S
- $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-vstafs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-vstafs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-vstafs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-xfs_stage1_5_exec-start.o: start.S
- $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S
-
-xfs_stage1_5_exec-start.obj: start.S
- $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi`
-
-xfs_stage1_5_exec-asm.o: asm.S
- $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S
-
-xfs_stage1_5_exec-asm.obj: asm.S
- $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi`
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-libgrub_a-boot.o: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-boot.o -MD -MP -MF "$(DEPDIR)/libgrub_a-boot.Tpo" -c -o libgrub_a-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-boot.Tpo" "$(DEPDIR)/libgrub_a-boot.Po"; else rm -f "$(DEPDIR)/libgrub_a-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='libgrub_a-boot.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c
-
-libgrub_a-boot.obj: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-boot.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-boot.Tpo" -c -o libgrub_a-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-boot.Tpo" "$(DEPDIR)/libgrub_a-boot.Po"; else rm -f "$(DEPDIR)/libgrub_a-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='libgrub_a-boot.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`
-
-libgrub_a-builtins.o: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-builtins.o -MD -MP -MF "$(DEPDIR)/libgrub_a-builtins.Tpo" -c -o libgrub_a-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-builtins.Tpo" "$(DEPDIR)/libgrub_a-builtins.Po"; else rm -f "$(DEPDIR)/libgrub_a-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='libgrub_a-builtins.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c
-
-libgrub_a-builtins.obj: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-builtins.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-builtins.Tpo" -c -o libgrub_a-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-builtins.Tpo" "$(DEPDIR)/libgrub_a-builtins.Po"; else rm -f "$(DEPDIR)/libgrub_a-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='libgrub_a-builtins.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`
-
-libgrub_a-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-char_io.o -MD -MP -MF "$(DEPDIR)/libgrub_a-char_io.Tpo" -c -o libgrub_a-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-char_io.Tpo" "$(DEPDIR)/libgrub_a-char_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='libgrub_a-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-libgrub_a-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-char_io.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-char_io.Tpo" -c -o libgrub_a-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-char_io.Tpo" "$(DEPDIR)/libgrub_a-char_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='libgrub_a-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-libgrub_a-cmdline.o: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-cmdline.o -MD -MP -MF "$(DEPDIR)/libgrub_a-cmdline.Tpo" -c -o libgrub_a-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-cmdline.Tpo" "$(DEPDIR)/libgrub_a-cmdline.Po"; else rm -f "$(DEPDIR)/libgrub_a-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='libgrub_a-cmdline.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c
-
-libgrub_a-cmdline.obj: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-cmdline.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-cmdline.Tpo" -c -o libgrub_a-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-cmdline.Tpo" "$(DEPDIR)/libgrub_a-cmdline.Po"; else rm -f "$(DEPDIR)/libgrub_a-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='libgrub_a-cmdline.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`
-
-libgrub_a-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-common.o -MD -MP -MF "$(DEPDIR)/libgrub_a-common.Tpo" -c -o libgrub_a-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-common.Tpo" "$(DEPDIR)/libgrub_a-common.Po"; else rm -f "$(DEPDIR)/libgrub_a-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='libgrub_a-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-libgrub_a-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-common.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-common.Tpo" -c -o libgrub_a-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-common.Tpo" "$(DEPDIR)/libgrub_a-common.Po"; else rm -f "$(DEPDIR)/libgrub_a-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='libgrub_a-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-libgrub_a-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-disk_io.o -MD -MP -MF "$(DEPDIR)/libgrub_a-disk_io.Tpo" -c -o libgrub_a-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-disk_io.Tpo" "$(DEPDIR)/libgrub_a-disk_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='libgrub_a-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-libgrub_a-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-disk_io.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-disk_io.Tpo" -c -o libgrub_a-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-disk_io.Tpo" "$(DEPDIR)/libgrub_a-disk_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='libgrub_a-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-libgrub_a-fsys_ext2fs.o: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" -c -o libgrub_a-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='libgrub_a-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c
-
-libgrub_a-fsys_ext2fs.obj: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" -c -o libgrub_a-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='libgrub_a-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`
-
-libgrub_a-fsys_fat.o: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_fat.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" -c -o libgrub_a-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" "$(DEPDIR)/libgrub_a-fsys_fat.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='libgrub_a-fsys_fat.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c
-
-libgrub_a-fsys_fat.obj: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" -c -o libgrub_a-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" "$(DEPDIR)/libgrub_a-fsys_fat.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='libgrub_a-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`
-
-libgrub_a-fsys_ffs.o: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" -c -o libgrub_a-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ffs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='libgrub_a-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c
-
-libgrub_a-fsys_ffs.obj: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" -c -o libgrub_a-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ffs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='libgrub_a-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`
-
-libgrub_a-fsys_iso9660.o: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" -c -o libgrub_a-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" "$(DEPDIR)/libgrub_a-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='libgrub_a-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c
-
-libgrub_a-fsys_iso9660.obj: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" -c -o libgrub_a-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" "$(DEPDIR)/libgrub_a-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='libgrub_a-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`
-
-libgrub_a-fsys_jfs.o: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" -c -o libgrub_a-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_jfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='libgrub_a-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c
-
-libgrub_a-fsys_jfs.obj: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" -c -o libgrub_a-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_jfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='libgrub_a-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`
-
-libgrub_a-fsys_minix.o: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_minix.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" -c -o libgrub_a-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" "$(DEPDIR)/libgrub_a-fsys_minix.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='libgrub_a-fsys_minix.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c
-
-libgrub_a-fsys_minix.obj: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" -c -o libgrub_a-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" "$(DEPDIR)/libgrub_a-fsys_minix.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='libgrub_a-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`
-
-libgrub_a-fsys_reiserfs.o: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" -c -o libgrub_a-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='libgrub_a-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c
-
-libgrub_a-fsys_reiserfs.obj: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" -c -o libgrub_a-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='libgrub_a-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`
-
-libgrub_a-fsys_ufs2.o: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" -c -o libgrub_a-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" "$(DEPDIR)/libgrub_a-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='libgrub_a-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c
-
-libgrub_a-fsys_ufs2.obj: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" -c -o libgrub_a-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" "$(DEPDIR)/libgrub_a-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='libgrub_a-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`
-
-libgrub_a-fsys_vstafs.o: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" -c -o libgrub_a-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" "$(DEPDIR)/libgrub_a-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='libgrub_a-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c
-
-libgrub_a-fsys_vstafs.obj: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" -c -o libgrub_a-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" "$(DEPDIR)/libgrub_a-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='libgrub_a-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`
-
-libgrub_a-fsys_xfs.o: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" -c -o libgrub_a-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_xfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='libgrub_a-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c
-
-libgrub_a-fsys_xfs.obj: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" -c -o libgrub_a-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_xfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='libgrub_a-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`
-
-libgrub_a-gunzip.o: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-gunzip.o -MD -MP -MF "$(DEPDIR)/libgrub_a-gunzip.Tpo" -c -o libgrub_a-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-gunzip.Tpo" "$(DEPDIR)/libgrub_a-gunzip.Po"; else rm -f "$(DEPDIR)/libgrub_a-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='libgrub_a-gunzip.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c
-
-libgrub_a-gunzip.obj: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-gunzip.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-gunzip.Tpo" -c -o libgrub_a-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-gunzip.Tpo" "$(DEPDIR)/libgrub_a-gunzip.Po"; else rm -f "$(DEPDIR)/libgrub_a-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='libgrub_a-gunzip.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`
-
-libgrub_a-md5.o: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-md5.o -MD -MP -MF "$(DEPDIR)/libgrub_a-md5.Tpo" -c -o libgrub_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-md5.Tpo" "$(DEPDIR)/libgrub_a-md5.Po"; else rm -f "$(DEPDIR)/libgrub_a-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='libgrub_a-md5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
-
-libgrub_a-md5.obj: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-md5.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-md5.Tpo" -c -o libgrub_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-md5.Tpo" "$(DEPDIR)/libgrub_a-md5.Po"; else rm -f "$(DEPDIR)/libgrub_a-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='libgrub_a-md5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
-
-libgrub_a-serial.o: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-serial.o -MD -MP -MF "$(DEPDIR)/libgrub_a-serial.Tpo" -c -o libgrub_a-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-serial.Tpo" "$(DEPDIR)/libgrub_a-serial.Po"; else rm -f "$(DEPDIR)/libgrub_a-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='libgrub_a-serial.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c
-
-libgrub_a-serial.obj: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-serial.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-serial.Tpo" -c -o libgrub_a-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-serial.Tpo" "$(DEPDIR)/libgrub_a-serial.Po"; else rm -f "$(DEPDIR)/libgrub_a-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='libgrub_a-serial.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`
-
-libgrub_a-stage2.o: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-stage2.o -MD -MP -MF "$(DEPDIR)/libgrub_a-stage2.Tpo" -c -o libgrub_a-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-stage2.Tpo" "$(DEPDIR)/libgrub_a-stage2.Po"; else rm -f "$(DEPDIR)/libgrub_a-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='libgrub_a-stage2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c
-
-libgrub_a-stage2.obj: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-stage2.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-stage2.Tpo" -c -o libgrub_a-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-stage2.Tpo" "$(DEPDIR)/libgrub_a-stage2.Po"; else rm -f "$(DEPDIR)/libgrub_a-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='libgrub_a-stage2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`
-
-libgrub_a-terminfo.o: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-terminfo.o -MD -MP -MF "$(DEPDIR)/libgrub_a-terminfo.Tpo" -c -o libgrub_a-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-terminfo.Tpo" "$(DEPDIR)/libgrub_a-terminfo.Po"; else rm -f "$(DEPDIR)/libgrub_a-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='libgrub_a-terminfo.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c
-
-libgrub_a-terminfo.obj: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-terminfo.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-terminfo.Tpo" -c -o libgrub_a-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-terminfo.Tpo" "$(DEPDIR)/libgrub_a-terminfo.Po"; else rm -f "$(DEPDIR)/libgrub_a-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='libgrub_a-terminfo.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`
-
-libgrub_a-tparm.o: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-tparm.o -MD -MP -MF "$(DEPDIR)/libgrub_a-tparm.Tpo" -c -o libgrub_a-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-tparm.Tpo" "$(DEPDIR)/libgrub_a-tparm.Po"; else rm -f "$(DEPDIR)/libgrub_a-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='libgrub_a-tparm.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c
-
-libgrub_a-tparm.obj: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-tparm.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-tparm.Tpo" -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-tparm.Tpo" "$(DEPDIR)/libgrub_a-tparm.Po"; else rm -f "$(DEPDIR)/libgrub_a-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='libgrub_a-tparm.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-diskless_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.o -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='diskless_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-diskless_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='diskless_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-diskless_exec-boot.o: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-boot.o -MD -MP -MF "$(DEPDIR)/diskless_exec-boot.Tpo" -c -o diskless_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-boot.Tpo" "$(DEPDIR)/diskless_exec-boot.Po"; else rm -f "$(DEPDIR)/diskless_exec-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='diskless_exec-boot.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c
-
-diskless_exec-boot.obj: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-boot.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-boot.Tpo" -c -o diskless_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-boot.Tpo" "$(DEPDIR)/diskless_exec-boot.Po"; else rm -f "$(DEPDIR)/diskless_exec-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='diskless_exec-boot.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`
-
-diskless_exec-builtins.o: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-builtins.o -MD -MP -MF "$(DEPDIR)/diskless_exec-builtins.Tpo" -c -o diskless_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-builtins.Tpo" "$(DEPDIR)/diskless_exec-builtins.Po"; else rm -f "$(DEPDIR)/diskless_exec-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='diskless_exec-builtins.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c
-
-diskless_exec-builtins.obj: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-builtins.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-builtins.Tpo" -c -o diskless_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-builtins.Tpo" "$(DEPDIR)/diskless_exec-builtins.Po"; else rm -f "$(DEPDIR)/diskless_exec-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='diskless_exec-builtins.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`
-
-diskless_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-char_io.o -MD -MP -MF "$(DEPDIR)/diskless_exec-char_io.Tpo" -c -o diskless_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-char_io.Tpo" "$(DEPDIR)/diskless_exec-char_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='diskless_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-diskless_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-char_io.Tpo" -c -o diskless_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-char_io.Tpo" "$(DEPDIR)/diskless_exec-char_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='diskless_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-diskless_exec-cmdline.o: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-cmdline.o -MD -MP -MF "$(DEPDIR)/diskless_exec-cmdline.Tpo" -c -o diskless_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-cmdline.Tpo" "$(DEPDIR)/diskless_exec-cmdline.Po"; else rm -f "$(DEPDIR)/diskless_exec-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='diskless_exec-cmdline.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c
-
-diskless_exec-cmdline.obj: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-cmdline.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-cmdline.Tpo" -c -o diskless_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-cmdline.Tpo" "$(DEPDIR)/diskless_exec-cmdline.Po"; else rm -f "$(DEPDIR)/diskless_exec-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='diskless_exec-cmdline.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`
-
-diskless_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-common.o -MD -MP -MF "$(DEPDIR)/diskless_exec-common.Tpo" -c -o diskless_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-common.Tpo" "$(DEPDIR)/diskless_exec-common.Po"; else rm -f "$(DEPDIR)/diskless_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='diskless_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-diskless_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-common.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-common.Tpo" -c -o diskless_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-common.Tpo" "$(DEPDIR)/diskless_exec-common.Po"; else rm -f "$(DEPDIR)/diskless_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='diskless_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-diskless_exec-console.o: console.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-console.o -MD -MP -MF "$(DEPDIR)/diskless_exec-console.Tpo" -c -o diskless_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-console.Tpo" "$(DEPDIR)/diskless_exec-console.Po"; else rm -f "$(DEPDIR)/diskless_exec-console.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='diskless_exec-console.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c
-
-diskless_exec-console.obj: console.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-console.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-console.Tpo" -c -o diskless_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-console.Tpo" "$(DEPDIR)/diskless_exec-console.Po"; else rm -f "$(DEPDIR)/diskless_exec-console.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='diskless_exec-console.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`
-
-diskless_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/diskless_exec-disk_io.Tpo" -c -o diskless_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-disk_io.Tpo" "$(DEPDIR)/diskless_exec-disk_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='diskless_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-diskless_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-disk_io.Tpo" -c -o diskless_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-disk_io.Tpo" "$(DEPDIR)/diskless_exec-disk_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='diskless_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-diskless_exec-fsys_ext2fs.o: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" -c -o diskless_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='diskless_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c
-
-diskless_exec-fsys_ext2fs.obj: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" -c -o diskless_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='diskless_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`
-
-diskless_exec-fsys_fat.o: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" -c -o diskless_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" "$(DEPDIR)/diskless_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='diskless_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c
-
-diskless_exec-fsys_fat.obj: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" -c -o diskless_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" "$(DEPDIR)/diskless_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='diskless_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`
-
-diskless_exec-fsys_ffs.o: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" -c -o diskless_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='diskless_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c
-
-diskless_exec-fsys_ffs.obj: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" -c -o diskless_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='diskless_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`
-
-diskless_exec-fsys_iso9660.o: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" -c -o diskless_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" "$(DEPDIR)/diskless_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='diskless_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c
-
-diskless_exec-fsys_iso9660.obj: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" -c -o diskless_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" "$(DEPDIR)/diskless_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='diskless_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`
-
-diskless_exec-fsys_jfs.o: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" -c -o diskless_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='diskless_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c
-
-diskless_exec-fsys_jfs.obj: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" -c -o diskless_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='diskless_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`
-
-diskless_exec-fsys_minix.o: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" -c -o diskless_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" "$(DEPDIR)/diskless_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='diskless_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c
-
-diskless_exec-fsys_minix.obj: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" -c -o diskless_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" "$(DEPDIR)/diskless_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='diskless_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`
-
-diskless_exec-fsys_reiserfs.o: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" -c -o diskless_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='diskless_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c
-
-diskless_exec-fsys_reiserfs.obj: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" -c -o diskless_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='diskless_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`
-
-diskless_exec-fsys_ufs2.o: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" -c -o diskless_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" "$(DEPDIR)/diskless_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='diskless_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c
-
-diskless_exec-fsys_ufs2.obj: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" -c -o diskless_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" "$(DEPDIR)/diskless_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='diskless_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`
-
-diskless_exec-fsys_vstafs.o: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" -c -o diskless_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" "$(DEPDIR)/diskless_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='diskless_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c
-
-diskless_exec-fsys_vstafs.obj: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" -c -o diskless_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" "$(DEPDIR)/diskless_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='diskless_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`
-
-diskless_exec-fsys_xfs.o: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" -c -o diskless_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='diskless_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c
-
-diskless_exec-fsys_xfs.obj: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" -c -o diskless_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='diskless_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`
-
-diskless_exec-gunzip.o: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-gunzip.o -MD -MP -MF "$(DEPDIR)/diskless_exec-gunzip.Tpo" -c -o diskless_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-gunzip.Tpo" "$(DEPDIR)/diskless_exec-gunzip.Po"; else rm -f "$(DEPDIR)/diskless_exec-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='diskless_exec-gunzip.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c
-
-diskless_exec-gunzip.obj: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-gunzip.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-gunzip.Tpo" -c -o diskless_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-gunzip.Tpo" "$(DEPDIR)/diskless_exec-gunzip.Po"; else rm -f "$(DEPDIR)/diskless_exec-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='diskless_exec-gunzip.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`
-
-diskless_exec-hercules.o: hercules.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-hercules.o -MD -MP -MF "$(DEPDIR)/diskless_exec-hercules.Tpo" -c -o diskless_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-hercules.Tpo" "$(DEPDIR)/diskless_exec-hercules.Po"; else rm -f "$(DEPDIR)/diskless_exec-hercules.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='diskless_exec-hercules.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c
-
-diskless_exec-hercules.obj: hercules.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-hercules.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-hercules.Tpo" -c -o diskless_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-hercules.Tpo" "$(DEPDIR)/diskless_exec-hercules.Po"; else rm -f "$(DEPDIR)/diskless_exec-hercules.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='diskless_exec-hercules.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`
-
-diskless_exec-md5.o: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-md5.o -MD -MP -MF "$(DEPDIR)/diskless_exec-md5.Tpo" -c -o diskless_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-md5.Tpo" "$(DEPDIR)/diskless_exec-md5.Po"; else rm -f "$(DEPDIR)/diskless_exec-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='diskless_exec-md5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
-
-diskless_exec-md5.obj: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-md5.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-md5.Tpo" -c -o diskless_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-md5.Tpo" "$(DEPDIR)/diskless_exec-md5.Po"; else rm -f "$(DEPDIR)/diskless_exec-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='diskless_exec-md5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
-
-diskless_exec-serial.o: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-serial.o -MD -MP -MF "$(DEPDIR)/diskless_exec-serial.Tpo" -c -o diskless_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-serial.Tpo" "$(DEPDIR)/diskless_exec-serial.Po"; else rm -f "$(DEPDIR)/diskless_exec-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='diskless_exec-serial.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c
-
-diskless_exec-serial.obj: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-serial.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-serial.Tpo" -c -o diskless_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-serial.Tpo" "$(DEPDIR)/diskless_exec-serial.Po"; else rm -f "$(DEPDIR)/diskless_exec-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='diskless_exec-serial.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`
-
-diskless_exec-smp-imps.o: smp-imps.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-smp-imps.o -MD -MP -MF "$(DEPDIR)/diskless_exec-smp-imps.Tpo" -c -o diskless_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo" "$(DEPDIR)/diskless_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='diskless_exec-smp-imps.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c
-
-diskless_exec-smp-imps.obj: smp-imps.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-smp-imps.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-smp-imps.Tpo" -c -o diskless_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo" "$(DEPDIR)/diskless_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='diskless_exec-smp-imps.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`
-
-diskless_exec-stage2.o: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-stage2.o -MD -MP -MF "$(DEPDIR)/diskless_exec-stage2.Tpo" -c -o diskless_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-stage2.Tpo" "$(DEPDIR)/diskless_exec-stage2.Po"; else rm -f "$(DEPDIR)/diskless_exec-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='diskless_exec-stage2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c
-
-diskless_exec-stage2.obj: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-stage2.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-stage2.Tpo" -c -o diskless_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-stage2.Tpo" "$(DEPDIR)/diskless_exec-stage2.Po"; else rm -f "$(DEPDIR)/diskless_exec-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='diskless_exec-stage2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`
-
-diskless_exec-terminfo.o: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-terminfo.o -MD -MP -MF "$(DEPDIR)/diskless_exec-terminfo.Tpo" -c -o diskless_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-terminfo.Tpo" "$(DEPDIR)/diskless_exec-terminfo.Po"; else rm -f "$(DEPDIR)/diskless_exec-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='diskless_exec-terminfo.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c
-
-diskless_exec-terminfo.obj: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-terminfo.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-terminfo.Tpo" -c -o diskless_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-terminfo.Tpo" "$(DEPDIR)/diskless_exec-terminfo.Po"; else rm -f "$(DEPDIR)/diskless_exec-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='diskless_exec-terminfo.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`
-
-diskless_exec-tparm.o: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-tparm.o -MD -MP -MF "$(DEPDIR)/diskless_exec-tparm.Tpo" -c -o diskless_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-tparm.Tpo" "$(DEPDIR)/diskless_exec-tparm.Po"; else rm -f "$(DEPDIR)/diskless_exec-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='diskless_exec-tparm.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c
-
-diskless_exec-tparm.obj: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-tparm.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-tparm.Tpo" -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-tparm.Tpo" "$(DEPDIR)/diskless_exec-tparm.Po"; else rm -f "$(DEPDIR)/diskless_exec-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='diskless_exec-tparm.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-e2fs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='e2fs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-e2fs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='e2fs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-e2fs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" -c -o e2fs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='e2fs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-e2fs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" -c -o e2fs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='e2fs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-e2fs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" -c -o e2fs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='e2fs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-e2fs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" -c -o e2fs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='e2fs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-e2fs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" -c -o e2fs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='e2fs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-e2fs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" -c -o e2fs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='e2fs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-e2fs_stage1_5_exec-fsys_ext2fs.o: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" -c -o e2fs_stage1_5_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='e2fs_stage1_5_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c
-
-e2fs_stage1_5_exec-fsys_ext2fs.obj: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" -c -o e2fs_stage1_5_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='e2fs_stage1_5_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`
-
-e2fs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" -c -o e2fs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='e2fs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-e2fs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" -c -o e2fs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='e2fs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-fat_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" -c -o fat_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" "$(DEPDIR)/fat_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='fat_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-fat_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" -c -o fat_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" "$(DEPDIR)/fat_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='fat_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-fat_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" -c -o fat_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='fat_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-fat_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" -c -o fat_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='fat_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-fat_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" -c -o fat_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='fat_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-fat_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" -c -o fat_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='fat_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-fat_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" -c -o fat_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='fat_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-fat_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" -c -o fat_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='fat_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-fat_stage1_5_exec-fsys_fat.o: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" -c -o fat_stage1_5_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='fat_stage1_5_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c
-
-fat_stage1_5_exec-fsys_fat.obj: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" -c -o fat_stage1_5_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='fat_stage1_5_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`
-
-fat_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" -c -o fat_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" "$(DEPDIR)/fat_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='fat_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-fat_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" -c -o fat_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" "$(DEPDIR)/fat_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='fat_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-ffs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" -c -o ffs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ffs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-ffs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" -c -o ffs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ffs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-ffs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" -c -o ffs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ffs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-ffs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" -c -o ffs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ffs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-ffs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" -c -o ffs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ffs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-ffs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" -c -o ffs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ffs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-ffs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" -c -o ffs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ffs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-ffs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" -c -o ffs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ffs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-ffs_stage1_5_exec-fsys_ffs.o: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" -c -o ffs_stage1_5_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='ffs_stage1_5_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c
-
-ffs_stage1_5_exec-fsys_ffs.obj: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" -c -o ffs_stage1_5_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='ffs_stage1_5_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`
-
-ffs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" -c -o ffs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ffs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-ffs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" -c -o ffs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ffs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-iso9660_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" -c -o iso9660_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='iso9660_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-iso9660_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" -c -o iso9660_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='iso9660_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-iso9660_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" -c -o iso9660_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='iso9660_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-iso9660_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" -c -o iso9660_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='iso9660_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-iso9660_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" -c -o iso9660_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='iso9660_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-iso9660_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" -c -o iso9660_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='iso9660_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-iso9660_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" -c -o iso9660_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='iso9660_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-iso9660_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" -c -o iso9660_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='iso9660_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-iso9660_stage1_5_exec-fsys_iso9660.o: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" -c -o iso9660_stage1_5_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='iso9660_stage1_5_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c
-
-iso9660_stage1_5_exec-fsys_iso9660.obj: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" -c -o iso9660_stage1_5_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='iso9660_stage1_5_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`
-
-iso9660_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" -c -o iso9660_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='iso9660_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-iso9660_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" -c -o iso9660_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='iso9660_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-jfs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" -c -o jfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='jfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-jfs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" -c -o jfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='jfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-jfs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" -c -o jfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='jfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-jfs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" -c -o jfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='jfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-jfs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" -c -o jfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='jfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-jfs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" -c -o jfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='jfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-jfs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" -c -o jfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='jfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-jfs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" -c -o jfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='jfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-jfs_stage1_5_exec-fsys_jfs.o: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" -c -o jfs_stage1_5_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='jfs_stage1_5_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c
-
-jfs_stage1_5_exec-fsys_jfs.obj: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" -c -o jfs_stage1_5_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='jfs_stage1_5_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`
-
-jfs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" -c -o jfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='jfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-jfs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" -c -o jfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='jfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-minix_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" -c -o minix_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" "$(DEPDIR)/minix_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='minix_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-minix_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" -c -o minix_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" "$(DEPDIR)/minix_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='minix_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-minix_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" -c -o minix_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='minix_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-minix_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" -c -o minix_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='minix_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-minix_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" -c -o minix_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='minix_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-minix_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" -c -o minix_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='minix_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-minix_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" -c -o minix_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='minix_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-minix_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" -c -o minix_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='minix_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-minix_stage1_5_exec-fsys_minix.o: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" -c -o minix_stage1_5_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='minix_stage1_5_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c
-
-minix_stage1_5_exec-fsys_minix.obj: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" -c -o minix_stage1_5_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='minix_stage1_5_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`
-
-minix_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" -c -o minix_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" "$(DEPDIR)/minix_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='minix_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-minix_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" -c -o minix_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" "$(DEPDIR)/minix_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='minix_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-pre_stage2_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-bios.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-bios.Tpo" -c -o pre_stage2_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo" "$(DEPDIR)/pre_stage2_exec-bios.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='pre_stage2_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-pre_stage2_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-bios.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-bios.Tpo" -c -o pre_stage2_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo" "$(DEPDIR)/pre_stage2_exec-bios.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='pre_stage2_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-pre_stage2_exec-boot.o: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-boot.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-boot.Tpo" -c -o pre_stage2_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo" "$(DEPDIR)/pre_stage2_exec-boot.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='pre_stage2_exec-boot.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c
-
-pre_stage2_exec-boot.obj: boot.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-boot.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-boot.Tpo" -c -o pre_stage2_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo" "$(DEPDIR)/pre_stage2_exec-boot.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='pre_stage2_exec-boot.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`
-
-pre_stage2_exec-builtins.o: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-builtins.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" -c -o pre_stage2_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" "$(DEPDIR)/pre_stage2_exec-builtins.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='pre_stage2_exec-builtins.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c
-
-pre_stage2_exec-builtins.obj: builtins.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-builtins.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" -c -o pre_stage2_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" "$(DEPDIR)/pre_stage2_exec-builtins.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='pre_stage2_exec-builtins.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`
-
-pre_stage2_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-char_io.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" -c -o pre_stage2_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" "$(DEPDIR)/pre_stage2_exec-char_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='pre_stage2_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-pre_stage2_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" -c -o pre_stage2_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" "$(DEPDIR)/pre_stage2_exec-char_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='pre_stage2_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-pre_stage2_exec-cmdline.o: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-cmdline.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" -c -o pre_stage2_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" "$(DEPDIR)/pre_stage2_exec-cmdline.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='pre_stage2_exec-cmdline.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c
-
-pre_stage2_exec-cmdline.obj: cmdline.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-cmdline.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" -c -o pre_stage2_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" "$(DEPDIR)/pre_stage2_exec-cmdline.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='pre_stage2_exec-cmdline.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`
-
-pre_stage2_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-common.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-common.Tpo" -c -o pre_stage2_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-common.Tpo" "$(DEPDIR)/pre_stage2_exec-common.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='pre_stage2_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-pre_stage2_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-common.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-common.Tpo" -c -o pre_stage2_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-common.Tpo" "$(DEPDIR)/pre_stage2_exec-common.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='pre_stage2_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-pre_stage2_exec-console.o: console.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-console.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-console.Tpo" -c -o pre_stage2_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-console.Tpo" "$(DEPDIR)/pre_stage2_exec-console.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-console.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='pre_stage2_exec-console.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c
-
-pre_stage2_exec-console.obj: console.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-console.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-console.Tpo" -c -o pre_stage2_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-console.Tpo" "$(DEPDIR)/pre_stage2_exec-console.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-console.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='pre_stage2_exec-console.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`
-
-pre_stage2_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" -c -o pre_stage2_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" "$(DEPDIR)/pre_stage2_exec-disk_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='pre_stage2_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-pre_stage2_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" -c -o pre_stage2_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" "$(DEPDIR)/pre_stage2_exec-disk_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='pre_stage2_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-pre_stage2_exec-fsys_ext2fs.o: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" -c -o pre_stage2_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='pre_stage2_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c
-
-pre_stage2_exec-fsys_ext2fs.obj: fsys_ext2fs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" -c -o pre_stage2_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='pre_stage2_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`
-
-pre_stage2_exec-fsys_fat.o: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" -c -o pre_stage2_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='pre_stage2_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c
-
-pre_stage2_exec-fsys_fat.obj: fsys_fat.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" -c -o pre_stage2_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='pre_stage2_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`
-
-pre_stage2_exec-fsys_ffs.o: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" -c -o pre_stage2_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='pre_stage2_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c
-
-pre_stage2_exec-fsys_ffs.obj: fsys_ffs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" -c -o pre_stage2_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='pre_stage2_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`
-
-pre_stage2_exec-fsys_iso9660.o: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" -c -o pre_stage2_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='pre_stage2_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c
-
-pre_stage2_exec-fsys_iso9660.obj: fsys_iso9660.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" -c -o pre_stage2_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='pre_stage2_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`
-
-pre_stage2_exec-fsys_jfs.o: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" -c -o pre_stage2_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='pre_stage2_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c
-
-pre_stage2_exec-fsys_jfs.obj: fsys_jfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" -c -o pre_stage2_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='pre_stage2_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`
-
-pre_stage2_exec-fsys_minix.o: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" -c -o pre_stage2_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='pre_stage2_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c
-
-pre_stage2_exec-fsys_minix.obj: fsys_minix.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" -c -o pre_stage2_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='pre_stage2_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`
-
-pre_stage2_exec-fsys_reiserfs.o: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" -c -o pre_stage2_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='pre_stage2_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c
-
-pre_stage2_exec-fsys_reiserfs.obj: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" -c -o pre_stage2_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='pre_stage2_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`
-
-pre_stage2_exec-fsys_ufs2.o: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" -c -o pre_stage2_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='pre_stage2_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c
-
-pre_stage2_exec-fsys_ufs2.obj: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" -c -o pre_stage2_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='pre_stage2_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`
-
-pre_stage2_exec-fsys_vstafs.o: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" -c -o pre_stage2_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='pre_stage2_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c
-
-pre_stage2_exec-fsys_vstafs.obj: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" -c -o pre_stage2_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='pre_stage2_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`
-
-pre_stage2_exec-fsys_xfs.o: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" -c -o pre_stage2_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='pre_stage2_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c
-
-pre_stage2_exec-fsys_xfs.obj: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" -c -o pre_stage2_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='pre_stage2_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`
-
-pre_stage2_exec-gunzip.o: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-gunzip.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" -c -o pre_stage2_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" "$(DEPDIR)/pre_stage2_exec-gunzip.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='pre_stage2_exec-gunzip.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c
-
-pre_stage2_exec-gunzip.obj: gunzip.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-gunzip.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" -c -o pre_stage2_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" "$(DEPDIR)/pre_stage2_exec-gunzip.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='pre_stage2_exec-gunzip.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`
-
-pre_stage2_exec-hercules.o: hercules.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-hercules.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" -c -o pre_stage2_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" "$(DEPDIR)/pre_stage2_exec-hercules.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='pre_stage2_exec-hercules.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c
-
-pre_stage2_exec-hercules.obj: hercules.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-hercules.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" -c -o pre_stage2_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" "$(DEPDIR)/pre_stage2_exec-hercules.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='pre_stage2_exec-hercules.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`
-
-pre_stage2_exec-md5.o: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-md5.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-md5.Tpo" -c -o pre_stage2_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo" "$(DEPDIR)/pre_stage2_exec-md5.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='pre_stage2_exec-md5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
-
-pre_stage2_exec-md5.obj: md5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-md5.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-md5.Tpo" -c -o pre_stage2_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo" "$(DEPDIR)/pre_stage2_exec-md5.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='pre_stage2_exec-md5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
-
-pre_stage2_exec-serial.o: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-serial.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-serial.Tpo" -c -o pre_stage2_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo" "$(DEPDIR)/pre_stage2_exec-serial.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='pre_stage2_exec-serial.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c
-
-pre_stage2_exec-serial.obj: serial.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-serial.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-serial.Tpo" -c -o pre_stage2_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo" "$(DEPDIR)/pre_stage2_exec-serial.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='pre_stage2_exec-serial.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`
-
-pre_stage2_exec-smp-imps.o: smp-imps.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-smp-imps.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" -c -o pre_stage2_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" "$(DEPDIR)/pre_stage2_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='pre_stage2_exec-smp-imps.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c
-
-pre_stage2_exec-smp-imps.obj: smp-imps.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-smp-imps.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" -c -o pre_stage2_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" "$(DEPDIR)/pre_stage2_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='pre_stage2_exec-smp-imps.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`
-
-pre_stage2_exec-stage2.o: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-stage2.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" -c -o pre_stage2_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" "$(DEPDIR)/pre_stage2_exec-stage2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='pre_stage2_exec-stage2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c
-
-pre_stage2_exec-stage2.obj: stage2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-stage2.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" -c -o pre_stage2_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" "$(DEPDIR)/pre_stage2_exec-stage2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='pre_stage2_exec-stage2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`
-
-pre_stage2_exec-terminfo.o: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-terminfo.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" -c -o pre_stage2_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" "$(DEPDIR)/pre_stage2_exec-terminfo.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='pre_stage2_exec-terminfo.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c
-
-pre_stage2_exec-terminfo.obj: terminfo.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-terminfo.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" -c -o pre_stage2_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" "$(DEPDIR)/pre_stage2_exec-terminfo.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='pre_stage2_exec-terminfo.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`
-
-pre_stage2_exec-tparm.o: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-tparm.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" -c -o pre_stage2_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" "$(DEPDIR)/pre_stage2_exec-tparm.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='pre_stage2_exec-tparm.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c
-
-pre_stage2_exec-tparm.obj: tparm.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-tparm.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" "$(DEPDIR)/pre_stage2_exec-tparm.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='pre_stage2_exec-tparm.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-reiserfs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='reiserfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-reiserfs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='reiserfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-reiserfs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" -c -o reiserfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='reiserfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-reiserfs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" -c -o reiserfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='reiserfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-reiserfs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" -c -o reiserfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='reiserfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-reiserfs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" -c -o reiserfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='reiserfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-reiserfs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" -c -o reiserfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='reiserfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-reiserfs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" -c -o reiserfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='reiserfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-reiserfs_stage1_5_exec-fsys_reiserfs.o: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" -c -o reiserfs_stage1_5_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='reiserfs_stage1_5_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c
-
-reiserfs_stage1_5_exec-fsys_reiserfs.obj: fsys_reiserfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" -c -o reiserfs_stage1_5_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='reiserfs_stage1_5_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`
-
-reiserfs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" -c -o reiserfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='reiserfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-reiserfs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" -c -o reiserfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='reiserfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-ufs2_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" -c -o ufs2_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ufs2_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-ufs2_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" -c -o ufs2_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ufs2_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-ufs2_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" -c -o ufs2_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ufs2_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-ufs2_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" -c -o ufs2_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ufs2_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-ufs2_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" -c -o ufs2_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ufs2_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-ufs2_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" -c -o ufs2_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ufs2_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-ufs2_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" -c -o ufs2_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ufs2_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-ufs2_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" -c -o ufs2_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ufs2_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-ufs2_stage1_5_exec-fsys_ufs2.o: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" -c -o ufs2_stage1_5_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='ufs2_stage1_5_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c
-
-ufs2_stage1_5_exec-fsys_ufs2.obj: fsys_ufs2.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" -c -o ufs2_stage1_5_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='ufs2_stage1_5_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`
-
-ufs2_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" -c -o ufs2_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ufs2_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-ufs2_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" -c -o ufs2_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ufs2_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-vstafs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" -c -o vstafs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='vstafs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-vstafs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" -c -o vstafs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='vstafs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-vstafs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" -c -o vstafs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='vstafs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-vstafs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" -c -o vstafs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='vstafs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-vstafs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" -c -o vstafs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='vstafs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-vstafs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" -c -o vstafs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='vstafs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-vstafs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" -c -o vstafs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='vstafs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-vstafs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" -c -o vstafs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='vstafs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-vstafs_stage1_5_exec-fsys_vstafs.o: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" -c -o vstafs_stage1_5_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='vstafs_stage1_5_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c
-
-vstafs_stage1_5_exec-fsys_vstafs.obj: fsys_vstafs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" -c -o vstafs_stage1_5_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='vstafs_stage1_5_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`
-
-vstafs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" -c -o vstafs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='vstafs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-vstafs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" -c -o vstafs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='vstafs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-
-xfs_stage1_5_exec-common.o: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" -c -o xfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='xfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c
-
-xfs_stage1_5_exec-common.obj: common.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" -c -o xfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='xfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`
-
-xfs_stage1_5_exec-char_io.o: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" -c -o xfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='xfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c
-
-xfs_stage1_5_exec-char_io.obj: char_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" -c -o xfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='xfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`
-
-xfs_stage1_5_exec-disk_io.o: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" -c -o xfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='xfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c
-
-xfs_stage1_5_exec-disk_io.obj: disk_io.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" -c -o xfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='xfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`
-
-xfs_stage1_5_exec-stage1_5.o: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" -c -o xfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='xfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c
-
-xfs_stage1_5_exec-stage1_5.obj: stage1_5.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" -c -o xfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='xfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`
-
-xfs_stage1_5_exec-fsys_xfs.o: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" -c -o xfs_stage1_5_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='xfs_stage1_5_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c
-
-xfs_stage1_5_exec-fsys_xfs.obj: fsys_xfs.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" -c -o xfs_stage1_5_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='xfs_stage1_5_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`
-
-xfs_stage1_5_exec-bios.o: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" -c -o xfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='xfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c
-
-xfs_stage1_5_exec-bios.obj: bios.c
-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" -c -o xfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='xfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`
-uninstall-info-am:
-install-pkglibDATA: $(pkglib_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
- @list='$(pkglib_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
- $(pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
- done
-
-uninstall-pkglibDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkglib_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list='$(TESTS)'; \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- echo "XPASS: $$tst"; \
- ;; \
- *) \
- echo "PASS: $$tst"; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xfail=`expr $$xfail + 1`; \
- echo "XFAIL: $$tst"; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- echo "FAIL: $$tst"; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- echo "SKIP: $$tst"; \
- fi; \
- done; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="All $$all tests passed"; \
- else \
- banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all tests failed"; \
- else \
- banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
- fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- skipped="($$skip tests were not run)"; \
- test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- test -z "$$skipped" || echo "$$skipped"; \
- test -z "$$report" || echo "$$report"; \
- echo "$$dashes"; \
- test "$$failed" -eq 0; \
- else :; fi
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) check-am
-all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
- $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(pkglibdir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES clean-noinstPROGRAMS \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-pkglibDATA
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-pkglibDATA
-
-.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
- clean-generic clean-noinstLIBRARIES clean-noinstPROGRAMS ctags \
- distclean distclean-compile distclean-generic distclean-tags \
- distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-pkglibDATA install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
- ps ps-am tags uninstall uninstall-am uninstall-info-am \
- uninstall-pkglibDATA
-
-
-stage2_size.h: pre_stage2
- -rm -f stage2_size.h
- set dummy `ls -l pre_stage2`; \
- echo "#define STAGE2_SIZE $$6" > stage2_size.h
-
-# XXX: automake doesn't provide a way to specify dependencies for object
-# files explicitly, so we must write this by a general Makefile scheme.
-# If automake change the naming scheme for per-executable objects, this
-# will be broken.
-start_exec-start.$(OBJEXT): stage2_size.h
-
-stage2: pre_stage2 start
- -rm -f stage2
- cat start pre_stage2 > stage2
-
-start_eltorito_exec-start.$(OBJEXT): stage2_size.h
-
-stage2_eltorito: pre_stage2 start_eltorito
- -rm -f stage2_eltorito
- cat start_eltorito pre_stage2 > stage2_eltorito
-
-diskless_size.h: diskless
- -rm -f $@
- set dummy `ls -l $^`; \
- echo "#define DISKLESS_SIZE $$6" > $@
-
-# XXX: See the comment for start_exec-start.o.
-nbloader_exec-nbloader.$(OBJEXT): diskless_size.h
-
-# For nbgrub target.
-nbgrub: nbloader diskless
- -rm -f $@
- cat $^ > $@
-
-# XXX: See the comment for start_exec-start.o.
-pxeloader_exec-pxeloader.$(OBJEXT): diskless_size.h
-
-# For pxegrub target.
-pxegrub: pxeloader diskless
- -rm -f $@
- cat $^ > $@
-.exec:
- $(OBJCOPY) -O binary $< $@
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-SOURCES = $(mbchk_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = mbchk$(EXEEXT)
-subdir = util
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/grub-image.in $(srcdir)/grub-install.in \
- $(srcdir)/grub-md5-crypt.in $(srcdir)/grub-set-default.in \
- $(srcdir)/grub-terminfo.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = grub-image grub-install grub-md5-crypt \
- grub-terminfo grub-set-default
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am_mbchk_OBJECTS = mbchk.$(OBJEXT)
-mbchk_OBJECTS = $(am_mbchk_OBJECTS)
-mbchk_DEPENDENCIES = ../lib/libcommon.a
-sbinSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-SCRIPTS = $(noinst_SCRIPTS) $(sbin_SCRIPTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(mbchk_SOURCES)
-DIST_SOURCES = $(mbchk_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@
-BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@
-DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FSYS_CFLAGS = @FSYS_CFLAGS@
-GRUB_CFLAGS = @GRUB_CFLAGS@
-GRUB_LIBS = @GRUB_LIBS@
-HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-NETBOOT_DRIVERS = @NETBOOT_DRIVERS@
-NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@
-NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@
-NET_CFLAGS = @NET_CFLAGS@
-NET_EXTRAFLAGS = @NET_EXTRAFLAGS@
-OBJCOPY = @OBJCOPY@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RANLIB = @RANLIB@
-SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@
-SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@
-SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@
-SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STAGE1_CFLAGS = @STAGE1_CFLAGS@
-STAGE2_CFLAGS = @STAGE2_CFLAGS@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_OBJCOPY = @ac_ct_OBJCOPY@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-sbin_SCRIPTS = grub-install grub-md5-crypt grub-terminfo \
- grub-set-default
-
-noinst_SCRIPTS = grub-image mkbimage
-EXTRA_DIST = mkbimage
-
-# XXX: Need to search for a header file in docs, because of multiboot.h.
-AM_CFLAGS = -I$(top_srcdir)/lib -I$(top_srcdir)/docs
-mbchk_SOURCES = mbchk.c
-mbchk_LDADD = ../lib/libcommon.a
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu util/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu util/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-grub-image: $(top_builddir)/config.status $(srcdir)/grub-image.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-grub-install: $(top_builddir)/config.status $(srcdir)/grub-install.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-grub-md5-crypt: $(top_builddir)/config.status $(srcdir)/grub-md5-crypt.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-grub-terminfo: $(top_builddir)/config.status $(srcdir)/grub-terminfo.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-grub-set-default: $(top_builddir)/config.status $(srcdir)/grub-set-default.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-mbchk$(EXEEXT): $(mbchk_OBJECTS) $(mbchk_DEPENDENCIES)
- @rm -f mbchk$(EXEEXT)
- $(LINK) $(mbchk_LDFLAGS) $(mbchk_OBJECTS) $(mbchk_LDADD) $(LIBS)
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)"
- @list='$(sbin_SCRIPTS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f $$d$$p; then \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " $(sbinSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
- $(sbinSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(sbindir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
- rm -f "$(DESTDIR)$(sbindir)/$$f"; \
- done
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mbchk.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(SCRIPTS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS install-sbinSCRIPTS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am \
- uninstall-sbinSCRIPTS
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-sbinSCRIPTS \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-info-am uninstall-sbinSCRIPTS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
projects / thirdparty / grub.git / commitdiff
