arm64: dts: rockchip: Add HDMI and VOP support for Khadas Edge 2L

Enable the Video Output Processor (VOP) and the HDMI TX controller
to support HDMI display output on the Khadas Edge 2L. Also, enable
the associated HDMI PHY.

Signed-off-by: Gray Huang <gray.huang@wesion.com>
Link: https://patch.msgid.link/20260325054614.1497147-5-gray.huang@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
index 59e5e7e25beeb37cb0da48b851c97b49b3264a17..c39c7f90b6fbafd90e2a34aec44114c3f79b67d9 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3576.dtsi"
 
 / {
@@ -18,6 +19,17 @@
                stdout-path = "serial0:1500000n8";
        };
 
+       hdmi-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        vcc_sys: regulator-vcc5v0-sys {
                compatible = "regulator-fixed";
                regulator-name = "vcc_sys";
@@ -61,6 +73,30 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_in {
+       hdmi_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi>;
+       };
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&hdmi_sound {
+       status = "okay";
+};
+
+&hdptxphy {
+       status = "okay";
+};
+
 &i2c1 {
        status = "okay";
 
@@ -447,3 +483,18 @@
 &uart0 {
        status = "okay";
 };
+
+&vop {
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi_in_vp0>;
+       };
+};