During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address:
0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
{
struct idpf_netdev_priv *np = netdev_priv(vport->netdev);
struct idpf_adapter *adapter = vport->adapter;
- struct idpf_vport_config *vport_config;
- struct idpf_rss_data *rss_data;
int err;
if (test_bit(IDPF_VPORT_UP, np->state))
idpf_restore_features(vport);
- vport_config = adapter->vport_config[vport->idx];
- rss_data = &vport_config->user_config.rss_data;
-
- if (!rss_data->rss_lut) {
- err = idpf_init_rss_lut(vport);
- if (err) {
- dev_err(&adapter->pdev->dev,
- "Failed to initialize RSS LUT for vport %u: %d\n",
- vport->vport_id, err);
- goto disable_vport;
- }
- }
-
err = idpf_config_rss(vport);
if (err) {
dev_err(&adapter->pdev->dev, "Failed to configure RSS for vport %u: %d\n",
idpf_vport_stop(vport, false);
}
- idpf_deinit_rss_lut(vport);
/* We're passing in vport here because we need its wait_queue
* to send a message and it should be getting all the vport
* config data out of the adapter but we need to be careful not
if (err)
goto err_open;
+ if (reset_cause == IDPF_SR_Q_CHANGE &&
+ !netif_is_rxfh_configured(vport->netdev))
+ idpf_fill_dflt_rss_lut(vport);
+
if (vport_is_up)
err = idpf_vport_open(vport, false);
* idpf_fill_dflt_rss_lut - Fill the indirection table with the default values
* @vport: virtual port structure
*/
-static void idpf_fill_dflt_rss_lut(struct idpf_vport *vport)
+void idpf_fill_dflt_rss_lut(struct idpf_vport *vport)
{
struct idpf_adapter *adapter = vport->adapter;
u16 num_active_rxq = vport->num_rxq;
void idpf_vport_intr_deinit(struct idpf_vport *vport);
int idpf_vport_intr_init(struct idpf_vport *vport);
void idpf_vport_intr_ena(struct idpf_vport *vport);
+void idpf_fill_dflt_rss_lut(struct idpf_vport *vport);
int idpf_config_rss(struct idpf_vport *vport);
int idpf_init_rss_lut(struct idpf_vport *vport);
void idpf_deinit_rss_lut(struct idpf_vport *vport);