o2lo="s/\\.${objext}\$/.lo/"
# Parse our command line options once, thoroughly.
-while test $# -gt 0
+while test "$#" -gt 0
do
arg="$1"
shift
command="$base_compile $srcfile"
fi
- if test ! -d ${xdir}$objdir; then
+ if test ! -d "${xdir}$objdir"; then
$show "$mkdir ${xdir}$objdir"
$run $mkdir ${xdir}$objdir
status=$?
- if test $status -ne 0 && test ! -d ${xdir}$objdir; then
+ if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
exit $status
fi
fi
fi
if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
fi
if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
- while test $# -gt 0; do
+ while test "$#" -gt 0; do
arg="$1"
base_compile="$base_compile $arg"
shift
continue
;;
esac
- fi # test -n $prev
+ fi # test -n "$prev"
prevarg="$arg"
output_objdir="$output_objdir/$objdir"
fi
# Create the object directory.
- if test ! -d $output_objdir; then
+ if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
+ if test "$status" -ne 0 && test ! -d "$output_objdir"; then
exit $status
fi
fi
libs="$libs $deplib"
done
- if test $linkmode = lib; then
+ if test "$linkmode" = lib; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
libs="$deplibs"
deplibs=
fi
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
- if test $pass = dlopen; then
+ if test "$pass" = dlopen; then
# Collect dlpreopened libraries
save_deplibs="$deplibs"
deplibs=
found=no
case $deplib in
-l*)
- if test $linkmode != lib && test $linkmode != prog; then
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test $pass = conv && continue
+ test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
;;
prog)
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
- if test $pass = scan; then
+ if test "$pass" = scan; then
deplibs="$deplib $deplibs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
else
continue
;; # -L
-R*)
- if test $pass = link; then
+ if test "$pass" = link; then
dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
;;
*.la) lib="$deplib" ;;
*.$libext)
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
continue
;;
prog)
- if test $pass != link; then
+ if test "$pass" != link; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
- elif test $linkmode = prog; then
- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
newdlprefiles="$newdlprefiles $deplib"
continue
;;
esac # case $deplib
- if test $found = yes || test -f "$lib"; then :
+ if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib'" 1>&2
exit 1
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
- { test $linkmode != prog && test $linkmode != lib; }; then
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
- if test $pass = conv; then
+ if test "$pass" = conv; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
esac
tmp_libs="$tmp_libs $deplib"
done
- elif test $linkmode != prog && test $linkmode != lib; then
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
$echo "$modename: \`$lib' is not a convenience library" 1>&2
exit 1
fi
fi
# This library was specified with -dlopen.
- if test $pass = dlopen; then
+ if test "$pass" = dlopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
exit 1
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
# This library was specified with -dlpreopen.
- if test $pass = dlpreopen; then
+ if test "$pass" = dlpreopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
exit 1
if test -z "$libdir"; then
# Link the convenience library
- if test $linkmode = lib; then
+ if test "$linkmode" = lib; then
deplibs="$dir/$old_library $deplibs"
elif test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
continue
fi
- if test $linkmode = prog && test $pass != link; then
+ if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
esac
# Need to link against all dependency_libs?
- if test $linkalldeplibs = yes; then
+ if test "$linkalldeplibs" = yes; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
need_relink=yes
fi
# This is a shared library
- if test $linkmode = lib &&
- test $hardcode_into_libs = yes; then
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
- fi # test -n $old_archive_from_expsyms_cmds
+ fi # test -n "$old_archive_from_expsyms_cmds"
- if test $linkmode = prog || test "$mode" != relink; then
+ if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
add_dir=
add=
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
fi
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
fi
fi
- if test $linkmode = prog || test "$mode" = relink; then
+ if test "$linkmode" = prog || test "$mode" = relink; then
add_shlibpath=
add_dir=
add=
add="-l$name"
fi
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test $linkmode = prog; then
+ elif test "$linkmode" = prog; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
fi
fi # link shared/static library?
- if test $linkmode = lib; then
+ if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
- { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
- test $link_static = yes; }; then
+ { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
tmp_libs="$tmp_libs $deplib"
done
- if test $link_all_deplibs != no; then
+ if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
case $deplib in
fi # linkmode = lib
done # for deplib in $libs
dependency_libs="$newdependency_libs"
- if test $pass = dlpreopen; then
+ if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test $pass != dlopen; then
- if test $pass != conv; then
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
done # for var
fi
done # for pass
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
dlprefiles="$newdlprefiles"
fi
fi
set dummy $rpath
- if test $# -gt 2; then
+ if test "$#" -gt 2; then
$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
fi
install_libdir="$2"
;;
esac
- if test $age -gt $current; then
+ if test "$age" -gt "$current"; then
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit 1
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test $loop != 0; do
+ while test "$loop" -ne 0; do
iface=`expr $revision - $loop`
loop=`expr $loop - 1`
verstring="sgi$major.$iface:$verstring"
# Add in all the interfaces that we are compatible with.
loop=$age
- while test $loop != 0; do
+ while test "$loop" -ne 0; do
iface=`expr $current - $loop`
loop=`expr $loop - 1`
verstring="$verstring:${iface}.0"
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test $build_libtool_need_lc = "yes"; then
+ if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
fi
;;
EOF
$rm conftest
$LTCC -o conftest conftest.c $deplibs
- if test $? -eq 0 ; then
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name="`expr $i : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" -a "$name" != "0"; then
+ if test "$name" != "" -a "$name" -ne "0"; then
libname=`eval \\$echo \"$libname_spec\"`
deplib_matches=`eval \\$echo \"$library_names_spec\"`
set dummy $deplib_matches
$rm conftest
$LTCC -o conftest conftest.c $i
# Did it work?
- if test $? -eq 0 ; then
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
libname=`eval \\$echo \"$libname_spec\"`
deplib_matches=`eval \\$echo \"$library_names_spec\"`
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test $allow_undefined = no; then
+ if test "$allow_undefined" = no; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
- if test $hardcode_into_libs = yes; then
+ if test "$hardcode_into_libs" = yes; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
else
soname="$realname"
fi
- if test x$dlname = x; then
+ if test -z "$dlname"; then
dlname=$soname
fi
$show "$mkdir $gentop"
$run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
$show "$mkdir $xdir"
$run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
fi
if len=`expr "X$cmds" : ".*"` &&
- test $len -le $max_cmd_len || test $max_cmd_len -le -1; then
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise.
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
{ len=`expr "X$test_cmds" : ".*"` &&
- test $len -le $max_cmd_len; }; then
+ test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test $k -eq 1 ; then
+ if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
else
# Set up a command to remove the reloadale object files
# after they are used.
i=0
- while test $i -lt $k
+ while test "$i" -lt "$k"
do
i=`expr $i + 1`
delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
$show "$mkdir $gentop"
$run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
$show "$mkdir $xdir"
$run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
- if test $need_relink = no || test "$build_libtool_libs" != yes; then
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
$show "$mkdir $gentop"
$run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
$show "$mkdir $xdir"
$run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
- test $len -le $max_cmd_len || test $max_cmd_len -le -1; then
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# the command line is too long to link in one step, link in parts
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
if len=`expr "X$test_cmds" : ".*"` &&
- test $len -le $max_cmd_len; then
+ test "$len" -le "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test $need_relink = yes; then
+ if test "$installed" = no && test "$need_relink" = yes; then
$echo >> $output "\
relink_command=\"$relink_command\""
fi
# Not a directory, so check to see that there is only one file specified.
set dummy $files
- if test $# -gt 2; then
+ if test "$#" -gt 2; then
$echo "$modename: \`$dest' is not a directory" 1>&2
$echo "$help" 1>&2
exit 1
$run eval "$striplib $destdir/$realname" || exit $?
fi
- if test $# -gt 0; then
+ if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
for linkname
do
objdir="$dir/$objdir"
fi
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test $mode = uninstall && objdir="$dir"
+ test "$mode" = uninstall && objdir="$dir"
# Remember objdir for removal later, being careful to avoid duplicates
- if test $mode = clean; then
+ if test "$mode" = clean; then
case " $rmdirs " in
*" $objdir "*) ;;
*) rmdirs="$rmdirs $objdir" ;;
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test $mode = uninstall; then
+ if test "$mode" = uninstall; then
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
eval cmds=\"$postuninstall_cmds\"
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd"
- if test $? != 0 && test "$rmforce" != yes; then
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd"
- if test $? != 0 && test "$rmforce" != yes; then
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
*)
# Do a test to see if this is a libtool program.
- if test $mode = clean &&
+ if test "$mode" = clean &&
(sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
relink_command=
. $dir/$file
projects / thirdparty / libtool.git / commitdiff
