arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe

Enable i.MX95 pinctrl driver necessary for booting. Also enable the
missing drivers required for Ethernet and PCIe functionality. These
drivers are used on i.MX95 boards, including the NXP i.MX95 19x19 EVK.

The below configurations were enabled (listed with their DT nodes on
imx95.dtsi):

* CONFIG_PINCTRL_IMX_SCMI for the `scmi_iomuxc` pinctrl.
* CONFIG_CLK_IMX95_BLK_CTL for the HSIO domain clock controller
  (`hsio_blk_ctl`) used by the PCIe controller.
* CONFIG_NXP_NETC_BLK_CTRL for the NETC hardware domain controller
  (`netc_blk_ctrl`).
* CONFIG_NXP_ENETC4 for the Ethernet controller (`enetc_port*`).

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e3a2d37bd10423b028f59dc40d6e8ee1c610d6b8..787d3ae3f5afeac486a905e0943e7b0e1dcee3a9 100644 (file)
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -354,8 +354,10 @@ CONFIG_FSL_FMAN=y
 CONFIG_FSL_DPAA_ETH=y
 CONFIG_FSL_DPAA2_ETH=y
 CONFIG_FSL_ENETC=y
+CONFIG_NXP_ENETC4=m
 CONFIG_FSL_ENETC_VF=y
 CONFIG_FSL_ENETC_QOS=y
+CONFIG_NXP_NETC_BLK_CTRL=m
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
@@ -615,6 +617,7 @@ CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
 CONFIG_PINCTRL_IMX91=y
 CONFIG_PINCTRL_IMX93=y
+CONFIG_PINCTRL_IMX_SCMI=y
 CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
@@ -1349,6 +1352,7 @@ CONFIG_CLK_IMX8MQ=y
 CONFIG_CLK_IMX8QXP=y
 CONFIG_CLK_IMX8ULP=y
 CONFIG_CLK_IMX93=y
+CONFIG_CLK_IMX95_BLK_CTL=y
 CONFIG_TI_SCI_CLK=y
 CONFIG_COMMON_CLK_MT8192_AUDSYS=y
 CONFIG_COMMON_CLK_MT8192_CAMSYS=y