--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+#include "qcs6490-audioreach.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &remoteproc_wpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wifi;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wlan_fw_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+ model = "Radxa Dragon Q6A";
+ compatible = "radxa,dragon-q6a", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
+ serial0 = &uart5;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9380-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ qcom,hphl-jack-type-normally-closed;
+
+ #sound-dai-cells = <1>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb2_1_con: connector-0 {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vcc_5v_peri>;
+
+ port {
+ usb2_1_connector: endpoint {
+ remote-endpoint = <&usb_hub_2_1>;
+ };
+ };
+ };
+
+ usb2_2_con: connector-1 {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vcc_5v_peri>;
+
+ port {
+ usb2_2_connector: endpoint {
+ remote-endpoint = <&usb_hub_2_2>;
+ };
+ };
+ };
+
+ usb2_3_con: connector-2 {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vcc_5v_peri>;
+
+ port {
+ usb2_3_connector: endpoint {
+ remote-endpoint = <&usb_hub_2_3>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&user_led>;
+ pinctrl-names = "default";
+
+ user-led {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@80700000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@84300000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@84800000 {
+ reg = <0x0 0x84800000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@87000000 {
+ reg = <0x0 0x87000000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ video_mem: video@88e00000 {
+ reg = <0x0 0x88e00000 0x0 0x700000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@89500000 {
+ reg = <0x0 0x89500000 0x0 0x500000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@89a00000 {
+ reg = <0x0 0x89a00000 0x0 0x2000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@d0600000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+ };
+
+ thermal-zones {
+ msm-skin-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 2>;
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+ };
+
+ ufs-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+ };
+ };
+
+ vcc_1v8: regulator-vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_5v_peri>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5v_peri>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_5v_peri: regulator-vcc-5v-peri {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v_peri";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vph_pwr>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>;
+ vdd-l2-l7-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>;
+
+ vreg_s1b_1p84: smps1 {
+ regulator-name = "vreg_s1b_1p84";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p536: smps7 {
+ regulator-name = "vreg_s7b_0p536";
+ regulator-min-microvolt = <536000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p2: smps8 {
+ regulator-name = "vreg_s8b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1496000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p8: ldo17 {
+ regulator-name = "vreg_l17b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1b_1p84>;
+ vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+ vdd-l10-supply = <&vreg_s7b_0p536>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1976000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-name = "vreg_bob_3p296";
+ regulator-min-microvolt = <3032000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcs6490/a660_zap.mbn";
+};
+
+/* Pin 13, 15 in GPIO header */
+&i2c0 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+/* Pin 27, 28 in GPIO header */
+&i2c2 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+/* Pin 3, 5 in GPIO header */
+&i2c6 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+&i2c10 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+
+ rtc: rtc@68 {
+ compatible = "st,m41t11";
+ reg = <0x68>;
+ };
+};
+
+/* External touchscreen */
+&i2c13 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+&lpass_audiocc {
+ compatible = "qcom,qcm6490-lpassaudiocc";
+ /delete-property/ power-domains;
+};
+
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
+ pinctrl-names = "default";
+
+ /* Support for QPS615 PCIe switch */
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>,
+ <0x208 &apps_smmu 0x1c84 0x1>,
+ <0x210 &apps_smmu 0x1c85 0x1>,
+ <0x218 &apps_smmu 0x1c86 0x1>,
+ <0x300 &apps_smmu 0x1c87 0x1>,
+ <0x400 &apps_smmu 0x1c88 0x1>,
+ <0x500 &apps_smmu 0x1c89 0x1>,
+ <0x501 &apps_smmu 0x1c90 0x1>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pm7325_gpios {
+ pm7325_adc_default: adc-default-state {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+};
+
+&pm7325_temp_alarm {
+ io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+ io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ msm-skin-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ ufs-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_vadc {
+ pinctrl-0 = <&pm7325_adc_default>;
+ pinctrl-names = "default";
+
+ channel@3 {
+ reg = <PMK8350_ADC7_DIE_TEMP>;
+ label = "pmk7325_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ label = "xo_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@103 {
+ reg = <PM7325_ADC7_DIE_TEMP>;
+ label = "pm7325_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@144 {
+ reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "quiet_therm";
+ };
+
+ channel@146 {
+ reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "msm_skin_therm";
+ };
+
+ channel@14a {
+ /* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */
+ reg = <PM7325_ADC7_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "ufs_therm";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&qspi {
+ /* It's not possible to use QSPI with iommu */
+ /* due to an error in qcom_smmu_write_s2cr */
+ /delete-property/ iommus;
+
+ pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>,
+ <&qspi_data1>, <&qspi_data23>;
+ pinctrl-1 = <&qspi_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+
+ spi_flash: flash@0 {
+ compatible = "winbond,w25q256", "jedec,spi-nor";
+ reg = <0>;
+
+ spi-max-frequency = <104000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/qcm6490/qupv3fw.elf";
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/qcm6490/qupv3fw.elf";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs6490/cdsp.mbn";
+ status = "okay";
+};
+
+&sdhc_1 {
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ vmmc-supply = <&vreg_l7b_2p96>;
+ vqmmc-supply = <&vreg_l19b_1p8>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+ pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+ vmmc-supply = <&vreg_l9c_2p96>;
+ vqmmc-supply = <&vreg_l6c_2p96>;
+
+ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sound {
+ compatible = "qcom,qcs6490-rb3gen2-sndcard";
+ model = "QCS6490-Radxa-Dragon-Q6A";
+
+ audio-routing = "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "TX SWR_ADC1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+};
+
+/* Pin 11, 29, 31, 32 in GPIO header */
+&spi7 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+/* Pin 19, 21, 23, 24, 26 in GPIO header */
+&spi12 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+/* Pin 22, 33, 36, 37 in GPIO header */
+&spi14 {
+ qcom,enable-gsi-dma;
+ status = "okay";
+};
+
+&swr0 {
+ status = "okay";
+
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <1 1 2 3>;
+ };
+};
+
+&tlmm {
+ gpio-line-names =
+ /* GPIO_0 ~ GPIO_3 */
+ "PIN_13", "PIN_15", "", "",
+ /* GPIO_4 ~ GPIO_7 */
+ "", "", "", "",
+ /* GPIO_8 ~ GPIO_11 */
+ "PIN_27", "PIN_28", "", "",
+ /* GPIO_12 ~ GPIO_15 */
+ "", "", "", "",
+ /* GPIO_16 ~ GPIO_19 */
+ "", "", "", "",
+ /* GPIO_20 ~ GPIO_23 */
+ "", "", "PIN_8", "PIN_10",
+ /* GPIO_24 ~ GPIO_27 */
+ "PIN_3", "PIN_5", "PIN_16", "PIN_27",
+ /* GPIO_28 ~ GPIO_31 */
+ "PIN_31", "PIN_11", "PIN_32", "PIN_29",
+ /* GPIO_32 ~ GPIO_35 */
+ "", "", "", "",
+ /* GPIO_36 ~ GPIO_39 */
+ "", "", "", "",
+ /* GPIO_40 ~ GPIO_43 */
+ "", "", "", "",
+ /* GPIO_44 ~ GPIO_47 */
+ "", "", "", "",
+ /* GPIO_48 ~ GPIO_51 */
+ "PIN_21", "PIN_19", "PIN_23", "PIN_24",
+ /* GPIO_52 ~ GPIO_55 */
+ "", "", "", "PIN_26",
+ /* GPIO_56 ~ GPIO_59 */
+ "PIN_33", "PIN_22", "PIN_37", "PIN_36",
+ /* GPIO_60 ~ GPIO_63 */
+ "", "", "", "",
+ /* GPIO_64 ~ GPIO_67 */
+ "", "", "", "",
+ /* GPIO_68 ~ GPIO_71 */
+ "", "", "", "",
+ /* GPIO_72 ~ GPIO_75 */
+ "", "", "", "",
+ /* GPIO_76 ~ GPIO_79 */
+ "", "", "", "",
+ /* GPIO_80 ~ GPIO_83 */
+ "", "", "", "",
+ /* GPIO_84 ~ GPIO_87 */
+ "", "", "", "",
+ /* GPIO_88 ~ GPIO_91 */
+ "", "", "", "",
+ /* GPIO_92 ~ GPIO_95 */
+ "", "", "", "",
+ /* GPIO_96 ~ GPIO_99 */
+ "PIN_7", "PIN_12", "PIN_38", "PIN_40",
+ /* GPIO_100 ~ GPIO_103 */
+ "PIN_35", "", "", "",
+ /* GPIO_104 ~ GPIO_107 */
+ "", "", "", "",
+ /* GPIO_108 ~ GPIO_111 */
+ "", "", "", "",
+ /* GPIO_112 ~ GPIO_115 */
+ "", "", "", "",
+ /* GPIO_116 ~ GPIO_119 */
+ "", "", "", "",
+ /* GPIO_120 ~ GPIO_123 */
+ "", "", "", "",
+ /* GPIO_124 ~ GPIO_127 */
+ "", "", "", "",
+ /* GPIO_128 ~ GPIO_131 */
+ "", "", "", "",
+ /* GPIO_132 ~ GPIO_135 */
+ "", "", "", "",
+ /* GPIO_136 ~ GPIO_139 */
+ "", "", "", "",
+ /* GPIO_140 ~ GPIO_143 */
+ "", "", "", "",
+ /* GPIO_144 ~ GPIO_147 */
+ "", "", "", "",
+ /* GPIO_148 ~ GPIO_151 */
+ "", "", "", "",
+ /* GPIO_152 ~ GPIO_155 */
+ "", "", "", "",
+ /* GPIO_156 ~ GPIO_159 */
+ "", "", "", "",
+ /* GPIO_160 ~ GPIO_163 */
+ "", "", "", "",
+ /* GPIO_164 ~ GPIO_167 */
+ "", "", "", "",
+ /* GPIO_168 ~ GPIO_171 */
+ "", "", "", "",
+ /* GPIO_172 ~ GPIO_174 */
+ "", "", "";
+
+ pcie0_reset_n: pcie0-reset-n-state {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie0_wake_n: pcie0-wake-n-state {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie1_reset_n: pcie1-reset-n-state {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_wake_n: pcie1-wake-n-state {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qspi_sleep: qspi-sleep-state {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17";
+ function = "gpio";
+ output-disable;
+ };
+
+ sd_cd: sd-cd-state {
+ pins = "gpio91";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ user_led: user-led-state {
+ pins = "gpio42";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usb_2 {
+ dr_mode = "host";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ /* Onboard USB 2.0 hub */
+ usb_hub_2_x: hub@1 {
+ compatible = "usb1a40,0101";
+ reg = <1>;
+ vdd-supply = <&vcc_5v_peri>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ usb_hub_2_1: endpoint {
+ remote-endpoint = <&usb2_1_connector>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_hub_2_2: endpoint {
+ remote-endpoint = <&usb2_2_connector>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ usb_hub_2_3: endpoint {
+ remote-endpoint = <&usb2_3_connector>;
+ };
+ };
+ };
+
+ /* FCU760K Wi-Fi & Bluetooth module */
+ wifi@4 {
+ compatible = "usba69c,8d80";
+ reg = <4>;
+ };
+ };
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&venus {
+ status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&pcie0_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
+&pcie1_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
+&qspi_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&qspi_cs0 {
+ bias-disable;
+ drive-strength = <8>;
+};
+
+&qspi_data0 {
+ bias-disable;
+ drive-strength = <8>;
+};
+
+&qspi_data1 {
+ bias-disable;
+ drive-strength = <8>;
+};
+
+&qspi_data23 {
+ bias-disable;
+ drive-strength = <8>;
+};
+
+&sdc1_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc1_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_rclk {
+ bias-pull-down;
+};
+
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
projects / thirdparty / linux.git / commitdiff
