regress: add regress-utils support procedures.

diff --git a/regress/scripts/regress-utils.sh b/regress/scripts/regress-utils.sh
new file mode 100644 (file)
index 0000000..d0c4be6
--- /dev/null
+++ b/regress/scripts/regress-utils.sh
@@ -0,0 +1,291 @@
+#!/bin/bash
+#
+#    Bacula® - The Network Backup Solution
+#
+#    Copyright (C) 2007-2017 Bacula Systems SA
+#    All rights reserved.
+#
+#    The main author of Bacula is Kern Sibbald, with contributions from many
+#    others, a complete list can be found in the file AUTHORS.
+#
+#    Licensees holding a valid Bacula Systems SA license may use this file
+#    and others of this release in accordance with the proprietary license
+#    agreement provided in the LICENSE file.  Redistribution of any part of
+#    this release is not permitted.
+#
+#    Bacula® is a registered trademark of Kern Sibbald.
+#
+#
+# This is an Inteos regression tests support utilities.
+# Author: Radoslaw Korzeniewski, radekk@inteos.pl, Inteos Sp. z o.o.
+#
+
+#
+# the support procedures requires a following variables for proper usage:
+#   $JobName - a Jobname prefix to execute
+#   $tmp - directory for temporary files - set by scripts/functions
+#   $CLIENT - test backup client name - set by scripts/functions
+#   $JOBID - a sequential number corresponding to executed job
+#   $FileSetName - a FileSet prefix for restore job to execute
+#
+
+# now check if we are running under a proper shell
+if test "x$SHELL" != "x/bin/bash"
+then
+  echo "Regression script must use BASH for this utilities!"
+  exit 1
+fi
+
+#
+# setup LPLUG variable used in listing tests
+#
+setup_plugin_param()
+{
+LPLUG=$1
+if [ "x$debug" != "x" ]
+then
+  LPLUG="$LPLUG debug=1"
+fi
+export LPLUG
+}
+
+#
+# common check if test pass by checking input param
+#
+# in:
+# $1 - if variable is equal to zero ("0") then test pass else fail
+#
+regress_test_result()
+{
+if [ $1 -ne 0 ]
+then
+   echo "failed"
+else
+   echo "ok"
+fi
+}
+
+#
+# simplify unittest execution
+#
+# in:
+# $1 - test name to execute - the unittest binary name
+# $2 - test binary directory location
+#
+do_regress_unittest()
+{
+. scripts/functions
+tname=$1
+tdirloc=$2
+make -C ${src}/${tdirloc} ${tname}
+${src}/${tdirloc}/${tname}
+exit $?
+}
+
+#
+# do simple backup job test
+#   generate ${tmp}/blog${ltest}.out job output messages logfile
+#
+# in:
+#      $1 - a test number to perform which means it execute a job=${JobName}${1}
+#
+do_regress_backup_test()
+{
+ltest=$1
+printf "     backup test${ltest} ... "
+cat << END_OF_DATA >${tmp}/bconcmds
+@output /dev/null
+messages
+@$out ${tmp}/blog${ltest}.out
+status client=${CLIENT}
+setdebug level=500 client=${CLIENT} trace=1
+run job=${JobName}${ltest} level=full storage=File1 yes
+wait
+status client=${CLIENT}
+messages
+setdebug level=0 trace=0 client=${CLIENT}
+llist jobid=${JOBID}
+list files jobid=${JOBID}
+quit
+END_OF_DATA
+run_bconsole
+((JOBID++))
+}
+
+#
+# do simpe estimation listing test
+#   generate ${tmp}/elog${ltest}.out job output messages logfile
+#
+# in:
+# $1 - a test number to perform which means it execute a job=${JobName}${1}
+#
+do_regress_estimate_test()
+{
+ltest=$1
+printf "     estimate test${ltest} ... "
+cat << END_OF_DATA > ${tmp}/bconcmds
+#@output /dev/null
+messages
+@$out ${tmp}/elog${ltest}.out
+setdebug level=150 client=${CLIENT} trace=1
+estimate listing job=$JobName fileset=${FileSetName}${ltest} level=Full
+messages
+setdebug level=50 trace=0 client=${CLIENT}
+quit
+END_OF_DATA
+run_bconsole
+}
+
+#
+# do plugin listing test
+#   generate ${tmp}/llog${ltest}.out output listing logfile
+#
+# in:
+# $1 - a test number to perform
+# $2 - a path=... parameter for listing command
+# $3 - custom $LPLUG plugin reference - optional, uses exported LPLUG variable
+#
+do_regress_listing_test()
+{
+ltest=$1
+lpath=$2
+lplug=$LPLUG
+if [ "x$3" != "x" ]
+then
+       lplug=$3
+fi
+printf "     listing test${ltest} ... "
+cat << END_OF_DATA >${tmp}/bconcmds
+#@output /dev/null
+messages
+@$out ${tmp}/llog${ltest}.out
+setdebug level=150 client=${CLIENT} tracee=1
+.ls client=${CLIENT} plugin="$lplug" path=${lpath}
+setdebug level=50 trace=0 client=${CLIENT}
+quit
+END_OF_DATA
+run_bconsole
+}
+
+#
+# do standard restore test
+#   generate ${tmp}/rlog${ltest}.out job output messages logfile
+#
+# in:
+# $1 - a test number to perform
+# $2 - a FileSet number to use for restore test as ${FileSetName}${fs}
+# $3 - a where=... restore parameter
+# $4 - a restore selection command, optional. you can use strings like:
+#     "file=..." or "select all"
+#
+do_regress_restore_test()
+{
+ltest=$1
+fs=$2
+where=$3
+file=$4
+cmd="restore fileset=${FileSetName}${fs} where=$3"
+if [ "x$file" != "x" ]
+then
+   cmd="${cmd} $file"
+fi
+cmd="${cmd} storage=File1 done"
+printf "     restore test${ltest} ... "
+cat << END_OF_DATA >${tmp}/bconcmds
+messages
+@$out ${tmp}/rlog${ltest}.out
+setdebug level=500 client=${CLIENT} trace=1
+${cmd}
+yes
+wait
+setdebug level=0 client=${CLIENT} trace=0
+messages
+llist jobid=${JOBID}
+quit
+END_OF_DATA
+run_bconsole
+((JOBID++))
+}
+
+#
+# check the expected backup job execution status based on logfile
+#   check for status Successful
+#
+# in:
+# $1 - a test number to examine which means we will check blog${ltest}.out logfile
+#
+check_regress_backup_statusT()
+{
+ltest=$1
+RET=`grep "jobstatus: " ${tmp}/blog${ltest}.out | awk '{print $2}'`
+ERRS=$((`grep "joberrors: " ${tmp}/blog${ltest}.out | awk '{print $2}'`+0))
+if [ "x$RET" != "xT" -o $ERRS -ne 0 ]
+then
+   ((bstat++))
+   return 1
+else
+   return 0
+fi
+}
+
+#
+# check the expected backup job execution status based on logfile
+#   check for status Warning
+#
+# in:
+# $1 - a test number to examine which means we will check blog${ltest}.out logfile
+#
+check_regress_backup_statusW()
+{
+ltest=$1
+RET=`grep "jobstatus: " ${tmp}/blog${ltest}.out | awk '{print $2}'`
+ERRS=$((`grep "joberrors: " ${tmp}/blog${ltest}.out | awk '{print $2}'`+0))
+if [ "x$RET" != "xT" -o $ERRS -eq 0 ]
+then
+   ((bstat++))
+   return 1
+else
+   return 0
+fi
+}
+
+#
+# check the expected backup job execution status based on logfile
+#   check for status Error or Fatal error
+#
+# in:
+# $1 - a test number to examine which means we will check blog${ltest}.out logfile
+#
+check_regress_backup_statusE()
+{
+ltest=$1
+RET=`grep "jobstatus: " ${tmp}/blog${ltest}.out | awk '{print $2}'`
+if [ "x$RET" != "xf" -a "x$RET" != "xE" ]
+then
+   ((bstat++))
+   return 1
+else
+   return 0
+fi
+}
+
+#
+# check the expected restore job execution status based on logfile
+#   check for status Successful
+#
+# in:
+# $1 - a test number to examine which means we will check rlog${ltest}.out logfile
+#
+check_regress_restore_statusT()
+{
+ltest=$1
+RET=`grep "jobstatus: " ${tmp}/rlog${ltest}.out | awk '{print $2}'`
+ERRS=$((`grep "joberrors: " ${tmp}/rlog${ltest}.out | awk '{print $2}'`+0))
+if [ "x$RET" != "xT" -o $ERRS -ne 0 ]
+then
+   ((rstat++))
+   return 1
+else
+   return 0
+fi
+}