Convert to use test_and_clear_bit() for link event subtasks. Only re-arm
the WX_FLAG_NEED_MODULE_RESET flag when module is absent. Unsupported or
invalid modules no longer cause the service task to continuously retry
module identification.
Additionally, explicitly cancel service_task during device teardown to
ensure no pending asynchronous service work survives after the device
has entered the DOWN state.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260525100543.27140-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
*speed = SPEED_UNKNOWN;
}
-int txgbe_set_phy_link(struct wx *wx)
+void txgbe_set_phy_link(struct wx *wx)
{
int speed, autoneg, duplex, err;
txgbe_get_link_capabilities(wx, &speed, &autoneg, &duplex);
err = txgbe_set_phy_link_hostif(wx, speed, autoneg, duplex);
- if (err) {
+ if (err)
wx_err(wx, "Failed to setup link\n");
- return err;
- }
-
- return 0;
}
static int txgbe_sfp_to_linkmodes(struct wx *wx, struct txgbe_sff_id *id)
id->identifier != TXGBE_SFF_IDENTIFIER_QSFP_PLUS &&
id->identifier != TXGBE_SFF_IDENTIFIER_QSFP28) {
wx_err(wx, "Invalid module\n");
- return -ENODEV;
+ return -EINVAL;
}
if (id->transceiver_type == 0xFF)
int txgbe_read_eeprom_hostif(struct wx *wx,
struct txgbe_hic_i2c_read *buffer,
u32 length, u8 *data);
-int txgbe_set_phy_link(struct wx *wx);
+void txgbe_set_phy_link(struct wx *wx);
int txgbe_identify_module(struct wx *wx);
void txgbe_setup_link(struct wx *wx);
int txgbe_phylink_init_aml(struct txgbe *txgbe);
{
int err;
- if (!test_bit(WX_FLAG_NEED_MODULE_RESET, wx->flags))
+ if (!test_and_clear_bit(WX_FLAG_NEED_MODULE_RESET, wx->flags))
return;
/* wait for SFF module ready */
msleep(200);
err = txgbe_identify_module(wx);
- if (err)
- return;
-
- clear_bit(WX_FLAG_NEED_MODULE_RESET, wx->flags);
+ if (err == -ENODEV)
+ set_bit(WX_FLAG_NEED_MODULE_RESET, wx->flags);
}
static void txgbe_link_config_subtask(struct wx *wx)
{
- int err;
-
- if (!test_bit(WX_FLAG_NEED_LINK_CONFIG, wx->flags))
+ if (!test_and_clear_bit(WX_FLAG_NEED_LINK_CONFIG, wx->flags))
return;
- err = txgbe_set_phy_link(wx);
- if (err)
- return;
-
- clear_bit(WX_FLAG_NEED_LINK_CONFIG, wx->flags);
+ txgbe_set_phy_link(wx);
}
/**
wx_napi_disable_all(wx);
timer_delete_sync(&wx->service_timer);
+ cancel_work_sync(&wx->service_task);
if (wx->bus.func < 2)
wr32m(wx, TXGBE_MIS_PRB_CTL, TXGBE_MIS_PRB_CTL_LAN_UP(wx->bus.func), 0);