--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+TESTNAME="bpftool_map"
+BPF_FILE="security_bpf_map.bpf.o"
+BPF_ITER_FILE="bpf_iter_map_elem.bpf.o"
+PROTECTED_MAP_NAME="prot_map"
+NOT_PROTECTED_MAP_NAME="not_prot_map"
+BPF_FS_TMP_PARENT="/tmp"
+BPF_FS_PARENT=$(awk '$3 == "bpf" {print $2; exit}' /proc/mounts)
+BPF_FS_PARENT=${BPF_FS_PARENT:-$BPF_FS_TMP_PARENT}
+# bpftool will mount bpf file system under BPF_DIR if it is not mounted
+# under BPF_FS_PARENT.
+BPF_DIR="$BPF_FS_PARENT/test_$TESTNAME"
+SCRIPT_DIR=$(dirname $(realpath "$0"))
+BPF_FILE_PATH="$SCRIPT_DIR/$BPF_FILE"
+BPF_ITER_FILE_PATH="$SCRIPT_DIR/$BPF_ITER_FILE"
+BPFTOOL_PATH="bpftool"
+# Assume the script is located under tools/testing/selftests/bpf/
+KDIR_ROOT_DIR=$(realpath "$SCRIPT_DIR"/../../../../)
+
+_cleanup()
+{
+ set +eu
+
+ # If BPF_DIR is a mount point this will not remove the mount point itself.
+ [ -d "$BPF_DIR" ] && rm -rf "$BPF_DIR" 2> /dev/null
+
+ # Unmount if BPF filesystem was temporarily created.
+ if [ "$BPF_FS_PARENT" = "$BPF_FS_TMP_PARENT" ]; then
+ # A loop and recursive unmount are required as bpftool might
+ # create multiple mounts. For example, a bind mount of the directory
+ # to itself. The bind mount is created to change mount propagation
+ # flags on an actual mount point.
+ max_attempts=3
+ attempt=0
+ while mountpoint -q "$BPF_DIR" && [ $attempt -lt $max_attempts ]; do
+ umount -R "$BPF_DIR" 2>/dev/null
+ attempt=$((attempt+1))
+ done
+
+ # The directory still exists. Remove it now.
+ [ -d "$BPF_DIR" ] && rm -rf "$BPF_DIR" 2>/dev/null
+ fi
+}
+
+cleanup_skip()
+{
+ echo "selftests: $TESTNAME [SKIP]"
+ _cleanup
+
+ exit $ksft_skip
+}
+
+cleanup()
+{
+ if [ "$?" = 0 ]; then
+ echo "selftests: $TESTNAME [PASS]"
+ else
+ echo "selftests: $TESTNAME [FAILED]"
+ fi
+ _cleanup
+}
+
+check_root_privileges() {
+ if [ $(id -u) -ne 0 ]; then
+ echo "Need root privileges"
+ exit $ksft_skip
+ fi
+}
+
+# Function to verify bpftool path.
+# Parameters:
+# $1: bpftool path
+verify_bpftool_path() {
+ local bpftool_path="$1"
+ if ! "$bpftool_path" version > /dev/null 2>&1; then
+ echo "Could not run test without bpftool"
+ exit $ksft_skip
+ fi
+}
+
+# Function to verify BTF support.
+# The test requires BTF support for fmod_ret programs.
+verify_btf_support() {
+ if [ ! -f /sys/kernel/btf/vmlinux ]; then
+ echo "Could not run test without BTF support"
+ exit $ksft_skip
+ fi
+}
+
+# Function to initialize map entries with keys [0..2] and values set to 0.
+# Parameters:
+# $1: Map name
+# $2: bpftool path
+initialize_map_entries() {
+ local map_name="$1"
+ local bpftool_path="$2"
+
+ for key in 0 1 2; do
+ "$bpftool_path" map update name "$map_name" key $key 0 0 0 value 0 0 0 $key
+ done
+}
+
+# Test read access to the map.
+# Parameters:
+# $1: Name command (name/pinned)
+# $2: Map name
+# $3: bpftool path
+# $4: key
+access_for_read() {
+ local name_cmd="$1"
+ local map_name="$2"
+ local bpftool_path="$3"
+ local key="$4"
+
+ # Test read access to the map.
+ if ! "$bpftool_path" map lookup "$name_cmd" "$map_name" key $key 1>/dev/null; then
+ echo " Read access to $key in $map_name failed"
+ exit 1
+ fi
+
+ # Test read access to map's BTF data.
+ if ! "$bpftool_path" btf dump map "$name_cmd" "$map_name" 1>/dev/null; then
+ echo " Read access to $map_name for BTF data failed"
+ exit 1
+ fi
+}
+
+# Test write access to the map.
+# Parameters:
+# $1: Name command (name/pinned)
+# $2: Map name
+# $3: bpftool path
+# $4: key
+# $5: Whether write should succeed (true/false)
+access_for_write() {
+ local name_cmd="$1"
+ local map_name="$2"
+ local bpftool_path="$3"
+ local key="$4"
+ local write_should_succeed="$5"
+ local value="1 1 1 1"
+
+ if "$bpftool_path" map update "$name_cmd" "$map_name" key $key value \
+ $value 2>/dev/null; then
+ if [ "$write_should_succeed" = "false" ]; then
+ echo " Write access to $key in $map_name succeeded but should have failed"
+ exit 1
+ fi
+ else
+ if [ "$write_should_succeed" = "true" ]; then
+ echo " Write access to $key in $map_name failed but should have succeeded"
+ exit 1
+ fi
+ fi
+}
+
+# Test entry deletion for the map.
+# Parameters:
+# $1: Name command (name/pinned)
+# $2: Map name
+# $3: bpftool path
+# $4: key
+# $5: Whether write should succeed (true/false)
+access_for_deletion() {
+ local name_cmd="$1"
+ local map_name="$2"
+ local bpftool_path="$3"
+ local key="$4"
+ local write_should_succeed="$5"
+ local value="1 1 1 1"
+
+ # Test deletion by key for the map.
+ # Before deleting, check the key exists.
+ if ! "$bpftool_path" map lookup "$name_cmd" "$map_name" key $key 1>/dev/null; then
+ echo " Key $key does not exist in $map_name"
+ exit 1
+ fi
+
+ # Delete by key.
+ if "$bpftool_path" map delete "$name_cmd" "$map_name" key $key 2>/dev/null; then
+ if [ "$write_should_succeed" = "false" ]; then
+ echo " Deletion for $key in $map_name succeeded but should have failed"
+ exit 1
+ fi
+ else
+ if [ "$write_should_succeed" = "true" ]; then
+ echo " Deletion for $key in $map_name failed but should have succeeded"
+ exit 1
+ fi
+ fi
+
+ # After deleting, check the entry existence according to the expected status.
+ if "$bpftool_path" map lookup "$name_cmd" "$map_name" key $key 1>/dev/null; then
+ if [ "$write_should_succeed" = "true" ]; then
+ echo " Key $key for $map_name was not deleted but should have been deleted"
+ exit 1
+ fi
+ else
+ if [ "$write_should_succeed" = "false" ]; then
+ echo "Key $key for $map_name was deleted but should have not been deleted"
+ exit 1
+ fi
+ fi
+
+ # Test creation of map's deleted entry, if deletion was successful.
+ # Otherwise, the entry exists.
+ if "$bpftool_path" map update "$name_cmd" "$map_name" key $key value \
+ $value 2>/dev/null; then
+ if [ "$write_should_succeed" = "false" ]; then
+ echo " Write access to $key in $map_name succeeded after deletion attempt but should have failed"
+ exit 1
+ fi
+ else
+ if [ "$write_should_succeed" = "true" ]; then
+ echo " Write access to $key in $map_name failed after deletion attempt but should have succeeded"
+ exit 1
+ fi
+ fi
+}
+
+# Test map elements iterator.
+# Parameters:
+# $1: Name command (name/pinned)
+# $2: Map name
+# $3: bpftool path
+# $4: BPF_DIR
+# $5: bpf iterator object file path
+iterate_map_elem() {
+ local name_cmd="$1"
+ local map_name="$2"
+ local bpftool_path="$3"
+ local bpf_dir="$4"
+ local bpf_file="$5"
+ local pin_path="$bpf_dir/map_iterator"
+
+ "$bpftool_path" iter pin "$bpf_file" "$pin_path" map "$name_cmd" "$map_name"
+ if [ ! -f "$pin_path" ]; then
+ echo " Failed to pin iterator to $pin_path"
+ exit 1
+ fi
+
+ cat "$pin_path" 1>/dev/null
+ rm "$pin_path" 2>/dev/null
+}
+
+# Function to test map access with configurable write expectations
+# Parameters:
+# $1: Name command (name/pinned)
+# $2: Map name
+# $3: bpftool path
+# $4: key for rw
+# $5: key to delete
+# $6: Whether write should succeed (true/false)
+# $7: BPF_DIR
+# $8: bpf iterator object file path
+access_map() {
+ local name_cmd="$1"
+ local map_name="$2"
+ local bpftool_path="$3"
+ local key_for_rw="$4"
+ local key_to_del="$5"
+ local write_should_succeed="$6"
+ local bpf_dir="$7"
+ local bpf_iter_file_path="$8"
+
+ access_for_read "$name_cmd" "$map_name" "$bpftool_path" "$key_for_rw"
+ access_for_write "$name_cmd" "$map_name" "$bpftool_path" "$key_for_rw" \
+ "$write_should_succeed"
+ access_for_deletion "$name_cmd" "$map_name" "$bpftool_path" "$key_to_del" \
+ "$write_should_succeed"
+ iterate_map_elem "$name_cmd" "$map_name" "$bpftool_path" "$bpf_dir" \
+ "$bpf_iter_file_path"
+}
+
+# Function to test map access with configurable write expectations
+# Parameters:
+# $1: Map name
+# $2: bpftool path
+# $3: BPF_DIR
+# $4: Whether write should succeed (true/false)
+# $5: bpf iterator object file path
+test_map_access() {
+ local map_name="$1"
+ local bpftool_path="$2"
+ local bpf_dir="$3"
+ local pin_path="$bpf_dir/${map_name}_pinned"
+ local write_should_succeed="$4"
+ local bpf_iter_file_path="$5"
+
+ # Test access to the map by name.
+ access_map "name" "$map_name" "$bpftool_path" "0 0 0 0" "1 0 0 0" \
+ "$write_should_succeed" "$bpf_dir" "$bpf_iter_file_path"
+
+ # Pin the map to the BPF filesystem
+ "$bpftool_path" map pin name "$map_name" "$pin_path"
+ if [ ! -e "$pin_path" ]; then
+ echo " Failed to pin $map_name"
+ exit 1
+ fi
+
+ # Test access to the pinned map.
+ access_map "pinned" "$pin_path" "$bpftool_path" "0 0 0 0" "2 0 0 0" \
+ "$write_should_succeed" "$bpf_dir" "$bpf_iter_file_path"
+}
+
+# Function to test map creation and map-of-maps
+# Parameters:
+# $1: bpftool path
+# $2: BPF_DIR
+test_map_creation_and_map_of_maps() {
+ local bpftool_path="$1"
+ local bpf_dir="$2"
+ local outer_map_name="outer_map_tt"
+ local inner_map_name="inner_map_tt"
+
+ "$bpftool_path" map create "$bpf_dir/$inner_map_name" type array key 4 \
+ value 4 entries 4 name "$inner_map_name"
+ if [ ! -f "$bpf_dir/$inner_map_name" ]; then
+ echo " Failed to create inner map file at $bpf_dir/$outer_map_name"
+ return 1
+ fi
+
+ "$bpftool_path" map create "$bpf_dir/$outer_map_name" type hash_of_maps \
+ key 4 value 4 entries 2 name "$outer_map_name" inner_map name "$inner_map_name"
+ if [ ! -f "$bpf_dir/$outer_map_name" ]; then
+ echo " Failed to create outer map file at $bpf_dir/$outer_map_name"
+ return 1
+ fi
+
+ # Add entries to the outer map by name and by pinned path.
+ "$bpftool_path" map update pinned "$bpf_dir/$outer_map_name" key 0 0 0 0 \
+ value pinned "$bpf_dir/$inner_map_name"
+ "$bpftool_path" map update name "$outer_map_name" key 1 0 0 0 value \
+ name "$inner_map_name"
+
+ # The outer map should be full by now.
+ # The following map update command is expected to fail.
+ if "$bpftool_path" map update name "$outer_map_name" key 2 0 0 0 value name \
+ "$inner_map_name" 2>/dev/null; then
+ echo " Update for $outer_map_name succeeded but should have failed"
+ exit 1
+ fi
+}
+
+# Function to test map access with the btf list command
+# Parameters:
+# $1: bpftool path
+test_map_access_with_btf_list() {
+ local bpftool_path="$1"
+
+ # The btf list command iterates over maps for
+ # loaded BPF programs.
+ if ! "$bpftool_path" btf list 1>/dev/null; then
+ echo " Failed to access btf data"
+ exit 1
+ fi
+}
+
+set -eu
+
+trap cleanup_skip EXIT
+
+check_root_privileges
+
+verify_bpftool_path "$BPFTOOL_PATH"
+
+verify_btf_support
+
+trap cleanup EXIT
+
+# Load and attach the BPF programs to control maps access.
+"$BPFTOOL_PATH" prog loadall "$BPF_FILE_PATH" "$BPF_DIR" autoattach
+
+initialize_map_entries "$PROTECTED_MAP_NAME" "$BPFTOOL_PATH"
+initialize_map_entries "$NOT_PROTECTED_MAP_NAME" "$BPFTOOL_PATH"
+
+# Activate the map protection mechanism. Protection status is controlled
+# by a value stored in the prot_status_map at index 0.
+"$BPFTOOL_PATH" map update name prot_status_map key 0 0 0 0 value 1 0 0 0
+
+# Test protected map (write should fail).
+test_map_access "$PROTECTED_MAP_NAME" "$BPFTOOL_PATH" "$BPF_DIR" "false" \
+ "$BPF_ITER_FILE_PATH"
+
+# Test not protected map (write should succeed).
+test_map_access "$NOT_PROTECTED_MAP_NAME" "$BPFTOOL_PATH" "$BPF_DIR" "true" \
+ "$BPF_ITER_FILE_PATH"
+
+test_map_creation_and_map_of_maps "$BPFTOOL_PATH" "$BPF_DIR"
+
+test_map_access_with_btf_list "$BPFTOOL_PATH"
+
+exit 0
projects / thirdparty / linux.git / commitdiff
