]> git.ipfire.org Git - thirdparty/bird.git/commitdiff
Minor fixes.
authorMartin Mares <mj@ucw.cz>
Fri, 2 Jun 2000 09:46:35 +0000 (09:46 +0000)
committerMartin Mares <mj@ucw.cz>
Fri, 2 Jun 2000 09:46:35 +0000 (09:46 +0000)
doc/bird.sgml

index 77d820c3d8e0f4cf2ba7a1493a32fbb42da3a429..eb09b02c64f8f34fc26979d2daeceb7db513de9b 100644 (file)
@@ -623,7 +623,8 @@ for each neighbor using the following protocol parameters:
        <tag>neighbor <m/ip/ as <m/number/</tag> Define neighboring router
        this instance will be talking to and what AS it's located in. Unless
        you use the <cf/multihop/ clause, it must be directly connected to one
-       of your router's interfaces. This parameter is mandatory.
+       of your router's interfaces. In case the neighbor is in the same AS
+       as we are, we automatically switch to iBGP. This parameter is mandatory.
        <tag>multihop <m/number/ via <m/ip/</tag> Configure multihop BGP to a
        neighbor which is connected at most <m/number/ hops far and to which
        we should route via our direct neighbor with address <m/ip/.
@@ -683,7 +684,7 @@ with `O') are optional.
        selection among multiple BGP routes (see the selection rules above). It's
        used as an additional metric which is propagated through the whole local AS.
        <tag>int <cf/bgp_med/ [IO]</tag> The Multiple Exit Discriminator of the route
-       which is an optional attribute which is often used within the local AS to
+       is an optional attribute which is often used within the local AS to
        reflect interior distances to various boundary routers. See the route selection
        rules above for exact semantics.
        <tag>enum <cf/bgp_origin/</tag> Origin of the route: either <cf/ORIGIN_IGP/,
@@ -803,7 +804,9 @@ with other routers in the network, it performs synchronization of BIRD's routing
 tables with OS kernel. Basically, it sends all routing table updates to the kernel
 and from time to time it scans the kernel tables to see whether some routes have
 disappeared (for example due to unnoticed up/down transition of an interface)
-or whether an `alien' route has been added by someone else.
+or whether an `alien' route has been added by someone else (depending on the
+<cf/learn/ switch, such routes are either deleted or we accept them to our
+table).
 
 <p>If your OS supports only a single routing table, you can configure only one
 instance of the Kernel protocol. If it supports multiple tables (in order to
@@ -1064,7 +1067,7 @@ protocol rip MyRIP_test {
 <sect1>Static
 
 <p>The Static protocol doesn't communicate with other routers in the network,
-but instead it allows you to define routes manually which is often used for
+but instead it allows you to define routes manually. This is often used for
 specifying how to forward packets to parts of the network which don't use
 dynamic routing at all and also for defining sink routes (i.e., those
 telling to return packets as undeliverable if they are in your IP block,