arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT

PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.

Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index f8303b7e2bd22b9529d5f3063894d1cdd5556d59..0a6a60670f762f1400653d1e7d0f4c0fcaf6bcd4 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -989,7 +989,7 @@
        pinctrl_pmic: dhcom-pmic-grp {
                fsl,pins = <
                        /* PMIC_nINT */
-                       MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03             0x40000090
+                       MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03             0x1c0
                >;
        };