if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
$(MKINSTALLDIRS) $(DESTDIR)$(sysconfdir) ; \
fi ; \
+ if [ ! -d $(DESTDIR)$(sysconfdir)/extra ]; then \
+ $(MKINSTALLDIRS) $(DESTDIR)$(sysconfdir)/extra ; \
+ fi ; \
+ if [ ! -d $(DESTDIR)$(sysconfdir)/original ]; then \
+ $(MKINSTALLDIRS) $(DESTDIR)$(sysconfdir)/original ; \
+ $(MKINSTALLDIRS) $(DESTDIR)$(sysconfdir)/original/extra ; \
+ fi ; \
cd $(top_srcdir)/docs/conf; \
for i in mime.types magic; do \
if test ! -f $(DESTDIR)$(sysconfdir)/$$i; then \
done; \
for j in $(top_srcdir)/docs/conf $(top_builddir)/docs/conf ; do \
cd $$j ; \
- for i in *-std*.conf; do \
+ for i in httpd.conf extra/httpd-*.conf; do \
( \
n_lm=`awk 'BEGIN {n=0} /@@LoadModule@@/ {n+=1} END {print n}' < $$i`; \
if test $$n_lm -eq 0 -o "x$(DSO_MODULES)" = "x"; then \
-e 'p' \
< $$i; \
for j in $(DSO_MODULES) "^EOL^"; do \
- if test "x$$j" = "xssl"; then \
- echo "<IfDefine SSL>"; \
- fi; \
if test $$j != "^EOL^"; then \
echo "LoadModule $${j}_module $(rel_libexecdir)/mod_$${j}.so"; \
fi; \
- if test "x$$j" = "xssl"; then \
- echo "</IfDefine>"; \
- fi; \
done; \
sed -e '1,/@@LoadModule@@/d' \
-e '/@@LoadModule@@/d' \
-e 's#@@Port@@#$(PORT)#g' \
< $$i; \
fi \
- ) > $(DESTDIR)$(sysconfdir)/$$i; \
- chmod 0644 $(DESTDIR)$(sysconfdir)/$$i; \
- file=`echo $$i|sed s/-std//`; \
- if [ "$$file" = "httpd.conf" ]; then \
- file=`echo $$file|sed s/.*.conf/$(PROGRAM_NAME).conf/`; \
+ ) > $(DESTDIR)$(sysconfdir)/original/$$i; \
+ chmod 0644 $(DESTDIR)$(sysconfdir)/original/$$i; \
+ file=$$i; \
+ if [ "$$i" = "httpd.conf" ]; then \
+ file=`echo $$i|sed s/.*.conf/$(PROGRAM_NAME).conf/`; \
fi; \
- if test "$$file" != "$$i" && test ! -f $(DESTDIR)$(sysconfdir)/$$file; then \
- $(INSTALL_DATA) $(DESTDIR)$(sysconfdir)/$$i $(DESTDIR)$(sysconfdir)/$$file; \
+ if test ! -f $(DESTDIR)$(sysconfdir)/$$i; then \
+ $(INSTALL_DATA) $(DESTDIR)$(sysconfdir)/original/$$i $(DESTDIR)$(sysconfdir)/$$file; \
fi; \
done ; \
done ; \
HTTPD_VERSION=`$abs_srcdir/build/get-version.sh all $abs_srcdir/include/ap_release.h AP_SERVER`
AC_SUBST(HTTPD_VERSION)
-AC_OUTPUT($APACHE_OUTPUT_FILES docs/conf/httpd-std.conf docs/conf/ssl-std.conf include/ap_config_layout.h support/apxs support/apachectl support/dbmmanage support/envvars-std support/log_server_status support/logresolve.pl support/phf_abuse_log.cgi support/split-logfile build/rules.mk build/pkg/pkginfo,[true],[
+AC_OUTPUT($APACHE_OUTPUT_FILES docs/conf/httpd.conf docs/conf/extra/httpd-autoindex.conf docs/conf/extra/httpd-dav.conf docs/conf/extra/httpd-default.conf docs/conf/extra/httpd-info.conf docs/conf/extra/httpd-languages.conf docs/conf/extra/httpd-manual.conf docs/conf/extra/httpd-mpm.conf docs/conf/extra/httpd-multilang-errordoc.conf docs/conf/extra/httpd-ssl.conf docs/conf/extra/httpd-userdir.conf docs/conf/extra/httpd-vhosts.conf include/ap_config_layout.h support/apxs support/apachectl support/dbmmanage support/envvars-std support/log_server_status support/logresolve.pl support/phf_abuse_log.cgi support/split-logfile build/rules.mk build/pkg/pkginfo,[true],[
APACHE_GEN_MAKEFILES
])
--- /dev/null
+#
+# Directives controlling the display of server-generated directory listings.
+#
+# Required modules: mod_autoindex, mod_alias
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+#
+
+#
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+#
+IndexOptions FancyIndexing VersionSort
+
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+#
+Alias /icons/ "@exp_iconsdir@/"
+
+<Directory "@exp_iconsdir@">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
--- /dev/null
+#
+# Distributed authoring and versioning (WebDAV)
+#
+# Required modules: mod_dav, mod_dav_fs, mod_setenvif, mod_alias
+# mod_auth_digest, mod_authn_file
+#
+
+# The following example gives DAV write access to a directory called
+# "uploads" under the ServerRoot directory.
+#
+# The User/Group specified in httpd.conf needs to have write permissions
+# on the directory where the DavLockDB is placed and on any directory where
+# "Dav On" is specified.
+
+DavLockDB "@@ServerRoot@@/var/DavLock"
+
+Alias /uploads "@@ServerRoot@@/uploads"
+
+<Directory "@@ServerRoot@@/uploads">
+ Dav On
+
+ AuthType Digest
+ AuthName DAV-upload
+ # You can use the htdigest program to create the password database:
+ # htdigest -c "@@ServerRoot@@/user.passwd" DAV-upload admin
+ AuthUserFile "@@ServerRoot@@/user.passwd"
+
+ # Allow universal read-access, but writes are restricted
+ # to the admin user.
+ <LimitExcept GET OPTIONS>
+ require user admin
+ </LimitExcept>
+</Directory>
+
+#
+# The following directives disable redirects on non-GET requests for
+# a directory that does not include the trailing slash. This fixes a
+# problem with several clients that do not appropriately handle
+# redirects for folders with DAV methods.
+#
+BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+BrowserMatch "^WebDrive" redirect-carefully
+BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
+BrowserMatch "^gnome-vfs/1.0" redirect-carefully
+BrowserMatch "^XML Spy" redirect-carefully
\ No newline at end of file
--- /dev/null
+#
+# This configuration file reflects default settings for Apache HTTP Server.
+#
+# You may change these, but chances are that you may not need to.
+#
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+#
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client. When set "On", Apache will use the value of the
+# ServerName directive.
+#
+UseCanonicalName Off
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+#
+AccessFileName .htaccess
+
+#
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+#
+ServerTokens Full
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+#
+ServerSignature On
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
--- /dev/null
+#
+# Get information about the requests being processed by the server
+# and the configuration of the server.
+#
+# Required modules: mod_status (for the server-status handler),
+# mod_info (for the server-info handler)
+
+#
+# Allow server status reports generated by mod_status,
+# with the URL of http://servername/server-status
+# Change the ".example.com" to match your domain to enable.
+
+<Location /server-status>
+ SetHandler server-status
+ Order deny,allow
+ Deny from all
+ Allow from .example.com
+</Location>
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+#
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".example.com" to match your domain to enable.
+#
+<Location /server-info>
+ SetHandler server-info
+ Order deny,allow
+ Deny from all
+ Allow from .example.com
+</Location>
--- /dev/null
+#
+# Settings for hosting different languages.
+#
+# Required modules: mod_mime, mod_negotiation
+
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# * It is generally better to not mark a page as
+# * being a certain language than marking it with the wrong
+# * language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+#
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+#
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+#
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+#
+ForceLanguagePriority Prefer Fallback
+
+#
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See http://www.iana.org/assignments/character-sets for the
+# official list of charset names and their respective RFCs.
+#
+AddCharset us-ascii.ascii .us-ascii
+AddCharset ISO-8859-1 .iso8859-1 .latin1
+AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3 .iso8859-3 .latin3
+AddCharset ISO-8859-4 .iso8859-4 .latin4
+AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
+AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
+AddCharset ISO-8859-7 .iso8859-7 .grk .greek
+AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
+AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
+AddCharset ISO-8859-10 .iso8859-10 .latin6
+AddCharset ISO-8859-13 .iso8859-13
+AddCharset ISO-8859-14 .iso8859-14 .latin8
+AddCharset ISO-8859-15 .iso8859-15 .latin9
+AddCharset ISO-8859-16 .iso8859-16 .latin10
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5.Big5 .big5 .b5
+AddCharset cn-Big5 .cn-big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251 .win-1251
+AddCharset CP866 .cp866
+AddCharset KOI8 .koi8
+AddCharset KOI8-E .koi8-e
+AddCharset KOI8-r .koi8-r .koi8-ru
+AddCharset KOI8-U .koi8-u
+AddCharset KOI8-ru .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-7 .utf7
+AddCharset UTF-8 .utf8
+AddCharset UTF-16 .utf16
+AddCharset UTF-16BE.utf16be
+AddCharset UTF-16LE.utf16le
+AddCharset UTF-32 .utf32
+AddCharset UTF-32BE.utf32be
+AddCharset UTF-32LE.utf32le
+AddCharset euc-cn .euc-cn
+AddCharset euc-gb .euc-gb
+AddCharset euc-jp .euc-jp
+AddCharset euc-kr .euc-kr
+#Not sure how euc-tw got in - IANA doesn't list it???
+AddCharset EUC-TW .euc-tw
+AddCharset gb2312 .gb2312 .gb
+AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
+AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
+AddCharset shift_jis .shift_jis .sjis
\ No newline at end of file
--- /dev/null
+#
+# Provide access to the documentation on your server as
+# http://yourserver.example.com/manual/
+# The documentation is always available at
+# http://httpd.apache.org/docs-2.1/
+#
+# Required modules: mod_alias, mod_setenvif, mod_negotiation
+#
+
+AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ "@exp_manualdir@$1"
+
+<Directory "@exp_manualdir@">
+ Options Indexes
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+
+ <Files *.html>
+ SetHandler type-map
+ </Files>
+
+ SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
+ RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
+
+ LanguagePriority en de es fr ja ko pt-br ru
+ ForceLanguagePriority Prefer Fallback
+</Directory>
--- /dev/null
+#
+# Server-Pool Management (MPM specific)
+#
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+# Note that this is the default PidFile for most MPMs.
+#
+<IfModule !mpm_netware_module>
+ PidFile @rel_runtimedir@/httpd.pid
+</IfModule>
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+<IfModule !mpm_winnt_module>
+<IfModule !mpm_netware_module>
+LockFile @rel_logfiledir@/accept.lock
+</IfModule>
+</IfModule>
+
+#
+# Only one of the below sections will be relevant on your
+# installed httpd. Use "apachectl -l" to find out the
+# active mpm.
+#
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+ StartServers 5
+ MinSpareServers 5
+ MaxSpareServers 10
+ MaxClients 150
+ MaxRequestsPerChild 0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+ StartServers 2
+ MaxClients 150
+ MinSpareThreads 25
+ MaxSpareThreads 75
+ ThreadsPerChild 25
+ MaxRequestsPerChild 0
+</IfModule>
+
+# perchild MPM
+# NumServers: constant number of server processes
+# StartThreads: initial number of worker threads in each server process
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# MaxThreadsPerChild: maximum number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of connections per server process
+<IfModule mpm_perchild_module>
+ NumServers 5
+ StartThreads 5
+ MinSpareThreads 5
+ MaxSpareThreads 10
+ MaxThreadsPerChild 20
+ MaxRequestsPerChild 0
+</IfModule>
+
+# WinNT MPM
+# ThreadsPerChild: constant number of worker threads in the server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_winnt_module>
+ ThreadsPerChild 250
+ MaxRequestsPerChild 0
+</IfModule>
+
+# BeOS MPM
+# StartThreads: how many threads do we initially spawn?
+# MaxClients: max number of threads we can have (1 thread == 1 client)
+# MaxRequestsPerThread: maximum number of requests each thread will process
+<IfModule mpm_beos_module>
+ StartThreads 10
+ MaxClients 50
+ MaxRequestsPerThread 10000
+</IfModule>
+
+# NetWare MPM
+# ThreadStackSize: Stack size allocated for each worker thread
+# StartThreads: Number of worker threads launched at server startup
+# MinSpareThreads: Minimum number of idle threads, to handle request spikes
+# MaxSpareThreads: Maximum number of idle threads
+# MaxThreads: Maximum number of worker threads alive at the same time
+# MaxRequestsPerChild: Maximum number of requests a thread serves. It is
+# recommended that the default value of 0 be set for this
+# directive on NetWare. This will allow the thread to
+# continue to service requests indefinitely.
+<IfModule mpm_netware_module>
+ ThreadStackSize 65536
+ StartThreads 250
+ MinSpareThreads 25
+ MaxSpareThreads 250
+ MaxThreads 1000
+ MaxRequestsPerChild 0
+ MaxMemFree 100
+</IfModule>
+
+# OS/2 MPM
+# StartServers: Number of server processes to maintain
+# MinSpareThreads: Minimum number of idle threads per process,
+# to handle request spikes
+# MaxSpareThreads: Maximum number of idle threads per process
+# MaxRequestsPerChild: Maximum number of connections per server process
+<IfModule mpm_mpmt_os2_module>
+ StartServers 2
+ MinSpareThreads 5
+ MaxSpareThreads 10
+ MaxRequestsPerChild 0
+</IfModule>
--- /dev/null
+#
+# The configuration below implements multi-language error documents through
+# content-negotiation.
+#
+# Required modules: mod_alias, mod_include, mod_negotiation
+#
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections. We use
+# includes to substitute the appropriate text.
+#
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line:
+#
+# Alias /error/include/ "/your/include/path/"
+#
+# which allows you to create your own set of files by starting with the
+# @exp_errordir@/include/ files and copying them to /your/include/path/,
+# even on a per-VirtualHost basis. The default include files will display
+# your Apache version number and your ServerAdmin email address regardless
+# of the setting of ServerSignature.
+
+Alias /error/ "@exp_errordir@/"
+
+<Directory "@exp_errordir@">
+ AllowOverride None
+ Options IncludesNoExec
+ AddOutputFilter Includes html
+ AddHandler type-map var
+ Order allow,deny
+ Allow from all
+ LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
+ ForceLanguagePriority Prefer Fallback
+</Directory>
+
+ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+ErrorDocument 410 /error/HTTP_GONE.html.var
+ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
+ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
-# Note: This must come before the <IfDefine SSL> container to support
-# starting without SSL on platforms with no /dev/random equivalent
-# but a statically compiled-in mod_ssl.
-#
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
-<IfDefine SSL>
#
# When we also provide SSL we have to listen to the
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
-
-</IfDefine>
--- /dev/null
+# Settings for user home directories
+#
+# Required module: mod_userdir
+
+#
+# UserDir: The name of the directory that is appended onto a user's home
+# directory if a ~user request is received. Note that you must also set
+# the default access control for these directories, as in the example below.
+#
+UserDir public_html
+
+#
+# Control access to UserDir directories. The following is an example
+# for a site where these directories are restricted to read-only.
+#
+<Directory /home/*/public_html>
+ AllowOverride FileInfo AuthConfig Limit Indexes
+ Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+ <Limit GET POST OPTIONS PROPFIND>
+ Order allow,deny
+ Allow from all
+ </Limit>
+ <LimitExcept GET POST OPTIONS PROPFIND>
+ Order deny,allow
+ Deny from all
+ </LimitExcept>
+</Directory>
+
--- /dev/null
+#
+# Virtual Hosts
+#
+# If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs-2.1/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# Use name-based virtual hosting.
+#
+NameVirtualHost *:80
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+# The first VirtualHost section is used for all requests that do not
+# match a ServerName or ServerAlias in any <VirtualHost> block.
+#
+<VirtualHost *:80>
+ ServerAdmin webmaster@dummy-host.example.com
+ DocumentRoot /www/docs/dummy-host.example.com
+ ServerName dummy-host.example.com
+ ServerAlias www.dummy-host.example.com
+ ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
+ CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
+</VirtualHost>
+
+<VirtualHost *:80>
+ ServerAdmin webmaster@dummy-host2.example.com
+ DocumentRoot /www/docs/dummy-host2.example.com
+ ServerName dummy-host2.example.com
+ ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
+ CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
+</VirtualHost>
+
+
+
+++ /dev/null
-# Ha, you're reading this config file looking for the easy way out!
-# "how do I make my apache server go really really fast??"
-# Well you could start by reading the /manual/misc/perf-tuning.html
-# page. But, we'll give you a head start.
-#
-# This config file is small, it is probably not what you'd expect on a
-# full featured internet webserver with multiple users. But it's
-# probably a good starting point for any folks interested in testing
-# performance.
-#
-# To run this config you'll need to use something like:
-# httpd -f @@ServerRoot@@/conf/highperformance.conf
-
-Listen 80
-ServerRoot @@ServerRoot@@
-DocumentRoot @@ServerRoot@@/htdocs
-
-User nobody
-# If you're not on Linux, you'll probably need to change Group
-Group nobody
-
-<IfModule prefork.c>
-MaxClients 150
-StartServers 5
-MinSpareServers 5
-MaxSpareServers 10
-</IfModule>
-
-<IfModule worker.c>
-StartServers 2
-MaxClients 150
-MinSpareThreads 25
-MaxSpareThreads 75
-ThreadsPerChild 25
-MaxRequestsPerChild 0
-</IfModule>
-
-# Assume no memory leaks at all
-MaxRequestsPerChild 0
-
-# it's always nice to know the server has started
-ErrorLog logs/error_log
-
-# Some benchmarks require logging, which is a good requirement. Uncomment
-# this if you need logging.
-#TransferLog logs/access_log
-
-<Directory />
- # The server can be made to avoid following symbolic links,
- # to make security simpler. However, this takes extra CPU time,
- # so we will just let it follow symlinks.
- Options FollowSymLinks
-
- # Don't check for .htaccess files in each directory - they slow
- # things down
- AllowOverride None
-
- # If this was a real internet server you'd probably want to
- # uncomment these:
- #order deny,allow
- #deny from all
-</Directory>
-
-# If this was a real internet server you'd probably want to uncomment this:
-#<Directory "@@ServerRoot@@/htdocs">
-# order allow,deny
-# allow from all
-#</Directory>
-
-# OK that's enough hints. Read the documentation if you want more.
+++ /dev/null
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs-2.1/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# The configuration directives are grouped into three basic sections:
-# 1. Directives that control the operation of the Apache server process as a
-# whole (the 'global environment').
-# 2. Directives that define the parameters of the 'main' or 'default' server,
-# which responds to requests that aren't handled by a virtual host.
-# These directives also provide default values for the settings
-# of all virtual hosts.
-# 3. Settings for virtual hosts, which allow Web requests to be sent to
-# different IP addresses or hostnames and have them handled by the
-# same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "@rel_logfiledir@/foo.log"
-# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
-# server as "@@ServerRoot@@/@rel_logfiledir@/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation (available
-# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot "@@ServerRoot@@"
-
-#
-# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#
-#<IfModule !mpm_winnt_module>
-#<IfModule !mpm_netware_module>
-#LockFile @rel_logfiledir@/accept.lock
-#</IfModule>
-#</IfModule>
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# If unspecified (the default), the scoreboard will be stored in an
-# anonymous shared memory segment, and will be unavailable to third-party
-# applications.
-# If specified, ensure that no two invocations of Apache share the same
-# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
-#
-#<IfModule !mpm_netware_module>
-#<IfModule !mpm_perchild_module>
-#ScoreBoardFile @rel_logfiledir@/apache_runtime_status
-#</IfModule>
-#</IfModule>
-
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-<IfModule !mpm_netware_module>
- PidFile @rel_runtimedir@/httpd.pid
-</IfModule>
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-##
-## Server-Pool Size Regulation (MPM specific)
-##
-
-# prefork MPM
-# StartServers: number of server processes to start
-# MinSpareServers: minimum number of server processes which are kept spare
-# MaxSpareServers: maximum number of server processes which are kept spare
-# MaxClients: maximum number of server processes allowed to start
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_prefork_module>
- StartServers 5
- MinSpareServers 5
- MaxSpareServers 10
- MaxClients 150
- MaxRequestsPerChild 0
-</IfModule>
-
-# worker MPM
-# StartServers: initial number of server processes to start
-# MaxClients: maximum number of simultaneous client connections
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# ThreadsPerChild: constant number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_worker_module>
- StartServers 2
- MaxClients 150
- MinSpareThreads 25
- MaxSpareThreads 75
- ThreadsPerChild 25
- MaxRequestsPerChild 0
-</IfModule>
-
-# perchild MPM
-# NumServers: constant number of server processes
-# StartThreads: initial number of worker threads in each server process
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# MaxThreadsPerChild: maximum number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of connections per server process
-<IfModule mpm_perchild_module>
- NumServers 5
- StartThreads 5
- MinSpareThreads 5
- MaxSpareThreads 10
- MaxThreadsPerChild 20
- MaxRequestsPerChild 0
-</IfModule>
-
-# WinNT MPM
-# ThreadsPerChild: constant number of worker threads in the server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_winnt_module>
- ThreadsPerChild 250
- MaxRequestsPerChild 0
-</IfModule>
-
-# BeOS MPM
-# StartThreads: how many threads do we initially spawn?
-# MaxClients: max number of threads we can have (1 thread == 1 client)
-# MaxRequestsPerThread: maximum number of requests each thread will process
-<IfModule mpm_beos_module>
- StartThreads 10
- MaxClients 50
- MaxRequestsPerThread 10000
-</IfModule>
-
-# NetWare MPM
-# ThreadStackSize: Stack size allocated for each worker thread
-# StartThreads: Number of worker threads launched at server startup
-# MinSpareThreads: Minimum number of idle threads, to handle request spikes
-# MaxSpareThreads: Maximum number of idle threads
-# MaxThreads: Maximum number of worker threads alive at the same time
-# MaxRequestsPerChild: Maximum number of requests a thread serves. It is
-# recommended that the default value of 0 be set for this
-# directive on NetWare. This will allow the thread to
-# continue to service requests indefinitely.
-<IfModule mpm_netware_module>
- ThreadStackSize 65536
- StartThreads 250
- MinSpareThreads 25
- MaxSpareThreads 250
- MaxThreads 1000
- MaxRequestsPerChild 0
- MaxMemFree 100
-</IfModule>
-
-# OS/2 MPM
-# StartServers: Number of server processes to maintain
-# MinSpareThreads: Minimum number of idle threads per process,
-# to handle request spikes
-# MaxSpareThreads: Maximum number of idle threads per process
-# MaxRequestsPerChild: Maximum number of connections per server process
-<IfModule mpm_mpmt_os2_module>
- StartServers 2
- MinSpareThreads 5
- MaxSpareThreads 10
- MaxRequestsPerChild 0
-</IfModule>
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
-#
-#Listen 12.34.56.78:80
-Listen @@Port@@
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-@@LoadModule@@
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-<IfModule !mpm_winnt_module>
-<IfModule !mpm_netware_module>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-# . On HPUX you may not be able to use shared memory as nobody, and the
-# suggested workaround is to create a user www and use that user.
-# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-# when the value of (unsigned)Group is above 60000;
-# don't use Group #-1 on these systems!
-#
-User nobody
-Group #-1
-</IfModule>
-</IfModule>
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents. e.g. admin@your-domain.com
-#
-ServerAdmin you@example.com
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If this is not set to valid DNS name for your host, server-generated
-# redirections will not work. See also the UseCanonicalName directive.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address anyway, and this will make
-# redirections work in a sensible way.
-#
-#ServerName www.example.com:80
-
-#
-# UseCanonicalName: Determines how Apache constructs self-referencing
-# URLs and the SERVER_NAME and SERVER_PORT variables.
-# When set "Off", Apache will use the Hostname and Port supplied
-# by the client. When set "On", Apache will use the value of the
-# ServerName directive.
-#
-UseCanonicalName Off
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "@exp_htdocsdir@"
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# features.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
- Order deny,allow
- Deny from all
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "@exp_htdocsdir@">
-
- #
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs-2.1/mod/core.html#options
- # for more information.
- #
- Options Indexes FollowSymLinks
-
- #
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # Options FileInfo AuthConfig Limit
- #
- AllowOverride None
-
- #
- # Controls who can get stuff from this server.
- #
- Order allow,deny
- Allow from all
-
-</Directory>
-
-#
-# UserDir: The name of the directory that is appended onto a user's home
-# directory if a ~user request is received. Note that you must also set
-# the default access control for these directories, as in the example below.
-#
-<IfModule userdir_module>
- UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit Indexes
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <LimitExcept GET POST OPTIONS PROPFIND>
-# Order deny,allow
-# Deny from all
-# </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-# The index.html.var file (a type-map) is used to deliver content-
-# negotiated documents. The MultiViews Option can be used for the
-# same purpose, but it is much slower.
-#
-<IfModule dir_module>
- DirectoryIndex index.html index.html.var
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for additional configuration directives. See also the AllowOverride
-# directive.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being
-# viewed by Web clients.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
-</Files>
-
-<IfModule mime_module>
- #
- # TypesConfig describes where the mime.types file (or equivalent) is
- # to be found.
- #
- TypesConfig @rel_sysconfdir@/mime.types
-
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-<IfModule mime_magic_module>
- MIMEMagicFile @rel_sysconfdir@/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# EnableMMAP: Control whether memory-mapping is used to deliver
-# files (assuming that the underlying OS supports it).
-# The default is on; turn this off if you serve from NFS-mounted
-# filesystems. On some systems, turning it off (regardless of
-# filesystem) can improve performance; for details, please see
-# http://httpd.apache.org/docs-2.1/mod/core.html#enablemmap
-#
-#EnableMMAP off
-
-#
-# EnableSendfile: Control whether the sendfile kernel support is
-# used to deliver files (assuming that the OS supports it).
-# The default is on; turn this off if you serve from NFS-mounted
-# filesystems. Please see
-# http://httpd.apache.org/docs-2.1/mod/core.html#enablesendfile
-#
-#EnableSendfile off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog @rel_logfiledir@/error_log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-<IfModule log_config_module>
- #
- # The following directives define some format nicknames for use with
- # a CustomLog directive (see below).
- #
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
- LogFormat "%h %l %u %t \"%r\" %>s %b" common
- LogFormat "%{Referer}i -> %U" referer
- LogFormat "%{User-agent}i" agent
-
- <IfModule logio_module>
- # You need to enable mod_logio.c to use %I and %O
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
- </IfModule>
-
- #
- # The location and format of the access logfile (Common Logfile Format).
- # If you do not define any access logfiles within a <VirtualHost>
- # container, they will be logged here. Contrariwise, if you *do*
- # define per-<VirtualHost> access logfiles, transactions will be
- # logged therein and *not* in this file.
- #
- CustomLog @rel_logfiledir@/access_log common
-
- #
- # If you would like to have agent and referer logfiles, uncomment the
- # following directives.
- #
- #CustomLog @rel_logfiledir@/referer_log referer
- #CustomLog @rel_logfiledir@/agent_log agent
-
- #
- # If you prefer a single logfile with access, agent, and referer information
- # (Combined Logfile Format) you can use the following directive.
- #
- #CustomLog @rel_logfiledir@/access_log combined
-</IfModule>
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of: Full | OS | Minor | Minimal | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#
-ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
-ServerSignature On
-
-<IfModule alias_module>
- #
- # Aliases: Add here as many aliases as you need (with no limit). The format is
- # Alias fakename realname
- #
- # Note that if you include a trailing / on fakename then the server will
- # require it to be present in the URL. So "/icons" isn't aliased in this
- # example, only "/icons/". If the fakename is slash-terminated, then the
- # realname must also be slash terminated, and if the fakename omits the
- # trailing slash, the realname must also omit it.
- #
- # We include the /icons/ alias for FancyIndexed directory listings. If
- # you do not use FancyIndexing, you may comment this out.
- #
- Alias /icons/ "@exp_iconsdir@/"
-
- <Directory "@exp_iconsdir@">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- #
- # This should be changed to the ServerRoot/manual/. The alias provides
- # the manual, even if you choose to move your DocumentRoot. You may
- # comment this out if you do not care for the documentation.
- #
- AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ \
- "@exp_manualdir@$1"
-
- <Directory "@exp_manualdir@">
- Options Indexes
- AllowOverride None
- Order allow,deny
- Allow from all
-
- <Files *.html>
- SetHandler type-map
- </Files>
-
- SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
- RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
- </Directory>
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the realname directory are treated as applications and
- # run by the server when requested rather than as documents sent to the
- # client. The same rules about trailing "/" apply to ScriptAlias
- # directives as to Alias.
- #
- ScriptAlias /cgi-bin/ "@exp_cgidir@/"
-
-</IfModule>
-
-<IfModule cgid_module>
- #
- # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
- # for setting UNIX socket for communicating with cgid.
- #
- #Scriptsock @rel_runtimedir@/cgisock
-</IfModule>
-
-#
-# "@exp_cgidir@" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "@exp_cgidir@">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Example:
-# Redirect permanent /foo http://www.example.com/bar
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule autoindex_module>
-
- #
- # IndexOptions: Controls the appearance of server-generated directory
- # listings.
- #
- IndexOptions FancyIndexing VersionSort
-
- #
- # AddIcon* directives tell the server which icon to show for different
- # files or filename extensions. These are only displayed for
- # FancyIndexed directories.
- #
- AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
- AddIconByType (TXT,/icons/text.gif) text/*
- AddIconByType (IMG,/icons/image2.gif) image/*
- AddIconByType (SND,/icons/sound2.gif) audio/*
- AddIconByType (VID,/icons/movie.gif) video/*
-
- AddIcon /icons/binary.gif .bin .exe
- AddIcon /icons/binhex.gif .hqx
- AddIcon /icons/tar.gif .tar
- AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
- AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
- AddIcon /icons/a.gif .ps .ai .eps
- AddIcon /icons/layout.gif .html .shtml .htm .pdf
- AddIcon /icons/text.gif .txt
- AddIcon /icons/c.gif .c
- AddIcon /icons/p.gif .pl .py
- AddIcon /icons/f.gif .for
- AddIcon /icons/dvi.gif .dvi
- AddIcon /icons/uuencoded.gif .uu
- AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
- AddIcon /icons/tex.gif .tex
- AddIcon /icons/bomb.gif core
-
- AddIcon /icons/back.gif ..
- AddIcon /icons/hand.right.gif README
- AddIcon /icons/folder.gif ^^DIRECTORY^^
- AddIcon /icons/blank.gif ^^BLANKICON^^
-
- #
- # DefaultIcon is which icon to show for files which do not have an icon
- # explicitly set.
- #
- DefaultIcon /icons/unknown.gif
-
- #
- # AddDescription allows you to place a short description after a file in
- # server-generated indexes. These are only displayed for FancyIndexed
- # directories.
- # Format: AddDescription "description" filename
- #
- #AddDescription "GZIP compressed document" .gz
- #AddDescription "tar archive" .tar
- #AddDescription "GZIP compressed tar archive" .tgz
-
- #
- # ReadmeName is the name of the README file the server will look for by
- # default, and append to directory listings.
- #
- # HeaderName is the name of a file which should be prepended to
- # directory indexes.
- ReadmeName README.html
- HeaderName HEADER.html
-
- #
- # IndexIgnore is a set of filenames which directory indexing should ignore
- # and not include in the listing. Shell-style wildcarding is permitted.
- #
- IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-</IfModule>
-
-<IfModule mime_module>
-
- #
- # AddType allows you to add to or override the MIME configuration
- # file mime.types for specific file types.
- #
- #AddType application/x-gzip .tgz
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- # Despite the name similarity, the following Add* directives have
- # nothing to do with the FancyIndexing customization directives above.
- #
- #AddEncoding x-compress .Z
- #AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- AddType application/x-compress .Z
- AddType application/x-gzip .gz .tgz
-
- #
- # DefaultLanguage and AddLanguage allows you to specify the language of
- # a document. You can then use content negotiation to give a browser a
- # file in a language the user can understand.
- #
- # Specify a default language. This means that all data
- # going out without a specific language tag (see below) will
- # be marked with this one. You probably do NOT want to set
- # this unless you are sure it is correct for all cases.
- #
- # * It is generally better to not mark a page as
- # * being a certain language than marking it with the wrong
- # * language!
- #
- # DefaultLanguage nl
- #
- # Note 1: The suffix does not have to be the same as the language
- # keyword --- those with documents in Polish (whose net-standard
- # language code is pl) may wish to use "AddLanguage pl .po" to
- # avoid the ambiguity with the common suffix for perl scripts.
- #
- # Note 2: The example entries below illustrate that in some cases
- # the two character 'Language' abbreviation is not identical to
- # the two character 'Country' code for its country,
- # E.g. 'Danmark/dk' versus 'Danish/da'.
- #
- # Note 3: In the case of 'ltz' we violate the RFC by using a three char
- # specifier. There is 'work in progress' to fix this and get
- # the reference data for rfc1766 cleaned up.
- #
- # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
- # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
- # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
- # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
- # Norwegian (no) - Polish (pl) - Portugese (pt)
- # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
- # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
- #
- AddLanguage ca .ca
- AddLanguage cs .cz .cs
- AddLanguage da .dk
- AddLanguage de .de
- AddLanguage el .el
- AddLanguage en .en
- AddLanguage eo .eo
- AddLanguage es .es
- AddLanguage et .et
- AddLanguage fr .fr
- AddLanguage he .he
- AddLanguage hr .hr
- AddLanguage it .it
- AddLanguage ja .ja
- AddLanguage ko .ko
- AddLanguage ltz .ltz
- AddLanguage nl .nl
- AddLanguage nn .nn
- AddLanguage no .no
- AddLanguage pl .po
- AddLanguage pt .pt
- AddLanguage pt-BR .pt-br
- AddLanguage ru .ru
- AddLanguage sv .sv
- AddLanguage zh-CN .zh-cn
- AddLanguage zh-TW .zh-tw
-</IfModule>
-
-<IfModule negotiation_module>
- #
- # LanguagePriority allows you to give precedence to some languages
- # in case of a tie during content negotiation.
- #
- # Just list the languages in decreasing order of preference. We have
- # more or less alphabetized them here. You probably want to change this.
- #
- LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
-
- #
- # ForceLanguagePriority allows you to serve a result page rather than
- # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
- # [in case no accepted languages matched the available variants]
- #
- ForceLanguagePriority Prefer Fallback
-
-</IfModule>
-
-<IfModule mime_module>
- #
- # Commonly used filename extensions to character sets. You probably
- # want to avoid clashes with the language extensions, unless you
- # are good at carefully testing your setup after each change.
- # See http://www.iana.org/assignments/character-sets for the
- # official list of charset names and their respective RFCs.
- #
- AddCharset us-ascii .ascii .us-ascii
- AddCharset ISO-8859-1 .iso8859-1 .latin1
- AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
- AddCharset ISO-8859-3 .iso8859-3 .latin3
- AddCharset ISO-8859-4 .iso8859-4 .latin4
- AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
- AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
- AddCharset ISO-8859-7 .iso8859-7 .grk .greek
- AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
- AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
- AddCharset ISO-8859-10 .iso8859-10 .latin6
- AddCharset ISO-8859-13 .iso8859-13
- AddCharset ISO-8859-14 .iso8859-14 .latin8
- AddCharset ISO-8859-15 .iso8859-15 .latin9
- AddCharset ISO-8859-16 .iso8859-16 .latin10
- AddCharset ISO-2022-JP .iso2022-jp .jis
- AddCharset ISO-2022-KR .iso2022-kr .kis
- AddCharset ISO-2022-CN .iso2022-cn .cis
- AddCharset Big5 .Big5 .big5 .b5
- AddCharset cn-Big5 .cn-big5
- # For russian, more than one charset is used (depends on client, mostly):
- AddCharset WINDOWS-1251 .cp-1251 .win-1251
- AddCharset CP866 .cp866
- AddCharset KOI8 .koi8
- AddCharset KOI8-E .koi8-e
- AddCharset KOI8-r .koi8-r .koi8-ru
- AddCharset KOI8-U .koi8-u
- AddCharset KOI8-ru .koi8-uk .ua
- AddCharset ISO-10646-UCS-2 .ucs2
- AddCharset ISO-10646-UCS-4 .ucs4
- AddCharset UTF-7 .utf7
- AddCharset UTF-8 .utf8
- AddCharset UTF-16 .utf16
- AddCharset UTF-16BE .utf16be
- AddCharset UTF-16LE .utf16le
- AddCharset UTF-32 .utf32
- AddCharset UTF-32BE .utf32be
- AddCharset UTF-32LE .utf32le
- AddCharset euc-cn .euc-cn
- AddCharset euc-gb .euc-gb
- AddCharset euc-jp .euc-jp
- AddCharset euc-kr .euc-kr
- #Not sure how euc-tw got in - IANA doesn't list it???
- AddCharset EUC-TW .euc-tw
- AddCharset gb2312 .gb2312 .gb
- AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
- AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
- AddCharset shift_jis .shift_jis .sjis
-
- #
- # AddHandler allows you to map certain file extensions to "handlers":
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action directive (see below)
- #
- # To use CGI scripts outside of ScriptAliased directories:
- # (You will also need to add "ExecCGI" to the "Options" directive.)
- #
- #AddHandler cgi-script .cgi
-
- #
- # For files that include their own HTTP headers:
- #
- #AddHandler send-as-is asis
-
- #
- # For server-parsed imagemap files:
- #
- #AddHandler imap-file map
-
- #
- # For type maps (negotiated resources):
- # (This is enabled by default to allow the Apache "It Worked" page
- # to be distributed in multiple languages.)
- #
- AddHandler type-map var
-
- #
- # Filters allow you to process content before it is sent to the client.
- #
- # To parse .shtml files for server-side includes (SSI):
- # (You will also need to add "Includes" to the "Options" directive.)
- #
- #AddType text/html .shtml
- #AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# Putting this all together, we can internationalize error responses.
-#
-# We use Alias to redirect any /error/HTTP_<error>.html.var response to
-# our collection of by-error message multi-language collections. We use
-# includes to substitute the appropriate text.
-#
-# You can modify the messages' appearance without changing any of the
-# default HTTP_<error>.html.var files by adding the line:
-#
-# Alias /error/include/ "/your/include/path/"
-#
-# which allows you to create your own set of files by starting with the
-# @exp_errordir@/include/ files and copying them to /your/include/path/,
-# even on a per-VirtualHost basis. The default include files will display
-# your Apache version number and your ServerAdmin email address regardless
-# of the setting of ServerSignature.
-#
-# The internationalized error documents require mod_alias, mod_include
-# and mod_negotiation. To activate them, uncomment the following 30 lines.
-
-# Alias /error/ "@exp_errordir@/"
-#
-# <Directory "@exp_errordir@">
-# AllowOverride None
-# Options IncludesNoExec
-# AddOutputFilter Includes html
-# AddHandler type-map var
-# Order allow,deny
-# Allow from all
-# LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
-# ForceLanguagePriority Prefer Fallback
-# </Directory>
-#
-# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
-# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
-# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
-# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
-# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
-# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
-# ErrorDocument 410 /error/HTTP_GONE.html.var
-# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
-# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
-# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
-# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
-# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
-# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
-# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
-# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
-# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
-# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
-
-<IfModule setenvif_module>
- #
- # The following directives modify normal HTTP response behavior to
- # handle known problems with browser implementations.
- #
- BrowserMatch "Mozilla/2" nokeepalive
- BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
- BrowserMatch "RealPlayer 4\.0" force-response-1.0
- BrowserMatch "Java/1\.0" force-response-1.0
- BrowserMatch "JDK/1\.0" force-response-1.0
-
- #
- # The following directive disables redirects on non-GET requests for
- # a directory that does not include the trailing slash. This fixes a
- # problem with Microsoft WebFolders which does not appropriately handle
- # redirects for folders with DAV methods.
- # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
- #
- BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
- BrowserMatch "^WebDrive" redirect-carefully
- BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
- BrowserMatch "^gnome-vfs/1.0" redirect-carefully
- BrowserMatch "^XML Spy" redirect-carefully
-</IfModule>
-
-<IfModule status_module>
- #
- # Allow server status reports generated by mod_status,
- # with the URL of http://servername/server-status
- # Change the ".example.com" to match your domain to enable.
- #
- #<Location /server-status>
- # SetHandler server-status
- # Order deny,allow
- # Deny from all
- # Allow from .example.com
- #</Location>
-</IfModule>
-
-<IfModule info_module>
- #
- # Allow remote server configuration reports, with the URL of
- # http://servername/server-info (requires that mod_info.c be loaded).
- # Change the ".example.com" to match your domain to enable.
- #
- #<Location /server-info>
- # SetHandler server-info
- # Order deny,allow
- # Deny from all
- # Allow from .example.com
- #</Location>
-</IfModule>
-
-#
-# Bring in additional module-specific configurations
-#
-<IfModule ssl_module>
- Include @rel_sysconfdir@/ssl.conf
-</IfModule>
-
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at
-# <URL:http://httpd.apache.org/docs-2.1/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-# ServerAdmin webmaster@dummy-host.example.com
-# DocumentRoot /www/docs/dummy-host.example.com
-# ServerName dummy-host.example.com
-# ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
-# CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
-#</VirtualHost>
--- /dev/null
+#
+# This is the main Apache HTTP server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs-2.1/> for detailed information.
+# In particular, see
+# <URL:http://httpd.apache.org/docs-2.1/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "@rel_logfiledir@/foo.log"
+# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
+# server as "@@ServerRoot@@/@rel_logfiledir@/foo.log".
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path. If you point
+# ServerRoot at a non-local disk, be sure to point the LockFile directive
+# at a local disk. If you wish to share the same ServerRoot for multiple
+# httpd daemons, you will need to change at least LockFile and PidFile.
+#
+ServerRoot "@@ServerRoot@@"
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
+#
+#Listen 12.34.56.78:80
+Listen @@Port@@
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+@@LoadModule@@
+
+<IfModule !mpm_winnt_module>
+<IfModule !mpm_netware_module>
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
+# . On HPUX you may not be able to use shared memory as nobody, and the
+# suggested workaround is to create a user www and use that user.
+# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
+# when the value of (unsigned)Group is above 60000;
+# don't use Group #-1 on these systems!
+#
+User nobody
+Group #-1
+</IfModule>
+</IfModule>
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition. These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+#
+ServerAdmin you@example.com
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+#ServerName www.example.com:80
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "@exp_htdocsdir@"
+
+#
+# Each directory to which Apache has access can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories).
+#
+# First, we configure the "default" to be a very restrictive set of
+# features.
+#
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Order deny,allow
+ Deny from all
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "@exp_htdocsdir@">
+ #
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs-2.1/mod/core.html#options
+ # for more information.
+ #
+ Options Indexes FollowSymLinks
+
+ #
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # Options FileInfo AuthConfig Limit
+ #
+ AllowOverride None
+
+ #
+ # Controls who can get stuff from this server.
+ #
+ Order allow,deny
+ Allow from all
+
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+ DirectoryIndex index.html
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<FilesMatch "^\.ht">
+ Order allow,deny
+ Deny from all
+</FilesMatch>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog @rel_logfiledir@/error_log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+<IfModule log_config_module>
+ #
+ # The following directives define some format nicknames for use with
+ # a CustomLog directive (see below).
+ #
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+ LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+ <IfModule logio_module>
+ # You need to enable mod_logio.c to use %I and %O
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+ </IfModule>
+
+ #
+ # The location and format of the access logfile (Common Logfile Format).
+ # If you do not define any access logfiles within a <VirtualHost>
+ # container, they will be logged here. Contrariwise, if you *do*
+ # define per-<VirtualHost> access logfiles, transactions will be
+ # logged therein and *not* in this file.
+ #
+ CustomLog @rel_logfiledir@/access_log common
+
+ #
+ # If you prefer a logfile with access, agent, and referer information
+ # (Combined Logfile Format) you can use the following directive.
+ #
+ #CustomLog @rel_logfiledir@/access_log combined
+</IfModule>
+
+<IfModule alias_module>
+ #
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ #
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ #
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ #
+ ScriptAlias /cgi-bin/ "@exp_cgidir@/"
+
+</IfModule>
+
+<IfModule cgid_module>
+ #
+ # ScriptSock: On threaded servers, designate the path to the UNIX
+ # socket used to communicate with the CGI daemon of mod_cgid.
+ #
+ #Scriptsock @rel_runtimedir@/cgisock
+</IfModule>
+
+#
+# "@exp_cgidir@" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "@exp_cgidir@">
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# DefaultType: the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+<IfModule mime_module>
+ #
+ # TypesConfig points to the file containing the list of mappings from
+ # filename extension to MIME-type.
+ #
+ TypesConfig @rel_sysconfdir@/mime.types
+
+ #
+ # AddType allows you to add to or override the MIME configuration
+ # file specified in TypesConfig for specific file types.
+ #
+ #AddType application/x-gzip .tgz
+ #
+ # AddEncoding allows you to have certain browsers uncompress
+ # information on the fly. Note: Not all browsers support this.
+ #
+ #AddEncoding x-compress .Z
+ #AddEncoding x-gzip .gz .tgz
+ #
+ # If the AddEncoding directives above are commented-out, then you
+ # probably should define those extensions to indicate media types:
+ #
+ AddType application/x-compress .Z
+ AddType application/x-gzip .gz .tgz
+
+ #
+ # AddHandler allows you to map certain file extensions to "handlers":
+ # actions unrelated to filetype. These can be either built into the server
+ # or added with the Action directive (see below)
+ #
+ # To use CGI scripts outside of ScriptAliased directories:
+ # (You will also need to add "ExecCGI" to the "Options" directive.)
+ #
+ #AddHandler cgi-script .cgi
+
+ # For files that include their own HTTP headers:
+ #AddHandler send-as-is asis
+
+ # For server-parsed imagemap files:
+ #AddHandler imap-file map
+
+ # For type maps (negotiated resources):
+ #AddHandler type-map var
+
+ #
+ # Filters allow you to process content before it is sent to the client.
+ #
+ # To parse .shtml files for server-side includes (SSI):
+ # (You will also need to add "Includes" to the "Options" directive.)
+ #
+ #AddType text/html .shtml
+ #AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+#MIMEMagicFile @rel_sysconfdir@/magic
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+#
+#EnableMMAP off
+#EnableSendfile off
+
+# Supplemental configuration
+#
+# The configuration files in the @rel_sysconfdir@/extra/ directory can be
+# included to add extra features or to modify the default configuration of
+# the server, or you may simply copy their contents here and change as
+# necessary.
+
+# Server-pool management (MPM specific)
+#Include @rel_sysconfdir@/extra/httpd-mpm.conf
+
+# Multi-language error messages
+#Include @rel_sysconfdir@/extra/httpd-multilang-errordoc.conf
+
+# Fancy directory listings
+#Include @rel_sysconfdir@/extra/httpd-autoindex.conf
+
+# Language settings
+#Include @rel_sysconfdir@/extra/httpd-languages.conf
+
+# User home directories
+#Include @rel_sysconfdir@/extra/httpd-userdir.conf
+
+# Real-time info on requests and configuration
+#Include @rel_sysconfdir@/extra/httpd-info.conf
+
+# Virtual hosts
+#Include @rel_sysconfdir@/extra/httpd-vhosts.conf
+
+# Local access to the Apache HTTP Server Manual
+#Include @rel_sysconfdir@/extra/httpd-manual.conf
+
+# Distributed authoring and versioning (WebDAV)
+#Include @rel_sysconfdir@/extra/httpd-dav.conf
+
+# Various default settings
+#Include @rel_sysconfdir@/extra/httpd-default.conf
+
+# Secure (SSL/TLS) connections
+#Include @rel_sysconfdir@/extra/httpd-ssl.conf
+#
+# Note: The following must must be present to support
+# starting without SSL on platforms with no /dev/random equivalent
+# but a statically compiled-in mod_ssl.
+#
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
<description>Configures how the server determines its own name and
port</description>
<syntax>UseCanonicalName On|Off|DNS</syntax>
-<default>UseCanonicalName On</default>
+<default>UseCanonicalName Off</default>
<contextlist><context>server config</context><context>virtual host</context>
<context>directory</context></contextlist>
<name>UserDir</name>
<description>Location of the user-specific directories</description>
<syntax>UserDir <em>directory-filename</em></syntax>
-<default>UserDir public_html</default>
<contextlist><context>server config</context> <context>virtual
host</context></contextlist>
the redirect earlier in the list, that will always be the alternative
that is used.</p>
+<p>User directory substitution is not active by default in versions
+2.1.4 and later. In earlier versions, <code>UserDir public_html</code>
+was assumed if no <directive module="mod_userdir">UserDir</directive>
+directive was present.</p>
+
</usage>
<seealso><a href="../howto/public_html.html">public_html
#endif
-/* The default directory in user's home dir */
+/*
+ * The default directory in user's home dir
+ * In the default install, the module is disabled
+ */
#ifndef DEFAULT_USER_DIR
-#define DEFAULT_USER_DIR "public_html"
+#define DEFAULT_USER_DIR NULL
#endif
module AP_MODULE_DECLARE_DATA userdir_module;
d = (core_dir_config *)ap_get_module_config(r->per_dir_config,
&core_module);
- if (d->use_canonical_name == USE_CANONICAL_NAME_OFF) {
- return r->hostname ? r->hostname : r->server->server_hostname;
+ if (d->use_canonical_name == USE_CANONICAL_NAME_ON) {
+ return r->server->server_hostname;
}
if (d->use_canonical_name == USE_CANONICAL_NAME_DNS) {
}
/* default */
- return r->server->server_hostname;
+ return r->hostname ? r->hostname : r->server->server_hostname;
}
/*
ERROR=$?
;;
startssl|sslstart|start-SSL)
- $HTTPD -k start -DSSL
- ERROR=$?
+ echo The startssl option is no longer supported.
+ echo Please edit httpd.conf to include the SSL configuration settings
+ echo and then use "apachectl start".
+ ERROR=2
;;
configtest)
$HTTPD -t
projects / thirdparty / apache / httpd.git / commitdiff
