]> git.ipfire.org Git - thirdparty/kernel/stable.git/commitdiff
ath9k_hw: fix stopping rx DMA during resets
authorFelix Fietkau <nbd@openwrt.org>
Fri, 8 Apr 2011 18:13:18 +0000 (20:13 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 2 May 2011 16:19:32 +0000 (09:19 -0700)
commit 5882da02e9d9089b7e8c739f3e774aaeeff8b7ba upstream.

During PHY errors, the MAC can sometimes fail to enter an idle state on older
hardware (before AR9380) after an rx stop has been requested.

This typically shows up in the kernel log with messages like these:

ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
------------[ cut here ]------------
WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]()
Call Trace:
[<8023f0e8>] dump_stack+0x8/0x34
[<80075050>] warn_slowpath_common+0x78/0xa4
[<80075094>] warn_slowpath_null+0x18/0x24
[<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k]
[<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k]
[<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k]

When this happens, the state that the MAC enters is easy to identify and
does not result in bogus DMA traffic, however to ensure a working state
after a channel change, the hardware should still be reset.

This patch adds detection for this specific MAC state, after which the above
warnings completely disappear in my tests.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/net/wireless/ath/ath9k/hw.c
drivers/net/wireless/ath/ath9k/mac.c
drivers/net/wireless/ath/ath9k/mac.h
drivers/net/wireless/ath/ath9k/recv.c

index 7c0a7c48eea3b92f6b2d6cb593927780afe3bc49..a3b77ae3827c200f0e2f32a58d689dc25cc9658d 100644 (file)
@@ -1218,15 +1218,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
        ah->txchainmask = common->tx_chainmask;
        ah->rxchainmask = common->rx_chainmask;
 
-       if ((common->bus_ops->ath_bus_type != ATH_USB) && !ah->chip_fullsleep) {
-               ath9k_hw_abortpcurecv(ah);
-               if (!ath9k_hw_stopdmarecv(ah)) {
-                       ath_dbg(common, ATH_DBG_XMIT,
-                               "Failed to stop receive dma\n");
-                       bChannelChange = false;
-               }
-       }
-
        if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
                return -EIO;
 
index 2915b11edefb915ca89321a7e2a349e1f525dcf6..76d1f8c7db376afd0fcc32e2bca7f9eb91ac7737 100644 (file)
@@ -770,28 +770,47 @@ void ath9k_hw_abortpcurecv(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_abortpcurecv);
 
-bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
+bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset)
 {
 #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
 #define AH_RX_TIME_QUANTUM     100     /* usec */
        struct ath_common *common = ath9k_hw_common(ah);
+       u32 mac_status, last_mac_status = 0;
        int i;
 
+       /* Enable access to the DMA observation bus */
+       REG_WRITE(ah, AR_MACMISC,
+                 ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
+                  (AR_MACMISC_MISC_OBS_BUS_1 <<
+                   AR_MACMISC_MISC_OBS_BUS_MSB_S)));
+
        REG_WRITE(ah, AR_CR, AR_CR_RXD);
 
        /* Wait for rx enable bit to go low */
        for (i = AH_RX_STOP_DMA_TIMEOUT / AH_TIME_QUANTUM; i != 0; i--) {
                if ((REG_READ(ah, AR_CR) & AR_CR_RXE) == 0)
                        break;
+
+               if (!AR_SREV_9300_20_OR_LATER(ah)) {
+                       mac_status = REG_READ(ah, AR_DMADBG_7) & 0x7f0;
+                       if (mac_status == 0x1c0 && mac_status == last_mac_status) {
+                               *reset = true;
+                               break;
+                       }
+
+                       last_mac_status = mac_status;
+               }
+
                udelay(AH_TIME_QUANTUM);
        }
 
        if (i == 0) {
                ath_err(common,
-                       "DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+                       "DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n",
                        AH_RX_STOP_DMA_TIMEOUT / 1000,
                        REG_READ(ah, AR_CR),
-                       REG_READ(ah, AR_DIAG_SW));
+                       REG_READ(ah, AR_DIAG_SW),
+                       REG_READ(ah, AR_DMADBG_7));
                return false;
        } else {
                return true;
index 7512f97e8f49a07839551833db8ca9206e6a02fc..d9cc2996107e97aa56cee2e9e1e36a60052077d4 100644 (file)
@@ -692,7 +692,7 @@ bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set);
 void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp);
 void ath9k_hw_startpcureceive(struct ath_hw *ah, bool is_scanning);
 void ath9k_hw_abortpcurecv(struct ath_hw *ah);
-bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
+bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset);
 int ath9k_hw_beaconq_setup(struct ath_hw *ah);
 
 /* Interrupt Handling */
index 3867a2e8de39c92b1bc1fac7150506290d649e6c..89546bc30290643afcf4260393170894dee84860 100644 (file)
@@ -513,12 +513,12 @@ start_recv:
 bool ath_stoprecv(struct ath_softc *sc)
 {
        struct ath_hw *ah = sc->sc_ah;
-       bool stopped;
+       bool stopped, reset = false;
 
        spin_lock_bh(&sc->rx.rxbuflock);
        ath9k_hw_abortpcurecv(ah);
        ath9k_hw_setrxfilter(ah, 0);
-       stopped = ath9k_hw_stopdmarecv(ah);
+       stopped = ath9k_hw_stopdmarecv(ah, &reset);
 
        if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
                ath_edma_stop_recv(sc);
@@ -533,7 +533,7 @@ bool ath_stoprecv(struct ath_softc *sc)
                        "confusing the DMA engine when we start RX up\n");
                ATH_DBG_WARN_ON_ONCE(!stopped);
        }
-       return stopped;
+       return stopped || reset;
 }
 
 void ath_flushrecv(struct ath_softc *sc)