--- /dev/null
+#
+# Copyright (c) 2000 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like. Any license provided herein, whether implied or
+# otherwise, applies only to this software file. Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+# Mountain View, CA 94043, or:
+#
+# http://www.sgi.com
+#
+# For further information regarding this notice, see:
+#
+# http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
+#
+
+TOPDIR = .
+HAVE_BUILDDEFS = $(shell test -f $(TOPDIR)/include/builddefs && echo yes || echo no)
+
+ifeq ($(HAVE_BUILDDEFS), yes)
+include $(TOPDIR)/include/builddefs
+endif
+
+CONFIGURE = configure include/builddefs include/platform_defs.h
+LSRCFILES = configure configure.in Makepkgs install-sh README VERSION
+LDIRT = config.* conftest* Logs/* built install.* install-dev.* *.gz
+
+SUBDIRS = include libxfs libhandle \
+ bmap db fsck growfs logprint mkfile mkfs repair \
+ man doc debian build
+
+default: $(CONFIGURE)
+ifeq ($(HAVE_BUILDDEFS), no)
+ $(MAKE) -C . $@
+else
+ $(SUBDIRS_MAKERULE)
+endif
+
+ifeq ($(HAVE_BUILDDEFS), yes)
+include $(BUILDRULES)
+else
+clean: # if configure hasn't run, nothing to clean
+endif
+
+$(CONFIGURE): configure.in include/builddefs.in VERSION
+ rm -f config.cache
+ autoconf
+ ./configure
+
+install: default
+ $(SUBDIRS_MAKERULE)
+ $(INSTALL) -m 755 -d $(PKG_DOC_DIR)
+ $(INSTALL) -m 644 README $(PKG_DOC_DIR)
+
+install-dev: default
+ $(SUBDIRS_MAKERULE)
+
+realclean distclean: clean
+ rm -f $(LDIRT) $(CONFIGURE)
+ [ ! -d Logs ] || rmdir Logs
--- /dev/null
+#! /bin/sh
+#
+# Make whichever packages the system supports
+#
+LOGDIR=Logs
+
+clean=false
+debian=false
+verbose=false
+
+MAKE=${MAKE:-make}
+test ! -z "$MAKE" && make=$MAKE
+
+for opt in $*
+do
+ case "$opt" in
+ clean)
+ clean=true
+ ;;
+ debian)
+ debian=true
+ ;;
+ verbose)
+ verbose=true
+ ;;
+ *)
+ echo "Usage: Makepkgs [clean] [verbose] [debian]"
+ exit 1
+ ;;
+ esac
+done
+
+# start with a clean manifest
+test -f files.rpm && rm -f files.rpm
+test -f filesdevel.rpm && rm -f filesdevel.rpm
+
+test ! -d $LOGDIR && mkdir $LOGDIR
+rm -rf $LOGDIR/* > /dev/null 2>&1
+
+if $clean ; then
+ echo "== clean, log is $LOGDIR/clean"
+ if $verbose ; then
+ $MAKE clean 2>&1 | tee $LOGDIR/clean
+ else
+ $MAKE clean > $LOGDIR/clean 2>&1
+ fi
+ if [ $? -ne 0 ] ; then
+ echo \"$MAKE clean\" failed, see log in $LOGDIR/clean
+ tail $LOGDIR/clean
+ exit 1
+ fi
+fi
+
+SUDO=${SUDO:-sudo}
+test ! -z "$SUDO" && sudo=$SUDO
+if $debian ; then
+ echo
+ echo "== Debian build, log is $LOGDIR/debian"
+ if $verbose ; then
+ exec dpkg-buildpackage -r$SUDO | tee $LOGDIR/debian
+ else
+ exec dpkg-buildpackage -r$SUDO > $LOGDIR/debian
+ fi
+fi
+
+echo
+echo "== configure, log is $LOGDIR/configure"
+if $verbose ; then
+ autoconf 2>&1 | tee $LOGDIR/configure
+ ./configure 2>&1 | tee -a $LOGDIR/configure
+else
+ autoconf > $LOGDIR/configure 2>&1
+ ./configure >> $LOGDIR/configure 2>&1
+fi
+if [ $? -ne 0 ] ; then
+ echo \"configure\" failed, see log in $LOGDIR/configure
+ tail $LOGDIR/configure
+ exit 1
+fi
+
+echo
+echo "== default, log is $LOGDIR/default"
+if $verbose ; then
+ $MAKE default 2>&1 | tee $LOGDIR/default
+else
+ $MAKE default > $LOGDIR/default 2>&1
+fi
+if [ $? -ne 0 ] ; then
+ echo \"$MAKE default\" failed, see log in $LOGDIR/default
+ tail $LOGDIR/default
+ exit 1
+fi
+
+echo
+echo "== dist, log is $LOGDIR/dist"
+[ ! -f .census ] && touch .census
+if $verbose ; then
+ $MAKE -C build dist 2>&1 | tee $LOGDIR/dist
+else
+ $MAKE -C build dist > $LOGDIR/dist 2>&1
+fi
+if [ $? -ne 0 ] ; then
+ echo $MAKE dist failed, see log in $LOGDIR/dist
+ tail $LOGDIR/dist
+ exit 1
+else
+ grep '^Wrote:' $LOGDIR/dist | sed -e 's/\.\.\/\.\.\///'
+fi
+
+exit 0
--- /dev/null
+XFS User Tools README
+_____________________
+
+See the file doc/INSTALL for build, installation and post-
+install configuration steps.
+
+Refer to the xfs(5) manual page for general XFS information
+and references to other XFS manual pages.
+
+For more information and details on how to contribute to the
+XFS project see the web pages at:
+ http://oss.sgi.com/projects/xfs/
+
+For more information on the build process, please refer to
+the doc/PORTING document.
--- /dev/null
+#
+# This file is used by configure to get version information
+#
+PKG_MAJOR=1
+PKG_MINOR=1
+PKG_REVISION=0
+PKG_BUILD=0
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_BIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_BIN_DIR)
+install-dev:
include $(TOPDIR)/include/builddefs
MANIFEST=src-manifest
-SRCTAR=$(PACKAGE_NAME)-$(PACKAGE_VERSION).src.tar.gz
-SRCTAR2=$(PACKAGE_NAME)_$(PACKAGE_VERSION).orig.tar.gz
+SRCTAR=$(PKG_NAME)-$(PKG_VERSION).src.tar.gz
-LDIRT = $(MANIFEST) $(SRCTAR) $(SRCTAR2) bin-manifest $(TOPDIR)/$(PACKAGE_NAME)-$(PACKAGE_VERSION)
+LDIRT = $(MANIFEST) $(SRCTAR) bin-manifest $(TOPDIR)/$(PKG_NAME)-$(PKG_VERSION)
# for clean and clobber
-SUBDIRS = tar rpm deb
+SUBDIRS = tar rpm
# nothing to build here (it's all packaging)
-default install :
+default install install-dev :
include $(BUILDRULES)
# Symlink in the TOPDIR is used to pack files relative to
# product-version directory.
$(MANIFEST) : $(_FORCE)
- @if [ ! -L $(TOPDIR)/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ] ; then \
- $(LN_S) . $(TOPDIR)/$(PACKAGE_NAME)-$(PACKAGE_VERSION) ; \
+ @if [ ! -L $(TOPDIR)/$(PKG_NAME)-$(PKG_VERSION) ] ; then \
+ $(LN_S) . $(TOPDIR)/$(PKG_NAME)-$(PKG_VERSION) ; \
fi
@CDIR=`pwd`; cd $(TOPDIR); \
$(MAKE) --no-print-directory source | \
- sed -e 's/^\./$(PACKAGE_NAME)-$(PACKAGE_VERSION)/' > $$CDIR/$@ ;\
- if [ $$? -ne 0 ] ; then \
+ sed -e 's/^\./$(PKG_NAME)-$(PKG_VERSION)/' > $$CDIR/$@ ;\
+ if [ $$? -ne 0 ] ; then \
exit 1; \
else \
unset TAPE; \
$(TAR) -T $$CDIR/$@ -cf - | $(ZIP) --best > $$CDIR/$(SRCTAR); \
- $(LN_S) $$CDIR/$(SRCTAR) $$CDIR/$(SRCTAR2); \
fi
dist : default $(MANIFEST)
TREEROOT = $(shell cd ${TOPDIR}; pwd)
include $(TOPDIR)/include/builddefs
-SPECF = xfs-cmds.spec
-
-LDIRT = $(PACKAGE_NAME)-$(PACKAGE_VERSION)-[0-9]*.*.rpm $(SPECF) \
- rpmmacros rpm-$(RPM_VERSION).rc
+SPECF = $(PKG_NAME).spec
+LDIRT = $(PKG_NAME)*.rpm $(SPECF) rpmmacros rpm-*.rc $(TOPDIR)/files*.rpm
LSRCFILES = macros.template $(SPECF).in rpm-2.rc.template
-default install :
+default install install-dev :
include $(BUILDRULES)
.PHONY: $(SPECF)
${SPECF} : ${SPECF}.in
- sed -e's|@package_name@|$(PACKAGE_NAME)|g' \
- -e's|@package_version@|$(PACKAGE_VERSION)|g' \
- -e's|@package_release@|$(PACKAGE_RELEASE)|g' \
- -e's|@package_distribution@|$(PACKAGE_DISTRIBUTION)|g' \
- -e's|@package_builder@|$(PACKAGE_BUILDER)|g' \
+ sed -e's|@pkg_name@|$(PKG_NAME)|g' \
+ -e's|@pkg_version@|$(PKG_VERSION)|g' \
+ -e's|@pkg_release@|$(PKG_RELEASE)|g' \
+ -e's|@pkg_distribution@|$(PKG_DISTRIBUTION)|g' \
+ -e's|@pkg_builder@|$(PKG_BUILDER)|g' \
-e's|@build_root@|$(DIST_ROOT)|g' \
-e'/^BuildRoot: *$$/d' \
- -e's|@xfs_cmds_var_dir@|$(XFS_CMDS_VAR_DIR)|g' \
- -e's|@xfs_cmds_share_dir@|$(XFS_CMDS_SHARE_DIR)|g' \
- -e's|@xfs_cmds_log_dir@|$(XFS_CMDS_LOG_DIR)|g' \
- -e's|@xfs_cmds_tmp_dir@|$(XFS_CMDS_TMP_DIR)|g' \
+ -e's|@pkg_var_dir@|$(PKG_VAR_DIR)|g' \
+ -e's|@pkg_share_dir@|$(PKG_SHARE_DIR)|g' \
+ -e's|@pkg_log_dir@|$(PKG_LOG_DIR)|g' \
+ -e's|@pkg_tmp_dir@|$(PKG_TMP_DIR)|g' \
-e's|@make@|$(MAKE)|g' < $< > $@
--- /dev/null
+Summary: Utilities for managing the XFS filesystem.
+Name: @pkg_name@
+Version: @pkg_version@
+Release: @pkg_release@
+Distribution: @pkg_distribution@
+Packager: @pkg_builder@
+BuildRoot: @build_root@
+Conflicts: xfs-cmds
+Prereq: /sbin/ldconfig
+Source: @pkg_name@-@pkg_version@.src.tar.gz
+Copyright: Copyright (C) 2000 Silicon Graphics, Inc.
+Vendor: Silicon Graphics, Inc.
+URL: http://oss.sgi.com/projects/xfs/
+Group: System Environment/Base
+
+%description
+A set of commands to use the XFS file system, including mkfs.xfs.
+
+XFS is a high performance journalled filesystem which originated
+on the SGI IRIX platform. It is completely multi-threaded, can
+support large files and large filesystems, extended attributes,
+variable block sizes, is extent based, and makes extensive use of
+Btrees (directories, extents, free space) to aid both performance
+and scalability.
+
+Refer to the documentation at http://oss.sgi.com/projects/xfs/
+for complete details. This implementation is on-disk compatible
+with the IRIX version of XFS.
+
+%package devel
+Summary: XFS filesystem-specific static libraries and headers.
+Group: Development/Libraries
+Requires: @pkg_name@
+Conflicts: xfs-cmds
+
+%description devel
+xfsprogs-devel contains the libraries and header files needed to
+develop XFS filesystem-specific programs.
+
+You should install xfsprogs-devel if you want to develop XFS
+filesystem-specific programs, If you install xfsprogs-devel, you'll
+also want to install xfsprogs.
+
+# If .census exists, then no setup is necessary, just go and do the build,
+# otherwise run setup
+%prep
+if [ -f .census ] ; then
+ if [ ! -d ${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION} ] ; then
+ ln -s . ${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION}
+ fi
+else
+%setup
+touch .census
+./configure
+fi
+
+%build
+@make@
+
+%install
+DIST_ROOT="$RPM_BUILD_ROOT"
+DIST_INSTALL=`pwd`/install.manifest
+DIST_INSTALL_DEV=`pwd`/install-dev.manifest
+export DIST_ROOT DIST_INSTALL DIST_INSTALL_DEV
+@make@ install DIST_MANIFEST="$DIST_INSTALL"
+@make@ install-dev DIST_MANIFEST="$DIST_INSTALL_DEV"
+files()
+{
+ sort | uniq | awk '
+$1 == "d" { printf ("%%%%dir %%%%attr(%s,%s,%s) %s\n", $2, $3, $4, $5); }
+$1 == "f" { if (match ($6, "@pkg_man_dir@") || match ($6, "@pkg_doc_dir@")) {
+ printf ("%%%%doc ");
+ }
+ printf ("%%%%attr(%s,%s,%s) %s\n", $2, $3, $4, $6); }
+$1 == "l" { print "%attr(0777,root,root)", $3; }'
+}
+set +x
+files < "$DIST_INSTALL" > files.rpm
+files < "$DIST_INSTALL_DEV" > filesdevel.rpm
+set -x
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+%files -f files.rpm
+
+%files devel -f filesdevel.rpm
TOPDIR = ../..
include $(TOPDIR)/include/builddefs
-BINTAR=$(PACKAGE_NAME)-$(PACKAGE_VERSION).tar.gz
+BINTAR=$(PKG_NAME)-$(PKG_VERSION).tar.gz
LDIRT = $(BINTAR)
-default install :
+default install install-dev :
include $(BUILDRULES)
--- /dev/null
+dnl unpacking check - this file must exist
+AC_INIT(include/libxfs.h)
+pkg_name="xfsprogs"
+AC_SUBST(pkg_name)
+
+#
+# Note: the following environment variables may be set to override the
+# defaults (to change paths and/or executables, build parameters, etc):
+#
+# DEBUG OPTIMIZER MAKE CC LD TAR ZIP RPM AWK SED ECHO
+# MALLOCLIB DISTRIBUTION PACKAGE_BUILDER PREFIX ROOT_PREFIX
+#
+
+DEBUG=${DEBUG:-'-DDEBUG'} # -DNDEBUG
+OPTIMIZER=${OPTIMIZER:-'-g'} # -O2
+MALLOCLIB=${MALLOCLIB:-''} # /usr/lib/libefence.a
+
+dnl Debug build?
+debug_build="$DEBUG"
+AC_SUBST(debug_build)
+
+dnl Optimization options?
+opt_build="$OPTIMIZER"
+AC_SUBST(opt_build)
+
+dnl Alternate malloc library?
+malloc_lib="$MALLOCLIB"
+AC_SUBST(malloc_lib)
+
+dnl Set version
+. VERSION
+
+pkg_version=${PKG_MAJOR}.${PKG_MINOR}.${PKG_REVISION}
+pkg_release=$PKG_BUILD
+AC_SUBST(pkg_version)
+AC_SUBST(pkg_release)
+
+pkg_distribution="SGI ProPack"
+test -z "$DISTRIBUTION" || pkg_distribution="$DISTRIBUTION"
+AC_SUBST(pkg_distribution)
+
+pkg_builder=`id -u -n`@`hostname -f`
+test -z "$PACKAGE_BUILDER" || pkg_builder="$PACKAGE_BUILDER"
+AC_SUBST(pkg_builder)
+
+
+dnl output header with cpp defs HAVE_*, etc
+AC_CONFIG_HEADER(include/platform_defs.h)
+
+dnl check if user wants their own C compiler
+test -z "$CC" && AC_PROG_CC
+cc=$CC
+AC_SUBST(cc)
+
+dnl check if users wants their own make
+test -z "$MAKE" && AC_PATH_PROG(MAKE, make, /usr/bin/make)
+make=$MAKE
+AC_SUBST(make)
+
+dnl check if users wants their own linker
+test -z "$LD" && AC_PATH_PROG(LD, ld, /usr/bin/ld)
+ld=$LD
+AC_SUBST(ld)
+
+dnl check if the tar program is available
+test -z "$TAR" && AC_PATH_PROG(TAR, tar)
+tar=$TAR
+AC_SUBST(tar)
+
+dnl check if the gzip program is available
+test -z "$ZIP" && AC_PATH_PROG(ZIP, gzip, /bin/gzip)
+zip=$ZIP
+AC_SUBST(zip)
+
+dnl check if the rpm program is available
+test -z "$RPM" && AC_PATH_PROG(RPM, rpm, /bin/rpm)
+rpm=$RPM
+AC_SUBST(rpm)
+
+dnl .. and what version is rpm
+rpm_version=0
+test -x $RPM && \
+ rpm_version=`$RPM --version | awk '{print $NF}' | awk -F. '{print $1}'`
+AC_SUBST(rpm_version)
+
+dnl check if the makedepend program is available
+test -z "$MAKEDEPEND" && AC_PATH_PROG(MAKEDEPEND, makedepend, /bin/true)
+makedepend=$MAKEDEPEND
+AC_SUBST(makedepend)
+
+dnl check if symbolic links are supported
+AC_PROG_LN_S
+
+dnl check if user wants their own awk, sed and echo
+test -z "$AWK" && AC_PATH_PROG(AWK, awk, /bin/awk)
+awk=$AWK
+AC_SUBST(awk)
+test -z "$SED" && AC_PATH_PROG(SED, sed, /bin/sed)
+sed=$SED
+AC_SUBST(sed)
+test -z "$ECHO" && AC_PATH_PROG(ECHO, echo, /bin/echo)
+echo=$ECHO
+AC_SUBST(echo)
+
+dnl Checks for libraries.
+AC_CHECK_LIB(uuid, uuid_generate,,[
+ echo
+ echo "FATAL ERROR: could not find a valid UUID library."
+ echo "Install either the e2fsprogs-devel (rpm) or the uuid-dev (deb) package."
+ exit 1
+])
+
+dnl Checks for LVM library
+AC_MSG_CHECKING([for liblvm.a])
+liblvm=""
+for dir in /usr/local/lib /usr/lib /lib; do
+ if test -f $dir/liblvm.a; then
+ liblvm=$dir/liblvm.a
+ fi
+done
+if test -n "$liblvm"; then
+ AC_MSG_RESULT(yes)
+ have_liblvm=1
+else
+ AC_MSG_RESULT(no)
+ have_liblvm=0
+fi
+AC_SUBST(liblvm)
+AC_SUBST(have_liblvm)
+
+dnl Check if we have a type for the pointer's size integer (__psint_t)
+AC_MSG_CHECKING([for __psint_t ])
+AC_TRY_COMPILE(
+[
+ #include <sys/types.h>
+ #include <stdlib.h>
+ #include <stddef.h>
+],
+[
+ __psint_t psint;
+], AC_DEFINE(HAVE___PSINT_T) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
+
+dnl Check if we have a type for the pointer's size unsigned (__psunsigned_t)
+AC_MSG_CHECKING([for __psunsigned_t ])
+AC_TRY_COMPILE(
+[
+ #include <sys/types.h>
+ #include <stdlib.h>
+ #include <stddef.h>
+],
+[
+ __psunsigned_t psuint;
+], AC_DEFINE(HAVE___PSUNSIGNED_T) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
+
+
+dnl check sizeof long
+AC_MSG_CHECKING([sizeof long])
+cat <<End-of-File >conftest.c
+#include <stdio.h>
+main() { printf("%d\n", sizeof(long)); }
+End-of-File
+(eval $ac_compile) 2>&5
+(eval $ac_link) 2>&5
+ans=`./conftest`
+echo "./conftest -> \"$ans\"" >&5
+AC_MSG_RESULT($ans)
+test $ans -eq 4 && AC_DEFINE(HAVE_32BIT_LONG)
+test $ans -eq 8 && AC_DEFINE(HAVE_64BIT_LONG)
+rm -f conftest conftest.*
+
+dnl check sizeof pointer
+AC_MSG_CHECKING([sizeof pointer])
+cat <<End-of-File >conftest.c
+#include <stdio.h>
+main() { printf("%d\n", sizeof(char *)); }
+End-of-File
+(eval $ac_compile) 2>&5
+(eval $ac_link) 2>&5
+ans=`./conftest`
+echo "./conftest -> \"$ans\"" >&5
+AC_MSG_RESULT($ans)
+test $ans -eq 4 && AC_DEFINE(HAVE_32BIT_PTR)
+test $ans -eq 8 && AC_DEFINE(HAVE_64BIT_PTR)
+rm -f conftest conftest.*
+
+
+dnl alternate root and usr prefixes
+test -z "$ROOT_PREFIX" && ROOT_PREFIX=""
+root_prefix="$ROOT_PREFIX"
+test -z "$PREFIX" && PREFIX="/usr"
+prefix="$PREFIX"
+
+dnl man pages (source)
+dnl also check if man page source is gzipped
+dnl (usually on Debian, but not Redhat pre-7.0)
+have_zipped_manpages=false
+for d in ${prefix}/share/man ${prefix}/man ; do
+ if test -f $d/man1/man.1.gz
+ then
+ pkg_man_dir=$d
+ have_zipped_manpages=true
+ break
+ fi
+done
+AC_SUBST(pkg_man_dir)
+AC_SUBST(have_zipped_manpages)
+
+dnl binaries
+pkg_bin_dir=${prefix}/sbin
+AC_SUBST(pkg_bin_dir)
+
+dnl static libraries
+pkg_lib_dir=${prefix}/lib
+AC_SUBST(pkg_lib_dir)
+
+dnl runtime shared system libraries
+pkg_slib_dir=${root_prefix}/lib
+AC_SUBST(pkg_slib_dir)
+
+dnl system binaries
+pkg_sbin_dir=${root_prefix}/sbin
+AC_SUBST(pkg_sbin_dir)
+
+dnl include files
+pkg_inc_dir=${prefix}/include/xfs
+AC_SUBST(pkg_inc_dir)
+
+dnl doc directory
+pkg_doc_dir=${prefix}/share/doc/${pkg_name}
+AC_SUBST(pkg_doc_dir)
+
+
+dnl
+dnl output files
+dnl
+
+AC_OUTPUT( \
+dnl Build definitions for use in Makefiles
+ include/builddefs \
+)
include $(TOPDIR)/include/builddefs
CMDTARGET = xfs_db
-CMDDEPS = $(LIBXFS)
HFILES = addr.h agf.h agfl.h agi.h attr.h attrshort.h bit.h block.h bmap.h \
bmapbt.h bmroot.h bnobt.h check.h cntbt.h command.h convert.h data.h \
CFILES = $(HFILES:.h=.c) main.c
LSRCFILES = xfs_admin.sh xfs_check.sh xfs_ncheck.sh
LLDLIBS = $(LIBXFS) $(LIBUUID)
+LLDFLAGS = -L$(TOPDIR)/libxfs
default: $(CMDTARGET)
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 xfs_admin.sh $(XFS_CMDS_BIN_DIR)/xfs_admin
- $(INSTALL) -m 755 xfs_check.sh $(XFS_CMDS_BIN_DIR)/xfs_check
- $(INSTALL) -m 755 xfs_ncheck.sh $(XFS_CMDS_BIN_DIR)/xfs_ncheck
+ $(INSTALL) -m 755 -d $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 xfs_admin.sh $(PKG_BIN_DIR)/xfs_admin
+ $(INSTALL) -m 755 xfs_check.sh $(PKG_BIN_DIR)/xfs_check
+ $(INSTALL) -m 755 xfs_ncheck.sh $(PKG_BIN_DIR)/xfs_ncheck
+install-dev:
#include <libxfs.h>
#include <signal.h>
-#include <string.h>
#include "command.h"
#include "data.h"
#include "input.h"
--- /dev/null
+#
+# Copyright (c) 2000 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like. Any license provided herein, whether implied or
+# otherwise, applies only to this software file. Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+# Mountain View, CA 94043, or:
+#
+# http://www.sgi.com
+#
+# For further information regarding this notice, see:
+#
+# http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
+#
+
+TOPDIR = ..
+include $(TOPDIR)/include/builddefs
+
+LSRCFILES = changelog control copyright rules
+
+default install install-dev:
+
+include $(BUILDRULES)
--- /dev/null
+xfsprogs (1.1.0) unstable; urgency=low
+
+ * Initial release.
+
+ -- Nathan Scott <nathans@debian.org> Thu, 4 Jan 2001 11:15:11 -0500
+
+Local variables:
+mode: debian-changelog
+End:
--- /dev/null
+Source: xfsprogs
+Section: admin
+Priority: optional
+Maintainer: Nathan Scott <nathans@debian.org>
+Build-Depends: uuid-dev, autoconf, debmake
+Standards-Version: 3.1.1
+
+Package: xfsprogs
+Depends: ${shlibs:Depends}
+Architecture: any
+Description: Utilities for managing the XFS filesystem
+ A set of commands to use the XFS file system, including mkfs.xfs.
+ .
+ XFS is a high performance journalled filesystem which originated
+ on the SGI IRIX platform. It is completely multi-threaded, can
+ support large files and large filesystems, extended attributes,
+ variable block sizes, is extent based, and makes extensive use of
+ Btrees (directories, extents, free space) to aid both performance
+ and scalability.
+ .
+ Refer to the documentation at http://oss.sgi.com/projects/xfs/
+ for complete details. This implementation is on-disk compatible
+ with the IRIX version of XFS.
+
+Package: xfslibs-dev
+Section: devel
+Priority: extra
+Depends: libc6-dev, xfsprogs
+Architecture: any
+Description: XFS filesystem-specific static libraries and headers.
+ xfslibs-dev contains the libraries and header files needed to
+ develop XFS filesystem-specific programs.
+
--- /dev/null
+This package was debianized by Nathan Scott nathans@debian.org on
+Sun, 19 Nov 2000 07:37:09 -0500.
+
+It can be downloaded from ftp://oss.sgi.com/projects/xfs/download/
+
+Copyright:
+
+Copyright (C) 2000 Silicon Graphics, Inc.
+
+You are free to distribute this software under the terms of
+the GNU General Public License.
+On Debian systems, the complete text of the GNU General Public
+License can be found in /usr/share/common-licenses/GPL file.
+
--- /dev/null
+#!/usr/bin/make -f
+
+package = xfsprogs
+develop = xfslibs-dev
+
+dirtmp = debian/tmp
+dirdev = debian/$(develop)
+doctmp = /usr/share/doc/$(package)
+docdev = /usr/share/doc/$(develop)
+pkgtmp = DIST_ROOT=`pwd`/$(dirtmp); export DIST_ROOT;
+pkgdev = DIST_ROOT=`pwd`/$(dirdev); export DIST_ROOT;
+stdenv = GZIP=-q; export GZIP;
+
+options = DEBUG="-DNDEBUG"; OPTIMIZER="-O2 -g"; export DEBUG OPTIMIZER;
+checkdir = test -f debian/rules
+
+build: built
+built:
+ @echo "== dpkg-buildpackage: build" 1>&2
+ $(checkdir)
+ autoconf
+ $(options) ./configure
+ $(MAKE) default
+ touch built
+
+clean:
+ @echo "== dpkg-buildpackage: clean" 1>&2
+ $(checkdir)
+ -rm -f built
+ $(MAKE) distclean
+ -rm -rf $(dirtmp) $(dirdev) debian/*substvars debian/files*
+
+binary-indep:
+
+binary-arch: checkroot built
+ @echo "== dpkg-buildpackage: binary-arch" 1>&2
+ $(checkdir)
+ -rm -rf $(dirtmp) $(dirdev)
+ $(pkgtmp) $(MAKE) -C . install
+ $(pkgdev) $(MAKE) -C . install-dev
+ $(pkgtmp) $(MAKE) -C build src-manifest
+ $(pkgdev) ./install-sh -m 755 -d $(doctmp)
+ $(pkgdev) ./install-sh -m 755 -d $(docdev)
+ $(pkgdev) ./install-sh -m 644 debian/copyright $(docdev)
+ $(pkgdev) ./install-sh -m 644 debian/changelog $(docdev)
+ @echo "== dpkg-buildpackage: debstd" 1>&2
+ $(stdenv) debstd -m
+ dpkg-gencontrol -isp -p$(package) -P$(dirtmp)
+ dpkg-gencontrol -isp -p$(develop) -P$(dirdev)
+ chown -R root.root $(dirtmp) $(dirdev)
+ chmod -R go=rX $(dirtmp) $(dirdev)
+ dpkg --build $(dirtmp) ..
+ dpkg --build $(dirdev) ..
+
+binary: binary-indep binary-arch
+
+checkroot:
+ test 0 -eq `id -u`
+
+.PHONY: binary binary-arch binary-indep clean checkroot
--- /dev/null
+
+xfsprogs-1.1.0 (15 January 2001)
+ - rework xfs-cmds package into base, devel and dump packages
+ - completed Debian packaging
+ - late beta code
+
+xfs-cmds-1.0.7 (02 January 2001)
+ - added mkfs support for extracting LVM stripe unit/width
+ - libattr (*experimental* extended attributes interface) added
+ - removed xfs_fstab.5 man page (merged into mount.8)
+ - install xfs_repair into /sbin, not /usr/sbin
+
+xfs-cmds-1.0.6 (04 October 2000)
+ - reworked external log format to be IRIX compatible
+ - mkfs, repair, db, logprint now work with new format
+ - xfs_admin added for setting filesystem label
+
+xfs-cmds-1.0.5 (18 September 2000)
+ - minor bug fixes
+ - first beta release
+
+xfs-cmds-1.0.4 (18 August 2000)
+ - minor bug fixes
+ - xfs_growfs added
+ - xfs_info added
+ - late alpha code
+
+xfs-cmds-1.0.3 (16 August 2000)
+ - numerous bug fixes
+ - xfsdump and xfsrestore added
+ - xfsstats added
+ - fsck.xfs (symlink to /bin/true) added
+ - demise of sim library complete, mkfs and repair reworked
+ - no longer need to have an XFS kernel handy for building xfs-cmds
+ - xfs_copy compiles on Linux
+ - dump/restore README added
+ - late alpha code
+
+xfs-cmds-1.0.2 (27 July 2000)
+ - numerous bug fixes
+ - xfs_attr (extended attributes) command added
+ - fsr_xfs added (ported by jones@tacc.utexas.edu)
+ - LVM+XFS README added
+ - early alpha code
+
+xfs-cmds-1.0.1 (5 July 2000)
+ - numerous bug fixes
+ - reworked build environment
+ - begun work on user/kernel separation
+ - early alpha code
+
+xfs-cmds-1.0.0 (16 June 2000)
+ - initial release for USENIX CDs
+ - early alpha code
+
--- /dev/null
+----------------------------------------------------------------------
+\f
+<http://www.fsf.org/copyleft/gpl.txt>
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+
+----------------------------------------------------------------------
--- /dev/null
+
+ This is a credits-file of people that have contributed to
+ the Linux/XFS project. It is sorted by name and formatted
+ to allow easy grepping and beautification by scripts (i.e.
+ it follows the same format Linus has used in the kernel).
+ The fields are: name (N), email (E), web-address (W), PGP
+ key ID and fingerprint (P), description (D), and snail-mail
+ address (S).
+
+----------
+
+N: Thomas Graichen
+E: thomas.graichen@innominate.de
+D: XFS FAQ ( http://oss.sgi.com/projects/xfs/faq.html ) maintainer
+D: PowerPC and Alpha porting
+S: Berlin, Germany
+
+N: Bill Jones
+E: jones@tacc.utexas.edu
+D: fsr port to Linux
+S: Austin, Texas, USA
+
--- /dev/null
+This document describes how to configure and build the open source XFS
+commands and utilites ("xfsprogs") from source, and how to install and
+run them.
+
+0. If you have the binary rpm, simply install it and skip to step 2 (below).
+ The rpm command to do this is:
+ # rpm -Uvh xfsprogs
+
+ The Debian command to do this is:
+ # dpkg -i xfsprogs
+ or, if you have apt configured (don't need the binary package):
+ # apt-get install xfsprogs
+
+1. Configure, build and install the package
+
+ The xfsprogs package uses autoconf/configure and expects a GNU build
+ environment (your platform must at least have both autoconf and gmake).
+ You will also need to have installed either the e2fsprogs-devel package
+ (on an RPM based system) or the uuid-dev package (on a Debian system)
+ as some of the commands make use of the UUID library provided by these.
+
+ If you just want to spin an RPM and/or tar file, use the Makepkgs
+ script in the top level directory. This will configure and build
+ the package and leave binary and src RPMs in the build/rpm
+ directory. It will also leave a tar file in the build/tar
+ directory.
+
+ # ./Makepkgs verbose
+
+ If you want to build the package and install it manually, use the
+ following steps:
+
+ # make configure (or run autoconf; ./configure)
+ # make
+ # su root
+ # make install
+
+ Note that there are so many "install" variants out there that we
+ wrote our own script (see "install-sh" in the top level directory).
+
+ If you wish to turn off debugging asserts in the command build and
+ turn on the optimizer then set the shell environment variables:
+
+ OPTIMIZER=-O
+ DEBUG=-DNDEBUG
+
+ before running make configure or Makepkgs.
+
+2. How to Contribute
+
+ See the README file in this directory for details about how to
+ contribute to the XFS project.
TOPDIR = ..
include $(TOPDIR)/include/builddefs
-DOCFILES = README.LVM README.xfsdump Porting-Guide
-LSRCFILES = $(DOCFILES)
+# [don't install COPYING for Debian builds - use Debian preferred method]
+HAVE_DEBIAN = $(shell test -f /etc/debian_version && echo yes || echo no)
-default: $(CMDTARGET)
+LSRCFILES = INSTALL PORTING CHANGES COPYING CREDITS README.LVM
+LDIRT = *.gz
+
+default: $(CMDTARGET) CHANGES.gz
include $(BUILDRULES)
+CHANGES.gz:
+ $(ZIP) --best -c < CHANGES > $@
+
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_DOC_DIR)
- $(INSTALL) -m 644 $(DOCFILES) $(XFS_CMDS_DOC_DIR)
+ $(INSTALL) -m 755 -d $(PKG_DOC_DIR)
+ifeq ($(HAVE_DEBIAN), no)
+ $(INSTALL) -m 644 COPYING $(PKG_DOC_DIR)
+endif
+ $(INSTALL) -m 644 PORTING CHANGES.gz CREDITS README.LVM $(PKG_DOC_DIR)
+install-dev:
--- /dev/null
+
+1. unpack the source tarball and cd to the resulting dir
+
+2. # autoconf
+ this reads configure.in and generates the ./configure script
+
+3. # ./configure
+ this probes your system and then, for each "file" named
+ in the AC_OUTPUT() macro near the end of configure.in,
+ read "file".in and generate "file". Variables named @somevariable@
+ will be substituted with literal values.
+
+4. step (3) produces several files. These files are generated by
+ configure from their respective .in file in the same directory.
+ You should have a read of these generated files and diff them
+ against their respective .in files to see what was substituted
+ by configure.
+
+ src/include/builddefs
+ common definitions for the build environment. This is included
+ by all Makefiles, in conjunction with src/include/buildrules.
+ Note that most autoconf/configure build environments generate
+ Makefile (from Makefile.in) in every src dir. Instead, we
+ generate builddefs, and then include it in every Makefile.
+
+ src/include/platform_defs.h
+ header containing conditional macros defining the C run-time
+ environment discovered by the configure script.
+
+5. read some or all of the GNU tool chain documentation
+ gmake Table Of Contents :
+ http://www.delorie.com/gnu/docs/make/make_toc.html
+ gmake Quick Reference section :
+ http://www.delorie.com/gnu/docs/make/make_120.html
+ Autoconf :
+ http://www.delorie.com/gnu/docs/autoconf/autoconf_toc.html
+ gcc/g++ :
+ http://www.delorie.com/gnu/docs/gcc/gcc_toc.html
+
+6. Makefiles and build environment
+ First have a look at some Makefiles
+
+ example using SUBDIRS : xfsprogs/Makefile
+ example static library: xfsprogs/libxfs/Makefile
+ example command : xfsprogs/bmap/Makefile
+
+ All Makefiles must define TOPDIR as the root of the project. This
+ allows other stuff to be found relative to $(TOPDIR).
+
+ All Makefiles should have the following structure, which is
+ much like commondefs and commonrules in the IRIX build environment, e.g.
+
+ # ----------------------------------------------------------------------
+ # TOPDIR must point to the root of the project
+ # The builddefs file defines lots of things. Read it.
+ TOPDIR = ..
+ include $(TOPDIR)/include/builddefs
+
+ # first rule should always be "default"
+ default : sometarget
+ commands to build targets, if necessary
+
+ # $(BUILDRULES) is defined in builddefs and includes rules for
+ # descending subdirs, building targets and installation rules
+ include $(BUILDRULES)
+
+ install : default
+ $(INSTALL) sometargets somewhere
+ # ----------------------------------------------------------------------
+
+7. packaging
+
+ # ./Makepkgs
+ this script generates all of the packages supported - each has a
+ subdirectory below xfsprogs/build where knowledge specific to
+ each package type is maintained.
+
+ The script produces logs of each stage of the build (this info is
+ also echoed to the screen when the "verbose" option is provided):
+
+ xfsprogs/Logs/configure - `autoconf; ./configure' output
+ xfsprogs/Logs/default - `make default' output
+ xfsprogs/Logs/dist - `make build dist' output
+
+ On successful completion, the script echoes the names of packages
+ successfully generated.
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_SBIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_SBIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_SBIN_DIR)
+install-dev:
include $(TOPDIR)/include/builddefs
CMDTARGET = xfs_growfs
-CMDDEPS = $(LIBXFS)
CFILES = xfs_growfs.c
LLDLIBS = $(LIBXFS) $(LIBUUID)
+LLDFLAGS = -L$(TOPDIR)/libxfs
LSRCFILES = xfs_info.sh
default: $(CMDTARGET)
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 xfs_info.sh $(XFS_CMDS_BIN_DIR)/xfs_info
+ $(INSTALL) -m 755 -d $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 xfs_info.sh $(PKG_BIN_DIR)/xfs_info
+install-dev:
TOPDIR = ..
include $(TOPDIR)/include/builddefs
-LSRCFILES = libxfs.h acl.h arch.h attributes.h handle.h jdm.h \
- platform_defs.h.in builddefs.in buildrules \
+HFILES = arch.h handle.h jdm.h libxfs.h xqm.h \
xfs_ag.h xfs_alloc.h xfs_alloc_btree.h xfs_arch.h xfs_attr_leaf.h \
xfs_attr_sf.h xfs_bit.h xfs_bmap.h xfs_bmap_btree.h xfs_btree.h \
xfs_buf_item.h xfs_cred.h xfs_da_btree.h xfs_dfrag.h xfs_dinode.h \
xfs_ialloc_btree.h xfs_imap.h xfs_inode.h xfs_inode_item.h xfs_inum.h \
xfs_log.h xfs_log_priv.h xfs_log_recover.h xfs_mount.h xfs_quota.h \
xfs_rtalloc.h xfs_sb.h xfs_trans.h xfs_trans_space.h xfs_types.h
+LSRCFILES = platform_defs.h.in builddefs.in buildrules lvm.h lvm_user.h liblvm.h
-default :
+default install :
include $(BUILDRULES)
-install : default
+install-dev: default
+ $(INSTALL) -m 755 -d $(PKG_INC_DIR)
+ $(INSTALL) -m 644 $(HFILES) $(PKG_INC_DIR)
+ $(INSTALL) -m 644 platform_defs.h $(PKG_INC_DIR)
OPTIMIZER = @opt_build@
MALLOCLIB = @malloc_lib@
-LIBXFS = $(TOPDIR)/libxfs/libxfs.a
-LIBATTR = $(TOPDIR)/libattr/libattr.a
-LIBHANDLE = $(TOPDIR)/handle/libhandle.a
LIBUUID = /usr/lib/libuuid.a
+LIBXFS = -lxfs
+LIBHANDLE = -lhandle
+
LIBLVM = @liblvm@
+USELVM = -DHAVE_LIBLVM=@have_liblvm@
BUILDRULES = $(TOPDIR)/include/buildrules
# General package information
-TARGET_OS = @host_platform@
-PACKAGE_NAME = @package_name@
-PACKAGE_RELEASE = @package_release@
-PACKAGE_VERSION = @package_version@
-PACKAGE_DISTRIBUTION = @package_distribution@
-PACKAGE_BUILDER = @package_builder@
-XFS_CMDS_SBIN_DIR = @xfs_cmds_sbin_dir@
-XFS_CMDS_BIN_DIR = @xfs_cmds_bin_dir@
-XFS_CMDS_LIB_DIR = @xfs_cmds_lib_dir@
-XFS_CMDS_SHARE_DIR = @xfs_cmds_share_dir@
-XFS_CMDS_INC_DIR = @xfs_cmds_inc_dir@
-XFS_CMDS_MAN_DIR = @xfs_cmds_man_dir@
-XFS_CMDS_TMP_DIR = @xfs_cmds_tmp_dir@
-XFS_CMDS_DOC_DIR = @xfs_cmds_doc_dir@
+PKG_NAME = @pkg_name@
+PKG_RELEASE = @pkg_release@
+PKG_VERSION = @pkg_version@
+PKG_DISTRIBUTION = @pkg_distribution@
+PKG_BUILDER = @pkg_builder@
+PKG_BIN_DIR = @pkg_bin_dir@
+PKG_LIB_DIR = @pkg_lib_dir@
+PKG_SBIN_DIR = @pkg_sbin_dir@
+PKG_SLIB_DIR = @pkg_slib_dir@
+PKG_INC_DIR = @pkg_inc_dir@
+PKG_MAN_DIR = @pkg_man_dir@
+PKG_DOC_DIR = @pkg_doc_dir@
# LCFLAGS, LLDFLAGS, LLDLIBS, LSRCFILES and LDIRT may be specified in
# user Makefiles. Note: LSRCFILES is anything other than Makefile, $(CFILES)
# during the "dist" phase (packaging).
CFLAGS += $(OPTIMIZER) $(DEBUG) -funsigned-char -Wall -Wno-parentheses \
- $(LCFLAGS) -I$(TOPDIR)/include '-DVERSION="$(PACKAGE_VERSION)"' \
+ $(LCFLAGS) -I$(TOPDIR)/include '-DVERSION="$(PKG_VERSION)"' \
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE \
- -DXFS_BIG_FILES=1 -DXFS_BIG_FILESYSTEMS=1 -DHAVE_LIBLVM=@have_liblvm@
+ -DXFS_BIG_FILES=1 -DXFS_BIG_FILESYSTEMS=1
LDFLAGS = $(LLDFLAGS)
LDLIBS = $(LLDLIBS) $(MALLOCLIB)
# Standard targets
#
ifdef CMDTARGET
-$(CMDTARGET) : $(SUBDIRS) $(OBJECTS) $(CMDDEPS)
+$(CMDTARGET) : $(SUBDIRS) $(OBJECTS)
$(CCF) -o $(CMDTARGET) $(LDFLAGS) $(OBJECTS) $(LDLIBS)
+$(CMDTARGET).static : $(SUBDIRS) $(OBJECTS)
+ $(CCF) -static -o $(CMDTARGET).static $(LDFLAGS) $(OBJECTS) $(LDLIBS)
endif
ifdef LIBTARGET
$(LIBTARGET) : $(SUBDIRS) $(OBJECTS)
- $(CC) $(LDFLAGS) -shared -Wl,-soname,$(LIBTARGET) -o $(LIBTARGET) \
- $(OBJECTS) $(LDLIBS) $(LIB_FOR_DLOPEN) $(LIB_FOR_BASENAME)
+ $(CC) $(LDFLAGS) -fPIC -shared -Wl,-soname,$(LIBTARGET) -o $(LIBTARGET) $(OBJECTS) $(LDLIBS)
endif
ifdef STATICLIBTARGET
--- /dev/null
+#! /bin/sh
+#
+# Copyright (c) 2000 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like. Any license provided herein, whether implied or
+# otherwise, applies only to this software file. Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+# Mountain View, CA 94043, or:
+#
+# http://www.sgi.com
+#
+# For further information regarding this notice, see:
+#
+# http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
+#
+
+#
+# This script emulates bsd install and also recognises
+# two environment variables, with the following semantics :-
+#
+# $DIST_MANIFEST - if set, the name of the file to append manifest
+# information in the following format:
+# File : f mode owner group src target
+# Directory: d mode owner group target
+# Symlink : l linkval target
+#
+# $DIST_ROOT - if set, prepend to target
+#
+# The sematics of all combinations of these two variables
+# are as follows:
+#
+# $DIST_MANIFEST? $DIST_ROOT? | Copy? Append Manifest?
+# -----------------------------+--------------------------
+# not set not set | yes no
+# not set set | yes no
+# set not set | no yes
+# set set | yes yes
+#
+_usage() {
+ echo "Usage: $prog [-o owner] [-g group] [-m mode] -d directory"
+ echo "or $prog [-D] [-o owner] [-g group] [-m mode] file directory/file"
+ echo "or $prog [-o owner] [-g group] [-m mode] file [file ...] directory"
+ echo "or $prog -S file target (creates \"target\" symlink)"
+ echo ""
+ echo "The \$DIST_MANIFEST and \$DIST_ROOT environment variables affect the"
+ echo "behaviour of this command - see comments in the script."
+ echo "The -D flag is only available for the second usage, and causes"
+ echo "the target directory to be created before installing the file."
+ echo ""
+ exit 1
+}
+
+_chown ()
+{
+ _st=255
+ if [ $# -eq 3 ] ; then
+ chown $1:$2 $3
+ _st=$?
+ if [ $_st -ne 0 ] ; then
+ if [ $REAL_UID != '0' ] ; then
+ if [ ! -f $DIST_ROOT/.chown.quite ] ; then
+ echo '==============================================='
+ echo Ownership of files under ${DIST_ROOT:-/}
+ echo cannot be changed
+ echo '==============================================='
+ if [ -n "$DIST_ROOT" ] ; then
+ touch $DIST_ROOT/.chown.quite
+ fi
+ fi
+ _st=0
+ fi
+ fi
+ fi
+
+ return $_st
+}
+
+
+_manifest ()
+{
+ echo $* | sed -e 's/\/\//\//g' >>${DIST_MANIFEST:-/dev/null}
+}
+
+prog=`basename $0`
+HERE=`pwd`
+dflag=false
+Dflag=false
+Sflag=false
+DIRMODE=755
+FILEMODE=644
+OWNER=`id -u`
+GROUP=`id -g`
+REAL_UID=$OWNER
+
+# default is to install and don't append manifest
+INSTALL=true
+MANIFEST=:
+
+[ -n "$DIST_MANIFEST" -a -z "$DIST_ROOT" ] && INSTALL=false
+[ -n "$DIST_MANIFEST" ] && MANIFEST="_manifest"
+
+[ $# -eq 0 ] && _usage
+
+if $INSTALL
+then
+ CP=cp; LN=ln; MKDIR=mkdir; CHMOD=chmod; CHOWN=_chown
+else
+ CP=true; LN=true; MKDIR=true; CHMOD=true; CHOWN=true
+fi
+
+[ -n "$DIST_ROOT" -a $REAL_UID -ne 0 ] && CHOWN=true
+
+while getopts "Dcm:d:S:o:g:" c $*
+do
+ case $c in
+ c)
+ ;;
+ g)
+ GROUP=$OPTARG
+ ;;
+ o)
+ OWNER=$OPTARG
+ ;;
+ m)
+ DIRMODE=`expr $OPTARG`
+ FILEMODE=$DIRMODE
+ ;;
+ D)
+ Dflag=true
+ ;;
+ S)
+ symlink=$OPTARG
+ Sflag=true
+ ;;
+ d)
+ dir=$DIST_ROOT/$OPTARG
+ dflag=true
+ ;;
+ *)
+ _usage
+ ;;
+ esac
+done
+
+shift `expr $OPTIND - 1`
+
+status=0
+if $dflag
+then
+ #
+ # first usage
+ #
+ $MKDIR -p $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHMOD $DIRMODE $dir
+ status=$?
+ fi
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir
+ status=$?
+ fi
+ $MANIFEST d $DIRMODE $OWNER $GROUP ${dir#$DIST_ROOT}
+elif $Sflag
+then
+ #
+ # fourth usage (symlink)
+ #
+ if [ $# -ne 1 ]
+ then
+ _usage
+ else
+ target=$DIST_ROOT/$1
+ fi
+ $LN -s -f $symlink $target
+ status=$?
+ $MANIFEST l $symlink ${target#$DIST_ROOT}
+else
+ list=""
+ dir=""
+ if [ $# -eq 2 ]
+ then
+ #
+ # second usage
+ #
+ f=$1
+ dir=$DIST_ROOT/$2
+ if $Dflag
+ then
+ mkdir -p `dirname $dir`
+ fi
+ $CP $f $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ if [ -f $dir/$f ]
+ then
+ $CHMOD $FILEMODE $dir/$f
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir/$f
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$f ${dir#$DIST_ROOT}/$f
+ else
+ $CHMOD $FILEMODE $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$dir ${dir#$DIST_ROOT}
+ fi
+ fi
+ else
+ #
+ # third usage
+ #
+ n=1
+ while [ $# -gt 0 ]
+ do
+ if [ $# -gt 1 ]
+ then
+ list="$list $1"
+ else
+ dir=$DIST_ROOT/$1
+ fi
+ shift
+ done
+
+ # echo DIR=$dir list=\"$list\"
+ for f in $list
+ do
+ $CP $f $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHMOD $FILEMODE $dir/$f
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir/$f
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$f ${dir#$DIST_ROOT}/$f
+ fi
+ [ $status -ne 0 ] && break
+ done
+ fi
+fi
+
+exit $status
TOPDIR = ..
include $(TOPDIR)/include/builddefs
-STATICLIBTARGET = libhandle.a
+LIB = libhandle
+STATICLIBTARGET = $(LIB).a
+#MAJOR = 1
+#MINOR = 0
+#LIBTARGET = $(LIB).so.$(MAJOR)
+
CFILES = handle.c jdm.c
+LCFLAGS = -D_REENTRANT
-default: $(STATICLIBTARGET)
+default: $(STATICLIBTARGET)
include $(BUILDRULES)
install: default
- #$(INSTALL) -m 755 -d $(XFS_CMDS_LIB_DIR)
- #$(INSTALL) -m 755 $(STATICLIBTARGET) $(XFS_CMDS_LIB_DIR)
+
+#MODE = $(shell test -f /etc/debian_version && echo 644 || echo 755)
+#install: default
+# $(INSTALL) -m 755 -d $(PKG_SLIB_DIR)
+# $(INSTALL) -m $(MODE) $(LIBTARGET) $(PKG_SLIB_DIR)/$(LIBTARGET).$(MINOR)
+# $(INSTALL) -S $(LIBTARGET).$(MINOR) $(PKG_SLIB_DIR)/$(LIBTARGET)
+#install-dev: default
+# $(INSTALL) -S $(PKG_SLIB_DIR)/$(LIBTARGET) $(PKG_LIB_DIR)/$(LIB).so
+
+install-dev: default
+ $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
+ $(INSTALL) -m 644 $(STATICLIBTARGET) $(PKG_LIB_DIR)
TOPDIR = ..
include $(TOPDIR)/include/builddefs
-STATICLIBTARGET = libxfs.a
+LIB = libxfs
+STATICLIBTARGET = $(LIB).a
+
HFILES = xfs.h
CFILES = arch.c init.c logitem.c rdwr.c trans.c util.c \
xfs_bit.c xfs_rtbit.c xfs_alloc.c xfs_ialloc.c xfs_rtalloc.c \
xfs_dir2_node.c xfs_dir2_data.c xfs_dir2_sf.c xfs_bmap.c \
xfs_mount.c xfs_trans.c
-# xfs_repair is braindead, don't try linking it with a debug libxfs yet.
-DEBUG = -DNDEBUG
-
#
# Tracing flags:
# -DIO_DEBUG reads and writes of buffers
#
LCFLAGS += -Wno-unknown-pragmas -Wno-unused -Wno-uninitialized -I.
-default: $(STATICLIBTARGET)
+# don't try linking xfs_repair with a debug libxfs.
+DEBUG = -DNDEBUG
+
+default: $(STATICLIBTARGET)
include $(BUILDRULES)
install: default
+
+install-dev: default
+ $(INSTALL) -m 755 -d $(PKG_LIB_DIR)
+ $(INSTALL) -m 644 $(STATICLIBTARGET) $(PKG_LIB_DIR)
+
+#MODE = $(shell test -f /etc/debian_version && echo 644 || echo 755)
+#MAJOR = 1
+#MINOR = 0
+#LIBTARGET = $(LIB).so.$(MAJOR)
+#LDIRT = $(LIB).so
+#default:
+# [ -L $(LIB).so ] || $(LN_S) $(LIBTARGET) $(LIB).so
+#install: default
+# $(INSTALL) -m 755 -d $(PKG_SLIB_DIR)
+# $(INSTALL) -m $(MODE) $(LIBTARGET) $(PKG_SLIB_DIR)/$(LIBTARGET).$(MINOR)
+# #$(INSTALL) -S $(LIBTARGET).$(MINOR) $(PKG_SLIB_DIR)/$(LIBTARGET)
+#install-dev: default
+# $(INSTALL) -S $(PKG_SLIB_DIR)/$(LIBTARGET) $(PKG_LIB_DIR)/$(LIB).so
#include <string.h>
#include <errno.h>
#include <sys/stat.h>
-#include <attributes.h>
/*
* Map XFS kernel routine names to libxfs.h names
typedef enum { B_FALSE, B_TRUE } boolean_t;
typedef struct { dev_t dev; } buftarg_t;
#define STATIC
+#define ATTR_ROOT 1 /* use attrs in root namespace */
#define ENOATTR 1009 /* Attribute not found */
#define EFSCORRUPTED 1010 /* Filesystem is corrupted */
#define ktrace_t void
include $(TOPDIR)/include/builddefs
CMDTARGET = xfs_logprint
-CMDDEPS = $(LIBXFS)
CFILES = log_print_trans.c log_print_all.c log_misc.c logprint.c \
xfs_log_recover.c
HFILES = logprint.h
LLDLIBS = $(LIBXFS) $(LIBUUID)
+LLDFLAGS = -L$(TOPDIR)/libxfs
default: $(CMDTARGET)
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_BIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_BIN_DIR)
+install-dev:
TOPDIR = ..
include $(TOPDIR)/include/builddefs
-SUBDIRS = man1 man2 man3 man5 man8
+SUBDIRS = man3 man5 man8
-default install : $(SUBDIRS)
+default install install-dev : $(SUBDIRS)
$(SUBDIRS_MAKERULE)
include $(BUILDRULES)
--- /dev/null
+#
+# Copyright (c) 2000 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like. Any license provided herein, whether implied or
+# otherwise, applies only to this software file. Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+# Mountain View, CA 94043, or:
+#
+# http://www.sgi.com
+#
+# For further information regarding this notice, see:
+#
+# http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
+#
+
+TOPDIR = ../..
+include $(TOPDIR)/include/builddefs
+
+MAN_SECTION = 3
+
+MAN_PAGES = $(shell echo *.$(MAN_SECTION))
+MAN_DEST = $(PKG_MAN_DIR)/man$(MAN_SECTION)
+LSRCFILES = $(MAN_PAGES)
+
+default : $(MAN_PAGES)
+
+include $(BUILDRULES)
+
+install :
+
+install-dev : default
+ $(INSTALL) -m 755 -d $(MAN_DEST)
+ $(INSTALL_MAN)
--- /dev/null
+.TH HANDLE 3
+.SH NAME
+path_to_handle, path_to_fshandle, fd_to_handle, handle_to_fshandle, open_by_handle, readlink_by_handle, attr_multi_by_handle, attr_list_by_handle, fssetdm_by_handle, free_handle \- file handle operations
+.SH C SYNOPSIS
+.nf
+.B #include <sys/types.h>
+.B #include <xfs/handle.h>
+.PP
+.B "int path_to_handle (char *path, void **hanp,"
+.B " size_t *hlen);"
+.PP
+.B "int path_to_fshandle (char *path, void **hanp,"
+.B " size_t *hlen);"
+.PP
+.B "int fd_to_handle (int fd, void **hanp, size_t *hlen);
+.PP
+.B "int handle_to_fshandle (void *hanp, size_t hlen,"
+.B " void **fshanp, size_t *fshlen);
+.PP
+.B "int open_by_handle (void *hanp, size_t hlen,"
+.B " int oflag);"
+.PP
+.B "int readlink_by_handle (void *hanp, size_t hlen,"
+.B " void *buf, size_t bs);
+.PP
+.B "int attr_multi_by_handle (void *hanp, size_t hlen,"
+.B " void *buf, int rtrvcnt,"
+.B " int flags);"
+.PP
+.B "int attr_list_by_handle (void *hanp, size_t hlen,"
+.B " char *buf, size_t bufsiz,"
+.B " int flags,"
+.B " struct attrlist_cursor *cursor);"
+.PP
+.B "int fssetdm_by_handle (void *hanp, size_t hlen,"
+.B " struct fsdmidata *fssetdm);"
+.PP
+.B "void free_handle (void *hanp, size_t hlen);
+.Op
+.SH DESCRIPTION
+.PP
+These functions provide a way to perform certain
+filesystem operations without using a file descriptor
+to access filesystem objects.
+They are intended for use by a limited set of system utilities
+such as backup programs.
+They are supported only by the XFS filesystem.
+Link with the
+.I libhandle
+library to access these functions.
+.sp
+A
+.I handle
+uniquely identifies a filesystem object
+or an entire filesystem.
+There is one and only one
+handle per filesystem or filesystem object.
+Handles consist of some number of bytes.
+The size of a handle
+(i.e. the number of bytes comprising it)
+varies by the type of handle
+and may vary for different objects
+of the same type.
+The content of a handle is opaque to applications.
+Since handle sizes vary
+and their contents are opaque,
+handles are described by two quantities,
+a pointer and a size.
+The size indicates the number of bytes
+in the handle which are pointed to by the pointer.
+.P
+The \f2path_to_handle\f1() function
+returns the handle for the object given by the
+.I path
+argument.
+If the final component of the path name is a symbolic link,
+the handle returned is that of the link itself.
+.P
+The \f2path_to_fshandle\f1() function
+returns the handle for the filesystem
+in which the object given by the
+.I path
+argument resides.
+.P
+The \f2fd_to_handle\f1() function
+returns the handle for the object referenced by the
+.I fd
+argument,
+which must be a valid file descriptor.
+.P
+The \f2handle_to_fshandle\f1() function
+returns the handle for the filesystem
+in which the object referenced by the
+handle given by the
+.I hanp
+and
+.I hlen
+arguments resides.
+.P
+The \f2open_by_handle\f1() function
+opens a file descriptor for the object referenced
+by a handle.
+It is analogous and identical to
+.I open(2)
+with the exception of accepting handles instead of path names.
+.P
+The \f2readlink_by_handle\f1() function
+returns the contents of a symbolic link
+referenced by a handle.
+.P
+The \f2attr_multi_by_handle\f1() function
+manipulates multiple user attributes on a
+filesystem object.
+It is analogous and identical to
+.I attr_multif(2)
+except that a handle is specified instead of a file descriptor.
+.P
+The \f2attr_list_by_handle\f1() function returns
+the names of the user attributes of a filesystem object.
+It is analogous and identical to
+.I attr_listf(2)
+except that a handle is specified instead of a file descriptor.
+.P
+The \f2fssetdm_by_handle\f1() function sets the
+di_dmevmask and di_dmstate fields in an XFS on-disk inode.
+It is analogous to the \f2F_FSSETDM\f1 subfunction of
+.I fcntl(2)
+except that a handle is specified instead of a file descriptor.
+.P
+The \f2free_handle\f1() function
+frees the storage allocated for handles
+returned by the following functions:
+\f2path_to_handle\f1(),
+\f2path_to_fshandle\f1(),
+\f2fd_to_handle\f1(),
+and
+\f2handle_to_fshandle\f1().
+.SH "SEE ALSO"
+open(2),
+readlink(2),
+attr_multi(2),
+attr_list(2),
+fcntl(2).
+.SH "DIAGNOSTICS"
+.PP
+The function
+\f2free_handle\f1()
+has no failure indication.
+The other functions
+return the value 0 to the calling process
+if they succeed;
+otherwise, they return the value -1 and set
+.I errno
+to indicate the error:
+.sp
+.TP 15
+.SM
+\%[EACCES]
+Search permission was denied for a component of
+.IR path .
+.TP 15
+.SM
+\%[EBADF]
+.I fd
+is not a valid and open file descriptor.
+.TP 15
+.SM
+\%[EFAULT]
+An argument pointed to an invalid address.
+.TP 15
+.SM
+\%[EINVAL]
+.I path
+is in a filesystem that does not support these functions.
+.TP 15
+.SM
+\%[ELOOP]
+Too many symbolic links were encountered in translating the path name.
+.TP 15
+.SM
+\%[ENAMETOOLONG]
+A component of
+.I path
+or the entire length of
+.I path
+exceeds filesystem limits.
+.TP 15
+.SM
+\%[ENOENT]
+A component of
+.I path
+does not exist.
+.TP 15
+.SM
+\%[EPERM]
+The caller does not have sufficient privileges.
MAN_SECTION = 5
MAN_PAGES = $(shell echo *.$(MAN_SECTION))
-MAN_DEST = $(XFS_CMDS_MAN_DIR)/man$(MAN_SECTION)
+MAN_DEST = $(PKG_MAN_DIR)/man$(MAN_SECTION)
LSRCFILES = $(MAN_PAGES)
-
default : $(MAN_PAGES)
include $(BUILDRULES)
install : default
$(INSTALL) -m 755 -d $(MAN_DEST)
$(INSTALL_MAN)
+install-dev :
MAN_SECTION = 8
MAN_PAGES = $(shell echo *.$(MAN_SECTION))
-MAN_DEST = $(XFS_CMDS_MAN_DIR)/man$(MAN_SECTION)
+MAN_DEST = $(PKG_MAN_DIR)/man$(MAN_SECTION)
LSRCFILES = $(MAN_PAGES)
default : $(MAN_PAGES)
install : default
$(INSTALL) -m 755 -d $(MAN_DEST)
$(INSTALL_MAN)
+install-dev :
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_BIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_BIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_BIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_BIN_DIR)
+install-dev:
include $(TOPDIR)/include/builddefs
CMDTARGET = mkfs.xfs
-CMDDEPS = $(LIBXFS)
MAXTRRES = maxtrres
CFILES = xfs_mkfs.c mountinfo.c proto.c
HFILES = xfs_mkfs.h mountinfo.h proto.h volume.h
+LCFLAGS = $(USELVM)
LLDLIBS = $(LIBXFS) $(LIBUUID) $(LIBLVM)
+LLDFLAGS = -L$(TOPDIR)/libxfs
+
MAXTRLIBS = $(LIBXFS) $(LIBUUID)
LSRCFILES = $(MAXTRRES).c
LDIRT = $(MAXTRRES) $(MAXTRRES).h
include $(BUILDRULES)
-install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_SBIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_SBIN_DIR)
-
$(MAXTRRES):
$(CCF) $@.c -o $@ $(LDFLAGS) $(MAXTRLIBS)
$(MAXTRRES).h: $(MAXTRRES)
+ LD_LIBRARY_PATH=../libxfs; export LD_LIBRARY_PATH; \
./$(MAXTRRES) > $@ || ( rm -f $@ && exit 1 )
+
+install: default
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_SBIN_DIR)
+install-dev:
include $(TOPDIR)/include/builddefs
CMDTARGET = xfs_repair
-CMDDEPS = $(LIBXFS)
HFILES = agheader.h attr_repair.h avl.h avl64.h bmap.h dinode.h dir.h \
dir2.h dir_stack.h err_protos.h globals.h incore.h protos.h rt.h \
scan.c versions.c xfs_repair.c
LLDLIBS = $(LIBXFS) $(LIBUUID)
+LLDFLAGS = -L$(TOPDIR)/libxfs
default: $(CMDTARGET)
CFLAGS += -DAVL_USER_MODE -DAVL_FUTURE_ENHANCEMENTS
install: default
- $(INSTALL) -m 755 -d $(XFS_CMDS_SBIN_DIR)
- $(INSTALL) -m 755 $(CMDTARGET) $(XFS_CMDS_SBIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(INSTALL) -m 755 $(CMDTARGET) $(PKG_SBIN_DIR)
+install-dev:
#include <libxfs.h>
#include <errno.h>
-#include <acl.h>
#include "globals.h"
#include "err_protos.h"
+#include "attr_repair.h"
#include "dir.h"
#include "dinode.h"
#include "bmap.h"
struct blkmap;
+#define SGI_ACL_FILE "SGI_ACL_FILE"
+#define SGI_ACL_DEFAULT "SGI_ACL_DEFAULT"
+#define SGI_ACL_FILE_SIZE 12
+#define SGI_ACL_DEFAULT_SIZE 15
+
+#define ACL_MAX_ENTRIES 25
+#define ACL_USER_OBJ 0x01 /* owner */
+#define ACL_USER 0x02 /* additional users */
+#define ACL_GROUP_OBJ 0x04 /* group */
+#define ACL_GROUP 0x08 /* additional groups */
+#define ACL_MASK 0x10 /* mask entry */
+#define ACL_OTHER_OBJ 0x20 /* other entry */
+
+typedef ushort acl_perm_t;
+typedef int acl_type_t;
+typedef int acl_tag_t;
+
+/*
+ * On-disk representation of an ACL.
+ */
+struct acl_entry {
+ acl_tag_t ae_tag;
+ uid_t ae_id;
+ acl_perm_t ae_perm;
+};
+
+typedef struct acl_entry * acl_entry_t;
+
+struct acl {
+ int acl_cnt; /* Number of entries */
+ struct acl_entry acl_entry[ACL_MAX_ENTRIES];
+};
+
int
process_attributes(
xfs_mount_t *mp,
struct blkmap *blkmap,
int *repair);
-
#endif /* _XR_ATTRREPAIR_H */
projects / thirdparty / xfsprogs-dev.git / commitdiff
