ARM: dts: stm32: update i2c nodes interrupt/wakeup-source in stm32mp131

Update all i2c nodes with the following properties:
  - replace interrupts with interrupts-extended and rely on exti
  - add the wakeup-source property

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-2-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index a2513d55499ff8b492ed34af96023855db64b13e..164ad704f764e28c8a3bc329979b26a35a552b6c 100644 (file)
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -470,8 +470,8 @@
                        compatible = "st,stm32mp13-i2c";
                        reg = <0x40012000 0x400>;
                        interrupt-names = "event", "error";
-                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&exti 21 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&rcc I2C1_K>;
                        resets = <&rcc I2C1_R>;
                        #address-cells = <1>;
@@ -479,6 +479,7 @@
                        dmas = <&dmamux1 33 0x400 0x1>,
                               <&dmamux1 34 0x400 0x1>;
                        dma-names = "rx", "tx";
+                       wakeup-source;
                        st,syscfg-fmp = <&syscfg 0x4 0x1>;
                        i2c-analog-filter;
                        status = "disabled";
@@ -488,8 +489,8 @@
                        compatible = "st,stm32mp13-i2c";
                        reg = <0x40013000 0x400>;
                        interrupt-names = "event", "error";
-                       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&exti 22 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&intc GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&rcc I2C2_K>;
                        resets = <&rcc I2C2_R>;
                        #address-cells = <1>;
@@ -498,6 +499,7 @@
                               <&dmamux1 36 0x400 0x1>;
                        dma-names = "rx", "tx";
                        st,syscfg-fmp = <&syscfg 0x4 0x2>;
+                       wakeup-source;
                        i2c-analog-filter;
                        status = "disabled";
                };
@@ -1312,8 +1314,8 @@
                                compatible = "st,stm32mp13-i2c";
                                reg = <0x4c004000 0x400>;
                                interrupt-names = "event", "error";
-                               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts-extended = <&exti 23 IRQ_TYPE_LEVEL_HIGH>,
+                                                     <&intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&rcc I2C3_K>;
                                resets = <&rcc I2C3_R>;
                                #address-cells = <1>;
@@ -1322,6 +1324,7 @@
                                       <&dmamux1 74 0x400 0x1>;
                                dma-names = "rx", "tx";
                                st,syscfg-fmp = <&syscfg 0x4 0x4>;
+                               wakeup-source;
                                i2c-analog-filter;
                                access-controllers = <&etzpc 20>;
                                status = "disabled";
@@ -1331,8 +1334,8 @@
                                compatible = "st,stm32mp13-i2c";
                                reg = <0x4c005000 0x400>;
                                interrupt-names = "event", "error";
-                               interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+                                                     <&intc GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&rcc I2C4_K>;
                                resets = <&rcc I2C4_R>;
                                #address-cells = <1>;
@@ -1341,6 +1344,7 @@
                                       <&dmamux1 76 0x400 0x1>;
                                dma-names = "rx", "tx";
                                st,syscfg-fmp = <&syscfg 0x4 0x8>;
+                               wakeup-source;
                                i2c-analog-filter;
                                access-controllers = <&etzpc 21>;
                                status = "disabled";
@@ -1350,8 +1354,8 @@
                                compatible = "st,stm32mp13-i2c";
                                reg = <0x4c006000 0x400>;
                                interrupt-names = "event", "error";
-                               interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts-extended = <&exti 25 IRQ_TYPE_LEVEL_HIGH>,
+                                                     <&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&rcc I2C5_K>;
                                resets = <&rcc I2C5_R>;
                                #address-cells = <1>;
@@ -1360,6 +1364,7 @@
                                       <&dmamux1 116 0x400 0x1>;
                                dma-names = "rx", "tx";
                                st,syscfg-fmp = <&syscfg 0x4 0x10>;
+                               wakeup-source;
                                i2c-analog-filter;
                                access-controllers = <&etzpc 22>;
                                status = "disabled";