mediatek: filogic: migrate Zyxel EX5700 to upstream PHY LED control

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>

diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
index 51147c1d81f2600b043996a6a72e52f067e44c57..c36cc58d5d9474f167a8bac0a8f97eb289a89c7a 100644 (file)
--- a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
+++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
@@ -158,13 +158,45 @@
        phy5: phy@5 {
                compatible = "ethernet-phy-ieee802.3-c45";
                reg = <5>;
-               mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+
+               leds {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led-0 {
+                               reg = <0>;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function = LED_FUNCTION_LAN;
+                       };
+
+                       led-1 {
+                               reg = <1>;
+                               color = <LED_COLOR_ID_AMBER>;
+                               function = LED_FUNCTION_LAN;
+                       };
+               };
        };
 
        phy6: phy@6 {
                compatible = "ethernet-phy-ieee802.3-c45";
                reg = <6>;
-               mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+
+               leds {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led-0 {
+                               reg = <0>;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function = LED_FUNCTION_WAN;
+                       };
+
+                       led-1 {
+                               reg = <1>;
+                               color = <LED_COLOR_ID_AMBER>;
+                               function = LED_FUNCTION_WAN;
+                       };
+               };
        };
 
        switch: switch@1f {

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 5f5668534337c630f6474fe04b19dc618eb26a90..a1205e9556e80f65a9b83d50227e3cbf616e8dbc 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -163,6 +163,12 @@ zyxel,nwa50ax-pro)
        ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:amber:wan" "eth0" "link_10 link_100 link_2500 tx rx"
        ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:green:wan" "eth0" "link_1000 link_2500 tx rx"
        ;;
+zyxel,ex5700-telenor)
+       ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:amber:lan" "lan4" "link_10 link_100 tx rx"
+       ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan" "lan4" "link tx rx"
+       ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:amber:wan" "eth1" "link_10 link_100 tx rx"
+       ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan" "eth1" "link tx rx"
+       ;;
 esac
 
 board_config_flush