--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "I-O DATA WN-DAX3000GR";
+ compatible = "iodata,wn-dax3000gr", "qcom,ipq5018";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-upgrade = &led_status_green;
+ label-mac-device = <&dp1>;
+ };
+
+ chosen {
+ bootargs-append = " root=/dev/ubiblock0_1 coherent_pool=2M";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ button-reset {
+ label = "reset";
+ gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ switch-led-on {
+ label = "led-on";
+ gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ switch-repeater {
+ label = "repeater";
+ gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+
+ switch-ap {
+ label = "ap";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
+ linux,input-type = <EV_SW>;
+ };
+
+ button-wps {
+ label = "wps";
+ gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WPS;
+ };
+
+ led_status_green: led-1 {
+ gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led_status_red: led-2 {
+ gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-3 {
+ gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN_ONLINE;
+ };
+
+ led-4 {
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = "router";
+ };
+
+ led-5 {
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ default-state = "on";
+ };
+
+ led-6 {
+ gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ };
+ };
+
+ reserved-memory {
+ q6_mem_regions: q6_mem_regions@4b000000 {
+ no-map;
+ reg = <0x0 0x4b000000 0x0 0x3000000>;
+ };
+ };
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+ clock-frequency = <24000000>;
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&qfprom {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-engine = <&qpic_nand>;
+
+ /* strength=8 breaks NAND I/O, use 4 instead */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+
+ partition-0-appsblenv {
+ compatible = "fixed-partitions";
+ label = "0:appsblenv";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "env-data";
+ reg = <0x0 0x40000>;
+
+ nvmem-layout {
+ compatible = "u-boot,env";
+
+ macaddr_appsblenv_ethaddr: ethaddr {
+ compatible = "mac-base";
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+ qcom,port_phyinfo {
+ port@0 {
+ port_id = <1>;
+ mdiobus = <&mdio0>;
+ phy_address = <7>;
+ };
+
+ port@1 {
+ port_id = <2>;
+ forced-speed = <1000>;
+ forced-duplex = <1>;
+ };
+ };
+};
+
+&dp1 {
+ status = "okay";
+
+ label = "wan";
+ nvmem-cells = <&macaddr_appsblenv_ethaddr 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp2 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_appsblenv_ethaddr 0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio1_pins>, <&switch_reset_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+ qca8337_0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ qca8337_1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ qca8337_2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ qca8337_3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethernet-switch@18 {
+ compatible = "qca,qca8337";
+ reg = <0x18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&qca8337_0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&qca8337_1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&qca8337_2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <&qca8337_3>;
+ };
+
+ port@6 {
+ reg = <6>;
+ phy-mode = "sgmii";
+ ethernet = <&dp2>;
+ qca,sgmii-enable-pll;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&tlmm {
+ button_pins: button-state {
+ key-pullup-pins {
+ pins = "gpio22", "gpio23", "gpio38";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ key-pulldown-pins {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
+
+ led_pins: led-state {
+ pins = "gpio12", "gpio13", "gpio16", "gpio24",
+ "gpio25", "gpio26", "gpio28";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ mdio1_pins: mdio-state {
+ mdc-pins {
+ pins = "gpio36";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio-pins {
+ pins = "gpio37";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ qpic_pins: qpic-state {
+ clock-pins {
+ pins = "gpio9";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "qspi_cs";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ serial_0_pins: uart0-state {
+ pins = "gpio20", "gpio21";
+ function = "blsp0_uart0";
+ bias-disable;
+ };
+
+ switch_reset_pins: switch-reset-state {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
+
+&tsens {
+ status = "okay";
+};
+
+&q6v5_wcss {
+ status = "okay";
+
+ memory-region = <&q6_mem_regions>;
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
+ "ath11k/IPQ5018/hw1.0/m3_fw.mdt",
+ "ath11k/QCN6122/hw1.0/m3_fw.mdt";
+
+ boot-args = <0x2 4 2 18 0 0>; /* pcie:1, len:4, updid:2, reset:gpio18 */
+
+ q6_wcss_pd1: pd-1 {
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+ resets =
+ <&gcc GCC_WCSSAON_RESET>,
+ <&gcc GCC_WCSS_BCR>,
+ <&gcc GCC_CE_BCR>;
+ reset-names =
+ "wcss_aon_reset",
+ "wcss_reset",
+ "ce_reset";
+
+ clocks =
+ <&gcc GCC_WCSS_AHB_S_CLK>,
+ <&gcc GCC_WCSS_ACMT_CLK>,
+ <&gcc GCC_WCSS_AXI_M_CLK>;
+ clock-names =
+ "gcc_wcss_ahb_s_clk",
+ "gcc_wcss_acmt_clk",
+ "gcc_wcss_axi_m_clk";
+
+ interrupts-extended =
+ <&wcss_smp2p_in 8 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 11 IRQ_TYPE_NONE>;
+ interrupt-names =
+ "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states =
+ <&wcss_smp2p_out 8>,
+ <&wcss_smp2p_out 9>,
+ <&wcss_smp2p_out 10>;
+ qcom,smem-state-names =
+ "shutdown",
+ "stop",
+ "spawn";
+ };
+
+ q6_wcss_pd2: pd-2 {
+ firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+ interrupts-extended =
+ <&wcss_smp2p_in 16 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 17 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 20 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 19 IRQ_TYPE_NONE>;
+ interrupt-names =
+ "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states =
+ <&wcss_smp2p_out 16>,
+ <&wcss_smp2p_out 17>,
+ <&wcss_smp2p_out 18>;
+ qcom,smem-state-names =
+ "shutdown",
+ "stop",
+ "spawn";
+ };
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,rproc = <&q6_wcss_pd1>;
+ qcom,ath11k-calibration-variant = "IODATA-WN-DAX3000GR";
+ qcom,ath11k-fw-memory-mode = <2>;
+ qcom,bdf-addr = <0x4c400000>;
+
+ ieee80211-freq-limit = <2400000 2483000>;
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,rproc = <&q6_wcss_pd2>;
+ qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+ qcom,ath11k-calibration-variant = "IODATA-WN-DAX3000GR";
+ qcom,ath11k-fw-memory-mode = <2>;
+ qcom,bdf-addr = <0x4d100000>;
+ qcom,m3-dump-addr = <0x4df00000>;
+
+ ieee80211-freq-limit = <5150000 5730000>;
+};
projects / thirdparty / openwrt.git / commitdiff
