From: Marek Vasut Date: Sun, 29 Jun 2025 22:07:20 +0000 (+0200) Subject: pwm: argon-fan-hat: Add Argon40 Fan HAT support X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0191c80e8a288d38f3f5a17dd0bb6a3b08c6e464;p=thirdparty%2Fkernel%2Fstable.git pwm: argon-fan-hat: Add Argon40 Fan HAT support Add trivial PWM driver for Argon40 Fan HAT, which is a RaspberryPi blower fan hat which can be controlled over I2C. Model this device as a PWM, so the pwm-fan can be attached to it and handle thermal zones and RPM management in a generic manner. Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20250629220757.936212-3-marek.vasut+renesas@mailbox.org Signed-off-by: Uwe Kleine-König --- diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 6e113f8b4baf2..3ef1757502ebd 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -66,6 +66,15 @@ config PWM_APPLE To compile this driver as a module, choose M here: the module will be called pwm-apple. +config PWM_ARGON_FAN_HAT + tristate "Argon40 Fan HAT support" + depends on I2C && OF + help + Generic PWM framework driver for Argon40 Fan HAT. + + To compile this driver as a module, choose M here: the module + will be called pwm-argon-fan-hat. + config PWM_ATMEL tristate "Atmel PWM support" depends on ARCH_AT91 || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 96160f4257fcb..ff4f47e5fb7a0 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_ADP5585) += pwm-adp5585.o obj-$(CONFIG_PWM_APPLE) += pwm-apple.o +obj-$(CONFIG_PWM_ARGON_FAN_HAT) += pwm-argon-fan-hat.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o diff --git a/drivers/pwm/pwm-argon-fan-hat.c b/drivers/pwm/pwm-argon-fan-hat.c new file mode 100644 index 0000000000000..2c59bd142d40c --- /dev/null +++ b/drivers/pwm/pwm-argon-fan-hat.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Marek Vasut + * + * Limitations: + * - no support for offset/polarity + * - fixed 30 kHz period + * + * Argon Fan HAT https://argon40.com/products/argon-fan-hat + */ + +#include +#include +#include +#include + +#define ARGON40_FAN_HAT_PERIOD_NS 33333 /* ~30 kHz */ + +#define ARGON40_FAN_HAT_REG_DUTY_CYCLE 0x80 + +static int argon_fan_hat_round_waveform_tohw(struct pwm_chip *chip, + struct pwm_device *pwm, + const struct pwm_waveform *wf, + void *_wfhw) +{ + u8 *wfhw = _wfhw; + + if (wf->duty_length_ns > ARGON40_FAN_HAT_PERIOD_NS) + *wfhw = 100; + else + *wfhw = mul_u64_u64_div_u64(wf->duty_length_ns, 100, ARGON40_FAN_HAT_PERIOD_NS); + + return 0; +} + +static int argon_fan_hat_round_waveform_fromhw(struct pwm_chip *chip, + struct pwm_device *pwm, + const void *_wfhw, + struct pwm_waveform *wf) +{ + const u8 *wfhw = _wfhw; + + wf->period_length_ns = ARGON40_FAN_HAT_PERIOD_NS; + wf->duty_length_ns = DIV64_U64_ROUND_UP(wf->period_length_ns * *wfhw, 100); + wf->duty_offset_ns = 0; + + return 0; +} + +static int argon_fan_hat_write_waveform(struct pwm_chip *chip, + struct pwm_device *pwm, + const void *_wfhw) +{ + struct i2c_client *i2c = pwmchip_get_drvdata(chip); + const u8 *wfhw = _wfhw; + + return i2c_smbus_write_byte_data(i2c, ARGON40_FAN_HAT_REG_DUTY_CYCLE, *wfhw); +} + +static const struct pwm_ops argon_fan_hat_pwm_ops = { + .sizeof_wfhw = sizeof(u8), + .round_waveform_fromhw = argon_fan_hat_round_waveform_fromhw, + .round_waveform_tohw = argon_fan_hat_round_waveform_tohw, + .write_waveform = argon_fan_hat_write_waveform, + /* + * The controller does not provide any way to read info back, + * reading from the controller stops the fan, therefore there + * is no .read_waveform here. + */ +}; + +static int argon_fan_hat_i2c_probe(struct i2c_client *i2c) +{ + struct pwm_chip *chip = devm_pwmchip_alloc(&i2c->dev, 1, 0); + int ret; + + if (IS_ERR(chip)) + return PTR_ERR(chip); + + chip->ops = &argon_fan_hat_pwm_ops; + pwmchip_set_drvdata(chip, i2c); + + ret = devm_pwmchip_add(&i2c->dev, chip); + if (ret) + return dev_err_probe(&i2c->dev, ret, "Could not add PWM chip\n"); + + return 0; +} + +static const struct of_device_id argon_fan_hat_dt_ids[] = { + { .compatible = "argon40,fan-hat" }, + { }, +}; +MODULE_DEVICE_TABLE(of, argon_fan_hat_dt_ids); + +static struct i2c_driver argon_fan_hat_driver = { + .driver = { + .name = "argon-fan-hat", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = argon_fan_hat_dt_ids, + }, + .probe = argon_fan_hat_i2c_probe, +}; + +module_i2c_driver(argon_fan_hat_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("Argon40 Fan HAT"); +MODULE_LICENSE("GPL");