From: Hal Feng Date: Thu, 18 Dec 2025 10:21:49 +0000 (+0800) Subject: PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=05a75df4182e301a1b0059606f77b65c74deaa9b;p=thirdparty%2Fkernel%2Flinux.git PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots The driver has been using the "enable-gpios" property to control the 3v3 power supply of PCIe slots. But it is not documented in the dt-bindings and also using GPIO APIs is not a standard way to control PCIe slot power, so use the documented "vpcie3v3-supply" property and regulator APIs to control the slot supply. This change will break the DTs which used "enable-gpio" or "enable-gpios" property under the controller node. Since these properties were not defined in the bindings, it is safe to switch to "vpcie3v3-supply". Any out-of-tree DTS impacted by this change should migrate to "vpcie3v3-supply" instead. Signed-off-by: Hal Feng [mani: reworded description] Signed-off-by: Manivannan Sadhasivam Acked-by: Kevin Xie Link: https://patch.msgid.link/20251218102149.28062-1-hal.feng@starfivetech.com --- diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c index 3caf53c6c0823..298036c3e7f94 100644 --- a/drivers/pci/controller/plda/pcie-starfive.c +++ b/drivers/pci/controller/plda/pcie-starfive.c @@ -55,7 +55,7 @@ struct starfive_jh7110_pcie { struct reset_control *resets; struct clk_bulk_data *clks; struct regmap *reg_syscon; - struct gpio_desc *power_gpio; + struct regulator *vpcie3v3; struct gpio_desc *reset_gpio; struct phy *phy; @@ -153,11 +153,13 @@ static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio), "failed to get perst-gpio\n"); - pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", - GPIOD_OUT_LOW); - if (IS_ERR(pcie->power_gpio)) - return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), - "failed to get power-gpio\n"); + pcie->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3"); + if (IS_ERR(pcie->vpcie3v3)) { + if (PTR_ERR(pcie->vpcie3v3) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(pcie->vpcie3v3), + "failed to get vpcie3v3 regulator\n"); + pcie->vpcie3v3 = NULL; + } return 0; } @@ -270,8 +272,8 @@ static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda) container_of(plda, struct starfive_jh7110_pcie, plda); starfive_pcie_clk_rst_deinit(pcie); - if (pcie->power_gpio) - gpiod_set_value_cansleep(pcie->power_gpio, 0); + if (pcie->vpcie3v3) + regulator_disable(pcie->vpcie3v3); starfive_pcie_disable_phy(pcie); } @@ -304,8 +306,11 @@ static int starfive_pcie_host_init(struct plda_pcie_rp *plda) if (ret) return ret; - if (pcie->power_gpio) - gpiod_set_value_cansleep(pcie->power_gpio, 1); + if (pcie->vpcie3v3) { + ret = regulator_enable(pcie->vpcie3v3); + if (ret) + dev_err_probe(dev, ret, "failed to enable vpcie3v3 regulator\n"); + } if (pcie->reset_gpio) gpiod_set_value_cansleep(pcie->reset_gpio, 1);