From: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: Fri, 12 Dec 2025 15:38:25 +0000 (+0200)
Subject: dt-bindings: iio: amplifiers: add adl8113
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=09140a720e00e7498435796b4ed648ca3a71cf59;p=thirdparty%2Fkernel%2Flinux.git

dt-bindings: iio: amplifiers: add adl8113

Add devicetree bindings for the ADL8113 Low Noise Amplifier.

The bindings include support for specifying gain values of external
amplifiers connected to the two external bypass paths (A and B). These
optional properties allow the gain values to be selectable via the
hardwaregain attribute, enabling complete devicetree description of
the signal chain including external components.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
new file mode 100644
index 0000000000000..6b8491d181398
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,adl8113.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADL8113 Low Noise Amplifier with integrated bypass switches
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADL8113 is a 10MHz to 12GHz Low Noise Amplifier with integrated bypass
+  switches controlled by two GPIO pins (VA and VB). The device supports four
+  operation modes:
+    - Internal Amplifier: VA=0, VB=0 - Signal passes through the internal LNA
+    - Internal Bypass: VA=1, VB=1 - Signal bypasses through internal path
+    - External Bypass A: VA=0, VB=1 - Signal routes from RFIN to OUT_A and from IN_A to RFOUT
+    - External Bypass B: VA=1, VB=0 - Signal routes from RFIN to OUT_B and from IN_B to RFOUT
+
+    https://www.analog.com/en/products/adl8113.html
+
+properties:
+  compatible:
+    const: adi,adl8113
+
+  vdd1-supply: true
+
+  vdd2-supply: true
+
+  vss2-supply: true
+
+  ctrl-gpios:
+    items:
+      - description: VA control pin
+      - description: VB control pin
+
+  adi,external-bypass-a-gain-db:
+    description:
+      Gain in dB of external amplifier connected to bypass path A (OUT_A/IN_A).
+      When specified, this gain value becomes selectable via the hardwaregain
+      attribute and automatically routes through the external A path.
+
+  adi,external-bypass-b-gain-db:
+    description:
+      Gain in dB of external amplifier connected to bypass path B (OUT_B/IN_B).
+      When specified, this gain value becomes selectable via the hardwaregain
+      attribute and automatically routes through the external B path.
+
+required:
+  - compatible
+  - ctrl-gpios
+  - vdd1-supply
+  - vdd2-supply
+  - vss2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* Basic configuration with only internal paths */
+    amplifier {
+        compatible = "adi,adl8113";
+        ctrl-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>,
+                     <&gpio 23 GPIO_ACTIVE_HIGH>;
+        vdd1-supply = <&vdd1_5v>;
+        vdd2-supply = <&vdd2_3v3>;
+        vss2-supply = <&vss2_neg>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* Configuration with external bypass amplifiers */
+    amplifier {
+        compatible = "adi,adl8113";
+        ctrl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>,
+                     <&gpio 25 GPIO_ACTIVE_HIGH>;
+        vdd1-supply = <&vdd1_5v>;
+        vdd2-supply = <&vdd2_3v3>;
+        vss2-supply = <&vss2_neg>;
+        adi,external-bypass-a-gain-db = <20>;  /* 20dB external amp on path A */
+        adi,external-bypass-b-gain-db = <6>;   /* 6dB external amp on path B */
+    };
+...