From: Purushottam Kushwaha Date: Fri, 7 Jun 2024 11:10:16 +0000 (+0530) Subject: Vendor command extension for Responder PM Mode bit in TWT SET Request X-Git-Tag: hostap_2_11~81 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0cb42655fb06e2c3cdae148b4fddd8a1c634e470;p=thirdparty%2Fhostap.git Vendor command extension for Responder PM Mode bit in TWT SET Request Use the existing QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE attribute for TWT setup request to configure the Responder PM Mode bit in the control field of the TWT element or broadcast TWT schedule. Signed-off-by: Purushottam Kushwaha --- diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index 6ac31aa3e..f7bc107a2 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -10846,10 +10846,13 @@ enum qca_wlan_twt_setup_state { * * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE: Optional (u8) * This attribute contains the value of the Responder PM Mode subfield (0 or 1) - * from TWT response frame. + * from TWT response frame. During TWT setup request, this attribute is used to + * configure the Responder PM Mode bit in the control field of the TWT element + * for broadcast TWT schedule. * This parameter is used for * 1. TWT SET Response * 2. TWT GET Response + * 3. TWT SET Request * * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_ANNOUNCE_TIMEOUT: Optional (u32) * This attribute is used to configure the announce timeout value (in us) in