From: Ian Abbott Date: Fri, 30 Jan 2026 16:47:35 +0000 (+0000) Subject: comedi: comedi_parport: Add sanity checks for I/O base address X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=118fb051de0129e0565880119dd7fe64b233f969;p=thirdparty%2Fkernel%2Flinux.git comedi: comedi_parport: Add sanity checks for I/O base address The "comedi_parport" driver treats a standard printer parallel port as a COMEDI digital I/O device, driving the port's I/O registers directly. It uses an admin-supplied configuration option (`it->options[0]`) to configure the I/O port base address of the device. Currently, the driver allows any I/O base address to be specified as long as the I/O region can be reserved, and it converts the specified `int` option value holding the base address to `unsigned long`. It doesn't make sense to allow base addresses that are not aligned to 4-byte boundaries (for SPP printer ports, although printer ports with EPP/ECP support actually need to be aligned on 8-byte boundaries), so add a check for 4-byte alignment. Convert the option value that specifies the base address from `int` to `unsigned int` instead of `unsigned long` so it ends up the same on 32-bit and 64-bit systems. Signed-off-by: Ian Abbott Link: https://patch.msgid.link/20260130170416.49994-11-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/comedi/drivers/comedi_parport.c b/drivers/comedi/drivers/comedi_parport.c index 098738a688fe..2604680d86c4 100644 --- a/drivers/comedi/drivers/comedi_parport.c +++ b/drivers/comedi/drivers/comedi_parport.c @@ -225,9 +225,11 @@ static int parport_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *s; + unsigned int iobase = it->options[0]; int ret; - ret = comedi_request_region(dev, it->options[0], 0x03); + ret = comedi_check_request_region(dev, iobase, 0x03, + 0, UINT_MAX, 4); if (ret) return ret;