From: Kunihiko Hayashi Date: Mon, 27 Jan 2025 01:38:18 +0000 (+0900) Subject: net: stmmac: Limit the number of MTL queues to hardware capability X-Git-Tag: v6.13.2~87 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=13c61cfeb65f4a138388cc18c2df68bc80316546;p=thirdparty%2Fkernel%2Fstable.git net: stmmac: Limit the number of MTL queues to hardware capability [ Upstream commit f5fb35a3d6b36d378b2e2ecbfb9caa337d5428e6 ] The number of MTL queues to use is specified by the parameter "snps,{tx,rx}-queues-to-use" from stmmac_platform layer. However, the maximum numbers of queues are constrained by upper limits determined by the capability of each hardware feature. It's appropriate to limit the values not to exceed the upper limit values and display a warning message. This only works if the hardware capability has the upper limit values. Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration") Signed-off-by: Kunihiko Hayashi Reviewed-by: Yanteng Si Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c81ea8cdfe6eb..17a5be4f57c8d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7175,6 +7175,21 @@ static int stmmac_hw_init(struct stmmac_priv *priv) if (priv->dma_cap.tsoen) dev_info(priv->device, "TSO supported\n"); + if (priv->dma_cap.number_rx_queues && + priv->plat->rx_queues_to_use > priv->dma_cap.number_rx_queues) { + dev_warn(priv->device, + "Number of Rx queues (%u) exceeds dma capability\n", + priv->plat->rx_queues_to_use); + priv->plat->rx_queues_to_use = priv->dma_cap.number_rx_queues; + } + if (priv->dma_cap.number_tx_queues && + priv->plat->tx_queues_to_use > priv->dma_cap.number_tx_queues) { + dev_warn(priv->device, + "Number of Tx queues (%u) exceeds dma capability\n", + priv->plat->tx_queues_to_use); + priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues; + } + priv->hw->vlan_fail_q_en = (priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN); priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;