From: Ralf Wildenhues Date: Wed, 20 Jul 2011 21:31:54 +0000 (+0200) Subject: Sync auxiliary files from upstream. X-Git-Tag: v1.11.1b~26^2 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=158e1d9b450600f15226eefc5b7a026478e1500b;p=thirdparty%2Fautomake.git Sync auxiliary files from upstream. * INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub, lib/texinfo.tex: Sync from upstream. Signed-off-by: Ralf Wildenhues --- diff --git a/ChangeLog b/ChangeLog index f2db655a8..eddefc2ab 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,9 @@ +2011-07-20 Ralf Wildenhues + + Sync auxiliary files from upstream. + * INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub, + lib/texinfo.tex: Sync from upstream. + 2011-07-08 Stefano Lattarini tests: fix weakness in 'tests-environment-backcompat.test' diff --git a/lib/INSTALL b/lib/INSTALL index 81fd332ce..a1e89e18a 100644 --- a/lib/INSTALL +++ b/lib/INSTALL @@ -1,8 +1,8 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright @@ -226,6 +226,11 @@ order to use an ANSI C compiler: and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended diff --git a/lib/config-ml.in b/lib/config-ml.in index 2dd0d5181..11983461c 100644 --- a/lib/config-ml.in +++ b/lib/config-ml.in @@ -2,7 +2,7 @@ # wanting multilib support. # # Copyright (C) 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2010, 2011 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -224,19 +224,6 @@ done # $host here, not $target. case "${host}" in -arc-*-elf*) - if [ x$enable_biendian != xyes ] - then - old_multidirs=${multidirs} - multidirs="" - for x in ${old_multidirs}; do - case "${x}" in - *be*) : ;; - *) multidirs="${multidirs} ${x}" ;; - esac - done - fi - ;; arm-*-*) if [ x"$enable_fpu" = xno ] then diff --git a/lib/config.guess b/lib/config.guess index 4c8f032e7..b02565c7b 100755 --- a/lib/config.guess +++ b/lib/config.guess @@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -# Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011 Free Software Foundation, Inc. -timestamp='2010-09-24' +timestamp='2011-06-03' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -57,7 +57,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -92,7 +92,7 @@ if test $# != 0; then exit 1 fi -trap 'exit 1' HUP INT TERM +trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires @@ -106,7 +106,7 @@ trap 'exit 1' HUP INT TERM set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" HUP INT PIPE TERM ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || @@ -181,7 +181,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in fi ;; *) - os=netbsd + os=netbsd ;; esac # The OS release @@ -224,7 +224,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on @@ -270,7 +270,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead @@ -296,7 +299,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in echo s390-ibm-zvmoe exit ;; *:OS400:*:*) - echo powerpc-ibm-os400 + echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} @@ -395,23 +398,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; @@ -481,8 +484,8 @@ EOF echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ @@ -495,7 +498,7 @@ EOF else echo i586-dg-dgux${UNAME_RELEASE} fi - exit ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; @@ -595,52 +598,52 @@ EOF 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac + esac ;; + esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + sed 's/^ //' << EOF >$dummy.c - #define _HPUX_SOURCE - #include - #include + #define _HPUX_SOURCE + #include + #include - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa @@ -731,22 +734,22 @@ EOF exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; @@ -770,14 +773,14 @@ EOF exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} @@ -805,14 +808,14 @@ EOF echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) - case ${UNAME_MACHINE} in + case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; @@ -867,7 +870,7 @@ EOF EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; - esac + esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} @@ -879,7 +882,13 @@ EOF then echo ${UNAME_MACHINE}-unknown-linux-gnu else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi fi exit ;; avr32*:Linux:*:*) @@ -892,7 +901,7 @@ EOF echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) - echo frv-unknown-linux-gnu + echo frv-unknown-linux-gnu exit ;; i*86:Linux:*:*) LIBC=gnu @@ -960,7 +969,7 @@ EOF echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu @@ -969,7 +978,7 @@ EOF echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; tile*:Linux:*:*) - echo ${UNAME_MACHINE}-tilera-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu @@ -978,7 +987,7 @@ EOF echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. @@ -987,11 +996,11 @@ EOF echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. + # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) @@ -1023,7 +1032,7 @@ EOF fi exit ;; i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; @@ -1051,13 +1060,13 @@ EOF exit ;; pc:*:*:*) # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp - exit ;; + exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; @@ -1092,8 +1101,8 @@ EOF /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ @@ -1136,10 +1145,10 @@ EOF echo ns32k-sni-sysv fi exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm @@ -1165,11 +1174,11 @@ EOF exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} + echo mips-nec-sysv${UNAME_RELEASE} else - echo mips-unknown-sysv${UNAME_RELEASE} + echo mips-unknown-sysv${UNAME_RELEASE} fi - exit ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; @@ -1282,13 +1291,13 @@ EOF echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} + echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` + UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; @@ -1328,11 +1337,11 @@ main () #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 - "4" + "4" #else - "" + "" #endif - ); exit (0); + ); exit (0); #endif #endif diff --git a/lib/config.sub b/lib/config.sub index 3ec94f181..f9fcdc879 100755 --- a/lib/config.sub +++ b/lib/config.sub @@ -1,10 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -# Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011 Free Software Foundation, Inc. -timestamp='2010-12-11' +timestamp='2011-06-03' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -76,7 +76,7 @@ version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -158,8 +158,8 @@ case $os in os= basic_machine=$1 ;; - -bluegene*) - os=-cnk + -bluegene*) + os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= @@ -175,10 +175,10 @@ case $os in os=-chorusos basic_machine=$1 ;; - -chorusrdb) - os=-chorusrdb + -chorusrdb) + os=-chorusrdb basic_machine=$1 - ;; + ;; -hiux*) os=-hiuxwe2 ;; @@ -286,9 +286,10 @@ case $basic_machine in | nds32 | nds32le | nds32be \ | nios | nios2 \ | ns16k | ns32k \ + | open8 \ | or32 \ | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | rx \ | score \ @@ -296,12 +297,12 @@ case $basic_machine in | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ - | v850 | v850e \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; @@ -325,6 +326,18 @@ case $basic_machine in basic_machine=mt-unknown ;; + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. @@ -382,24 +395,26 @@ case $basic_machine in | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile-* | tilegx-* \ + | tile*-* \ | tron-* \ | ubicom32-* \ - | v850-* | v850e-* | vax-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) @@ -424,7 +439,7 @@ case $basic_machine in basic_machine=a29k-amd os=-udi ;; - abacus) + abacus) basic_machine=abacus-unknown ;; adobe68k) @@ -507,7 +522,7 @@ case $basic_machine in basic_machine=c90-cray os=-unicos ;; - cegcc) + cegcc) basic_machine=arm-unknown os=-cegcc ;; @@ -755,7 +770,7 @@ case $basic_machine in basic_machine=ns32k-utek os=-sysv ;; - microblaze) + microblaze) basic_machine=microblaze-xilinx ;; mingw32) @@ -862,10 +877,10 @@ case $basic_machine in np1) basic_machine=np1-gould ;; - neo-tandem) + neo-tandem) basic_machine=neo-tandem ;; - nse-tandem) + nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) @@ -950,9 +965,10 @@ case $basic_machine in ;; power) basic_machine=power-ibm ;; - ppc) basic_machine=powerpc-unknown + ppc | ppcbe) basic_machine=powerpc-unknown ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown @@ -1046,6 +1062,9 @@ case $basic_machine in basic_machine=i860-stratus os=-sysv4 ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; sun2) basic_machine=m68000-sun ;; @@ -1102,13 +1121,8 @@ case $basic_machine in basic_machine=t90-cray os=-unicos ;; - # This must be matched before tile*. - tilegx*) - basic_machine=tilegx-unknown - os=-linux-gnu - ;; tile*) - basic_machine=tile-unknown + basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) @@ -1178,6 +1192,9 @@ case $basic_machine in xps | xps100) basic_machine=xps100-honeywell ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; ymp) basic_machine=ymp-cray os=-unicos @@ -1275,11 +1292,11 @@ esac if [ x"$os" != x"" ] then case $os in - # First match some system type aliases - # that might get confused with valid system types. + # First match some system type aliases + # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux + -auroraux) + os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` @@ -1364,7 +1381,7 @@ case $os in -opened*) os=-openedition ;; - -os400*) + -os400*) os=-os400 ;; -wince*) @@ -1413,7 +1430,7 @@ case $os in -sinix*) os=-sysv4 ;; - -tpf*) + -tpf*) os=-tpf ;; -triton*) @@ -1458,8 +1475,8 @@ case $os in -dicos*) os=-dicos ;; - -nacl*) - ;; + -nacl*) + ;; -none) ;; *) @@ -1482,10 +1499,10 @@ else # system, and we'll never get to this point. case $basic_machine in - score-*) + score-*) os=-elf ;; - spu-*) + spu-*) os=-elf ;; *-acorn) @@ -1497,8 +1514,8 @@ case $basic_machine in arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff + c4x-* | tic4x-*) + os=-coff ;; tic54x-*) os=-coff @@ -1534,7 +1551,7 @@ case $basic_machine in m68*-cisco) os=-aout ;; - mep-*) + mep-*) os=-elf ;; mips*-cisco) @@ -1561,7 +1578,7 @@ case $basic_machine in *-ibm) os=-aix ;; - *-knuth) + *-knuth) os=-mmixware ;; *-wec) diff --git a/lib/texinfo.tex b/lib/texinfo.tex index 1130b8fc5..fd22fd685 100644 --- a/lib/texinfo.tex +++ b/lib/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2010-12-23.17} +\def\texinfoversion{2011-05-23.16} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -118,8 +118,8 @@ \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordin\undefined \gdef\putwordin{in}\fi -\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi -\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi @@ -158,15 +158,18 @@ \def\spaceisspace{\catcode`\ =\spacecat} % sometimes characters are active, so we need control sequences. +\chardef\ampChar = `\& \chardef\colonChar = `\: \chardef\commaChar = `\, \chardef\dashChar = `\- \chardef\dotChar = `\. \chardef\exclamChar= `\! +\chardef\hashChar = `\# \chardef\lquoteChar= `\` \chardef\questChar = `\? \chardef\rquoteChar= `\' \chardef\semiChar = `\; +\chardef\slashChar = `\/ \chardef\underChar = `\_ % Ignore a token. @@ -215,7 +218,7 @@ \tracingmacros2 \tracingrestores1 \showboxbreadth\maxdimen \showboxdepth\maxdimen - \ifx\eTeXversion\undefined\else % etex gives us more logging + \ifx\eTeXversion\thisisundefined\else % etex gives us more logging \tracingscantokens1 \tracingifs1 \tracinggroups1 @@ -545,7 +548,7 @@ } \def\inenvironment#1{% \ifx#1\empty - out of any environment% + outside of any environment% \else in environment \expandafter\string#1% \fi @@ -557,7 +560,7 @@ \parseargdef\end{% \if 1\csname iscond.#1\endcsname \else - % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + % The general wording of \badenverr may not be ideal. \expandafter\checkenv\csname#1\endcsname \csname E#1\endcsname \endgroup @@ -608,7 +611,7 @@ \else\ifx\temp\offword \plainnonfrenchspacing \else \errhelp = \EMsimple - \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \errmessage{Unknown @frenchspacing option `\temp', must be on|off}% \fi\fi } @@ -690,15 +693,6 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in -% Old definition--didn't work. -%\parseargdef\need{\par % -%% This method tries to make TeX break the page naturally -%% if the depth of the box does not fit. -%{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak -%\prevdepth=-1000pt -%}} - \parseargdef\need{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. @@ -849,6 +843,7 @@ where each line of input produces a line of output.} \makevalueexpandable % we want to expand any @value in FILE. \turnoffactive % and allow special characters in the expansion \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @include of #1^^J}% \edef\temp{\noexpand\input #1 }% % % This trickery is to read FILE outside of a group, in case it makes @@ -1078,9 +1073,8 @@ where each line of input produces a line of output.} \newif\ifpdfmakepagedest % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 -% can be set). So we test for \relax and 0 as well as \undefined, -% borrowed from ifpdf.sty. -\ifx\pdfoutput\undefined +% can be set). So we test for \relax and 0 as well as being undefined. +\ifx\pdfoutput\thisisundefined \else \ifx\pdfoutput\relax \else @@ -1512,7 +1506,7 @@ output) for that.)} % if we are producing pdf, and we have \pdffontattr, then define cmaps. % (\pdffontattr was introduced many years ago, but people still run % older pdftex's; it's easy to conditionalize, so we do.) -\ifpdf \ifx\pdffontattr\undefined \else +\ifpdf \ifx\pdffontattr\thisisundefined \else \begingroup \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap @@ -1779,7 +1773,7 @@ end % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix % before you read in texinfo.tex. -\ifx\fontprefix\undefined +\ifx\fontprefix\thisisundefined \def\fontprefix{cm} \fi % Support font families that don't use the same naming scheme as CM. @@ -2070,7 +2064,7 @@ end % \parseargdef\fonttextsize{% \def\textsizearg{#1}% - \wlog{doing @fonttextsize \textsizearg}% + %\wlog{doing @fonttextsize \textsizearg}% % % Set \globaldefs so that documents can use this inside @tex, since % makeinfo 4.8 does not support it, but we need it nonetheless. @@ -2252,12 +2246,14 @@ end % Markup style setup for left and right quotes. \defmarkupstylesetup\markupsetuplq{% - \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname + \expandafter\let\expandafter \temp + \csname markupsetuplq\currentmarkupstyle\endcsname \ifx\temp\relax \markupsetuplqdefault \else \temp \fi } \defmarkupstylesetup\markupsetuprq{% - \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname + \expandafter\let\expandafter \temp + \csname markupsetuprq\currentmarkupstyle\endcsname \ifx\temp\relax \markupsetuprqdefault \else \temp \fi } @@ -2291,12 +2287,11 @@ end \let\markupsetuplqkbd \markupsetnoligaturesquoteleft -% Allow an option to not replace quotes with a regular directed right -% quote/apostrophe (char 0x27), but instead use the undirected quote -% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it -% the default, but it works for pasting with more pdf viewers (at least -% evince), the lilypond developers report. xpdf does work with the -% regular 0x27. +% Allow an option to not use regular directed right quote/apostrophe +% (char 0x27), but instead the undirected quote from cmtt (char 0x0d). +% The undirected quote is ugly, so don't make it the default, but it +% works for pasting with more pdf viewers (at least evince), the +% lilypond developers report. xpdf does work with the regular 0x27. % \def\codequoteright{% \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax @@ -2320,6 +2315,36 @@ end \else \char'22 \fi } +% Commands to set the quote options. +% +\parseargdef\codequoteundirected{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}% + \fi\fi +} +% +\parseargdef\codequotebacktick{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}% + \fi\fi +} + % [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. \def\noligaturesquoteleft{\relax\lq} @@ -2487,6 +2512,8 @@ end } } +\def\codex #1{\tclose{#1}\endgroup} + \def\realdash{-} \def\codedash{-\discretionary{}{}{}} \def\codeunder{% @@ -2500,7 +2527,6 @@ end \discretionary{}{}{}}% {\_}% } -\def\codex #1{\tclose{#1}\endgroup} % An additional complication: the above will allow breaks after, e.g., % each of the four underscores in __typeof__. This is undesirable in @@ -2520,63 +2546,18 @@ end \allowcodebreaksfalse \else \errhelp = \EMsimple - \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}% \fi\fi } -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. -\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\parseargdef\kbdinputstyle{% - \def\txiarg{#1}% - \ifx\txiarg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\txiarg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\txiarg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \else - \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\txiarg'}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is `distinct'. -\kbdinputstyle distinct - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} - -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code - -% @clicksequence{File @click{} Open ...} -\def\clicksequence#1{\begingroup #1\endgroup} - -% @clickstyle @arrow (by default) -\parseargdef\clickstyle{\def\click{#1}} -\def\click{\arrow} - % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. Perhaps eventually put in -% a hypertex \special here. -% -\def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{\begingroup +% itself. First (mandatory) arg is the url. +% (This \urefnobreak definition isn't used now, leaving it for a while +% for comparison.) +\def\urefnobreak#1{\dourefnobreak #1,,,\finish} +\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup \unsepspaces \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% @@ -2597,6 +2578,103 @@ end \endlink \endgroup} +% This \urefbreak definition is the active one. +\def\urefbreak{\begingroup \urefcatcodes \dourefbreak} +\let\uref=\urefbreak +\def\dourefbreak#1{\urefbreakfinish #1,,,\finish} +\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \urefcode{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% Allow line breaks around only a few characters (only). +\def\urefcatcodes{% + \catcode\ampChar=\active \catcode\dotChar=\active + \catcode\hashChar=\active \catcode\questChar=\active + \catcode\slashChar=\active +} +{ + \urefcatcodes + % + \global\def\urefcode{\begingroup + \setupmarkupstyle{code}% + \urefcatcodes + \let&\urefcodeamp + \let.\urefcodedot + \let#\urefcodehash + \let?\urefcodequest + \let/\urefcodeslash + \codex + } + % + % By default, they are just regular characters. + \global\def&{\normalamp} + \global\def.{\normaldot} + \global\def#{\normalhash} + \global\def?{\normalquest} + \global\def/{\normalslash} +} + +% we put a little stretch before and after the breakable chars, to help +% line breaking of long url's. The unequal skips make look better in +% cmtt at least, especially for dots. +\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } +\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +% +\def\urefcodeamp{\urefprestretch \&\urefpoststretch} +\def\urefcodedot{\urefprestretch .\urefpoststretch} +\def\urefcodehash{\urefprestretch \#\urefpoststretch} +\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeslash{\futurelet\next\urefcodeslashfinish} +{ + \catcode`\/=\active + \global\def\urefcodeslashfinish{% + \urefprestretch \slashChar + % Allow line break only after the final / in a sequence of + % slashes, to avoid line break between the slashes in http://. + \ifx\next/\else \urefpoststretch \fi + } +} + +% One more complication: by default we'll break after the special +% characters, but some people like to break before the special chars, so +% allow that. Also allow no breaking at all, for manual control. +% +\parseargdef\urefbreakstyle{% + \def\txiarg{#1}% + \ifx\txiarg\wordnone + \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordbefore + \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordafter + \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \else + \errhelp = \EMsimple + \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\wordafter{after} +\def\wordbefore{before} +\def\wordnone{none} + +\urefbreakstyle after + % @url synonym for @uref, since that's how everyone uses it. % \let\url=\uref @@ -2618,6 +2696,51 @@ end \let\email=\uref \fi +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +\def\xkey{\key} +\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% +\ifx\one\xkey\ifx\threex\three \key{#2}% +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} + +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code +\let\env=\code +\let\command=\code + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + % Typeset a dimension, e.g., `in' or `pt'. The only reason for the % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % @@ -3005,7 +3128,7 @@ end % Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 % so we'll define it if necessary. % -\ifx\Orb\undefined +\ifx\Orb\thisisundefined \def\Orb{\mathhexbox20D} \fi @@ -3033,8 +3156,9 @@ end \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} +\parseargdef\shorttitlepage{% + \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} \envdef\titlepage{% % Open one extra group, as we want to close it in the middle of \Etitlepage. @@ -3094,7 +3218,7 @@ end \finishedtitlepagetrue } -%%% Macros to be used within @titlepage: +% Macros to be used within @titlepage: \let\subtitlerm=\tenrm \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} @@ -3127,7 +3251,7 @@ end } -%%% Set up page headings and footings. +% Set up page headings and footings. \let\thispage=\folio @@ -3279,7 +3403,7 @@ end % This produces Day Month Year style of output. % Only define if not already defined, in case a txi-??.tex file has set % up a different format (e.g., txi-cs.tex does this). -\ifx\today\undefined +\ifx\today\thisisundefined \def\today{% \number\day\space \ifcase\month @@ -3826,9 +3950,9 @@ end \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 \fi -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. +% Test to see if parskip is larger than space between lines of +% table. If not, do nothing. +% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller @@ -5242,7 +5366,8 @@ end \global\let\subsubsection = \appendixsubsubsec } -\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +% normally unnmhead0 calls unnumberedzzz: +\outer\parseargdef\unnumbered{\unnmhead0{#1}} \def\unnumberedzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 \global\advance\unnumberedno by 1 @@ -5286,40 +5411,47 @@ end \let\top\unnumbered % Sections. +% \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz \def\seczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% } -\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +% normally calls appendixsectionzzz: +\outer\parseargdef\appendixsection{\apphead1{#1}} \def\appendixsectionzzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% } \let\appendixsec\appendixsection -\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +% normally calls unnumberedseczzz: +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} \def\unnumberedseczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% } % Subsections. -\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +% +% normally calls numberedsubseczzz: +\outer\parseargdef\numberedsubsec{\numhead2{#1}} \def\numberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% } -\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +% normally calls appendixsubseczzz: +\outer\parseargdef\appendixsubsec{\apphead2{#1}} \def\appendixsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno}% } -\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +% normally calls unnumberedsubseczzz: +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} \def\unnumberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynothing}% @@ -5327,21 +5459,25 @@ end } % Subsubsections. -\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +% +% normally numberedsubsubseczzz: +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} \def\numberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynumbered}% {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +% normally appendixsubsubseczzz: +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} \def\appendixsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +% normally unnumberedsubsubseczzz: +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} \def\unnumberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynothing}% @@ -5391,14 +5527,13 @@ end % (including whitespace, linebreaking, etc. around it), % given all the information in convenient, parsed form. -%%% Args are the skip and penalty (usually negative) +% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -%%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) - \newskip\chapheadingskip +% Define plain chapter starts, and page on/off switching for it. \def\chapbreak{\dobreak \chapheadingskip {-4000}} \def\chappager{\par\vfill\supereject} % Because \domark is called before \chapoddpage, the filler page will @@ -5601,6 +5736,8 @@ end % \def\sectionheading#1#2#3#4{% {% + \checkenv{}% should not be in an environment. + % % Switch to the right set of fonts. \csname #2fonts\endcsname \rmisbold % @@ -6346,7 +6483,7 @@ end % \def\Equotation{% \par - \ifx\quotationauthor\undefined\else + \ifx\quotationauthor\thisisundefined\else % indent a bit. \leftline{\kern 2\leftskip \sl ---\quotationauthor}% \fi @@ -6505,6 +6642,7 @@ end \makevalueexpandable \setupverbatim \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% \input #1 \afterenvbreak }% @@ -6554,7 +6692,7 @@ end % commands also insert a nobreak penalty, and we don't want to allow % a break between a section heading and a defun. % - % As a minor refinement, we avoid "club" headers by signalling + % As a further refinement, we avoid "club" headers by signalling % with penalty of 10003 after the very first @deffn in the % sequence (see above), and penalty of 10002 after any following % @def command. @@ -6621,13 +6759,36 @@ end \def\domakedefun#1#2#3{% \envdef#1{% \startdefun + \doingtypefnfalse % distinguish typed functions from all else \parseargusing\activeparens{\printdefunline#3}% }% \def#2{\dodefunx#1}% \def#3% } -%%% Untyped functions: +\newif\ifdoingtypefn % doing typed function? +\newif\ifrettypeownline % typeset return type on its own line? + +% @deftypefnnewline on|off says whether the return type of typed functions +% are printed on their own line. This affects @deftypefn, @deftypefun, +% @deftypeop, and @deftypemethod. +% +\parseargdef\deftypefnnewline{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @txideftypefnnl value `\temp', + must be on|off}% + \fi\fi +} + +% Untyped functions: % @deffn category name args \makedefun{deffn}{\deffngeneral{}} @@ -6646,7 +6807,7 @@ end \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } -%%% Typed functions: +% Typed functions: % @deftypefn category type name args \makedefun{deftypefn}{\deftypefngeneral{}} @@ -6661,10 +6822,11 @@ end % \def\deftypefngeneral#1#2 #3 #4 #5\endheader{% \dosubind{fn}{\code{#4}}{#1}% + \doingtypefntrue \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Typed variables: +% Typed variables: % @deftypevr category type var args \makedefun{deftypevr}{\deftypecvgeneral{}} @@ -6682,7 +6844,7 @@ end \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Untyped variables: +% Untyped variables: % @defvr category var args \makedefun{defvr}#1 {\deftypevrheader{#1} {} } @@ -6693,7 +6855,8 @@ end % \defcvof {category of}class var args \def\defcvof#1#2 {\deftypecvof{#1}#2 {} } -%%% Type: +% Types: + % @deftp category name args \makedefun{deftp}#1 #2 #3\endheader{% \doind{tp}{\code{#2}}% @@ -6721,25 +6884,49 @@ end % We are followed by (but not passed) the arguments, if any. % \def\defname#1#2#3{% + \par % Get the values of \leftskip and \rightskip as they were outside the @def... \advance\leftskip by -\defbodyindent % - % How we'll format the type name. Putting it in brackets helps + % Determine if we are typesetting the return type of a typed function + % on a line by itself. + \rettypeownlinefalse + \ifdoingtypefn % doing a typed function specifically? + % then check user option for putting return type on its own line: + \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else + \rettypeownlinetrue + \fi + \fi + % + % How we'll format the category name. Putting it in brackets helps % distinguish it from the body text that may end up on the next line % just below it. \def\temp{#1}% \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} % - % Figure out line sizes for the paragraph shape. + % Figure out line sizes for the paragraph shape. We'll always have at + % least two. + \tempnum = 2 + % % The first line needs space for \box0; but if \rightskip is nonzero, % we need only space for the part of \box0 which exceeds it: \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % + % If doing a return type on its own line, we'll have another line. + \ifrettypeownline + \advance\tempnum by 1 + \def\maybeshapeline{0in \hsize}% + \else + \def\maybeshapeline{}% + \fi + % % The continuations: \dimen2=\hsize \advance\dimen2 by -\defargsindent - % (plain.tex says that \dimen1 should be used only as global.) - \parshape 2 0in \dimen0 \defargsindent \dimen2 % - % Put the type name to the right margin. + % The final paragraph shape: + \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2 + % + % Put the category name at the right margin. \noindent \hbox to 0pt{% \hfil\box0 \kern-\hsize @@ -6761,8 +6948,16 @@ end % . this still does not fix the ?` and !` ligatures, but so far no % one has made identifiers using them :). \df \tt - \def\temp{#2}% return value type - \ifx\temp\empty\else \tclose{\temp} \fi + \def\temp{#2}% text of the return type + \ifx\temp\empty\else + \tclose{\temp}% typeset the return type + \ifrettypeownline + % put return type on its own line; prohibit line break following: + \hfil\vadjust{\nobreak}\break + \else + \space % type on same line, so just followed by a space + \fi + \fi % no return type #3% output function name }% {\rm\enskip}% hskip 0.5 em of \tenrm @@ -6880,7 +7075,7 @@ end % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. -\ifx\eTeXversion\undefined +\ifx\eTeXversion\thisisundefined \newwrite\macscribble \def\scantokens#1{% \toks0={#1}% @@ -6905,12 +7100,14 @@ end % ... and for \example: \spaceisspace % - % The \empty here causes a following catcode 5 newline to be eaten - % as part of reading whitespace after a control sequence. It does - % not eat a catcode 13 newline. There's no good way to handle the - % two cases. See the Macro Details node in the manual for the - % workaround we currently have to recommend for macros and + % The \empty here causes a following catcode 5 newline to be eaten as + % part of reading whitespace after a control sequence. It does not + % eat a catcode 13 newline. There's no good way to handle the two + % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX + % would then have different behavior). See the Macro Details node in + % the manual for the workaround we recommend for macros and % line-oriented commands. + % \scantokens{#1\empty}% \endgroup} @@ -7235,7 +7432,8 @@ end % @inforef is relatively simple. \def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, +\def\inforefzzz #1,#2,#3,#4**{% + \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} % @node's only job in TeX is to define \lastnode, which is used in @@ -7296,11 +7494,32 @@ end \toks0 = \expandafter{\lastsection}% \immediate \writexrdef{title}{\the\toks0 }% \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout }% \fi } +% @xrefautosectiontitle on|off says whether @section(ing) names are used +% automatically in xrefs, if the third arg is not explicitly specified. +% This was provided as a "secret" @set xref-automatic-section-title +% variable, now it's official. +% +\parseargdef\xrefautomaticsectiontitle{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @xrefautomaticsectiontitle value `\temp', + must be on|off}% + \fi\fi +} + + % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -7317,7 +7536,7 @@ end \setbox0=\hbox{\printedrefname\unskip}% \ifdim \wd0 = 0pt % No printed node name was explicitly given. - \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax % Use the node name inside the square brackets. \def\printedrefname{\ignorespaces #1}% \else @@ -7787,7 +8006,7 @@ end it from ftp://tug.org/tex/epsf.tex.} % \def\image#1{% - \ifx\epsfbox\undefined + \ifx\epsfbox\thisiundefined \ifwarnednoepsf \else \errhelp = \noepsfhelp \errmessage{epsf.tex not found, images will be ignored}% @@ -8252,7 +8471,7 @@ directory should work if nowhere else does.} % % Latin1 (ISO-8859-1) character definitions. \def\latonechardefs{% - \gdef^^a0{~} + \gdef^^a0{\tie} \gdef^^a1{\exclamdown} \gdef^^a2{\missingcharmsg{CENT SIGN}} \gdef^^a3{{\pounds}} @@ -8282,7 +8501,7 @@ directory should work if nowhere else does.} \gdef^^b9{$^1$} \gdef^^ba{\ordm} % - \gdef^^bb{\guilletright} + \gdef^^bb{\guillemetright} \gdef^^bc{$1\over4$} \gdef^^bd{$1\over2$} \gdef^^be{$3\over4$} @@ -8374,7 +8593,7 @@ directory should work if nowhere else does.} % Latin2 (ISO-8859-2) character definitions. \def\lattwochardefs{% - \gdef^^a0{~} + \gdef^^a0{\tie} \gdef^^a1{\ogonek{A}} \gdef^^a2{\u{}} \gdef^^a3{\L} @@ -8547,7 +8766,7 @@ directory should work if nowhere else does.} \gdef\DeclareUnicodeCharacter#1#2{% \countUTFz = "#1\relax - \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% \begingroup \parseXMLCharref \def\UTFviiiTwoOctets##1##2{% @@ -9223,28 +9442,21 @@ directory should work if nowhere else does.} \message{and turning on texinfo input format.} +\def^^L{\par} % remove \outer, so ^L can appear in an @comment + % DEL is a comment character, in case @c does not suffice. \catcode`\^^? = 14 % Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\catcode`\$=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} -\def\normaldollar{$}%$ font-lock fix +\catcode`\"=\other \def\normaldoublequote{"} +\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix +\catcode`\+=\other \def\normalplus{+} +\catcode`\<=\other \def\normalless{<} +\catcode`\>=\other \def\normalgreater{>} +\catcode`\^=\other \def\normalcaret{^} +\catcode`\_=\other \def\normalunderscore{_} +\catcode`\|=\other \def\normalverticalbar{|} +\catcode`\~=\other \def\normaltilde{~} % This macro is used to make a character print one way in \tt % (where it can probably be output as-is), and another way in other fonts, @@ -9337,16 +9549,16 @@ directory should work if nowhere else does.} % the literal character `\'. % @def@normalturnoffactive{% - @let\=@normalbackslash @let"=@normaldoublequote - @let~=@normaltilde + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash @let^=@normalcaret @let_=@normalunderscore @let|=@normalverticalbar - @let<=@normalless - @let>=@normalgreater - @let+=@normalplus - @let$=@normaldollar %$ font-lock fix + @let~=@normaltilde @markupsetuplqdefault @markupsetuprqdefault @unsepspaces @@ -9378,10 +9590,16 @@ directory should work if nowhere else does.} % Say @foo, not \foo, in error messages. @escapechar = `@@ +% These (along with & and #) are made active for url-breaking, so need +% active definitions as the normal characters. +@def@normaldot{.} +@def@normalquest{?} +@def@normalslash{/} + % These look ok in all fonts, so just make them not special. -@catcode`@& = @other -@catcode`@# = @other -@catcode`@% = @other +@catcode`@& = @other @def@normalamp{&} +@catcode`@# = @other @def@normalhash{#} +@catcode`@% = @other @def@normalpercent{%} @c Finally, make ` and ' active, so that txicodequoteundirected and @c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we