From: Dmitry Baryshkov Date: Wed, 25 Mar 2026 01:45:12 +0000 (+0200) Subject: ARM: dts: qcom: drop apq8084 support X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=15ca411bd93675e5283f43a2a73b13f5e57406e3;p=thirdparty%2Fkernel%2Flinux.git ARM: dts: qcom: drop apq8084 support APQ8084 is one of the platforms which gained very little interest upstream. It doesn't look like the there was any interest in these devices since December 2019. Two devices supported upstream have very minumal DT files. Start forgetting about the platform by removing DT files. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260325-drop-8084-dt-v1-1-a0255a404355@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index c7873dcef154..32a44b02d2fa 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -14,8 +14,6 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8064-lg-nexus4-mako.dtb \ qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ qcom-ipq4018-ap120c-ac.dtb \ qcom-ipq4018-ap120c-ac-bit.dtb \ qcom-ipq4018-jalapeno.dtb \ diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts deleted file mode 100644 index 1df24c922be9..000000000000 --- a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8084.dtsi" -#include "pma8084.dtsi" - -/ { - model = "Qualcomm APQ8084/IFC6540"; - compatible = "qcom,apq8084-sbc", "qcom,apq8084"; - - aliases { - serial0 = &blsp2_uart2; - usid0 = &pma8084_0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - serial@f995e000 { - status = "okay"; - }; - }; -}; - -&sdhc_1 { - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&sdhc_2 { - cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; - bus-width = <4>; -}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts deleted file mode 100644 index d4e6aee034af..000000000000 --- a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8084.dtsi" -#include "pma8084.dtsi" - -/ { - model = "Qualcomm APQ 8084-MTP"; - compatible = "qcom,apq8084-mtp", "qcom,apq8084"; - - aliases { - serial0 = &blsp2_uart2; - usid0 = &pma8084_0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - serial@f995e000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi deleted file mode 100644 index cee0694ef127..000000000000 --- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi +++ /dev/null @@ -1,852 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "Qualcomm APQ 8084"; - compatible = "qcom,apq8084"; - interrupt-parent = <&intc>; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - smem_mem: smem-region@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "qcom,krait"; - reg = <0>; - enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&l2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - cpu-idle-states = <&cpu_spc>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "qcom,krait"; - reg = <1>; - enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&l2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - cpu-idle-states = <&cpu_spc>; - }; - - cpu@2 { - device_type = "cpu"; - compatible = "qcom,krait"; - reg = <2>; - enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&l2>; - qcom,acc = <&acc2>; - qcom,saw = <&saw2>; - cpu-idle-states = <&cpu_spc>; - }; - - cpu@3 { - device_type = "cpu"; - compatible = "qcom,krait"; - reg = <3>; - enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&l2>; - qcom,acc = <&acc3>; - qcom,saw = <&saw3>; - cpu-idle-states = <&cpu_spc>; - }; - - l2: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - qcom,saw = <&saw_l2>; - }; - - idle-states { - cpu_spc: cpu-spc { - compatible = "qcom,idle-state-spc", - "arm,idle-state"; - entry-latency-us = <150>; - exit-latency-us = <200>; - min-residency-us = <2000>; - }; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - - firmware { - scm { - compatible = "qcom,scm-apq8084", "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; - }; - }; - - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; - - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = ; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = , - , - , - ; - clock-frequency = <19200000>; - }; - - smem { - compatible = "qcom,smem"; - - qcom,rpm-msg-ram = <&rpm_msg_ram>; - memory-region = <&smem_mem>; - - hwlocks = <&tcsr_mutex 3>; - }; - - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "simple-bus"; - - intc: interrupt-controller@f9000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; - }; - - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - - sram@fc190000 { - compatible = "qcom,apq8084-rpm-stats"; - reg = <0xfc190000 0x10000>; - }; - - qfprom: efuse@fc4bc000 { - compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - tsens_base1: base1@d0 { - reg = <0xd0 0x1>; - bits = <0 8>; - }; - - tsens_s0_p1: s0-p1@d1 { - reg = <0xd1 0x1>; - bits = <0 6>; - }; - - tsens_s1_p1: s1-p1@d2 { - reg = <0xd1 0x2>; - bits = <6 6>; - }; - - tsens_s2_p1: s2-p1@d2 { - reg = <0xd2 0x2>; - bits = <4 6>; - }; - - tsens_s3_p1: s3-p1@d3 { - reg = <0xd3 0x1>; - bits = <2 6>; - }; - - tsens_s4_p1: s4-p1@d4 { - reg = <0xd4 0x1>; - bits = <0 6>; - }; - - tsens_s5_p1: s5-p1@d4 { - reg = <0xd4 0x2>; - bits = <6 6>; - }; - - tsens_s6_p1: s6-p1@d5 { - reg = <0xd5 0x2>; - bits = <4 6>; - }; - - tsens_s7_p1: s7-p1@d6 { - reg = <0xd6 0x1>; - bits = <2 6>; - }; - - tsens_s8_p1: s8-p1@d7 { - reg = <0xd7 0x1>; - bits = <0 6>; - }; - - tsens_mode: mode@d7 { - reg = <0xd7 0x1>; - bits = <6 2>; - }; - - tsens_s9_p1: s9-p1@d8 { - reg = <0xd8 0x1>; - bits = <0 6>; - }; - - tsens_s10_p1: s10-p1@d8 { - reg = <0xd8 0x2>; - bits = <6 6>; - }; - - tsens_base2: base2@d9 { - reg = <0xd9 0x2>; - bits = <4 8>; - }; - - tsens_s0_p2: s0-p2@da { - reg = <0xda 0x2>; - bits = <4 6>; - }; - - tsens_s1_p2: s1-p2@db { - reg = <0xdb 0x1>; - bits = <2 6>; - }; - - tsens_s2_p2: s2-p2@dc { - reg = <0xdc 0x1>; - bits = <0 6>; - }; - - tsens_s3_p2: s3-p2@dc { - reg = <0xdc 0x2>; - bits = <6 6>; - }; - - tsens_s4_p2: s4-p2@dd { - reg = <0xdd 0x2>; - bits = <4 6>; - }; - - tsens_s5_p2: s5-p2@de { - reg = <0xde 0x2>; - bits = <2 6>; - }; - - tsens_s6_p2: s6-p2@df { - reg = <0xdf 0x1>; - bits = <0 6>; - }; - - tsens_s7_p2: s7-p2@e0 { - reg = <0xe0 0x1>; - bits = <0 6>; - }; - - tsens_s8_p2: s8-p2@e0 { - reg = <0xe0 0x2>; - bits = <6 6>; - }; - - tsens_s9_p2: s9-p2@e1 { - reg = <0xe1 0x2>; - bits = <4 6>; - }; - - tsens_s10_p2: s10-p2@e2 { - reg = <0xe2 0x2>; - bits = <2 6>; - }; - - tsens_s5_p2_backup: s5-p2-backup@e3 { - reg = <0xe3 0x2>; - bits = <0 6>; - }; - - tsens_mode_backup: mode-backup@e3 { - reg = <0xe3 0x1>; - bits = <6 2>; - }; - - tsens_s6_p2_backup: s6-p2-backup@e4 { - reg = <0xe4 0x1>; - bits = <0 6>; - }; - - tsens_s7_p2_backup: s7-p2-backup@e4 { - reg = <0xe4 0x2>; - bits = <6 6>; - }; - - tsens_s8_p2_backup: s8-p2-backup@e5 { - reg = <0xe5 0x2>; - bits = <4 6>; - }; - - tsens_s9_p2_backup: s9-p2-backup@e6 { - reg = <0xe6 0x2>; - bits = <2 6>; - }; - - tsens_s10_p2_backup: s10-p2-backup@e7 { - reg = <0xe7 0x1>; - bits = <0 6>; - }; - - tsens_base1_backup: base1-backup@440 { - reg = <0x440 0x1>; - bits = <0 8>; - }; - - tsens_s0_p1_backup: s0-p1-backup@441 { - reg = <0x441 0x1>; - bits = <0 6>; - }; - - tsens_s1_p1_backup: s1-p1-backup@442 { - reg = <0x441 0x2>; - bits = <6 6>; - }; - - tsens_s2_p1_backup: s2-p1-backup@442 { - reg = <0x442 0x2>; - bits = <4 6>; - }; - - tsens_s3_p1_backup: s3-p1-backup@443 { - reg = <0x443 0x1>; - bits = <2 6>; - }; - - tsens_s4_p1_backup: s4-p1-backup@444 { - reg = <0x444 0x1>; - bits = <0 6>; - }; - - tsens_s5_p1_backup: s5-p1-backup@444 { - reg = <0x444 0x2>; - bits = <6 6>; - }; - - tsens_s6_p1_backup: s6-p1-backup@445 { - reg = <0x445 0x2>; - bits = <4 6>; - }; - - tsens_s7_p1_backup: s7-p1-backup@446 { - reg = <0x446 0x1>; - bits = <2 6>; - }; - - tsens_use_backup: use-backup@447 { - reg = <0x447 0x1>; - bits = <5 3>; - }; - - tsens_s8_p1_backup: s8-p1-backup@448 { - reg = <0x448 0x1>; - bits = <0 6>; - }; - - tsens_s9_p1_backup: s9-p1-backup@448 { - reg = <0x448 0x2>; - bits = <6 6>; - }; - - tsens_s10_p1_backup: s10-p1-backup@449 { - reg = <0x449 0x2>; - bits = <4 6>; - }; - - tsens_base2_backup: base2-backup@44a { - reg = <0x44a 0x2>; - bits = <2 8>; - }; - - tsens_s0_p2_backup: s0-p2-backup@44b { - reg = <0x44b 0x3>; - bits = <2 6>; - }; - - tsens_s1_p2_backup: s1-p2-backup@44c { - reg = <0x44c 0x1>; - bits = <0 6>; - }; - - tsens_s2_p2_backup: s2-p2-backup@44c { - reg = <0x44c 0x2>; - bits = <6 6>; - }; - - tsens_s3_p2_backup: s3-p2-backup@44d { - reg = <0x44d 0x2>; - bits = <4 6>; - }; - - tsens_s4_p2_backup: s4-p2-backup@44e { - reg = <0x44e 0x1>; - bits = <2 6>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_mode>, - <&tsens_base1>, <&tsens_base2>, - <&tsens_use_backup>, - <&tsens_mode_backup>, - <&tsens_base1_backup>, <&tsens_base2_backup>, - <&tsens_s0_p1>, <&tsens_s0_p2>, - <&tsens_s1_p1>, <&tsens_s1_p2>, - <&tsens_s2_p1>, <&tsens_s2_p2>, - <&tsens_s3_p1>, <&tsens_s3_p2>, - <&tsens_s4_p1>, <&tsens_s4_p2>, - <&tsens_s5_p1>, <&tsens_s5_p2>, - <&tsens_s6_p1>, <&tsens_s6_p2>, - <&tsens_s7_p1>, <&tsens_s7_p2>, - <&tsens_s8_p1>, <&tsens_s8_p2>, - <&tsens_s9_p1>, <&tsens_s9_p2>, - <&tsens_s10_p1>, <&tsens_s10_p2>, - <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, - <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, - <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, - <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, - <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, - <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, - <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, - <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, - <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, - <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, - <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; - nvmem-cell-names = "mode", - "base1", "base2", - "use_backup", - "mode_backup", - "base1_backup", "base2_backup", - "s0_p1", "s0_p2", - "s1_p1", "s1_p2", - "s2_p1", "s2_p2", - "s3_p1", "s3_p2", - "s4_p1", "s4_p2", - "s5_p1", "s5_p2", - "s6_p1", "s6_p2", - "s7_p1", "s7_p2", - "s8_p1", "s8_p2", - "s9_p1", "s9_p2", - "s10_p1", "s10_p2", - "s0_p1_backup", "s0_p2_backup", - "s1_p1_backup", "s1_p2_backup", - "s2_p1_backup", "s2_p2_backup", - "s3_p1_backup", "s3_p2_backup", - "s4_p1_backup", "s4_p2_backup", - "s5_p1_backup", "s5_p2_backup", - "s6_p1_backup", "s6_p2_backup", - "s7_p1_backup", "s7_p2_backup", - "s8_p1_backup", "s8_p2_backup", - "s9_p1_backup", "s9_p2_backup", - "s10_p1_backup", "s10_p2_backup"; - #qcom,sensors = <11>; - interrupts = ; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0xf9020000 0x1000>; - clock-frequency = <19200000>; - - frame@f9021000 { - frame-number = <0>; - interrupts = , - ; - reg = <0xf9021000 0x1000>, - <0xf9022000 0x1000>; - }; - - frame@f9023000 { - frame-number = <1>; - interrupts = ; - reg = <0xf9023000 0x1000>; - status = "disabled"; - }; - - frame@f9024000 { - frame-number = <2>; - interrupts = ; - reg = <0xf9024000 0x1000>; - status = "disabled"; - }; - - frame@f9025000 { - frame-number = <3>; - interrupts = ; - reg = <0xf9025000 0x1000>; - status = "disabled"; - }; - - frame@f9026000 { - frame-number = <4>; - interrupts = ; - reg = <0xf9026000 0x1000>; - status = "disabled"; - }; - - frame@f9027000 { - frame-number = <5>; - interrupts = ; - reg = <0xf9027000 0x1000>; - status = "disabled"; - }; - - frame@f9028000 { - frame-number = <6>; - interrupts = ; - reg = <0xf9028000 0x1000>; - status = "disabled"; - }; - }; - - saw0: power-manager@f9089000 { - compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; - }; - - saw1: power-manager@f9099000 { - compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; - }; - - saw2: power-manager@f90a9000 { - compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw3: power-manager@f90b9000 { - compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw_l2: power-manager@f9012000 { - compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2"; - reg = <0xf9012000 0x1000>; - }; - - acc0: power-manager@f9088000 { - compatible = "qcom,kpss-acc-v2"; - reg = <0xf9088000 0x1000>, - <0xf9008000 0x1000>; - }; - - acc1: power-manager@f9098000 { - compatible = "qcom,kpss-acc-v2"; - reg = <0xf9098000 0x1000>, - <0xf9008000 0x1000>; - }; - - acc2: power-manager@f90a8000 { - compatible = "qcom,kpss-acc-v2"; - reg = <0xf90a8000 0x1000>, - <0xf9008000 0x1000>; - }; - - acc3: power-manager@f90b8000 { - compatible = "qcom,kpss-acc-v2"; - reg = <0xf90b8000 0x1000>, - <0xf9008000 0x1000>; - }; - - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-apq8084"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; - clocks = <&xo_board>, - <&sleep_clk>, - <0>, /* ufs */ - <0>, - <0>, - <0>, - <0>, /* sata */ - <0>, - <0>; /* pcie */ - clock-names = "xo", - "sleep_clk", - "ufs_rx_symbol_0_clk_src", - "ufs_rx_symbol_1_clk_src", - "ufs_tx_symbol_0_clk_src", - "ufs_tx_symbol_1_clk_src", - "sata_asic0_clk", - "sata_rx_clk", - "pcie_pipe"; - }; - - tcsr_mutex: hwlock@fd484000 { - compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex"; - reg = <0xfd484000 0x1000>; - #hwlock-cells = <1>; - }; - - rpm_msg_ram: sram@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - tlmm: pinctrl@fd510000 { - compatible = "qcom,apq8084-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 147>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - }; - - blsp2_uart2: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - sdhc_1: mmc@f9824900 { - compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc", "core"; - interrupts = , ; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; - clock-names = "iface", "core", "xo"; - status = "disabled"; - }; - - sdhc_2: mmc@f98a4900 { - compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc", "core"; - interrupts = , ; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; - clock-names = "iface", "core", "xo"; - status = "disabled"; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - }; - - rpm: remoteproc { - compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc"; - - smd-edge { - interrupts = ; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm-requests { - compatible = "qcom,rpm-apq8084", "qcom,smd-rpm"; - qcom,smd-channels = "rpm_requests"; - - regulators-0 { - compatible = "qcom,rpm-pma8084-regulators"; - - pma8084_s1: s1 {}; - pma8084_s2: s2 {}; - pma8084_s3: s3 {}; - pma8084_s4: s4 {}; - pma8084_s5: s5 {}; - pma8084_s6: s6 {}; - pma8084_s7: s7 {}; - pma8084_s8: s8 {}; - pma8084_s9: s9 {}; - pma8084_s10: s10 {}; - pma8084_s11: s11 {}; - pma8084_s12: s12 {}; - - pma8084_l1: l1 {}; - pma8084_l2: l2 {}; - pma8084_l3: l3 {}; - pma8084_l4: l4 {}; - pma8084_l5: l5 {}; - pma8084_l6: l6 {}; - pma8084_l7: l7 {}; - pma8084_l8: l8 {}; - pma8084_l9: l9 {}; - pma8084_l10: l10 {}; - pma8084_l11: l11 {}; - pma8084_l12: l12 {}; - pma8084_l13: l13 {}; - pma8084_l14: l14 {}; - pma8084_l15: l15 {}; - pma8084_l16: l16 {}; - pma8084_l17: l17 {}; - pma8084_l18: l18 {}; - pma8084_l19: l19 {}; - pma8084_l20: l20 {}; - pma8084_l21: l21 {}; - pma8084_l22: l22 {}; - pma8084_l23: l23 {}; - pma8084_l24: l24 {}; - pma8084_l25: l25 {}; - pma8084_l26: l26 {}; - pma8084_l27: l27 {}; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; - }; - }; -};