From: Fabrice Carrega Date: Mon, 1 Feb 2016 21:43:47 +0000 (+0100) Subject: Edited Troubleshooting.md #214 X-Git-Tag: 2.9.1~13^2~1 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1892be5aebc5dfdd2f251d01e1c41c11118b3c1f;p=thirdparty%2Fshairport-sync.git Edited Troubleshooting.md #214 --- diff --git a/TROUBLESHOOTING.md b/TROUBLESHOOTING.md index be5d2326..aabf6579 100644 --- a/TROUBLESHOOTING.md +++ b/TROUBLESHOOTING.md @@ -3,3 +3,39 @@ Troubleshooting The installation and setup of Shairport Sync is straightforward on recent Linux distributions. Issues can occasionally arise caused by problems elsewhere in the system, typically WiFi reception and/or the WiFi adapter settings, the network, the router, firewall settings. In this brief document will be listed some problems and some solutions. + +### UFW firewall blocking connections on Raspbian (Raspberry Pi) + +**Problem** + +You have installed Shairport-sync successfully, the deamon is running, you can see it from your remote terminal but you are unable to play a song. + +**Before you change anything to your configuration** + +- Type the following command: + + `sudo ufw disable` + +- Try to launch a song from your remote device on the Shairport-sync one, if this works, proceed to the next step and follow the ones described below, in the solution section. + +- Enable UFW through the following command: + + `sudo ufw enable` + +**Solution** + +You have to allow connections to your Pi from remote devices. To do so, after re-enabling UFW (see last stp of the previous section), enter the following commands in shell: + +``` +sudo ufw allow from 192.168.1.1/16 to any port 3689 proto tcp +sudo ufw allow from 192.168.1.1/16 to any port 5353 +sudo ufw allow from 192.168.1.1/16 to any port 5000:5005 proto tcp +sudo ufw allow from 192.168.1.1/16 to any port 6000:6005 proto udp +sudo ufw allow from 192.168.1.1/16 to any port 35000:65535 proto udp +``` + +You may have to change the IP adresses range depending on your own local network settings. + +You can check UFW config by typing `sudo ufw status` in shell. Please make sure that UFW is active, especially if you have deactivated it previously for testing purpose. + +Run your song from your remote device. Enjoy !