From: Catalin Popescu Date: Wed, 2 Jul 2025 11:41:04 +0000 (+0200) Subject: dt-bindings: net: bluetooth: nxp: add support for supply and reset X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=18afbdcd1250cafee0012dc45832d439f96b85e6;p=thirdparty%2Flinux.git dt-bindings: net: bluetooth: nxp: add support for supply and reset Add support for chip power supply and chip reset/powerdown. Signed-off-by: Catalin Popescu Acked-by: Conor Dooley Signed-off-by: Luiz Augusto von Dentz --- diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index bb9ab5dd3b4af..857c6234ba9be 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -72,6 +72,14 @@ properties: description: The GPIO number of the NXP chipset used for BT_WAKE_OUT. + vcc-supply: + description: + phandle of the regulator that provides the supply voltage. + + reset-gpios: + description: + Chip powerdown/reset signal (PDn). + required: - compatible @@ -90,6 +98,8 @@ examples: device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; nxp,wakein-pin = /bits/ 8 <18>; nxp,wakeout-pin = /bits/ 8 <19>; + vcc-supply = <&nxp_iw612_supply>; + reset-gpios = <&gpioctrl 2 GPIO_ACTIVE_LOW>; local-bd-address = [66 55 44 33 22 11]; interrupt-parent = <&gpio>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>;