From: Andy Shevchenko Date: Wed, 14 Oct 2020 10:46:38 +0000 (+0300) Subject: pinctrl: intel: Set default bias in case no particular value given X-Git-Tag: v5.9.9~127 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=191c52cf4437062d8b261cd0b4533ddfdcdff2f4;p=thirdparty%2Fkernel%2Fstable.git pinctrl: intel: Set default bias in case no particular value given [ Upstream commit f3c75e7a9349d1d33eb53ddc1b31640994969f73 ] When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel pin control hardware the 5 kOhm sounds plausible because on one hand it's a minimum of resistors present in all hardware generations and at the same time it's high enough to minimize leakage current (will be only 200 uA with the above choice). Fixes: e57725eabf87 ("pinctrl: intel: Add support for hardware debouncer") Reported-by: Jamie McClymont Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Sasha Levin --- diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index b738b28239bd4..31e7840bc5e25 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -683,6 +683,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin, value |= PADCFG1_TERM_UP; + /* Set default strength value in case none is given */ + if (arg == 1) + arg = 5000; + switch (arg) { case 20000: value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT; @@ -705,6 +709,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin, case PIN_CONFIG_BIAS_PULL_DOWN: value &= ~(PADCFG1_TERM_UP | PADCFG1_TERM_MASK); + /* Set default strength value in case none is given */ + if (arg == 1) + arg = 5000; + switch (arg) { case 20000: value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;