From: Donghyun Ko Date: Sat, 3 May 2025 00:24:10 +0000 (+0900) Subject: mediatek: add support for ipTIME AX3000SM X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1c6cb6d5be10281d3b45ef8deec50b9e1e9aa8bb;p=thirdparty%2Fopenwrt.git mediatek: add support for ipTIME AX3000SM Specification ------------- - SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3GHz - RAM : DDR3 256Mbytes, Nanya Technology NT5CC128M16IP - Flash : 128Mbytes NAND Flash, ESMT F50L1G41LB - WLAN : MediaTek MT7976CN dual-band Wi-Fi 6 - 2.4GHz : b/g/n/ax, MU-MIMO - 5GHz : a/n/ac/ax, MU-MIMO - Ethernet : 10/100/1000 Mbps x4, LAN (MediaTek MT7531AE) 10/100/1000 Mbps x1, WAN (MT7981 internal PHY) - UART : 1x4 pin header on PCB - [J500] 3.3V, TX, RX, GND (115200, 8N1) - Buttons : WPS, Reset - LEDs : 1x Power (Amber) 1x CPU (Amber) 1x Wi-Fi 5GHz (Amber) 1x Wi-Fi 2.4GHz (Amber) 1x WAN activity (Amber) 4x LAN activity (Amber) - Power : 12VDC, 1A (Center positive polarity) MAC address ----------- +-----------+-------------------+-----------+ | Interface | MAC | Algorithm | +-----------+-------------------+-----------+ | WLAN 2.4G | B0:38:6C:xx:xx:xx | label | | WLAN 5G | B2:38:6C:4x:xx:xx | | | WAN | B0:38:6C:xx:xx:xx | label + 1 | | LAN | B0:38:6C:xx:xx:xx | label + 3 | +-----------+-------------------+-----------+ The WLAN 2.4G MAC address was found in 'Factory' partition, 0x4 Installation ------------ 1. Download the *initramfs-kernel.bin file from the OpenWrt website 2. Attach UART to the router, and interrupt the boot process by pressing '0' If you successfully interrupt the boot process, a terminal prompt name should look like this: MT7981> 3. Connect the router(LAN port) to the PC 4. Assign the PC IP address: 192.168.0.100/24 5. Load and run the *initramfs-kernel.bin: tftpboot 0x46000000 initramfs-kernel.bin bootm 6. Upload the OpenWrt *squashfs-sysupgrade.bin to the router 7. Run 'sysupgrade -n' with the sysupgrade OpenWrt image Signed-off-by: Donghyun Ko Link: https://github.com/openwrt/openwrt/pull/18689 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mediatek/dts/mt7981b-iptime-ax3000sm.dts b/target/linux/mediatek/dts/mt7981b-iptime-ax3000sm.dts new file mode 100644 index 00000000000..1b1ba3dedab --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-iptime-ax3000sm.dts @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7981b.dtsi" + +/ { + model = "ipTIME AX3000SM"; + compatible = "iptime,ax3000sm", "mediatek,mt7981"; + + aliases { + serial0 = &uart0; + label-mac-device = &gmac1; + led-boot = &led_cpu; + led-failsafe = &led_cpu; + led-running = &led_cpu; + led-upgrade = &led_cpu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "wps"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + button-1 { + label = "reset"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led_cpu: led-3 { + color = ; + function = LED_FUNCTION_CPU; + gpios = <&pio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 (3)>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 (1)>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x6E00000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; + + band@0 { + reg = <0>; + nvmem-cells = <&macaddr_factory_4 (0)>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + reg = <1>; + nvmem-cells = <&macaddr_factory_4 (0)>; + nvmem-cell-names = "mac-address"; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 53df9106f2d..852c17b9027 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -78,6 +78,9 @@ glinet,gl-xe3000) huasifei,wh3000) ucidef_set_led_netdev "wan" "WAN" "red:wan" "eth1" "link tx rx" ;; +iptime,ax3000sm) + ucidef_set_led_netdev "wan" "wan" "amber:wan" "eth1" "link tx rx" + ;; mercusys,mr80x-v3) ucidef_set_led_netdev "lan1" "lan-1" "green:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan2" "lan-2" "green:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 453594c5e05..f9b7440664c 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -49,6 +49,7 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan ;; asus,tuf-ax4200|\ + iptime,ax3000sm|\ jdcloud,re-cp-03|\ mediatek,mt7981-rfb|\ netcore,n60|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 04ec47ee140..56ae87a0ed6 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -109,6 +109,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + iptime,ax3000sm) + addr=$(mtd_get_mac_binary "Factory" 0x4) + [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_unsetbit $(macaddr_unsetbit $(macaddr_unsetbit $(macaddr_setbit $addr 26) 25) 27) 28) > \ + /sys${DEVPATH}/macaddress + ;; jcg,q30-pro|\ netcore,n60|\ netcore,n60-pro) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index c4fce71ae8d..d3e94592793 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1101,6 +1101,17 @@ define Device/huasifei_wh3000-pro endef TARGET_DEVICES += huasifei_wh3000-pro +define Device/iptime_ax3000sm + DEVICE_VENDOR := ipTIME + DEVICE_MODEL := AX3000SM + DEVICE_DTS := mt7981b-iptime-ax3000sm + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb +endef +TARGET_DEVICES += iptime_ax3000sm + define Device/jcg_q30-pro DEVICE_VENDOR := JCG DEVICE_MODEL := Q30 PRO