From: David Lechner Date: Wed, 9 Jul 2025 01:38:33 +0000 (-0500) Subject: iio: adc: ad7173: fix calibration channel X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1d9a21ffb43b6fd326ead98f0d0afd6d104b739a;p=thirdparty%2Fkernel%2Fstable.git iio: adc: ad7173: fix calibration channel Fix the channel index values passed to ad_sd_calibrate() in ad7173_calibrate_all(). ad7173_calibrate_all() expects these values to be that of the CHANNELx register assigned to the channel, not the datasheet INPUTx number of the channel. The incorrect values were causing register writes to fail for some channels because they set the WEN bit that must always be 0 for register access and set the R/W bit to read instead of write. For other channels, the channel number was just wrong because the CHANNELx registers are generally assigned in reverse order and so almost never match the INPUTx numbers. Fixes: 031bdc8aee01 ("iio: adc: ad7173: add calibration support") Signed-off-by: David Lechner Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20250708-iio-adc-ad7313-fix-calibration-channel-v1-1-e6174e2c7cbf@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 1f9e91a2e3f9..2173455c0169 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -391,13 +391,12 @@ static int ad7173_calibrate_all(struct ad7173_state *st, struct iio_dev *indio_d if (indio_dev->channels[i].type != IIO_VOLTAGE) continue; - ret = ad_sd_calibrate(&st->sd, AD7173_MODE_CAL_INT_ZERO, st->channels[i].ain); + ret = ad_sd_calibrate(&st->sd, AD7173_MODE_CAL_INT_ZERO, i); if (ret < 0) return ret; if (st->info->has_internal_fs_calibration) { - ret = ad_sd_calibrate(&st->sd, AD7173_MODE_CAL_INT_FULL, - st->channels[i].ain); + ret = ad_sd_calibrate(&st->sd, AD7173_MODE_CAL_INT_FULL, i); if (ret < 0) return ret; }