From: Andrea Scian Date: Wed, 4 Feb 2026 17:41:45 +0000 (+0100) Subject: mtd: rawnand: pl353: Add message about ECC mode X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1e06dbfdfb851170b243d6498e442b449324c664;p=thirdparty%2Flinux.git mtd: rawnand: pl353: Add message about ECC mode This just add some information on kernel log about the selected ECC Signed-off-by: Andrea Scian Signed-off-by: Miquel Raynal --- diff --git a/drivers/mtd/nand/raw/pl35x-nand-controller.c b/drivers/mtd/nand/raw/pl35x-nand-controller.c index 7f012b7c3eaec..947fd86ac5fa2 100644 --- a/drivers/mtd/nand/raw/pl35x-nand-controller.c +++ b/drivers/mtd/nand/raw/pl35x-nand-controller.c @@ -970,15 +970,18 @@ static int pl35x_nand_attach_chip(struct nand_chip *chip) switch (chip->ecc.engine_type) { case NAND_ECC_ENGINE_TYPE_ON_DIE: + dev_dbg(nfc->dev, "Using on-die ECC\n"); /* Keep these legacy BBT descriptors for ON_DIE situations */ chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; fallthrough; case NAND_ECC_ENGINE_TYPE_NONE: case NAND_ECC_ENGINE_TYPE_SOFT: + dev_dbg(nfc->dev, "Using software ECC (Hamming 1-bit/512B)\n"); chip->ecc.write_page_raw = nand_monolithic_write_page_raw; break; case NAND_ECC_ENGINE_TYPE_ON_HOST: + dev_dbg(nfc->dev, "Using hardware ECC\n"); ret = pl35x_nand_init_hw_ecc_controller(nfc, chip); if (ret) return ret;