From: Conor Dooley <conor.dooley@microchip.com>
Date: Mon, 10 Nov 2025 11:23:52 +0000 (+0000)
Subject: riscv: dts: microchip: convert clock and reset to use syscon
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=26535e84449abbf5d207a4b1db12891edf52e35e;p=thirdparty%2Fkernel%2Flinux.git

riscv: dts: microchip: convert clock and reset to use syscon

The "subblock" clocks and reset registers on PolarFire SoC are located
in the mss-top-sysreg region, alongside pinctrl and interrupt control
functionality. Re-write the devicetree to describe the sys explicitly,
as its own node, rather than as a region of the clock node.
Correspondingly, the phandles to the reset controller must be updated to
the new provider. The drivers will continue to support the old way of
doing things.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index f9d6bf08e7170..5c2963e269b83 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -251,11 +251,9 @@
 			#dma-cells = <1>;
 		};
 
-		clkcfg: clkcfg@20002000 {
-			compatible = "microchip,mpfs-clkcfg";
-			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
-			clocks = <&refclk>;
-			#clock-cells = <1>;
+		mss_top_sysreg: syscon@20002000 {
+			compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd";
+			reg = <0x0 0x20002000 0x0 0x1000>;
 			#reset-cells = <1>;
 		};
 
@@ -452,7 +450,7 @@
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC0>;
+			resets = <&mss_top_sysreg CLK_MAC0>;
 			status = "disabled";
 		};
 
@@ -466,7 +464,7 @@
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC1>;
+			resets = <&mss_top_sysreg CLK_MAC1>;
 			status = "disabled";
 		};
 
@@ -550,5 +548,12 @@
 			clocks = <&scbclk>;
 			status = "disabled";
 		};
+
+		clkcfg: clkcfg@3e001000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x3e001000 0x0 0x1000>;
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+		};
 	};
 };