From: Binbin Zhou Date: Mon, 14 Jul 2025 06:45:42 +0000 (+0800) Subject: gpio: loongson-64bit: Extend GPIO irq support X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=27cb8f702eb789f97f7a8bd5a91d76c65a937b2f;p=thirdparty%2Flinux.git gpio: loongson-64bit: Extend GPIO irq support Add the interrupt enable register offset (inten_offset) so that GPIO interrupts can be enabled normally on more models. According to the latest interface specifications, the definition of GPIO interrupts in ACPI is similar to that in FDT. The GPIO interrupts are listed one by one according to the GPIO number, and the corresponding interrupt number can be obtained directly through the GPIO number specified by the consumer. Signed-off-by: Xi Ruoyao Signed-off-by: Binbin Zhou Reviewed-by: Huacai Chen Link: https://lore.kernel.org/r/20250714064542.2276247-1-zhoubinbin@loongson.cn [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski --- diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c index 26227669f0269..d5b2ad848519c 100644 --- a/drivers/gpio/gpio-loongson-64bit.c +++ b/drivers/gpio/gpio-loongson-64bit.c @@ -222,6 +222,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = { .conf_offset = 0x0, .in_offset = 0xc, .out_offset = 0x8, + .inten_offset = 0x14, }; static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = { @@ -230,6 +231,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = { .conf_offset = 0x0, .in_offset = 0x20, .out_offset = 0x10, + .inten_offset = 0x30, }; static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = { @@ -246,6 +248,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = { .conf_offset = 0x0, .in_offset = 0xc, .out_offset = 0x8, + .inten_offset = 0x14, }; static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = { @@ -254,6 +257,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = { .conf_offset = 0x800, .in_offset = 0xa00, .out_offset = 0x900, + .inten_offset = 0xb00, }; /* LS7A2000 chipset GPIO */ @@ -263,6 +267,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls7a2000_data0 = { .conf_offset = 0x800, .in_offset = 0xa00, .out_offset = 0x900, + .inten_offset = 0xb00, }; /* LS7A2000 ACPI GPIO */ @@ -281,6 +286,7 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls3a6000_data = { .conf_offset = 0x0, .in_offset = 0xc, .out_offset = 0x8, + .inten_offset = 0x14, }; static const struct of_device_id loongson_gpio_of_match[] = {