From: Primoz Fiser <primoz.fiser@norik.com>
Date: Fri, 5 Dec 2025 11:10:42 +0000 (+0100)
Subject: board: phytec: phycore-imx93: Switch to standard boot
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2d964cb7257a68793098724b05534edb83c68274;p=thirdparty%2Fu-boot.git

board: phytec: phycore-imx93: Switch to standard boot

Enable standard boot for the phyCORE-i.MX93 board and use it as a new
default. Add required standard boot variables to the environment, while
removing old boot scripts and now unnecessary environment variables.
Adjust variables according to the requirements of PHYTEC ampliphy-boot
distro-boot. Last but not least, order environment vars by alphabet and
run 'make savedefconfig' to resync defconfig.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
---

diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
index 0c8d0ba9693..646b617949d 100644
--- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
+++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
@@ -30,6 +30,22 @@
 		ethernet1 = &eqos;
 	};
 
+	bootstd {
+		bootph-verify;
+		compatible = "u-boot,boot-std";
+
+		filename-prefixes = "/", "/boot/";
+		bootdev-order = "mmc0", "mmc1", "ethernet";
+
+		rauc {
+			compatible = "u-boot,distro-rauc";
+		};
+
+		script {
+			compatible = "u-boot,script";
+		};
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
diff --git a/board/phytec/phycore_imx93/phycore_imx93.env b/board/phytec/phycore_imx93/phycore_imx93.env
index 7b0a90e6447..4a5e5bfaee3 100644
--- a/board/phytec/phycore_imx93/phycore_imx93.env
+++ b/board/phytec/phycore_imx93/phycore_imx93.env
@@ -1,70 +1,12 @@
 /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 
-#include <env/phytec/rauc.env>
-#include <env/phytec/overlays.env>
-
-bootcmd=
-	mmc dev ${mmcdev};
-	if mmc rescan; then
-		if test ${doraucboot} = 1; then
-			run raucinit;
-		fi;
-		if run loadimage; then
-			run mmcboot;
-		else
-			run netboot;
-		fi;
-	fi;
-image=Image
+boot_script_dhcp=net_boot_fit.scr.uimg
 console=ttyLP0
 fdt_addr_r=0x90000000
-fdtoverlay_addr_r=0x900c0000
-bootenv_addr_r=0x90500000
 fdtfile=CONFIG_DEFAULT_FDT_FILE
+fdtoverlay_addr_r=0x900c0000
 ip_dyn=yes
+kernel_addr_r=0x88000000
+nfsroot=/srv/nfs
 prepare_mcore=setenv optargs "${optargs} clk-imx93.mcore_booted"
-mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
-mmcpart=1
-mmcroot=2
-mmcautodetect=yes
-mmcargs=setenv bootargs console=${console},${baudrate} earlycon
-	root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw ${optargs}
-loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
-loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
-mmcboot=
-	echo Booting from mmc ...;
-	if test ${no_bootenv} = 0; then
-		if run mmc_load_bootenv; then
-			env import -t ${bootenv_addr_r} ${filesize};
-		fi;
-	fi;
-	run mmcargs;
-	if run loadfdt; then
-		run mmc_apply_overlays;
-		booti ${loadaddr} - ${fdt_addr_r};
-	else
-		echo WARN: Cannot load the DT;
-	fi;
-nfsroot=/nfs
-netargs=setenv bootargs console=${console},${baudrate} earlycon
-	root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp ${optargs}
-netboot=
-	echo Booting from net ...;
-	run netargs;
-	if test ${ip_dyn} = yes; then
-		setenv get_cmd dhcp;
-	else
-		setenv get_cmd tftp;
-	fi;
-	if test ${no_bootenv} = 0; then
-		if run net_load_bootenv; then
-			env import -t ${bootenv_addr_r} ${filesize};
-		fi;
-	fi;
-	${get_cmd} ${loadaddr} ${image};
-	if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
-		run net_apply_overlays;
-		booti ${loadaddr} - ${fdt_addr_r};
-	else
-		echo WARN: Cannot load the DT;
-	fi;
+scriptaddr=0x83500000
diff --git a/configs/imx93-phycore_defconfig b/configs/imx93-phycore_defconfig
index 4c952e966d1..ac719372b41 100644
--- a/configs/imx93-phycore_defconfig
+++ b/configs/imx93-phycore_defconfig
@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x20000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SOURCE_FILE="phycore_imx93"
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_PHYTEC_SOM_DETECTION=y
 CONFIG_PHYTEC_EEPROM_BUS=2
-CONFIG_ENV_SOURCE_FILE="phycore_imx93"
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x700000
 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
@@ -33,6 +33,9 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTSTD_FULL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="oftree"
@@ -52,6 +55,9 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_CMD_BOOTDEV is not set
+# CONFIG_CMD_BOOTMETH is not set
+# CONFIG_CMD_BOOTSTD is not set
 CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CRC32_VERIFY=y
@@ -149,5 +155,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
 CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
 CONFIG_CI_UDC=y
 CONFIG_ULP_WATCHDOG=y
+# CONFIG_RSA is not set
+# CONFIG_SPL_SHA256 is not set
 CONFIG_LZO=y
 CONFIG_BZIP2=y