From: Russell King (Oracle) Date: Wed, 2 Jul 2025 09:44:34 +0000 (+0100) Subject: net: phylink: add phylink_sfp_select_interface_speed() X-Git-Tag: v6.17-rc1~126^2~193^2 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=320164a6e172137bcefea669f0ff6ee3f4c8611e;p=thirdparty%2Flinux.git net: phylink: add phylink_sfp_select_interface_speed() Add phylink_sfp_select_interface_speed() which attempts to select the SFP interface based on the ethtool speed when autoneg is turned off. This allows users to turn off autoneg for SFPs that support multiple interface modes, and have an appropriate interface mode selected. Signed-off-by: Russell King (Oracle) Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/E1uWu14-005KXo-IO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index c92a878ab717a..f5473510b762c 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -2709,6 +2709,39 @@ static phy_interface_t phylink_sfp_select_interface(struct phylink *pl, return interface; } +static phy_interface_t phylink_sfp_select_interface_speed(struct phylink *pl, + u32 speed) +{ + phy_interface_t best_interface = PHY_INTERFACE_MODE_NA; + phy_interface_t interface; + u32 max_speed; + int i; + + for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++) { + interface = phylink_sfp_interface_preference[i]; + if (!test_bit(interface, pl->sfp_interfaces)) + continue; + + max_speed = phylink_interface_max_speed(interface); + + /* The logic here is: if speed == max_speed, then we've found + * the best interface. Otherwise we find the interface that + * can just support the requested speed. + */ + if (max_speed >= speed) + best_interface = interface; + + if (max_speed <= speed) + break; + } + + if (best_interface == PHY_INTERFACE_MODE_NA) + phylink_err(pl, "selection of interface failed, speed %u\n", + speed); + + return best_interface; +} + static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b) { __ETHTOOL_DECLARE_LINK_MODE_MASK(mask); @@ -2911,8 +2944,14 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, * link can be configured correctly. */ if (pl->sfp_bus) { - config.interface = phylink_sfp_select_interface(pl, + if (kset->base.autoneg == AUTONEG_ENABLE) + config.interface = + phylink_sfp_select_interface(pl, config.advertising); + else + config.interface = + phylink_sfp_select_interface_speed(pl, + config.speed); if (config.interface == PHY_INTERFACE_MODE_NA) return -EINVAL;