From: Dmitry Mostovoy Date: Sat, 9 May 2026 18:56:45 +0000 (-0400) Subject: mediatek: add cudy m3000-v2-yt8821 ubootmod X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=395252be087bc960ad38173220085ccecb668db6;p=thirdparty%2Fopenwrt.git mediatek: add cudy m3000-v2-yt8821 ubootmod RAM: ESMT M15T2G16128A-DEB DDR3 1866 MT/s This allows us to use the full size of nand, which extends ubi size from 64Mb to 122.25Mb. 1. Log in to the device and backup all the partitions, especially unique "Factory" and "bdinfo" partitions from System -> Backup / Flash Firmware -> Save mtdblock contents. 2. Install kmod-mtd-rw to unlock mtd partitions for writing apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1 3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP": mtd -e BL2 write openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-preloader.bin BL2 mtd -e FIP write openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-bl31-uboot.fip FIP 4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1" 5. Serve openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-initramfs-recovery.itb using TFTP server. 6. Connect Router LAN with PC LAN. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt initramfs recovery has booted, clean "/dev/mtd5" ubi partition to utilize maximum of free space: ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 9. Perform sysupgrade. Signed-off-by: Dmitry Mostovoy Link: https://github.com/openwrt/openwrt/pull/23274 Signed-off-by: Jonas Jelonek --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 72891a471ab..4b50e78234c 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -341,6 +341,18 @@ define U-Boot/mt7981_cudy_m3000-v1 DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3 endef +define U-Boot/mt7981_cudy_m3000-v2-yt8821 + NAME:=Cudy M3000 v2 with Motorcomm YT8821 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=cudy_m3000-v2-yt8821-ubootmod + UBOOT_CONFIG:=mt7981_cudy_m3000-v2-yt8821 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=cudy + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-cudy-ddr3 +endef + define U-Boot/mt7981_cudy_tr3000-v1 NAME:=Cudy TR3000 v1 BUILD_SUBTARGET:=filogic @@ -1273,6 +1285,7 @@ UBOOT_TARGETS := \ mt7981_comfast_cf-wr632ax \ mt7981_creatlentem_clt-r30b1-ubi \ mt7981_cudy_m3000-v1 \ + mt7981_cudy_m3000-v2-yt8821 \ mt7981_cudy_tr3000-v1 \ mt7981_cudy_wbr3000uax-v1 \ mt7981_cudy_wr3000e-v1 \ diff --git a/package/boot/uboot-mediatek/patches/468-add-cudy_m3000-v2-yt8821.patch b/package/boot/uboot-mediatek/patches/468-add-cudy_m3000-v2-yt8821.patch new file mode 100644 index 00000000000..4771966446e --- /dev/null +++ b/package/boot/uboot-mediatek/patches/468-add-cudy_m3000-v2-yt8821.patch @@ -0,0 +1,325 @@ +--- /dev/null ++++ b/configs/mt7981_cudy_m3000-v2-yt8821_defconfig +@@ -0,0 +1,112 @@ ++CONFIG_ARM=y ++CONFIG_ARM_SMCCC=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-m3000-v2-yt8821" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-m3000-v2-yt8821.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++# CONFIG_BOARD_INIT is not set ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_RNG=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_REDUNDANT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_RELOC_GD_ENV_ADDR=y ++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y ++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/cudy_m3000-v2-yt8821_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_RNG=y ++CONFIG_RNG_MTK_V2=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/arch/arm/dts/mt7981-cudy-m3000-v2-yt8821.dts +@@ -0,0 +1,150 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "Cudy M3000 v2 with Motorcomm YT8821"; ++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&pio 1 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led_status_white { ++ label = "white:status"; ++ gpios = <&pio 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led_wan_white { ++ label = "white:wan"; ++ gpios = <&pio 5 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <1>; ++ phy-mode = "gmii"; ++ phy-handle = <&phy0>; ++ ++ mdio { ++ phy0: ethernet-phy@0 { ++ compatible = "ethernet-phy-id03a2.9461"; ++ reg = <0x0>; ++ phy-mode = "gmii"; ++ }; ++ }; ++}; ++ ++&pio { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@180000 { ++ label = "factory"; ++ reg = <0x180000 0x200000>; ++ }; ++ ++ partition@380000 { ++ label = "bdinfo"; ++ reg = <0x380000 0x40000>; ++ }; ++ ++ partition@3c0000 { ++ label = "fip"; ++ reg = <0x3c0000 0x200000>; ++ }; ++ ++ partition@5c0000 { ++ label = "ubi"; ++ reg = <0x5c0000 0x7a40000>; ++ compatible = "linux,ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/defenvs/cudy_m3000-v2-yt8821_env +@@ -0,0 +1,54 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-cudy_m3000-v2-yt8821-ubootmod-squashfs-sysupgrade.itb ++bootled_pwr=white:status ++bootled_rec=white:wan ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" diff --git a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic index 8e181ed3ba1..b65fff07243 100644 --- a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic @@ -29,6 +29,7 @@ cmcc,a10-ubootmod|\ comfast,cf-wr632ax-ubootmod|\ creatlentem,clt-r30b1-ubi|\ cudy,m3000-v1-ubootmod|\ +cudy,m3000-v2-yt8821-ubootmod|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ diff --git a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821-ubootmod.dts new file mode 100644 index 00000000000..977cad3602c --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821-ubootmod.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7981b-cudy-m3000-v2-yt8821.dtsi" + +/ { + model = "Cudy M3000 v2 with Motorcomm YT8821 (OpenWrt U-Boot layout)"; + compatible = "cudy,m3000-v2-yt8821-ubootmod", "mediatek,mt7981"; + + chosen { + bootargs = "root=/dev/fit0 rootwait"; + rootdisk = <&ubi_rootdisk>; + }; +}; + +&ubi { + reg = <0x5c0000 0x7a40000>; + + volumes { + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + }; +}; diff --git a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dts b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dts index 0922b318e1d..79e8f2352c5 100644 --- a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dts +++ b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dts @@ -2,21 +2,15 @@ /dts-v1/; -#include "mt7981b-cudy-m3000.dtsi" +#include "mt7981b-cudy-m3000-v2-yt8821.dtsi" / { model = "Cudy M3000 v2 with Motorcomm YT8821"; compatible = "cudy,m3000-v2-yt8821", "mediatek,mt7981"; }; -&mdio_bus { - wan_phy: ethernet-phy@1 { - compatible = "ethernet-phy-id4f51.ea19"; - reg = <1>; - reset-assert-us = <100000>; - reset-deassert-us = <100000>; - reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&pio>; - }; +&spi_nand { + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; }; diff --git a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dtsi b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dtsi new file mode 100644 index 00000000000..9401c7a0593 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v2-yt8821.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981b-cudy-m3000.dtsi" + +&mdio_bus { + wan_phy: ethernet-phy@1 { + compatible = "ethernet-phy-id4f51.ea19"; + reg = <1>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&pio>; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index a14bc702528..3acac5e6753 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -151,6 +151,7 @@ mediatek_setup_interfaces() cudy,m3000-v1|\ cudy,m3000-v1-ubootmod|\ cudy,m3000-v2-yt8821|\ + cudy,m3000-v2-yt8821-ubootmod|\ cudy,tr3000-256mb-v1|\ cudy,tr3000-v1|\ cudy,tr3000-v1-ubootmod|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index fbdad933f99..4c96df3121d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -94,6 +94,7 @@ case "$board" in cudy,m3000-v1|\ cudy,m3000-v1-ubootmod|\ cudy,m3000-v2-yt8821|\ + cudy,m3000-v2-yt8821-ubootmod|\ cudy,re3000-v1|\ cudy,tr3000-256mb-v1|\ cudy,tr3000-v1|\ diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index b9e5316920a..79e25abdf73 100644 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -149,6 +149,7 @@ platform_do_upgrade() { comfast,cf-wr632ax-ubootmod|\ creatlentem,clt-r30b1-ubi|\ cudy,m3000-v1-ubootmod|\ + cudy,m3000-v2-yt8821-ubootmod|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ @@ -364,6 +365,7 @@ platform_check_image() { comfast,cf-wr632ax-ubootmod|\ creatlentem,clt-r30b1-ubi|\ cudy,m3000-v1-ubootmod|\ + cudy,m3000-v2-yt8821-ubootmod|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 83bb7d7dc31..8a611c36c7b 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1242,6 +1242,31 @@ define Device/cudy_m3000-v2-yt8821 endef TARGET_DEVICES += cudy_m3000-v2-yt8821 +define Device/cudy_m3000-v2-yt8821-ubootmod + DEVICE_VENDOR := Cudy + DEVICE_MODEL := M3000 + DEVICE_VARIANT := v2 with Motorcomm YT8821 (OpenWrt U-Boot layout) + DEVICE_DTS := mt7981b-cudy-m3000-v2-yt8821-ubootmod + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-phy-motorcomm + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 cudy-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cudy_m3000-v2-yt8821 +endef +TARGET_DEVICES += cudy_m3000-v2-yt8821-ubootmod + define Device/cudy_re3000-v1 DEVICE_VENDOR := Cudy DEVICE_MODEL := RE3000