From: Sherry Sun <sherry.sun@nxp.com>
Date: Wed, 22 Apr 2026 09:35:46 +0000 (+0800)
Subject: arm64: dts: imx8mp: Add Root Port node and PERST property
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=396fbe9a028db8014f7566c0c023f53f3d0b77eb;p=thirdparty%2Flinux.git

arm64: dts: imx8mp: Add Root Port node and PERST property

Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2feb5b18645c..a7f3acdc36d1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -770,6 +770,7 @@
 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
 	vpcie3v3aux-supply = <&reg_pcie0>;
@@ -783,6 +784,10 @@
 	status = "disabled";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 90d7bb8f5619..5ce2825182fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -2265,6 +2265,17 @@
 			phys = <&pcie_phy>;
 			phy-names = "pcie-phy";
 			status = "disabled";
+
+			pcie0_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_ep: pcie_ep: pcie-ep@33800000 {