From: Tom Rini Date: Tue, 18 Nov 2025 21:00:12 +0000 (-0600) Subject: Gitlab: Add a "sage-lab" stage to access a board farm X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=39c717dad8caa31567aae8473386f41097e725bc;p=thirdparty%2Fu-boot.git Gitlab: Add a "sage-lab" stage to access a board farm This is the Gitlab side of adding support for the board lab connected to the "konsulko-sage" runner. On the software side, this lab uses only upstream labgrid. On the hardware side, each device under test is connected to its own exporter (typically a Raspberry Pi 4) that must be turned on (and cleanly turned off) as part of a given test cycle. Add support for testing on a SolidRun Hummingboard 2 (imx6), Raspberry Pi 3 and Raspberry Pi 4. In all cases, we enable additional options to run more tests on the board. As we have some networking tests, we test both the legacy network stack and lwIP. In the case of Pi platforms, we test all of 32bit configuration, plain configuration and rpi_arm64, and again with and without lwIP. Signed-off-by: Tom Rini --- diff --git a/.gitlab-ci-sage-lab.yml b/.gitlab-ci-sage-lab.yml new file mode 100644 index 00000000000..d29af92565a --- /dev/null +++ b/.gitlab-ci-sage-lab.yml @@ -0,0 +1,186 @@ +# Definition for the lab connected to the "sage" host and managed with labgrid + +.sage_lab_template: &sage_lab_dfn + stage: sage-lab + rules: + - if: $SAGE_LAB == "1" + when: always + - if: $SAGE_LAB != "1" + when: manual + allow_failure: true + # USB can be unreliable. + retry: 2 + dependencies: [] + needs: [ "sandbox test.py" ] + tags: [ 'konsulko-sage-labgrid' ] + before_script: + # Clone uboot-test-hooks + - git config --global --add safe.directory "${CI_PROJECT_DIR}" + - git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks + - ln -s sage /tmp/uboot-test-hooks/bin/`hostname` + - ln -s sage /tmp/uboot-test-hooks/py/`hostname` + - export LG_ENV="/tmp/uboot-test-hooks/bin/sage/labgrid-sage-env.yaml"; + export LG_COORDINATOR=172.17.0.1:20408 + # Prepare python environment + - python3 -m venv /tmp/venv; + . /tmp/venv/bin/activate; + pip install -r test/py/requirements.txt -r tools/binman/requirements.txt + -r tools/buildman/requirements.txt -r tools/u_boot_pylib/requirements.txt + labgrid setuptools + # Add more tools + - sudo apt-get update && sudo apt-get -y install snmp rsync + # Acquire and turn on the exporter. + - labgrid-client reserve --wait board=${LABGRID_EXPORTER} && + labgrid-client -p ${LABGRID_EXPORTER} acquire && + labgrid-client -p ${LABGRID_EXPORTER} power on + # Prepare ssh + - mkdir --mode=0700 ~/.ssh; + printf 'Host sage-exporter-*\n\tUser labgrid\n' > ~/.ssh/config + script: + - export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD} + # Don't stop on non-zero exit codes now, to provide as much chance as + # possible to ensure we don't leave lab resources acquired. + - set +e; + # Sage is 16 threads and has 3 devices attached, so 6 builder threads. + - tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e + --board ${TEST_PY_BD} ${OVERRIDE} -T 6; + RC=`echo $?`; + # Wait for the exporter to have the device ready + - while test `labgrid-client resources | + grep -q ${LABGRID_EXPORTER}/${LG_PLACE}/; echo $?` -ne 0; do sleep 1; + done + # Fingerprint the exporter + - ssh-keyscan ${LABGRID_EXPORTER} > ~/.ssh/known_hosts 2>/dev/null + # If we built, run the tests and save the results. + - export PATH=/tmp/uboot-test-hooks/bin:${PATH}; + export PYTHONPATH=/tmp/uboot-test-hooks/py/sage; + test $RC -eq 0 && labgrid-client reserve --wait board=${LG_PLACE} && + labgrid-client -p ${LG_PLACE} acquire && + ./test/py/test.py -ra --bd ${TEST_PY_BD} ${TEST_PY_ID} + ${TEST_PY_EXTRA:-"--capture=tee-sys"} + ${TEST_PY_TEST_SPEC:+"-k ${TEST_PY_TEST_SPEC}"} + --build-dir "$UBOOT_TRAVIS_BUILD_DIR" + --junitxml=/tmp/${TEST_PY_BD}/results.xml; + RC=`echo $?`; + cp -v /tmp/${TEST_PY_BD}/*.{html,css,xml} .; + # Release and power off everything. + - labgrid-client -p ${LG_PLACE} power off + - labgrid-client -p ${LG_PLACE} release + - labgrid-client -p ${LABGRID_EXPORTER} ssh sudo poweroff && sleep 15 && + labgrid-client -p ${LABGRID_EXPORTER} power off + - labgrid-client -p ${LABGRID_EXPORTER} release + - exit $RC + artifacts: + when: always + paths: + - "*.html" + - "*.css" + - results.xml + reports: + junit: results.xml + expire_in: 1 week + +SolidRun Hummingboard 2: + <<: *sage_lab_dfn + variables: + LABGRID_EXPORTER: "sage-exporter-hb-1" + LG_PLACE: "hb-1" + TEST_PY_BD: "mx6cuboxi" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG" + +SolidRun Hummingboard 2 (lwIP): + <<: *sage_lab_dfn + needs: [ "SolidRun Hummingboard 2" ] + variables: + LABGRID_EXPORTER: "sage-exporter-hb-1" + LG_PLACE: "hb-1" + TEST_PY_BD: "mx6cuboxi" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a NET_LWIP" + +Raspberry Pi 4: + <<: *sage_lab_dfn + variables: + LABGRID_EXPORTER: "sage-exporter-rpi4-1" + LG_PLACE: "rpi4-1" + TEST_PY_BD: "rpi_4" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 4 (rpi_arm64): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 4" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi4-1" + LG_PLACE: "rpi4-1" + TEST_PY_BD: "rpi_arm64" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 4 (rpi_arm64, lwIP): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 4 (rpi_arm64)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi4-1" + LG_PLACE: "rpi4-1" + TEST_PY_BD: "rpi_arm64" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP" + +Raspberry Pi 4 (rpi_4_32b): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 4 (rpi_arm64, lwIP)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi4-1" + LG_PLACE: "rpi4-1" + TEST_PY_BD: "rpi_4_32b" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 4 (rpi_4_32b, lwIP): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 4 (rpi_4_32b)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi4-1" + LG_PLACE: "rpi4-1" + TEST_PY_BD: "rpi_4_32b" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP" + +Raspberry Pi 3: + <<: *sage_lab_dfn + variables: + LABGRID_EXPORTER: "sage-exporter-rpi3-1" + LG_PLACE: "rpi3-1" + TEST_PY_BD: "rpi_3" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 3 (rpi_arm64): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 3" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi3-1" + LG_PLACE: "rpi3-1" + TEST_PY_BD: "rpi_arm64" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 3 (rpi_arm64, lwIP): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 3 (rpi_arm64)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi3-1" + LG_PLACE: "rpi3-1" + TEST_PY_BD: "rpi_arm64" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP" + +Raspberry Pi 3 (rpi_3_32b): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 3 (rpi_arm64, lwIP)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi3-1" + LG_PLACE: "rpi3-1" + TEST_PY_BD: "rpi_3_32b" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000" + +Raspberry Pi 3 (rpi_3_32b, lwIP): + <<: *sage_lab_dfn + needs: [ "Raspberry Pi 3 (rpi_3_32b)" ] + variables: + LABGRID_EXPORTER: "sage-exporter-rpi3-1" + LG_PLACE: "rpi3-1" + TEST_PY_BD: "rpi_3_32b" + OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP" diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 5e9995aed6a..8aab61dcb62 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -5,6 +5,7 @@ variables: DEFAULT_AMD64_TAG: "amd64" DEFAULT_FAST_TAG: "fast" MIRROR_DOCKER: docker.io + SAGE_LAB: "" SJG_LAB: "" PLATFORM: linux/amd64,linux/arm64 @@ -24,6 +25,7 @@ image: ${MIRROR_DOCKER}/trini/u-boot-gitlab-ci-runner:noble-20251001-11Nov2025 stages: - testsuites - test.py + - sage-lab - sjg-lab - world build @@ -593,6 +595,9 @@ coreboot test.py: TEST_PY_ID: "--id qemu" <<: *buildman_and_testpy_dfn +# Add sage-lab stage +include: .gitlab-ci-sage-lab.yml + .sjg_lab_template: &sjg_lab_dfn stage: sjg-lab rules: