From: Ian Abbott Date: Fri, 30 Jan 2026 16:48:08 +0000 (+0000) Subject: comedi: pcmuio: Add sanity checks for I/O base address X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3d4ab5484aa249f4950eba7f697cff6b3f024c7c;p=thirdparty%2Fkernel%2Flinux.git comedi: pcmuio: Add sanity checks for I/O base address The "pcmmio" driver uses an admin-supplied configuration option (`it->options[0]`) to configure the I/O port base address of a PCM-UIO48A or PCM-UIO96A board. It will probably work with the later PCM-UIO48C and PCM-UIO96C boards. It currently allows any base address to be configured but the hardware only supports base addresses (configured by on-board jumpers) in the range 0 to 0xFFF0 on 16-byte boundaries (for PCM-UIO48C) or 0 to 0xFFE0 on 32-byte boundaries (for PCM-UIO96C). (The PCM-UIO48A supports base addresses up to 0xFF0 and the PCI-UIO96A supports base addresses up to 0x7E0.) Add a sanity check to ensure the device is not configured at an unsupported base address (allowing for the extended range of the "C" models). Signed-off-by: Ian Abbott Link: https://patch.msgid.link/20260130170416.49994-44-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/comedi/drivers/pcmuio.c b/drivers/comedi/drivers/pcmuio.c index 33b24dbbb919..0995911a3ea3 100644 --- a/drivers/comedi/drivers/pcmuio.c +++ b/drivers/comedi/drivers/pcmuio.c @@ -521,11 +521,12 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it) const struct pcmuio_board *board = dev->board_ptr; struct comedi_subdevice *s; struct pcmuio_private *devpriv; + unsigned int io_len = board->num_asics * PCMUIO_ASIC_IOSIZE; int ret; int i; - ret = comedi_request_region(dev, it->options[0], - board->num_asics * PCMUIO_ASIC_IOSIZE); + ret = comedi_check_request_region(dev, it->options[0], io_len, + 0, 0xffff, io_len); if (ret) return ret;