From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Date: Mon, 13 Oct 2025 23:54:59 +0000 (+0300)
Subject: arm64: dts: qcom: sm8550-qrd: Enable CAMSS and S5K3M5 camera sensor
X-Git-Tag: v6.19-rc1~100^2~14^2~57
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3f857377578740f73fbead7f154a56db20e05f82;p=thirdparty%2Flinux.git

arm64: dts: qcom: sm8550-qrd: Enable CAMSS and S5K3M5 camera sensor

Enable CAMSS IP and Samsung S5K3M5 camera sensor on SM8550-QRD board.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20251013235500.1883847-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index a3f4200a1145d..9af2a4fd02ea5 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -716,6 +716,52 @@
 	};
 };
 
+&camss {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	ports {
+		port@3 {
+			csiphy3_ep: endpoint {
+				clock-lanes = <4>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&cam_tele>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	sensor@10 {
+		compatible = "samsung,s5k3m5";
+		reg = <0x10>;
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+		reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam3_default>;
+		pinctrl-names = "default";
+		afvdd-supply = <&vreg_l7n_2p96>;
+		avdd-supply = <&vreg_l4m_2p8>;
+		dovdd-supply = <&vreg_l5n_1p8>;
+		dvdd-supply = <&vreg_l2m_1p056>;
+
+		port {
+			cam_tele: endpoint {
+				link-frequencies = /bits/ 64 <602500000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
 &i2c_master_hub_0 {
 	status = "okay";
 };