From: Hiago De Franco Date: Sun, 29 Jun 2025 17:25:11 +0000 (-0300) Subject: remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=496deecb020d14ba89ba7084fbc3024f91687023;p=thirdparty%2Flinux.git remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered up and started by the Cortex-A core using the bootloader (e.g., via the U-Boot bootaux command), both M-core and Linux run within the same SCFW (System Controller Firmware) partition. With that, Linux has permission to control the M-core. But once the M-core is started by the bootloader, the SCFW automatically enables its clock and sets the clock rate. If Linux later attempts to enable the same clock via clk_prepare_enable(), the SCFW returns a 'LOCKED' error, as the clock is already configured by the SCFW. This causes the probe function in imx_rproc.c to fail, leading to the M-core power domain being shut down while the core is still running. This results in a fault from the SCU (System Controller Unit) and triggers a system reset. To address this issue, ignore handling the clk for i.MX8X and i.MX8 M-core, as SCFW already takes care of enabling and configuring the clock. Suggested-by: Peng Fan Reviewed-by: Ulf Hansson Reviewed-by: Peng Fan Signed-off-by: Hiago De Franco Acked-by: Mathieu Poirier Link: https://lore.kernel.org/r/20250629172512.14857-3-hiagofranco@gmail.com Signed-off-by: Ulf Hansson --- diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c index 74299af1d7f10..627e57a88db21 100644 --- a/drivers/remoteproc/imx_rproc.c +++ b/drivers/remoteproc/imx_rproc.c @@ -1029,8 +1029,8 @@ static int imx_rproc_clk_enable(struct imx_rproc *priv) struct device *dev = priv->dev; int ret; - /* Remote core is not under control of Linux */ - if (dcfg->method == IMX_RPROC_NONE) + /* Remote core is not under control of Linux or it is managed by SCU API */ + if (dcfg->method == IMX_RPROC_NONE || dcfg->method == IMX_RPROC_SCU_API) return 0; priv->clk = devm_clk_get(dev, NULL);