From: David DeGraw Date: Fri, 18 Apr 2025 17:55:34 +0000 (-0600) Subject: ramips: add support for Cudy R700 X-Git-Tag: v24.10.5~14 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=4a3409f628e2aebabac02c81750b25373c22d992;p=thirdparty%2Fopenwrt.git ramips: add support for Cudy R700 This is the same hardware as the Cudy WR2100 that's had support for some time now, just without the WLAN hardware. This PR is mostly copied from the commit that added support for the WR2100, here: 3501db9 Specifications: SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB Ethernet: 5x Gbit ports Installation: There are two known options: The Luci-based UI. Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. A signed firmware can be found in GitHub PR #18532. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Link: https://github.com/openwrt/openwrt/pull/18532 Signed-off-by: David DeGraw (cherry picked from commit 75403dd1d05bea1b65349ebb9f8b7deb40b9c802) Link: https://github.com/openwrt/openwrt/pull/21068 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7621_cudy_r700.dts b/target/linux/ramips/dts/mt7621_cudy_r700.dts new file mode 100644 index 00000000000..6d1c1ec004a --- /dev/null +++ b/target/linux/ramips/dts/mt7621_cudy_r700.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "cudy,r700", "mediatek,mt7621-soc"; + model = "Cudy R700"; + + aliases { + led-boot = &led_internet_blue; + led-failsafe = &led_internet_blue; + led-running = &led_internet_blue; + led-upgrade = &led_internet_blue; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_internet_blue: internet_blue { + label = "blue:internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "red:internet"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + wan { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "green:lan1"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "green:lan2"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "green:lan3"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "green:lan4"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_bdinfo_de00 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@fd0000 { + label = "debug"; + reg = <0xfd0000 0x10000>; + read-only; + }; + + partition@fe0000 { + label = "backup"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "bdinfo"; + reg = <0xff0000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_de00: macaddr@de00 { + compatible = "mac-base"; + reg = <0xde00 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "jtag", "uart3", "wdt"; + function = "gpio"; + }; +}; + +&gmac1 { + status = "okay"; + label = "wan"; + phy-handle = <ðphy4>; + + nvmem-cells = <&macaddr_bdinfo_de00 1>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 83b8767622a..31bdb40b26b 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -795,6 +795,16 @@ define Device/cudy_wr2100 endef TARGET_DEVICES += cudy_wr2100 +define Device/cudy_r700 + $(Device/dsa-migration) + DEVICE_VENDOR := Cudy + DEVICE_MODEL := R700 + IMAGE_SIZE := 15872k + UIMAGE_NAME := R29 + DEVICE_PACKAGES := -uboot-envtools +endef +TARGET_DEVICES += cudy_r700 + define Device/cudy_x6-v1 $(Device/dsa-migration) IMAGE_SIZE := 32256k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 94f36c1f6e4..4c4e7a2f42e 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -66,6 +66,7 @@ genexis,pulse-ex400|\ netis,n6) ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx" ;; +cudy,r700|\ cudy,wr2100) ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"