From: Hendrik Hamerlinck Date: Tue, 13 May 2025 11:09:31 +0000 (+0200) Subject: docs: fix "incase" typo in coresight/panic.rst X-Git-Tag: v6.16-rc1~176^2~12 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=52092c1d501bb56432c667d397008faad8acbd90;p=thirdparty%2Flinux.git docs: fix "incase" typo in coresight/panic.rst Corrects a spelling mistake in Documentation/trace/coresight/panic.rst where "incase" was used instead of "in case". Signed-off-by: Hendrik Hamerlinck Signed-off-by: Jonathan Corbet Message-ID: <20250513110931.15072-1-hendrik.hamerlinck@hammernet.be> --- diff --git a/Documentation/trace/coresight/panic.rst b/Documentation/trace/coresight/panic.rst index a58aa914c241c..6e4bde953cae1 100644 --- a/Documentation/trace/coresight/panic.rst +++ b/Documentation/trace/coresight/panic.rst @@ -67,8 +67,8 @@ Trace data captured at the time of panic, can be read from rebooted kernel or from crashdump kernel using a special device file /dev/crash_tmc_xxx. This device file is created only when there is a valid crashdata available. -General flow of trace capture and decode incase of kernel panic -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +General flow of trace capture and decode in case of kernel panic +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Enable source and sink on all the cores using the sysfs interface. ETR sinks should have trace buffers allocated from reserved memory, by selecting "resrv" buffer mode from sysfs.