From: Cheng Ming Lin <chengminglin@mxic.com.tw>
Date: Tue, 5 May 2026 01:34:52 +0000 (+0800)
Subject: mtd: spinand: Add support for randomizer
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=54e1bc80af0c993afc6a2283722f8d4535b10d40;p=thirdparty%2Fkernel%2Fstable.git

mtd: spinand: Add support for randomizer

This patch adds support for the randomizer feature.

It introduces a 'set_randomizer' callback in 'struct spinand_info' and
'struct spinand_device'.

If a driver implements this callback, the core will invoke it during
device initialization (spinand_init) to enable or disable the randomizer
feature based on the device tree configuration.

Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index f1084d5e04b9..f86786344d52 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1328,6 +1328,22 @@ static int spinand_create_dirmaps(struct spinand_device *spinand)
 	return 0;
 }
 
+static int spinand_randomizer_init(struct spinand_device *spinand)
+{
+	struct device_node *np = spinand->spimem->spi->dev.of_node;
+	u32 rand_val;
+	int ret;
+
+	if (!spinand->set_randomizer)
+		return 0;
+
+	ret = of_property_read_u32(np, "nand-randomizer", &rand_val);
+	if (ret)
+		return 0;
+
+	return spinand->set_randomizer(spinand, rand_val);
+}
+
 static const struct nand_ops spinand_ops = {
 	.erase = spinand_erase,
 	.markbad = spinand_markbad,
@@ -1619,6 +1635,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
 		spinand->user_otp = &table[i].user_otp;
 		spinand->read_retries = table[i].read_retries;
 		spinand->set_read_retry = table[i].set_read_retry;
+		spinand->set_randomizer = table[i].set_randomizer;
 
 		/* I/O variants selection with single-spi SDR commands */
 
@@ -1942,6 +1959,9 @@ static int spinand_init(struct spinand_device *spinand)
 	 * ECC initialization must have happened previously.
 	 */
 	spinand_cont_read_init(spinand);
+	ret = spinand_randomizer_init(spinand);
+	if (ret)
+		goto err_cleanup_nanddev;
 
 	mtd->_read_oob = spinand_mtd_read;
 	mtd->_write_oob = spinand_mtd_write;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 44f4347104d6..ec6efcfeef83 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -593,6 +593,7 @@ enum spinand_bus_interface {
  * @user_otp: SPI NAND user OTP info.
  * @read_retries: the number of read retry modes supported
  * @set_read_retry: enable/disable read retry for data recovery
+ * @set_randomizer: enable/disable randomizer support
  *
  * Each SPI NAND manufacturer driver should have a spinand_info table
  * describing all the chips supported by the driver.
@@ -622,6 +623,8 @@ struct spinand_info {
 	unsigned int read_retries;
 	int (*set_read_retry)(struct spinand_device *spinand,
 			     unsigned int read_retry);
+	int (*set_randomizer)(struct spinand_device *spinand,
+			      bool enable);
 };
 
 #define SPINAND_ID(__method, ...)					\
@@ -686,6 +689,9 @@ struct spinand_info {
 	.read_retries = __read_retries,					\
 	.set_read_retry = __set_read_retry
 
+#define SPINAND_RANDOMIZER(__set_randomizer)				\
+	.set_randomizer = __set_randomizer
+
 #define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants,	\
 		     __flags, ...)					\
 	{								\
@@ -771,6 +777,7 @@ struct spinand_mem_ops {
  * @user_otp: SPI NAND user OTP info.
  * @read_retries: the number of read retry modes supported
  * @set_read_retry: Enable/disable the read retry feature
+ * @set_randomizer: Enable/disable the randomizer feature
  */
 struct spinand_device {
 	struct nand_device base;
@@ -804,6 +811,8 @@ struct spinand_device {
 	bool cont_read_possible;
 	int (*set_cont_read)(struct spinand_device *spinand,
 			     bool enable);
+	int (*set_randomizer)(struct spinand_device *spinand,
+			      bool enable);
 
 	const struct spinand_fact_otp *fact_otp;
 	const struct spinand_user_otp *user_otp;