From: Fabio Estevam Date: Tue, 13 May 2025 14:23:19 +0000 (-0300) Subject: ARM: dts: imx7s-warp: Improve the Wifi description X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=55b8480a5e0a82351862981ea3b7f296cff4ec04;p=thirdparty%2Flinux.git ARM: dts: imx7s-warp: Improve the Wifi description GPIO5_10 is connected to the BCM43455 WL_REG_ON pin and it is better descrbed via mmc-pwrseq-simple.yaml. Also improve the Wifi devicetree description by passing a compatible string that describes the BCM43455 presence as per brcm,bcm4329-fmac.yaml. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index b66e612d33292..f2cd95e992e74 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -31,18 +31,6 @@ }; }; - reg_brcm: regulator-brcm { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; - reg_peri_3p15v: regulator-peri-3p15v { compatible = "regulator-fixed"; regulator-name = "peri_3p15v_reg"; @@ -51,6 +39,14 @@ regulator-always-on; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -301,14 +297,21 @@ }; &usdhc1 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; keep-power-in-suspend; no-1-8-v; non-removable; - vmmc-supply = <®_brcm>; + mmc-pwrseq = <&sdio_pwrseq>; status = "okay"; + + wifi@0 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <0>; + }; }; &usdhc3 {