From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Sat, 10 Jan 2026 11:58:38 +0000 (+0100)
Subject: ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=57c31e6d620f132dcf610b2c52b4cdbd203c6f4a;p=thirdparty%2Flinux.git

ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons

After starting to use platform devices for representing buttons
enumerated via ACPI, acpi_mark_gpe_for_wake() is insufficient for
preparing their GPEs to wake up the system from sleep because it
does not change the "dispatch type" of the given GPE to
ACPI_GPE_DISPATCH_NOTIFY.  Subsequently, this causes acpi_enable_gpe()
in __acpi_device_wakeup_enable() to fail and system suspend transitions
to be aborted.

Address this by updating acpi_wakeup_gpe_init() to use
acpi_setup_gpe_for_wake() for buttons like for any other devices.

This allows acpi_setup_gpe_for_wake() to be simplified further because
buttons are not a special case in it any more, so do that as well.

Fixes: 52d864019636 ("ACPI: button: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/2259694.irdbgypaU6@rafael.j.wysocki
---

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 360d82378e56e..b4301c797701b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -999,15 +999,11 @@ static int acpi_bus_extract_wakeup_device_power_package(struct acpi_device *dev)
 	return err;
 }
 
-/* Do not use a button for S5 wakeup */
-#define ACPI_AVOID_WAKE_FROM_S5		BIT(0)
-
 static bool acpi_wakeup_gpe_init(struct acpi_device *device)
 {
 	static const struct acpi_device_id button_device_ids[] = {
-		{"PNP0C0C", 0},				/* Power button */
-		{"PNP0C0D", ACPI_AVOID_WAKE_FROM_S5},	/* Lid */
-		{"PNP0C0E", ACPI_AVOID_WAKE_FROM_S5},	/* Sleep button */
+		{"PNP0C0D", 0},	/* Lid */
+		{"PNP0C0E", 0},	/* Sleep button */
 		{"", 0},
 	};
 	struct acpi_device_wakeup *wakeup = &device->wakeup;
@@ -1016,15 +1012,9 @@ static bool acpi_wakeup_gpe_init(struct acpi_device *device)
 
 	wakeup->flags.notifier_present = 0;
 
-	/* Power button, Lid switch always enable wakeup */
 	match = acpi_match_acpi_device(button_device_ids, device);
-	if (match) {
-		if ((match->driver_data & ACPI_AVOID_WAKE_FROM_S5) &&
-		    wakeup->sleep_state == ACPI_STATE_S5)
-			wakeup->sleep_state = ACPI_STATE_S4;
-		acpi_mark_gpe_for_wake(wakeup->gpe_device, wakeup->gpe_number);
-		return true;
-	}
+	if (match && wakeup->sleep_state == ACPI_STATE_S5)
+		wakeup->sleep_state = ACPI_STATE_S4;
 
 	status = acpi_setup_gpe_for_wake(device->handle, wakeup->gpe_device,
 					 wakeup->gpe_number);