From: Jouni Malinen Date: Tue, 22 Sep 2015 08:55:54 +0000 (+0300) Subject: Avoid reconnection on ENABLE_NETWORK if already connected X-Git-Tag: hostap_2_5~20 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5a1d9d1a8ea540f6d79d3a8f8fdf0ed0e2f19e54;p=thirdparty%2Fhostap.git Avoid reconnection on ENABLE_NETWORK if already connected This was already the case for most command sequences, but it was possible for wpa_s->reassociate to be set to 1 when CTRL-RSP-* commands were used to set identity, password, or passphrase for EAP authentication. In such cases, ENABLE_NETWORK issued after the connection was completed could result in a new connection attempt (likely reconnection back to the same BSS). Fix this by checking whether an actual connection is already present even if wpa_s->reassociate is set when processing the ENABLE_NETWORK command. Signed-off-by: Jouni Malinen --- diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c index fa94cc712..acfe95b5e 100644 --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c @@ -2574,7 +2574,10 @@ void wpa_supplicant_enable_network(struct wpa_supplicant *wpa_s, } else wpa_supplicant_enable_one_network(wpa_s, ssid); - if (wpa_s->reassociate && !wpa_s->disconnected) { + if (wpa_s->reassociate && !wpa_s->disconnected && + (!wpa_s->current_ssid || + wpa_s->wpa_state == WPA_DISCONNECTED || + wpa_s->wpa_state == WPA_SCANNING)) { if (wpa_s->sched_scanning) { wpa_printf(MSG_DEBUG, "Stop ongoing sched_scan to add " "new network to scan filters");