From: Chet Ramey Date: Fri, 26 Apr 2013 19:20:04 +0000 (-0400) Subject: bash-20130328 remove leftover and stray files X-Git-Tag: bash-4.4-alpha~152 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5eba5184356e01c501f3252f84658477031ed8c7;p=thirdparty%2Fbash.git bash-20130328 remove leftover and stray files --- diff --git a/CWRU/CWRU.chlog~ b/CWRU/CWRU.chlog~ deleted file mode 100644 index 6eb051797..000000000 --- a/CWRU/CWRU.chlog~ +++ /dev/null @@ -1,4789 +0,0 @@ - 2/14/2011 - --------- -[bash-4.2 released] - - 2/15 - ---- -lib/glob/gmisc.c - - fix wmatchlen and umatchlen to avoid going past the end of the - string on an incomplete bracket expression that ends with a - NUL. Partial fix for bug reported by Clark Wang - - 2/16 - ---- -subst.h - - new string extract flag value: SX_WORD. Used when calling - extract_dollar_brace_string to skip over the word in - ${param op word} from parameter_brace_expand - -subst.c - - change parameter_brace_expand to add SX_WORD to flags passed to - extract_dollar_brace_string - - change parameter_brace_expand to use SX_POSIXEXP for all non-posix - word expansion operators that treat single quotes as special, not - just % and # - - change extract_dollar_brace_string to initialize dolbrace_state to - DOLBRACE_WORD if SX_WORD flag supplied and we shouldn't use - DOLBRACE_QUOTE. Fixes bug reported by Juergen Daubert - -doc/{bash.1,bashref.texi} - - document the exact expansions here strings undergo - - 2/17 - ---- -lib/readline/vi_mode.c - - make sure that `dd', `cc', and `yy' call vidomove_dispatch from - rl_domove_read_callback. Fixes bug reported by Clark Wang - - -lib/readline/callback.c - - make sure _rl_internal_char_cleanup is called after the - vi-motion callbacks (rl_vi_domove_callback) in rl_callback_read_char. - Companion to above fix - -doc/{bash.1,bashref.texi} - - make sure that the text describing the rhs of the == and =~ - operators to [[ states that only the quoted portion of the pattern - is matched as a string - - 2/18 - ---- -lib/glob/gmisc.c - - better fix for umatchlen/wmatchlen: keep track of the number of - characters in a bracket expression as the value to increase - matchlen by if the bracket expression is not well-formed. Fixes - bug reported by Clark Wang - -subst.c - - change expand_string_for_rhs so that it sets the W_NOSPLIT2 flag - in the word flags. We will not perform word splitting or quote - removal on the result, so we do not want to add quoted nulls if - we see "" or ''. Fixes bug reported by Mike Frysinger - - - 2/19 - ---- -variables.c - - new function, int chkexport(name), checks whether variable NAME is - exported and remakes the export environment if necessary. Returns - 1 if NAME is exported and 0 if not - - call chkexport(name) to get tzset to look at the right variable in - the environment when modifying TZ in sv_tz. Don't call tzset if - chkexport doesn't indicate that the variable is exported - -variables.h - - new extern declaration for chkexport - - -{parse.y,builtins/printf.def} - - call sv_tz before calling localtime() when formatting time strings - in prompt strings or using printf. Fixes bug reported by - Dennis Williamson - -execute_cmd.c - - modify fix of 2/9 to add casts when those variables are passed to - functions; some compilers throw errors instead of warnings. Report - and fix from Joachim Schmitz - -support/shobj-conf - - add a stanza for nsk on the Tandem from Joachim Schmitz - - -{shell,lib/readline/shell}.c - - Tandem systems should use getpwnam (getlogin()); for some reason - they don't do well with using getuid(). Fix from Joachim Schmitz - - - 3/1 - --- -variables.c - - make sure that the return value from find_variable is non-null - before trying to use it in chkexport. Fixes bug reported by - Evangelos Foutras - - 3/3 - --- -parse.y - - when adding $$ to the current token buffer in read_token_word(), - don't xmalloc a buffer for two characters and then strcpy it, just - copy the characters directly into the token buffer. Fix from - Michael Whitten - -execute_cmd.c - - fix expand_word_unsplit to add the W_NOSPLIT2 flag to the word to - be expanded, so "" doesn't add CTLNUL. Similar to fix of 2/18 to - expand_string_for_rhs. Fixes bug reported by Nathanael D. Noblet - and Matthias Klose - -parse.y - - fix extended_glob case of read_token_word to allocate an extra - space in the buffer for the next character read after the extended - glob specification if it's a CTLESC or CTLNUL. Report and fix from - Michael Witten - - fix shell expansions case of read_token_word to allocate an extra - space in the buffer for the next character read after the shell - expansion if it's a CTLESC or CTLNUL. Report and fix from - Michael Witten - - TENTATIVE: fix read_token_word to reduce the amount of buffer space - required to hold the translated and double-quoted value of $"..." - strings. Report and fix from Michael Witten - - change code around got_character and got_escaped_character labels to - make sure that we call RESIZE_MALLOCED_BUFFER before adding the - CTLESC before a CTLESC or CTLNUL, and before adding the character if - we're not adding a CTLESC. Report and fix from - Michael Witten - -subst.c - - new param flags value, PF_ASSIGNRHS, mirrors W_ASSIGNRHS, noting that - parameter expansion is on rhs of assignment statement. That inhibits - word splitting - - change param_expand to call string_list_dollar_at with quoted == 1 - if PF_ASSIGNRHS is set, so it will quote IFS characters in the - positional parameter before separating them with the first char of - $IFS. This keeps the rhs from being split inappropriately. Fixes - bug reported by Andres Perera - - 3/4 - --- -lib/readline/bind.c - - add a missing free of `names' in rl_function_dumper. Bug report - and fix from Michael Snyder - - 3/5 - --- -lib/readline/rltty.c - - change rl_deprep_terminal so it uses fileno (stdin) for the tty fd - if rl_instream is not set, like rl_prep_terminal - - 3/6 - --- -lib/readline/display.c - - fix rl_message to use a dynamically-allocated buffer instead of a - fixed-size buffer of 128 chars for the `local message prompt'. Bug - report and fix from Micah Cowan - - 3/7 - --- -jobs.c - - add sentinel to wait_sigint_handler so it only sets wait_sigint_received - if waiting_for_child is non-zero; otherwise, it restores the old - SIGINT handler and sends itself the SIGINT - - set waiting_for_child around the calls to waitchld that use it to - synchronously wait for a process - - change logic that decides whether or not the child process blocked - or handled SIGINT based on whether or not waitpid returns -1/EINTR - and the shell receives a SIGINT and the child does not exit. If - the child later exits due to SIGINT, cancel the assumoption that it - was handled - - instead of testing whether or not the child exited due to SIGINT - when deciding whether the shell should act on a SIGINT it received - while waiting, test whether or not we think the child caught - SIGINT. If it did, we let it go (unless the shell has it trapped); - if it did not catch it, the shell acts on the SIGINT. Fix from - Linus Torvalds , bug report originally - from Oleg Nesterov - - 3/8 - --- -shell.c - - initialize no_line_editing to 1 if READLINE is not defined -- we - can't have line editing without readline - - 3/12 - ---- -lib/readline/signals.c - - add SIGHUP to the set of signals readline handles - -lib/readline/doc/rltech.texi - - document that SIGHUP is now part of the set of signals readline - handles - -lib/readline/input.c - - if _rl_caught_signal indicates that read() was interrupted by a - SIGHUP or SIGTERM, return READERR or EOF as appropriate - - call rl_event_hook, if it's set, if call to read in rl_getc - returns -1/EINTR. If rl_event_hook doesn't do anything, this - continues the loop as before. This handles the other fatal - signals - -execute_cmd.c - - add a couple of QUIT; calls to execute_disk_command and - execute_simple_command to improve responsiveness to interrupts - and fatal signals - -input.c - - rearrange getc_with_restart so that the return values from read() - are handled right - -parse.y - - don't need to set terminate_immediately in yy_stream_get, since - getc_with_restart checks for terminating signals itself - - since readline returns READERR on SIGHUP or SIGTERM, don't need - to set terminate_immediately. Still doesn't handle other - signals well -- will have to check that some more - -bashline.c - - new function, bash_event_hook, for rl_event_hook. Just checks for - terminating signals and acts on them using CHECK_TERMSIG. - - set rl_event_hook to bash_event_hook - -builtins/read.def - - take out setting terminate_immediately; add calls to CHECK_TERMSIG - after read calls - -doc/{bash.1,bashref.texi} - - move the text describing the effect of negative subscripts used to - reference indexed array elements to the paragraphs describing - ${parameter[subscript]}, since that's where they are implemented. - Pointed out by Christopher F. A. Johnson - -arrayfunc.[ch],subst.c - - array_expand_index now takes a new first argument: a SHELL_VAR * - of the array variable being subscripted. Can be used later to fully - implement negative subscripts - - 3/14 - ---- -lib/glob/glob.c - - fix mbskipname to not turn the directory entry name into a wide char - string if the conversion of the pattern to a wide char string fails - - fix mbskipname to call skipname if either the pattern or the filename - can't be converted into a wide-char string - -lib/glob/xmbsrtowcs.c - - fix xdupmbstowcs2 to handle return value of 0 from mbsnrtowcs and - short-circuit with failure in that case. Fixes bug reported by - Roman Rakus - - 3/15 - ---- -bashline.c - - new variable, bash_filename_quote_characters to store the value - assigned to rl_filename_quote_characters so it can be restored - if changed. - - change bashline_reset and attempt_shell_completion to restore - rl_filename_quote_characters if not set to default - - 3/22 - ---- -lib/glob/glob.c - - wdequote_pathname falls back to udequote_pathname if xdupmbstowcs - fails to convert the pathname to a wide-character string - -lib/glob/xmbsrtowcs.c - - xdupmbstowcs2: change to fix problem with leading '\\' (results in - nms == 0, which causes it to short-circuit with failure right - away). Fixes bug pointed out by Werner Fink - - xdupmbstowcs2: compensate for mbsnrtowcs returning 0 by taking the - next single-byte character and going on - - xdupmbstowcs2: change memory allocation to increase by WSBUF_INC - bytes; try to avoid calls to realloc (even if they don't actually - result in more memory being allocated) - - 3/24 - ---- -doc/{bash.1,bashref.texi} - - slightly modify BASH_SUBSHELL description based on complaint from - Sam Liddicott - - 3/25 - ---- -trap.c - - change free_trap_strings to not call free_trap_string for signals - that are being ignored, like reset_or_restore_signal_handlers. - Fixes bug reported by Satoshi Takahashi - - 3/26 - ---- -lib/readline/rltypedefs.h - - remove old Function/VFunction/CPFunction/CPPFunction typedefs as - suggested by Tom Tromey - -lib/readline/rlstdc.h - - move defines for USE_VARARGS/PREFER_STDARG/PREFER_VARARGS from - config.h.in to here because declaration of rl_message in - readline.h uses the defines. This makes it hard for another packages - to use after the header files are installed, since config.h is not - one of the installed files. Suggested by Tom Tromey - - - 3/27 - ---- -print_cmd.c - - change indirection_string from a static buffer to a dynamic one - managed by indirection_level_string(), so we don't end up truncating - PS4. Suggested by Dennis Williamson - -lib/readline/shell.c - - change sh_set_lines_and_columns to use static buffers instead of - allocating the buffers to pass to setenv/putenv - -lib/readline/terminal.c - - change _rl_get_screen_size to not call sh_set_lines_and_columns if - ignore_env == 0 - - _rl_sigwinch_resize_terminal: new function to just retrieve terminal - size, ignoring environment - -lib/readline/rlprivate.h - - new external declaration for _rl_sigwinch_resize_terminal() (currently - unused) - -lib/readline/signals.c - - rl_sigwinch_handler: set _rl_caught_signal to SIGWINCH - - rl_sigwinch_handler: don't immediately call rl_resize_terminal; just - leave _rl_caught_signal set for RL_CHECK_SIGNALS to handle - - _rl_signal_handler: call rl_resize_terminal if sig == SIGWINCH. - Should fix hang when sending multiple repeated SIGWINCH reported by - Henning Bekel - - 3/29 - ---- -lib/sh/snprintf.c - - include math.h for any defines for isinf/isnan - - use code from gnulib documentation to implement isinf/isnan if they - are not defined - -configure.in - - don't check for isinf or isnan; c99 says they're macros anyway - -config.h.in - - remove defines for ISINF_IN_LIBC and ISNAN_IN_LIBC, no longer used - by snprintf.c - - 4/2 - --- -braces.c - - brace_gobbler: fix to understand double-quoted command substitution, - since the shell understands unquoted comsubs. Fixes bug reported - by Michael Whitten - -lib/readline/display.c - - include on MDOS - - get and set screen size using DJGPP-specific calls on MSDOS - - move cursor up clear screen using DJGPP-specific calls - - don't call tputs on DJGPP; there is no good terminfo support - -lib/readline/terminal.c - - include on MDOS - - get and set screen size using DJGPP-specific calls on MSDOS - - use DJGPP-specific initialization on MSDOS, zeroing all the - _rl_term_* variables - - don't call tputs on DJGPP; there is no good terminfo support - DJGPP support from Eli Zaretskii - - 4/6 - --- - -config-top.h - - change DEFAULT_PATH_VALUE to something more useful and modern - - 4/8 - --- -tests/printf2.sub - - make sure LC_ALL and LC_CTYPE are set so LANG assignment takes effect. - Reported by Cedric Arbogast - - 4/11 - ---- -include/chartypes.h - - fix a couple of dicey defines (though ones that don't cause any - compiler warnings) in IN_CTYPE_DOMAIN - -doc/{bashref.texi,bash.1} - - add note referring to duplicating file descriptors in sections - describing redirecting stdout and stderr and appending to stdout - and stderr. Suggested by Matthew Dinger - -pcomplete.c - - it_init_helptopics: new function to support completing on help topics, - not just builtins - - it_helptopics: new programmable completion list of help topics - - build list of helptopic completions in gen_action_completions on - demand - -pcomplete.h - - new extern declaration for it_helptopics - -builtins/complete.def - - the `helptopic' action now maps to CA_HELPTOPIC intead of CA_BUILTIN, - since there are more help topics than just builtins. Suggested by - Clark Wang - - 4/12 - ---- -print_cmd.c - - fix print_arith_for_command to add a call to PRINT_DEFERRED_HEREDOCS - before ending the body of the command, so heredocs get attached to - the right command instead of to the loop. From gentoo bug 363371 - http://bugs.gentoo.org/show_bug.cgi?id=363371 - -execute_cmd.c - - change coproc_pidchk to unset the appropriate shell variables when - the (currently single) known coproc pid terminates - - cleanup and new functions to fully support multiple coprocesses when - and if I decide to go there - - 4/13 - ---- -print_cmd.c - - fix print_group_command to add a call to PRINT_DEFERRED_HEREDOCS - after call to make_command_string_internal before printing closing - `}' - - fix make_command_string_internal to add a call to - PRINT_DEFERRED_HEREDOCS after recursive call to - make_command_string_internal in case cm_subshell before printing - closing `)' - - 4/14 - ---- -print_cmd.c - - change overlapping strcpy in named_function_string to memmove - -sig.h - - UNBLOCK_SIGNAL: convenience define, same as UNBLOCK_CHILD, just - restores an old signal mask - -trap.c - - set_signal: instead of setting the signal handler to SIG_IGN while - installing the new trap handler, block the signal and unblock it - after the new handler is installed. Fixes bug reported by Roman - Rakus - - 4/15 - ---- -doc/{bash.1,bashref.texi} - - make it clear that enabling monitor mode means that all jobs run in - separate process groups - - 4/18 - ---- -builtins/fc.def - - update fix of 4/15/2010 to not take saved_command_line_count into - account when stepping down the history list to make sure that - last_hist indexes something that is valid. Fixes bug reported by - - - 4/19 - ---- -builtins/fc.def - - fc_gethnum: make sure the calculation to decide the last history - entry is exactly the same as fc_builtin. Fixes bug uncovered by - fix of 4/18 to stop seg fault - - 4/22 - ---- -lib/readline/terminal.c - - change _rl_enable_meta_key to set a flag indicating that it sent the - enable-meta sequence - - _rl_disable_meta_key: new function to turn off meta mode after we - turned it on with _rl_enable_meta_key - -lib/readline/rlprivate.h - - extern declaration for _rl_disable_meta_key - -configure.in - - if not cross-compiling, set CFLAGS_FOR_BUILD from any CFLAGS inherited - from the environment. Fixes HP/UX build problem reported by - "Daniel Richard G." - - 4/26 - ---- -config-top.h - - define MULTIPLE_COPROCS to 0 so the code is still disabled but easy - to enable via configure option or editing this file - - 4/29 - ---- -lib/sh/eaccess.c - - freebsd provides faccessat, with the same misfeature as their eaccess - and access implementations (X_OK returns true for uid==0 regardless - of the actual file permissions), so reorganize code to check the - file permissions as with eaccess. Report and fix from Johan Hattne - - - 5/2 - --- -doc/{bash.1,bashref.texi} - - add forward reference to `Pattern Matching' from `Pathname - Expansion', suggested by Greg Wooledge - - 5/5 - --- -pcomplib.c - - the bash_completion project now distributes over 200 completions - for various programs, with no end in sight, so increase the value - of COMPLETE_HASH_BUCKETS from 32 to 128 - -pathexp.c - - quote_string_for_globbing: make sure CTLESC quoting CTLESC is - translated into \ even if the flags include QGLOB_REGEXP. - We don't want to process the second CTLESC as a quote character. - Fixes bug reported by Shawn Bohrer - - 5/6 - --- -builtins/printf.def - - change PRETURN to not call fflush if ferror(stdout) is true - - if a call to one of the stdio functions or printstr leaves - ferror(stdout) true, and PRETURN is going to be called, let PRETURN - print the error message rather than doubling up the messages. Fixes - problem reported by Roman Rakus - - 5/9 - --- -doc/{bash.1,bashref.texi} - - add note to the effect that lists inside compound command can be - terminated by newlines as well as semicolons. Suggested by - Roman Byshko - - 5/10 - ---- -subst.c - - remove_quoted_nulls: fix problem that caused it to skip over the - character after a CTLNUL, which had the effect of skipping every - other of a series of CTLNULs. Fixes bug reported by - Marten Wikstrom - - 5/11 - ---- -subst.c - - extract_process_subst: add SX_COMMAND flag to call to - extract_delimited_string, since we're expanding the same sort of - command as command substitution. Fixes bug reported in Ubuntu - bug 779848 - - 5/12 - ---- -configure.in - - set the prefer_shared and prefer_static variables appropriately - depending on the value of $opt_static_link - -aclocal.m4 - - AC_LIB_LINKFLAGS_BODY: change to not prefer shared versions of the - libraries it's searching for if the prefer_shared variable is "no". - Fixes problem reported by Cedric Arbogast - - 5/13 - ---- -lib/readline/readline.c - - _rl_internal_teardown: add call to _rl_disable_meta_key to make the - meta key active only for the duration of the call to readline() - - _rl_internal_setup: move call to _rl_enable_meta_key here from - readline_initialize_everything so the meta key is active only for - the duration of the call to readline(). Suggestion from Miroslav - Lichvar - -builtins/help.def - - help_builtin: change strncmp to strcmp so that `help read' no longer - matches `readonly'. Suggested by Clark Wang - -config.h.in - - add define for GLIBC21, checked using jm_GLIBC21 as part of the tests - for libintl - -lib/malloc/malloc.c - - internal_free: don't use the cached value of memtop when deciding - whether or not to adjust the break and give memory back to the kernel - when using the GNU C library, since glibc uses sbrk for its own - internal purposes. From Debian bug 614815, reported by Samuel - Thibault - -aclocal.m4 - - BASH_STRUCT_WEXITSTATUS_OFFSET: change AC_RUN_IFELSE to AC_TRY_RUN - to avoid warning about not using AC_LANG_SOURCE - - 5/14 - ---- -bashline.[ch] - - two new functions, bashline_set_event_hook and bashline_reset_event_hook, - to set rl_event_hook to bash_event_hook and back to NULL, respectively - - don't set rl_event_hook unconditionally - -sig.c - - termsig_sighandler: if the shell is currently interactive and - readline is active, call bashline_set_event_hook to cause - termsig_handler to be called via bash_event_hook when the shell - returns from the signal handler - - 5/15 - ---- -lib/readline/display.c - - _rl_col_width: Mac OS X has a bug in wcwidth: it does not return 0 - for UTF-8 combining characters. Added workaround dependent on - MACOSX. Fixes problem pointed out by Thomas De Contes - - - 5/16 - ---- -lib/readline/rlmbutil.h - - WCWIDTH: wrapper for wcwidth that returns 0 for Unicode combining - characters on systems where wcwidth is broken (e.g., Mac OS X). - -lib/readline/{complete,display,mbutil}.c - - use WCWIDTH instead of wcwidth - - 5/17 - ---- -lib/readline/display.c - - update_line: after computing ofd and nfd, see whether the next - character in ofd is a zero-width combining character. If it is, - back ofd and nfd up one, so the base characters no longer compare - as equivalent. Fixes problem reported by Keith Winstein - - -lib/readline/nls.c - - _rl_utf8locale: new flag variable, set to non-zero if the current - locale is UTF-8 - - utf8locale(): new function, returns 1 if the passed lspec (or the - current locale) indicates that the locale is UTF-8. Called from - _rl_init_eightbit - -lib/readline/rlprivate.h - - extern declaration for _rl_utf8locale - -locale.c - - locale_utf8locale: new flag variable, set to non-zero if the current - locale is UTF-8 (currently unused) - - locale_isutf8(): new function, returns 1 if the passed lspec (or the - current locale) indicates that the locale is UTF-8. Should be called - whenever the locale or LC_CTYPE value is modified - -aclocal.m4 - - BASH_WCWIDTH_BROKEN: new test for whether or not wcwidth returns - zero-width characters like unicode combining characters as having - display length 1; define WCWIDTH_BROKEN in this case - -config.h.in - - WCWIDTH_BROKEN: new define - -lib/readline/rlmbutil.h - - change WCWIDTH macro to use _rl_utf8locale and the full range of - Unicode combining characters (U+0300-U+036F) - - 5/19 - ---- -lib/readline/rlprivate.h - - _rl_search_context: new member, prevc, will hold character read - prior to lastc - -lib/readline/isearch.c - - _rl_isearch_dispatch: if the character causes us to index into - another keymap, save that character in cxt->prevc - - _rl_isearch_dispatch: if we index into another keymap, but don't - find a function that's special to i-search, and the character that - caused us to index into that keymap would have terminated the - search, push back cxt->prevc and cxt->lastc to make it appear as - if `prevc' terminated the search, and execute lastc as a command. - We have to push prevc back so we index into the same keymap before - we read lastc. Fixes bug report from Davor Cubranic - - - 5/20 - ---- -expr.c - - expr_bind_variable: pay attention to the return value from - bind_variable and check whether or not we should error out due to - a readonly or noassign variable. Fixes bug reported by Eric - Blake - - 5/26 - ---- - -lib/readline/search.c - - include histlib.h for ANCHORED_SEARCH defines - - rl_history_search_flags: new variable, holds ANCHORED_SEARCH flag for - the duration of a history search - - rl_history_search_reinit: takes a new flags variable, defines whether - or not the search is anchored; assigned to rl_history_search_flags - - rl_history_serarch_reinit: if ANCHORED_SEARCH flag passed, add ^ to - beginning of search string; otherwise search string is unmodified - - rl_history_search_internal: set rl_point appropriately based on - whether or not rl_history_search_flags includes ANCHORED_SEARCH - - rl_history_substr_search_forward: new function, for non-anchored - substring search forward through history for string of characters - preceding rl_point - - rl_history_substr_search_backward: new function, for non-anchored - substring search backward through history for string of characters - preceding rl_point. Original code from Niraj Kulkarni - - -lib/readline/readline.h - - extern declarations for rl_history_substr_search_{for,back}ward - -lib/readline/funmap.c - - history-substring-search-forward: new bindable command, invokes - rl_history_substr_search_forward - - history-substring-search-backward: new bindable command, invokes - rl_history_substr_search_backward - -lib/readline/doc/{rluser.texi,readline.3} - - document history-substring-search-forward and - history-substring-search-backward - - 5/27 - ---- -{nojobs,jobs}.c - - add support for DONT_REPORT_SIGTERM so that the shell doesn't print - a message when a job exits due to SIGTERM since that's the default - signal sent by the kill builtin. Suggested by Marc Herbert - - -config-top.h - - DONT_REPORT_SIGTERM: new user-modifiable setting. Commented out - by default - - 5/28 - ---- -lib/readline/bind.c - - _rl_skip_to_delim: skip to a closing double quote or other delimiter, - allowing backslash to quote any character, including the delimiter - - rl_parse_and_bind: call _rl_skip_to_delim instead of using inline - code - - rl_parse_and_bind: allow quoted strings as the values of string - variables. Variable values without double quotes have trailing - whitespace removed (which still allows embedded whitespace, for - better or worse). Fixes problem with string variables not matching - in `set' command if values happen to have trailing spaces or tabs - (debian bash bug #602762), but introduces slight incompatibility. - - 5/29 - ---- -doc/{bash.1,bashref.texi} - - clarify unset description to specify that without options, a - variable, then a shell function if there is no variable by that - name, is unset. Fixes discrepancy reported by Mu Qiao - - - 6/4 - ---- -doc/{bash.1,bashref.texi} - - clarify description of LINES and COLUMNS (and checkwinsize shopt - option) to make it clear that only interactive shells set a - handler for SIGWINCH and update LINES and COLUMNS. Original - report submitted by Jonathan Nieder - -arrayfunc.c - - expand_compound_array_assignment: defer expansion of words between - parens when performing compound assignmnt to an associative array - variable - - assign_compound_array_list: perform the same expansions when doing - a compound array assignment to an associative array variable as - when doing a straight array index assignment. The idea is that - foo=( [ind1]=bar [ind2]=quux) - is the same as - foo[ind1]=bar ; foo[ind2]=quux - - This fixes problems with double-expansion and quote removal being - performed on the array indices - - 6/13 - ---- -doc/{bash.1,bashref.texi} - - Add a little text to make it clear that the locale determines how - range expressions in glob patterns are handled. - - - 6/21 - ---- -builtins/read.def - - display a message and return error status if -a is used with an - existing associative array. Fixes bug reported by Curtis Doty - - - 6/24 - ---- -{jobs,nojobs}.c - - non-interactive shells now react to the setting of checkwinsize - and set LINES and COLUMNS after a foreground job exits. From a - suggestion by Leslie Rhorer - -doc/{bash.1,bashref.texi} - - checkwinsize: remove language saying that only interactive shells - check the window size after each command - -lib/readline/histfile.c - - history_backupfile: new file, creates a backup history file name - given a filename (appending `-') - - history_do_write: when overwriting the history file, back it up - before writing. Restore backup file on a write error. Suggested - by chkno@chkno.net - -bashline.c - - find_cmd_name: two new arguments, return the start and end of the - actual text string used to find the command name, without taking - whitespace into account - - attempt_shell_completion: small changes to make sure that completion - attempted at the beginning of a non-empty line does not find a - programmable completion, even if the command name starts at point - - attempt_shell_completion: small change to make sure that completion - does not find a progcomp when in whitespace before the command - name - - attempt_shell_completion: small change to make sure that completion - does not find a progcomp when point is at the first character of a - command name, even when there is leading whitespace (similar to - above). Fixes problems noted by Ville Skytta - -subst.c - - brace_expand_word_list: since the individual strings in the strvec - returned by brace_expand are already allocated, don't copy them to - newly-allocated memory when building the WORD_LIST, just use them - intact - -locale.c - - locale_mb_cur_max: cache value of MB_CUR_MAX when we set or change - the locale to avoid a function call every time we need to read it - -shell.h - - new struct to save shell_input_line and associated variables: - shell_input_line_state_t - - add members of sh_parser_state_t to save and restore token and the - size of the token buffer - -parse.y - - {save,restore}_input_line_state: new functions to save and restore - shell_input_line and associated variables - - {save,restore}_parser_state: add code to save and restore the token - and token buffer size - - xparse_dolparen: call save_ and restore_input_line_state to avoid - problems with overwriting shell_input_line when we recursively - call the parser to parse a command substitution. Fixes bug - reported by Rui Santos - -include/shmbutil.h - - use locale_mb_cur_max instead of MB_CUR_MAX in ADVANCE_CHAR and - similar macros - -lib/glob/smatch.c - - rangecmp,rangecmp_wc: change to take an additional argument, which - forces the use of strcoll/wscoll when non-zero. If it's 0, a new - variable `glob_asciirange' controls whether or not we use strcoll/ - wscoll. If glob_asciirange is non-zero, we use straight - C-locale-like ordering. Suggested by Aharon Robbins - - - 6/30 - ---- -execute_cmd.c - - execute_pipeline: make sure the lastpipe code is protected by - #ifdef JOB_CONTROL. Fixes problem reported by Thomas Cort - - - 7/2 - --- -lib/readline/complete.c - - EXPERIMENTAL: remove setting of _rl_interrupt_immediately around - completion functions that touch the file system. Idea from Jan - Kratochvil and the GDB development - team - -lib/readline/signals.c - - rl_signal_handler: if we're in callback mode, don't interrupt - immediately on a SIGWINCH - - 7/3 - --- -bashline.c - - set_directory_hook: and its siblings are a new set of functions to - set, save, and restore the appropriate directory completion hook - - change callers to use {set,save,restore}_directory_hook instead of - manipulating rl_directory_rewrite_hook directly - - dircomplete_expand: new variable, defaults to 0, if non-zero causes - directory names to be word-expanded during word and filename - completion - - change {set,save,restore}_directory_hook to look at dircomplete_expand - and change rl_directory_completion_hook or rl_directory_rewrite_hook - appropriately - -bashline.h - - extern declaration for set_directory_hook so shopt code can use it - - 7/6 - --- -builtins/shopt.def - - globasciiranges: new settable shopt option, makes glob ranges act - as if in the C locale (so b no longer comes between A and B). - Suggested by Aharon Robbins - - 7/7 - --- -doc/{bash.1,bashref.texi} - - document new `globasciiranges' shopt option - - 7/8 - --- -builtins/shopt.def - - direxpand: new settable option, makes filename completion expand - variables in directory names like bash-4.1 did. - - shopt_set_complete_direxpand: new function, does the work for the - above by calling set_directory_hook - -doc/{bash.1,bashref.texi} - - document new `direxpand' shopt option - - 7/15 - ---- -lib/readline/isearch.c - - _rl_isearch_dispatch: when adding character to search string, use - cxt->lastc (which we use in the switch statement) instead of c, - since lastc can be modified earlier in the function - - 7/18 - ---- -lib/readline/rlprivate.h - - _rl_search_context: add another member to save previous value of - (multibyte) lastc: pmb is to mb as prevc is to lastc - -lib/readline/isearch.c: - - _rl_isearch_dispatch: if a key sequence indexes into a new keymap, - but doesn't find any bound function (k[ind].function == 0) or is - bound to self-insert (k[ind].function == rl_insert), back up and - insert the previous character (the one that caused the index into a - new keymap) and arrange things so the current character is the next - one read, so both of them end up in the search string. Fixes bug - reported by Clark Wang - - _rl_isearch_dispatch: a couple of efficiency improvements when adding - characters to the isearch string - - 7/24 - ---- -lib/readline/isearch.c - - _rl_isearch_dispatch: save and restore cxt->mb and cxt->pmb - appropriately when in a multibyte locale - -doc/{bash.1,bashref.texi} - - correct description of {x}>file (and other redirection operators - that allocate a file descriptor) to note the the fd range is - greater than or equal to 10. Fixes problem reported by - Christian Ullrich - -lib/readline/signals.c - - rl_signal_handler: don't interrupt immediately if in callback mode - -lib/readline/callback.c - - rl_callback_read_char: install signal handlers only when readline - has control in callback mode, so readline's signal handlers aren't - called when the application is active (e.g., between the calls to - rl_callback_handler_install and rl_callback_read_char). If the - readline signal handlers only set a flag, which the application - doesn't know about, the signals will effectively be ignored until - the next time the application calls into the readline callback - interface. Fixes problem of calling unsafe functions from signal - handlers when in callback mode reported by Jan Kratochvil - - -execute_cmd.c - - fix_assignment_words: when in Posix mode, the `command' builtin - doesn't change whether or not the command name it protects is an - assignment builtin. One or more instances of `command' - preceding `export', for instance, doesn't make `export' treat its - assignment statement arguments differently. Posix interpretation - #351 - -doc/{bash.1,bashref.texi} - - document new Posix-mode behavior of `command' when preceding builtins - that take assignment statements as arguments - -builtins/printf.def - - printstr: if fieldwidth or precision are < 0 or > INT_MAX when - supplied explicitly (since we take care of the `-' separately), - clamp at INT_MAX like when using getint(). Fixes issue reported - by Ralph Coredroy - - 7/25 - ---- -lib/readline/chardefs.h - - isxdigit: don't define if compiling with c++; declared as a c++ - template function. Fixes bug reported by Miroslav Lichvar - - -builtins/printf.def - - getint: if garglist == 0, return whatever getintmax returns (0). - Fixes bug reported by Ralph Coredroy - - 7/28 - ---- -doc/{bash.1,bashref.texi} - - minor changes to the descriptions of the cd and pushd builtins - -lib/sh/zread.c - - zsyncfd: change variable holding return value from lseek to - off_t. Bug report and fix from Gregory Margo - - 8/1 - --- -expr.c - - don't check for division by 0 when in a context where no evaluation - is taking place. Fixes bug reported by dnade.ext@orange-ftgroup.com - - 8/6 - --- -execute_cmd.c - - execute_command_internal: the parent branch of the subshell code - (where the child calls execute_in_subshell) should not close all - open FIFOs with unlink_fifo_list if it's part of a shell function - that's still executing. Fixes bug reported by Maarten Billemont - - - 8/9 - --- -builtins/common.c - - get_exitstat: return EX_BADUSAGE (2) on a non-numeric argument - -builtins/return.def - - return_builtin: just call get_exitstat to get the return status, - let it handle proper parsing and handling of arguments. Fixes - issue most recently raised by Linda Walsh . - Reverses change from 9/11/2008 (see above) - - 8/16 - ---- -doc/{bash.1,bashref.texi} - - clean up `set -e' language to make it clearer that any failure of - a compound command will cause the shell to exit, not just subshells - and brace commands - - 8/17 - ---- -configure.in - - make the various XXX_FOR_BUILD variables `precious' to autoconf to - avoid stale data - - change how CC_FOR_BUILD is initialized when cross-compiling and not, - but do not change behavior - - initialize CFLAGS_FOR_BUILD to -g when cross-compiling - - initialize LIBS_FOR_BUILD to $(LIBS) when not cross-compiling, empty - when cross-compiling - - create AUTO_CFLAGS variable to hold basic CFLAGS defaults; used when - CFLAGS not inherited from environment (like effect of old - auto_cflags variable) - - substitute LIBS_FOR_BUILD into output Makefiles - [changes inspired by bug report from Nathan Phillip Brink - -- gentoo bug 378941] - -builtins/Makefile.in - - substitute LIBS_FOR_BUILD from configure, not strictly initialized - to $(LIBS) - - 8/27 - ---- -doc/{bash.1,bashref.texi} - - minor changes to the here string description to clarify the - expansions performed on the word - -support/shobj-conf - - handle compilation on Lion (Mac OS X 10.7/darwin11) with changes - to darwin stanzas. Fixes readline bug reported by Vincent - Sheffer - -lib/sh/strtrans.c - - ansic_wshouldquote: check a string with multi-byte characters for - characters that needs to be backslash-octal escaped for $'...' - - ansic_shouldquote: if is_basic fails for one character, let - ansic_wshouldquote examine the rest of the string and return what - it returns. From a patch sent by Roman Rakus - - 8/30 - ---- -lib/sh/strtrans.c - - ansic_quote: changes to quote (or not) multibyte characters. New - code converts them to wide characters and uses iswprint to check - valid wide chars. From a patch sent by Roman Rakus - - - 9/7 - --- -lib/sh/shquote.c - - sh_backslash_quote: change to be table-driven so we can use a - different table if we want to - - sh_backslash_quote: takes a second char table[256] argument; - -externs.h - - sh_backslash_quote: add second argument to function prototype - -bashline.c,braces.c,parse.y,builtins/printf.def - - change callers of sh_backslash_quote to add second argument - -bashline.c - - filename_bstab: table of characters to pass to sh_backslash_quote; - characters with value 1 will be backslash-quoted - - set_filename_bstab: turn on characters in filename backslash-quote - table according to passed string argument - - call set_filename_bstab every time rl_filename_quote_characters is - assigned a value - - bash_quote_filename: call sh_backslash_quote with filename_bstab - as second argument. This allows other characters in filenames to - be quoted without quoting, for instance, a dollar sign in a shell - variable reference - - 9/8 - --- -bashline.c - - complete_fullquote: new variable, controls table passed to - sh_backslash_quote. If non-zero (the default), the standard set - of shell metacharacters -- as in bash versions up to and including - bash-4.2 -- gets backslash-quoted by the completion code. If zero, - sh_backslash_quote gets the table with the characters in the - variable reference removed, which means they are removed from the - set of characters to be quoted in filenames - - 9/10 - ---- -bashline.c - - bash_filename_stat_hook: new function, designed to expand variable - references in filenames before readline passes them to stat(2) - to determine whether or not they are a directory - - 9/15 - ---- -builtins/declare.def - - if assign_array_element fails due to a bad (or empty) subscript, mark - it as an assignment error and don't attempt any further processing - of that declaration. Fixes segfault bug reported by Diego Augusto - Molina - - 9/19 - ---- -expr.c - - exppower: replace the simple exponentiation algorithm with an - implementation of exponentiation by squaring. Inspired by report - from Nicolas ARGYROU - -bashline.c - - bash_quote_filename: check for rtext being non-null before - dereferencing it - - set_saved_history: operate_and_get_next assumes that the previous - line was added to the history, even when the history is stifled and - at the max number of entries. If it wasn't, make sure the history - number is incremented properly. Partial fix for bug reported by - gregrwm - -doc/{bash.1,bashref.texi},lib/readline/doc/{hsuser,rluser}.texi - - minor editorial changes inspired by suggestions from - Roger Zauner - - 9/20 - ---- -lib/intl/localealias.c - - read_alias_file: close resource leak (fp) when returning on error - - 9/22 - ---- -execute_command.c - - execute_intern_function: implement Posix interpretation 383 by making - it an error to define a function with the same name as a special - builtin when in Posix mode. - http://austingroupbugs.net/view.php?id=383#c692 - - 9/25 - ---- -doc/{bash.1,bashref.texi} - - formatting and some content changes from Benno Schulenberg - - - document new posix-mode behavior from interp 383 change of 9/22 - - 9/30 - ---- -execute_cmd.c - - shell_execve: add strerror to error message about executable file - that shell can't execute as a shell script. From suggestion by - daysleeper - - 10/1 - ---- -bashhist.c - - maybe_add_history: act as if literal_history is set when parser_state - includes PST_HEREDOC, so we save the bodies of here-documents just - as they were entered. Fixes bug reported by Jonathan Wakely - - - bash_add_history: make sure that the second and subsequent lines of - a here document don't have extra newlines or other delimiting - chars added, since they have the trailing newline preserved, when - `lithist' is set and history_delimiting_chars isn't called - -execute_cmd.c - - execute_command_internal: avoid fd exhaustion caused by using - process substitution in loops inside shell functions by using - copy_fifo_list and close_new_fifos (). Fixes debian bash bug - 642504 - -lib/readline/complete.c - - new variable, rl_filename_stat_hook, used by append_to_match. If - filename completion is desired, and rl_filename_stat_hook points - to a function, call that function to expand the filename in an - application-specific way before calling stat. - -bashline.c - - bash_default_completion: if variable completion returns a single - match, use bash_filename_stat_hook and file_isdir to determine - whether or not the variable name expands to a directory. If it - does, set the filename_append_character to `/'. This is not - perfect, so we will see how it works out. Adds functionality - requested by Peter Toft and Patrick Pfeifer - - - rl_filename_stat_hook: assigned bash_filename_stat_hook, so things - like $HOME/Downloads (after completion) have a slash appended. - In general, this causes the stat hook to be called whenever - filename completion is appended. Adds functionality requested by - Patrick Pfeifer - -lib/readline/readline.h - - new extern declaration for rl_filename_stat_hook - -lib/readline/doc/rltech.texi - - rl_directory_rewrite_hook: now documented - - rl_filename_stat_hook: document - -pcomplete.c - - gen_action_completions: in the CA_DIRECTORY case, turn off - rl_filename_completion_desired if it was off before we called - rl_filename_completion_function and we didn't get any matches. - Having it on causes readline to quote the matches as if they - were filenames. Adds functionality requested by many, - including Clark Wang - -assoc.[ch] - - assoc_replace: new function, takes the same arguments as - assoc_insert, but returns the old data instead of freeing it - - assoc_insert: if the object returned by hash_insert doesn't have - the same value for its key as the key passed as an argument, we - are overwriting an existing value. In this case, we can free the - key. Fixes bug reported by David Parks - - 10/5 - ---- -print_cmd.c - - indirection_level_string: small change to only re-enable `x' - option after calling decode_prompt_string if it was on before. In - normal mode, it will be, but John Reiser - has a novel use for that code in conjunction with a pre-loaded - shared library that traces system call usage in shell scripts - - 10/10 - ----- -Makefile.in - - Fix from Mike Frysinger to avoid trying to - build y.tab.c and y.tab.h with two separate runs of yacc if - parse.y changes. Problem with parallel makes - - Fix from Mike Frysinger to avoid subdirectory - builds each trying to make version.h (and all its dependencies) - -lib/sh/Makefile.in - - remove some dependencies on version.h where it doesn't make sense - -variables.c - - initialize_shell_variables: while reading the environment, a shell - running in posix mode now checks for SHELLOPTS being readonly (it - gets set early on in main()) before trying to assign to it. It - saves an error message and the variable gets parsed as it should. - Fixes bug reported by Len Giambrone - - 10/14 - ----- -doc/{bash.1,bashref.texi} - - add to the "duplicating file descriptors" description that >&word - doesn't redirect stdout and stderr if word expands to `-' - - add to the "appending standard output and standard error" - description a note that >&word, where word is a number or `-', - causes other redirection operators to apply for sh and Posix - compatibility reasons. Suggested by Greg Wooledge - - - 10/15 - ----- -pcomplete.c - - change pcomp_filename_completion_function to only run the filename - dequoting function in the cases (as best as it can figure) where - readline won't do it via rl_filename_completion_function. Based - on reports from - - 10/19 - ----- -bashline.c - - attempt_shell_completion: add call to set_directory_hook() to make - sure the rewrite functions are correct. It's cheap and doesn't - hurt - - command_word_completion_function: if completing a command name that - starts with `.' or `..', temporarily suppress the effects of the - `direxpand' option and restore the correct value after calling - rl_filename_completion_function. If it's enabled, the directory - name will be rewritten and no longer match `./' or `../'. Fixes - problem reported by Michael Kalisz - - 10/22 - ----- -builtins/history.def - - push_history: make sure remember_on_history is enabled before we - try to delete the last history entry -- the `history -s' command - might not have been saved. Fixes bug reported by - lester@vmw-les.eng.vmware.com - -lib/readline/complete.c - - rl_callback_read_char: add calls to a macro CALLBACK_READ_RETURN - instead of straight return; add same call at end of function. - Placeholder for future work in deinstalling signal handlers when - readline is not active - - 10/25 - ----- -expr.c - - exp2: catch arithmetic overflow when val1 == INTMAX_MIN and val2 == -1 - for DIV and MOD and avoid SIGFPE. Bug report and pointer to fix - from Jaak Ristioja - - expassign: same changes for arithmetic overflow for DIV and MOD - - 10/28 - ----- -subst.c - - parameter_brace_expand: allow pattern substitution when there is an - expansion of the form ${var/} as a no-op: replacing nothing with - nothing - - parameter_brace_patsub: don't need to check for PATSUB being NULL; - it never is - -flags.c - - if STRICT_POSIX is defined, initialize history_expansion to 0, since - history expansion (and its treatment of ! within double quotes) is - not a conforming posix environment. From austin-group issue 500 - -lib/readline/histexpand.c - - history_expand: when processing a string within double quotes - (DQUOTE == 1), make the closing double quote inhibit history - expansion, as if the word were outside double quotes. In effect, - we assume that the double quote is followed by a character in - history_no_expand_chars. tcsh and csh seem to do this. This - answers a persistent complaint about history expansion - - 10/29 - ----- -make_cmd.c - - make_arith_for_command: use skip_to_delim to find the next `;' - when breaking the string between the double parens into three - separate components instead of a simple character loop. Fixes - bug reported by Dan Douglas - - 11/2 - ---- -Makefile.in - - make libbuiltins.a depend on builtext.h to serialize its creation - and avoid conflict between multiple invocations of mkbuiltins. - Fix from Mike Frysinger - - 11/5 - ---- -findcmd.c - - user_command_matches: if stat(".", ...) returns -1, set st_dev - and st_ino fields in dotinfo to 0 to avoid same_file matches - - find_user_command_in_path: check stat(2) return the same way - -lib/glob/glob.c - - glob_vector: don't call strlen(pat) without checking pat == 0 - - glob_dir_to_array: make sure to free `result' and all allocated - members before returning error due to malloc failure - - glob_vector: make sure to free `nextname' and `npat' on errors - (mostly when setting lose = 1) - - glob_vector: if flags & GX_MATCHDIRS but not GX_ALLDIRS, make - sure we free `subdir' - - glob_filename: when expanding ** (GX_ALLDIRS), make sure we - free temp_results (return value from glob_vector) - -lib/glob/xmbsrtowcs.c - - xdupmbstowcs: fix call to realloc to use sizeof (char *) instead - of sizeof (char **) when assigning idxtmp - -execute_cmd.c - - print_index_and_element: return 0 right away if L == 0 - - is_dirname: fix memory leak by freeing `temp' - - time_command: don't try to deref NULL `command' when assigning - to `posix_time' - - shell_execve: null-terminate `sample' after READ_SAMPLE_BUF so it's - terminated for functions that expect that - -builtins/read.def - - read_builtin: don't call bind_read_variable with a potentially-null - string - -pcomplete.c - - gen_command_matches: don't call dispose_word_desc with a NULL arg - - gen_compspec_completions: fix memory leak by freeing `ret' before - calling gen_action_completions (tcs, ...). happens when - performing directory completion as default and no completions - have been generated - - gen_progcomp_completions: make sure to set foundp to 0 whenever - returning NULL - - it_init_aliases: fix memory leak by freeing alias_list before - returning - -bashline.c - - command_word_completion_function: don't call restore_tilde with a - NULL directory_part argument - - bash_directory_expansion: bugfix: don't throw away results of - rl_directory_rewrite_hook if it's set and returns non-zero - - bind_keyseq_to_unix_command: free `kseq' before returning error - -arrayfunc.c - - assign_array_element_internal: make sure `akey' is freed if non-null - before returning error - - assign_compound_array_list: free `akey' before returning error - - array_value_internal: free `akey' before returning error - - unbind_array_element: free `akey' before returning error - -subst.c - - array_length_reference: free `akey' before returning error in case - of expand_assignment_string_to_string error - - array_length_reference: free `akey' after call to assoc_reference - - skip_to_delim: if skipping process and command substitution, free - return value from extract_process_subst - - parameter_brace_substring: free `val' (vtype == VT_VARIABLE) before - returning if verify_substring_values fails - - parameter_brace_expand: remove two duplicate lines that allocate - ret in parameter_brace_substring case - - parameter_brace_expand: convert `free (name); name = xmalloc (...)' - to use `xrealloc (name, ...)' - - parameter_brace_expand: free `name' before returning when handling - ${!PREFIX*} expansion - - split_at_delims: fix memory leak by freeing `d2' before returning - -redir.c - - redirection_error: free `filename' if the redirection operator is - REDIR_VARASSIGN by assigning allocname - -eval.c - - send_pwd_to_eterm: fix memory leak by freeing value returned by - get_working_directory() - -builtins/cd.def - - change_to_directory: fix memory leak by freeing return value from - resetpwd() - - cd_builtin: fix memory leak by freeing value returned by dirspell() - - cd_builtin: fix memory leak by freeing `directory' if appropriate - before overwriting with return value from resetpwd() - -builtins/type.def - - describe_command: free `full_path' before overwriting it with return - value from sh_makepath - -builtins/complete.def - - compgen_builtin: fix memory leak by calling strlist_dispose (sl) - before overwriting sl with return value from completions_to_stringlist - -builtins/hash.def - - list_hashed_filename_targets: fix memory leak by freeing `target' - -make_cmd.c - - make_arith_for_command: free `init', `test', and `step' before - returning error on parse error - -jobs.c - - initialize_job_control: don't call move_to_high_fd if shell_tty == -1 - -general.c - - check_dev_tty: don't call close with an fd < 0 - - legal_number: deal with NULL `string' argument, return invalid - -lib/sh/fmtulong.c - - fmtulong: if the `base' argument is invalid, make sure we index - buf by `len-1' at maximum - -print_cmd.c - - print_deferred_heredocs: don't try to dereference a NULL `cstring' - - cprintf: make sure to call va_end (args) - -variables.c - - push_dollar_vars: fix call to xrealloc to use sizeof (WORD_LIST *) - instead of sizeof (WORD_LIST **) - -lib/sh/zmapfd.c - - zmapfd: if read returns error, free result and return -1 immediately - instead of trying to reallocate it - - 11/6 - ---- -execute_cmd.c - - cpl_reap: rewrote to avoid using pointer after freeing it; now builds - new coproc list on the fly while traversing the old one and sets the - right values for coproc_list when done - - 11/12 - ----- -builtins/set.def - - if neither -f nor -v supplied, don't allow a readonly function to - be implicitly unset. Fixes bug reported by Jens Schmidt - - -lib/readline/callback.c - - change CALLBACK_READ_RETURN to clear signal handlers before returning - from rl_callback_read_char so readline's signal handlers aren't - installed when readline doesn't have control. Idea from Jan - Kratochvil and the GDB development - team - -pcomplete.h - - COPT_NOQUOTE: new complete/compgen option value - -builtins/complete.def - - noquote: new complete/compgen option; will be used to disable - filename completion quoting - -pcomplete.c - - pcomp_set_readline_variables: pay attention to COPT_NOQUOTE; turns - of rl_filename_quoting_desired if set; turns it on if unset (value - is inverted, since default is on) - -doc/bash.1,lib/readline/doc/rluser.texi - - document new -o noquote option to complete/compgen/compopt - -pathexp.c - - quote_string_for_globbing: if QGLOB_REGEXP, make sure characters - between brackets in an ERE bracket expression are not inappropriately - quoted with backslashes. This is a pretty substantial change, - should be stressed when opening bash up for alpha and beta tests. - Fixes bug pointed out by Stephane Chazleas - - -doc/{bash.1,bashref.texi} - - document that regexp matches can be inconsistent when quoting - characters in bracket expressions, since usual quoting characters - lose their meaning within brackets - - note that regular expression matching when the pattern is stored - in a shell variable which is quoted for expansion causes string - matching - -redir.h - - RX_SAVEFD: new flag value; notes that a redirection denotes an - fd used to save another even if it's not >= SHELL_FD_BASE - -redir.c - - do_redirection_internal: when deciding whether or not to reset the - close-on-exec flag on a restored file descriptor, trust the value - of redirect->flags & RX_SAVCLEXEC even if the fd is < SHELL_FD_BASE - if the RX_SAVEFD flag is set - - add_undo_redirect: set the RX_SAVEFD flag if the file descriptor - limit is such that the shell can't duplicate to a file descriptor - >= 10. Fixes a limitation that tripped a coreutils test reported - by Paul Eggert - - 11/19 - ----- -doc/{bash.1,bashref.texi},lib/readline/doc/hsuser.texi - - make it clear that bash runs HISTFILESIZE=$HISTSIZE after reading - the startup files - - make it clear that bash runs HISTSIZE=500 after reading the - startup files - - make it clear that setting HISTSIZE=0 causes commands to not be - saved in the history list - - make it clear that setting HISTFILESIZE=0 causes the history file - to be truncated to zero size - -variables.c - - sv_histsize: change so setting HISTSIZE to a value less than 0 - causes the history to be `unstifled' - - sv_histsize: change so setting HISTFILESIZE to a value less than 0 - results in no file truncation - - make it clear that numeric values less than 0 for HISTFILESIZE or - HISTSIZE inhibit the usual functions - - 11/23 - ----- -parse.y - - save_input_line_state: add missing `return ls' at the end, since the - function is supposed to return its argument. Pointed out by - Andreas Schwab - -builtins/read.def - - skip over NUL bytes in input, as most modern shells seem to. Bug - report by Matthew Story - -lib/readline/vi_mode.c - - rl_vi_replace: set _rl_vi_last_key_before_insert to invoking key - - 11/25 - ----- -builtins/read.def - - read_builtin: if xrealloc returns same pointer as first argument, - don't bother with the remove_unwind_protect/add_unwind_protect pair - - read_builtin: set a flag (`reading') around calls to zread/zreadc - and readline() - - sigalrm: change to set flag (`sigalrm_seen') and only longjmp if - currently in read(2) (reading != 0) - - CHECK_ALRM: new macro, checks sigalrm_seen and longjmps if non-zero, - behavior of old SIGALRM catching function - - read_builtin: call CHECK_ALRM in appropriate places while reading - line of input. Fixes bug reported by Pierre Gaston - - -lib/readline/vi_mode.c - - rl_vi_replace: initialize characters before printing characters in - vi_replace_keymap to their default values in vi_insertion_keymap, - since we're supposed to be in insert mode replacing characters - - rl_vi_replace: call rl_vi_start_inserting to set last command to - `R' for undo - - rl_vi_replace: set _rl_vi_last_key_before_insert to `R' for future - use by _rl_vi_done_inserting - - vi_save_insert_buffer: new function, broke out code that copies text - into vi_insert_buffer from _rl_vi_save_insert - - _rl_vi_save_replace: new function, saves text modified by - rl_vi_replace (using current point and vi_replace_count to figure - it out) to vi_replace_buffer - - _rl_vi_save_insert: call vi_save_insert_buffer - - _rl_vi_done_inserting: if _rl_vi_last_key_before_insert == 'R', call - _rl_vi_save_replace to save text modified in replace mode (uses - vi_save_insert_buffer) - - _rl_vi_replace_insert: new function, replaces the number of chars - in vi_insert_buffer after rl_point with contents ov vi_insert_buffer - - rl_vi_redo: call _rl_vi_replace_insert if last command == 'R' and - there's something in vi_insert_buffer. Fixes bug with `.' not - redoing the most recent `R' command, reported by Geoff Clare - in readline area on savannah - - 11/26 - ----- -lib/readline/rlprivate.h - - RL_SIG_RECEIVED(): evaluate to non-zero if there is a pending signal - to be handled - - RL_SIGINT_RECEIVED(): evaluate to non-zero if there is a pending - SIGINT to be handled - -lib/readline/complete.c - - remove all mention of _rl_interrupt_immediately - - rl_completion_matches: check RL_SIG_RECEIVED after each call to - the entry function, call RL_CHECK_SIGNALS if true to handle the - signal - - rl_completion_matches: if RL_SIG_RECEIVED evaluates to true, free - and zero out the match_list this function allocated - - rl_completion_matches: if the completion entry function is - rl_filename_completion_function, free the contents of match_list, - because that function does not keep state and will not free the - entries; avoids possible memory leak pointed out by - Garrett Cooper - - gen_completion_matches: if RL_SIG_RECEIVED evalutes to true after - calling rl_attempted_completion_function, free the returned match - list and handle the signal with RL_CHECK_SIGNALS; avoids - possible memory leak pointed out by Garrett Cooper - - - gen_completion_matches: if RL_SIG_RECEIVED evaluates to true after - calling rl_completion_matches, free the returned match list and - handle the signal with RL_CHECK_SIGNALS - -lib/readline/util.c - - rl_settracefp: new utility function to set the tracing FILE * - -lib/readline/signals.c - - _rl_sigcleanup: pointer to a function that will be called with the - signal and a void * argument from _rl_handle_signal - - _rl_sigcleanarg: void * that the rest of the code can set to have - passed to the signal cleanup function - - _rl_handle_signal: if _rl_sigcleanup set, call as - (*_rl_sigcleanup) (sig, _rl_sigcleanarg) - -lib/readline/rlprivate.h - - extern declarations for _rl_sigcleanup and _rl_sigcleanarg - -lib/readline/complete.c - - _rl_complete_sigcleanup: signal cleanup function for completion code; - calls _rl_free_match_list on _rl_sigcleanarg if signal == SIGINT - - rl_complete_internal: before calling display_matches if what_to_do - == `?', set _rl_sigcleanup to _rl_complete_sigcleanup so the match - list gets freed on SIGINT; avoids possible memory leak pointed out - by Garrett Cooper - - rl_complete_internal: in default switch case, call _rl_free_match_list - before returning to avoid memory leak - -doc/bashref.texi - - start at a set of examples for the =~ regular expression matching - operator, touching on keeping the pattern in a shell variable and - quoting portions of the pattern to remove their special meaning - - 12/1 - ---- -lib/glob/gmisc.c - - extglob_pattern: new function, returns 1 if pattern passed as an - argument looks like an extended globbing pattern - -lib/glob/glob.c - - skipname: return 0 immediately if extglob_pattern returns non-zero, - let the extended globbing code do the right thing with skipping - names beginning with a `.' - - mbskipname: return 0 immediately if extglob_pattern returns non-zero, - let the extended globbing code do the right thing with skipping - names beginning with a `.'. Fixes bug reported by Yongzhi Pan - - - 12/2 - ---- -lib/glob/smatch.c - - patscan, patscan_wc: no longer static so other parts of the glob - library can use them, renamed to glob_patscan, glob_patscan_wc - -lib/glob/glob.c - - extern declarations for glob_patscan, glob_patscan_wc - - wchkname: new function, does skipname on wchar_t pattern and dname, - old body of mbskipname after converting to wide chars - - extglob_skipname: new function, checks all subpatterns in an extglob - pattern to determine whether or not a filename should be skipped. - Calls skipname for each subpattern. Dname is only skipped if all - subpatterns indicate it should be. Better fix for bug reported by - Yongzhi Pan - - wextglob_skipname: wide-char version of extglob_skipname, calls - wchkname instead of calling back into mbskipname for each - subpattern to avoid problems with char/wchar_t mismatch - - skipname: call extglob_skipname if extglob_pattern returns non-zero - - mbskipname: call wextglob_skipname if extglob_pattern returns non-zero - - mbskipname: short-circuit immediately if no multibyte chars in - pattern or filename - -execute_cmd.c - - execute_cond_node: added parens to patmatch assignment statement to - make intent clearer - - 12/3 - ---- -configure.in,config.h.in - - check for imaxdiv, define HAVE_IMAXDIV if present - -expr.c - - expassign, exp2: use imaxdiv if available. Doesn't help with checks - for overflow from 10/25 - - 12/6 - ---- -lib/readline/complete.c - - compute_lcd_of_matches: if we're ignoring case in the matches, only - use what the user typed as the lcd if it matches the first match - (after sorting) up to the length of what was typed (if what the - user typed is longer than the shortest of the possible matches, use - the shortest common length of the matches instead). If it doesn't - match, use the first of the list of matches, as if case were not - being ignored. Fixes bug reported by Clark Wang - - - 12/7 - ---- -builtins/cd.def - - cd_builtin: add code to return error in case cd has more than one - non-option argument, conditional on CD_COMPLAINS define (which is - not defined anywhere) - -doc/{bash.1,bashref.texi} - - note that additional arguments to cd following the directory name - are ignored. Suggested by Vaclav Hanzl - - 12/10 - ----- -lib/readline/input.c - - rl_read_key: don't need to increment key sequence length here; doing - it leads to an off-by-one error - -lib/readline/macro.c - - rl_end_kbd_macro: after off-by-one error with rl_key_sequence_length - fixed, can decrement current_macro_index by rl_key_sequence_length - (length of key sequence that closes keyboard macro) - -lib/readline/readline.c - - _rl_dispatch_subseq: fix extra increment of rl_key_sequence_length - when ESC maps to a new keymap and we're converting meta characters - to ESC+key - - _rl_dispatch_subseq: better increment of rl_key_sequence_length - before we dispatch to a function in the ISFUNC case (where the - second increment above should have happened) - - rl_executing_keyseq: the full key sequence that ended up executing - a readline command. Available to the calling application, maintained - by _rl_dispatch_subseq, indexed by rl_key_sequence_length - - rl_executing_key: the key that was bound to the currently-executing - readline command. Same as the `key' argument to the function - -lib/readline/readline.h - - rl_executing_keyseq: extern declaration - - rl_executing_key: extern declaration - - rl_key_sequence_length: declaration moved here from rlprivate.h, - now part of public interface - -lib/readline/rlprivate.h - - new extern declaration for _rl_executing_keyseq_size, buffer size - for rl_executing_keyseq - -lib/readline/doc/rltech.texi - - documented new variables: rl_executing_key, rl_executing_keyseq, - rl_key_sequence_length - - 12/13 - ----- -bashline.c - - bash_execute_unix_command: replace ad-hoc code that searches - cmd_xmap for correct command with call to rl_function_of_keyseq - using rl_executing_keyseq; now supports key sequences longer - than two characters. Fixes bug reported by Michael Kazior - - - 12/15 - ----- -make_cmd.c - - make_function_def: don't null out source_file before calling - make_command so it can be used later on when the function definition - is executed - -execute_cmd.c - - execute_intern_function: second argument is now FUNCTION_DEF * - instead of COMMAND * - - execute_command_internal: call execute_intern_function with the - new second argument (the entire FUNCTION_DEF instead of just the - command member) - - execute_intern_function: if DEBUGGER is defined, call - bind_function_def before calling bind_function, just like - make_function_def does (might be able to take out the call in - make_function_def depending on what the debugger does with it). - Fixes bug reported by - -expr.c - - more minor changes to cases of INTMAX_MIN % -1 and INTMAX_MIN / 1; - fix typos and logic errors - - 12/16 - ----- -bashline.c - - find_cmd_start: change flags to remove SD_NOSKIPCMD so it skips over - command substitutions and doesn't treat them as command separators - - attempt_shell_completion: instead of taking first return from - find_cmd_name as command name to use for programmable completion, - use loop to skip over assignment statements. Fixes problem reported - by Raphael Droz - - attempt_shell_completion: if we don't find a command name but the - command line is non-empty, assume the other words are all assignment - statements and flag that point is in a command position so we can - do command name completion - - attempt_shell_completion: if the word being completed is the first - word following a series of assignment statements, and the - command line is non-empty, flag that point is in a command position - so we can do command name completion - -lib/readline/history.c - - history_get_time: atol -> strtol - - 12/18 - ----- -parse.y - - parser_in_command_position: external interface to the - command_token_position macro for use by other parts of the shell, - like the completion mechanism - -externs.h - - extern declaration for parser_in_command_position - - 12/19 - ----- - -builtins/read.def - - read_builtin: make sure all calls to bind_read_variable are passed - a non-null string. Fixes bug reported by Dan Douglas - - -bashline.c - - attempt_shell_completion: mark that we're in a command position if - we're at the start of the line and the parser is ready to accept - a reserved word or command name. Feature most recently suggested - by Peng Yu - - 12/21 - ----- -lib/readline/bind.c - - _rl_escchar: return the character that would be backslash-escaped - to denote the control character passed as an argument ('\n' -> 'n') - - _rl_isescape: return 1 if character passed is one that has a - backslash escape - - _rl_untranslate_macro_value: new second argument: use_escapes, if - non-zero translate to backslash escapes where possible instead of - using straight \C-x for control character `x'. Change callers - - _rl_untranslate_macro_value: now global - -lib/readline/rlprivate.h - - _rl_untranslate_macro_value: extern declaration - -lib/readline/{macro.c,readline.h} - - rl_print_last_kbd_macro: new bindable function, inspired by patch - from Mitchel Humpherys - -lib/readline/funmap.c - - print-last-kbd-macro: new bindable command, bound to - rl_print_last_kbd_macro - -lib/readline/doc/{rluser.texi,readline.3},doc/bash.1 - - print-last-kbd-macro: document. - -lib/readline/text.c - - _rl_insert_next: if we're defining a macro, make sure the key gets - added to the macro text (should really audit calls to rl_read_key() - and make sure the right thing is happening for all of them) - -bashline.[ch] - - print_unix_command_map: new function, prints all bound commands in - cmd_xmap using rl_macro_dumper in a reusable format - -builtins/bind.def - - new -X option: print all keysequences bound to Unix commands using - print_unix_command_map. Feature suggested by Dennis Williamson - (2/2011) - -doc/{bash.1,bashref.texi} - - document new `bind -X' option - - 12/24 - ----- - -doc/{bash.1,bashref.texi} - - add a couple of sentences to the description of the case modification - operators making it clearer that each character of parameter is - tested against the pattern, and that the pattern should only attempt - to match a single character. Suggested by Bill Gradwohl - - - 12/28 - ----- -shell.c - - init_noninteractive: instead of calling set_job_control(0) to - unconditionally turn off job control, turn on job control if - forced_interactive or jobs_m_flag is set - - shell_initialize: call initialize_job_control with jobs_m_flag as - argument so `bash -m script' enables job control while running the - script - -jobs.c - - initialize_job_control: if the `force' argument is non-zero, turn on - job control even if the shell is not currently interactive - (interactive == 0) - - 12/29 - ----- - -flags.h - - new extern declaration for jobs_m_flag - -builtins/{cd,set}.def,doc/{bash.1,bashref.texi} - - added text clarifying the descriptions of cd -L and -P, suggested by - Padraig Brady - - slight change to the description of `set -P' about resolving symbolic - links - -lib/readline/doc/rluser.texi - - Added an example to the programmable completion section: _comp_cd, - a completion function for cd, with additional verbiage. Text - includes a reference to the bash_completion project - - 1/1/2012 - -------- -jobs.c - - set_job_status_and_cleanup: note that a job is stopped due to - SIGTSTP (any_tstped) if job_control is set; there's no need to - test interactive - - 1/5 - --- -quit.h - - LASTSIG(): new macro, expands to signal number of last terminating - signal received (terminating_signal or SIGINT) - -trap.c - - first_pending_trap: returns lowest signal number with a trap pending - - trapped_signal_received: set to the last trapped signal the shell - received in trap_handler(); reset to 0 in run_pending_traps - -builtins/read.def - - read_builtin: changes to posix-mode (posixly_correct != 0) to make - `read' interruptible by a trapped signal. After the trap runs, - read returns 128+sig and does not assign the partially-read line - to the named variable(s). From an austin-group discussion started - by David Korn - - 1/11 - ---- -doc/{bash.1,bashref.texi} - - slight changes to the descriptions of the compat32 and compat40 shell - options to clarify their meaning - - 1/12 - ---- -lib/readline/{colors.[ch],parse-colors.[ch]} - - new files, part of color infrastructure support - -Makefile.in,lib/readline/Makefile.in - - arrange to have colors.o and parse-colors.o added to readline - library - -{configure,config.h}.in - - check for stdbool.h, define HAVE_STDBOOL_H if found - - 1/14 - ---- -lib/readline/bind.c - - colored_stats: new bindable variable, enables using colors to - indicate file type when listing completions - -lib/readline/complete.c - - _rl_colored_stats: new variable, controlled by colored-stats bindable - variable - - colored_stat_start, colored_stat_end: new functions to set and reset - the terminal color appropriately depending on the type of the - filename to be printed - - print_filename: changes to print colors if `colored-stats' variable - set. Changes contributed by Raphael Droz - - -lib/readline/readline.c - - rl_initialize_everything: add call to _rl_parse_colors to parse - color values out of $LS_COLORS. May have to add to rl_initialize - to make more dynamic if LS_COLORS changes (which doesn't happen - very often, if at all) - -lib/readline/rlprivate.h - - _rl_colored_stats: new extern declaration - -lib/readline/doc/{readline.3,rluser.texi},doc/bash.1 - - colored-stats: document new bindable readline variable - -lib/readline/colors.c - - _rl_print_color_indicator: call rl_filename_stat_hook before calling - lstat/stat so we can get color indicators for stuff like - $HOME/Applications - -lib/readline/complete.c - - stat_char: call rl_filename_stat_hook before calling lstat/stat - -findcmd.[ch],execute_cmd.c - - search_for_command: now takes a second `flags' argument; changed - header function prototype and callers - - search_for_command: if (flags & 1), put the command found in $PATH - into the command hash table (previous default behavior) - -execute_cmd.c - - is_dirname: call search_for_command with flags argument of 0 so it - doesn't try to put something in the command hash table - -bashline.c - - bash_command_name_stat_hook: a hook function for readline's - filename_stat_hook that does $PATH searching the same way that - execute_cmd.c:execute_disk_command() does it, and rewrites the - passed filename if found. Does not put names into command hash - table. This allows command name completion to take advantage - of `visible-stats' and `colored-stats' settings. - - executable_completion: new function, calls the directory completion - hook to expand the filename before calling executable_file or - executable_or_directory; change command_word_completion_function to - call executable_completion. This allows $HOME/bin/[TAB] to do - command completion and display alternatives - - 1/17 - ---- -pcomplete.c - - gen_command_matches: now takes a new second argument: the command - name as deciphered by the programmable completion code and used - to look up the compspec; changed callers (gen_compspec_completions) - - gen_shell_function_matches: now takes a new second argument: the - command that originally caused the completion function to be - invoked; changed callers (gen_compspec_completions)) - - build_arg_list: now takes a new second argument: the command name - corresponding to the current compspec; changed callers - (gen_command_matches, gen_shell_function_matches) - - build_arg_list: now uses `cmd' argument to create $1 passed to - invoked command or shell function - - gen_compspec_completions: if we skipped a null command at the - beginning of the line (e.g., for completing `>'), add a new word for - it at the beginning of the word list and increment nw and cw - appropriately. This is all a partial fix for the shortcoming - pointed out by Sung Pae - - 1/18 - ---- - -{configure,config.h}.in - - new check: check for AUDIT_USER_TTY defined in , - define HAVE_DECL_AUDIT_USER_TTY if both are found - -lib/readline/rlconf.h - - ENABLE_TTY_AUDIT_SUPPORT: new define, allows use of the Linux kernel - tty auditing system if it's available and enabled - -lib/readline/util.c - - _rl_audit_tty: new function, send a string to the kernel tty audit - system - -lib/readline/rlprivate.h - - _rl_audit_tty: new extern declaration - -lib/readline/readline.c - - readline: call _rl_audit_tty with line to be returned before returning - it if the Linux tty audit system is available and it's been enabled - in rlconf.h Original patch from Miroslav Trmac; recent request - from Miroslav Lichvar - - 1/21 - ---- - -lib/readline/readline.c: - - _rl_dispatch_subseq: add an inter-character timeout for multi-char - key sequences. Suggested by . Still needs - work to make a user-settable variable - -parse.y - - shell_getc: make code that uses the pop_alias dependent on ALIAS - define - -variables.h - - sv_tz: extern define should only depend on HAVE_TZSET - -expr.c - - expr_streval: if ARRAY_VARS is not defined, set lvalue->ind to -1; - move assignment to `ind' inside define - - expr_bind_array_element: declaration and uses need to be #ifdef - ARRAY_VARS - -arrayfunc.h - - AV_ALLOWALL, AV_QUOTED, AV_USEIND: define to 0 if ARRAY_VARS not - defined; used in subst.c unconditionally - -sig.h - - make the signal blocking functions not dependent on JOB_CONTROL - -sig.c - - sigprocmask: make the replacement definition not dependent on - JOB_CONTROL - -trap.c - - use BLOCK_SIGNAL/UNBLOCK_SIGNAL instead of code dependent on - HAVE_POSIX_SIGNALS and BSD signals - - 1/24 - ---- - -print_cmd.c - - print_redirection_list: change the conditions under which - r_duplicating_output_word is mapped to r_err_and_out to more or - less match those used in redir.c. Fixes bug pointed out by - Dan Douglas - - - 1/29 - ---- -lib/readline/signals.c - - _rl_block_sigwinch,_rl_release_sigwinch: don't compile in bodies - unless SIGWINCH is defined. Fixes bug reported by Pierre Muller - - -doc/{bash.1,bashref.texi} - - small modifications to the introduction to the REDIRECTION section - to describe how redirections can modify file handles - - small modification to the section describing base#n to make it - clearer that n can be denoted using non-numerics. From a posting - by Linda Walsh - - 2/2 - --- -builtins/printf.def - - printf_builtin: make sure vbuf is intialized and non-null when -v - is supplied, since other parts of the code assume that it's not - null (e.g., bind_printf_variable()). Fixes bug reported by Jim - Avera - - 2/4 - --- -lib/readline/undo.c - - _rl_free_undo_list: new function, old body of rl_free_undo_list, - frees undo entries in UNDO_LIST * passed as argument - - rl_free_undo_list: call _rl_free_undo_list - -lib/readline/rlprivate.h - - _rl_free_undo_list: new extern declaration - - _rl_keyseq_timeout: new extern declaration (see below) - -lib/readline/misc.c - - rl_clear_history: new function. Clears the history list and frees - all associated data similar to history.c:clear_history(), but - takes rl_undo_list into account and frees and UNDO_LISTs saved as - `data' members of a history list entry - -lib/readline/doc/rltech.texi - - rl_clear_history: documented - -lib/readline/readline.c - - _rl_keyseq_timeout: new variable to hold intra-key timeout value - from 1/21 fix; specified in milliseconds. Default value is 500 - - _rl_dispatch_subseq: change to use _rl_keyseq_timeout as intra-key - timeout if it's greater than 0; no timeout if <= 0 - - _rl_dispatch_subseq: don't check for queued keyboard input if we have - pushed or pending input, or if we're reading input from a macro - -lib/readline/bind.c - - keyseq-timeout: new bindable variable, shadows _rl_keyseq_timeout - - string_varlist: add keyseq-timeout - - sv_seqtimeout: new function to modify value of _rl_keyseq_timeout; - clamps negative values at 0 for now - - _rl_get_string_variable_value: return value for keyseq-timeout - -doc/bash.1,lib/readline/doc/{rluser.texi,readline.3} - - keyseq-timeout: documented - -lib/readline/isearch.c - - _rl_isearch_dispatch: modification to fix from 7/18 to not use - cxt->keymap and cxt->okeymap, since by the time this code is - executed, they are equal. Use `f' to check for rl_insert or - unbound func - - _rl_isearch_dispatch: if we're switching keymaps, not in - callback mode, and don't have pending or pushed input, use - _rl_input_queued to resolve a potentially ambiguous key sequence. - Suggested by Roger Zauner - - _rl_isearch_dispatch: if we have changed keymaps and resolved to - an editing function (not self-insert), make sure we stuff the - right characters back onto the input after changing the keymap - back so the right editing function is executed after the search - is terminated. Rest of fix for bug reported by Roger Zauner - - - 2/5 - --- -builtins/gen-helpfiles.c - - new file: reads struct builtin and writes the long docs to files - in the `helpdirs' subdirectory. The filename is given in the - previously-unused `handle' member of the struct builtin. Links - with `tmpbuiltins.o', which is created by Makefile to have the - right long documentation. When not cross-compiling, gets the - right #defines based on configuration options from config.h instead - of trying to parse conditional parts of def files. Fixes - shortcoming pointed out by Andreas Schwab - -builtins/Makefile.in - - tmpbuiltins.c: new generated file, created to enable creation of - separate helpfiles based on correct #defines instead of trying to - parse conditional parts of def files - - gen-helpfiles: new program to generate helpfiles, links with - tmpbuiltins.o - - HELPFILES_TARGET: new target, substituted by configure to `helpdoc' - if separate helpfiles requested - - targets: new target, libbuiltins.a and $(HELPFILES_TARGET) - - CREATED_OBJECTS: new variable, holds created object files for - make clean; changed make clean to remove created objects - - helpdoc: changed to call gen-helpfiles instead of mkbuiltins - -Makefile.in - - when building libbuiltins.a, recursively call make with `targets' - argument to make sure separate helpfiles get built - -configure.in - - substitute `helpdoc' as value of HELPFILES_TARGET if - --enable-separate-helpfiles supplied as configure argument - -builtins/mkbuiltins.c - - `-nofunctions': new argument, causes mkbuiltins to not write value - for function implementing a particular builtin to struct builtin - and to write document file name to `handle' member of struct builtin - - no longer writes separate helpfiles; that is left to gen-helpfiles - - 2/8 - --- -subst.c - - make sure last_command_exit_value is set to a non-zero value before - any calls to report_error, since `-e' set will short-circuit - report_error. Fixes bug reported by Ewan Mellor - - -variables.c - - make_local_array_variable: added second argument; if non-zero, - function will return an existing local associative array variable - instead of insisting on an indexed array - -variable.h,subst.c - - make_local_array_variable: changed prototype and caller - -builtins/declare.def - - declare_internal: add second arg to call to make_local_array_variable; - making_array_special, which indicates we're processing an - assignment like declare a[b]=c. Fixes seg fault resulting from - a being an already-declared local associative array variable in a - function. Ubuntu bash bug 928900. - - 2/14 - ---- - -execute_cmd.c - - execute_command_internal: if redirections into or out of a loop fail, - don't try to free ofifo_list unless saved_fifo is non-zero. It's - only valid if saved_fifo is set - - 2/15 - ---- -{arrayfunc,braces,variables}.c - - last_command_exit_value: make sure it's set before any calls to - report_error, since -e will cause that to exit the shell - -builtins/common.c - - get_job_by_name: call internal_error instead of report_error so this - doesn't exit the shell - - 2/18 - ---- -builtins/evalstring.c - - parse_and_execute: make sure the file descriptor to be redirected to - is 1 before calling cat_file. One fix for bug reported by Dan Douglas - - -parse.y - - read_token_word: don't return NUMBER if a string of all digits - resolves to a number that overflows the bounds of an intmax_t. - Other fix for bug reported by Dan Douglas - - 2/19 - ---- -lib/sh/strtrans.c - - ansicstr: use 0x7f as the boundary for characters that translate - directly from ASCII to unicode (\u and \U escapes) instead of - UCHAR_MAX, since everything >= 0x80 requires more than one byte. - Bug and fix from John Kearney - -builtins/printf.def - - tescape: ditto for printf \u and \U escape sequences - - 2/20 - ---- -lib/sh/unicode.c - - u32toutf8: fix to handle encodings up to six bytes long correctly - (though technically UTF-8 only has characters up to 4 bytes long). - Report and fix from John Kearney - - u32toutf8: first argument is now an unsigned 32-bit quantity, - changed callers (u32cconv) to pass c instead of wc - - u32reset: new function, resets local static state to uninitialized - (locale information, currently) - -locale.c - - call u32reset whenever LC_CTYPE/LC_ALL/LANG is changed to reset the - cached locale information used by u32cconv. From a report from - John Kearney - - 2/21 - ---- -doc/{bash,builtins}.1 - - minor changes from Bjarni Ingi Gislason - -lib/sh/unicode.c - - u32cconv: only assume you can directly call wctomb on the passed - value if __STDC_ISO_10646__ is defined and the value is <= - 0x7fffffff - - stub_charset: return locale as default instead of "ASCII", let - rest of code decide what to do with it - -lib/readline/parens.c - - _rl_enable_paren_matching: make paren matching work in vi insert - mode. Bug report from - - 2/22 - ---- -lib/sh/shquote.c - - sh_backslash_quote: quote tilde in places where it would be - expanded. From a report from John Kearney - - 2/23 - ---- -execute_cmd.c - - execute_pipeline: wrap the discard_unwind_frame call in #ifdef - JOB_CONTROL, since the frame is only created if JOB_CONTROL is - defined. Bug and fix from Doug Kehn - - 2/25 - ---- -error.c - - report_error: make sure last_command_exit_value is non-zero before - we call exit_shell, since the exit trap may reference it. Call - exit_shell with last_command_exit_value to allow exit statuses - other than 1 - -unicode.c - - stub_charset: use local static buffer to hold charset, don't change - value returned by get_locale_var. Based on idea and code from - John Kearney - - u32toutf16: function to convert unsigned 32-bit value (unicode) to - UTF-16. From John Kearney - - u32cconv: call u32toutf16 if __STDC_ISO_10646__ defined and wchar_t - is two bytes, send result to wcstombs, return if not encoding error. - From John Kearney - - u32cconv: return UTF-8 conversion if iconv conversion to local - charset is unsupported - - 3/2 - --- -lib/readline/complete.c - - print_filename: if there is no directory hook, but there is a stat - hook, and we want to append a slash to directories, call the stat - hook before calling path_isdir on the expanded directory name. - Report and pointer to fix from Steve Rago - - 3/3 - --- -builtins/evalstring.c - - parse_and_execute: fix to change of 2/18: make sure the file - descriptor being redirected to is 0 before calling cat_file when - we see something like $(< file). Real fix for bug reported by - Dan Douglas - -subst.c - - parameter_brace_patsub: run the replacement string through quote - removal even if the expansion is within double quotes, because - the parser and string extract functions treat the quotes and - backslashes as special. If they're treated as special, quote - removal should remove them (this is the Posix position and - compatible with ksh93). THIS IS NOT BACKWARDS COMPATIBLE. - - 3/4 - --- -lib/readline/complete.c - - rl_menu_complete: fix to make show-all-if-ambiguous and - menu-complete-display-prefix work together if both are set. Fix - from Sami Pietila - - 3/5 - --- -bashline.c - - dircomplete_expand_relpath: new variable, if non-zero, means that - `shopt -s direxpand' should expand relative pathnames. Zero by - default, not user-settable yet - - bash_directory_completion_hook: if we have a relative pathname that - isn't changed by canonicalization or spell checking after being - appended to $PWD, then don't change what the user typed. Controlled - by dircomplete_expand_relpath - - 3/7 - --- -m4/timespec.m4 - - new macros, cribbed from gnulib and coreutils: find out whether we - have `struct timespec' and what file includes it - -m4/stat-time.m4 - - new macros, cribbed from gnulib and coreutils: find out whether the - mtime/atime/ctime/etctime fields of struct stat are of type - struct timespec, and what the name is - -include/stat-time.h - - new file, cribbed from gnulib, with additions from coreutils: include - the right file to get the struct timespec define, or provide our own - replacement. Provides a bunch of inline functions to turn the - appropriate members of struct stat into `struct timespec' values, - zeroing out the tv_nsec field if necessary - -test.c - - include "stat-time.h" for the nanosecond timestamp resolution stuff - - stat_mtime: new function, returns struct stat and the mod time - normalized into a `struct timespec' for the filename passed as the - first argument - - filecomp: call stat_mtime instead of sh_stat for each filename - argument to get the mtime as a struct timespec - - filecomp: call timespec_cmp instead of using a straight arithmetic - comparison for the -nt and -ot operators, using timespec returned by - stat_mtime. Added functionality requested by by Werner Fink - for systems that can support it - - 3/10 - ---- -include/posixdir.h - - REAL_DIR_ENTRY: remove dependency on _POSIX_SOURCE, only use feature - test macros to decide whether dirent.d_ino is present and usable; - define D_INO_AVAILABLE. Report and fix from Fabrizion Gennari - - - D_FILENO_AVAILABLE: define if we can use dirent.d_fileno - -lib/sh/getcwd.c - - use D_FILENO_AVAILABLE to decide whether or not to compile in - _path_checkino and whether or not to call it. Report and initial - fix from Fabrizion Gennari - -lib/readline/signals.c - - make sure all occurrences of SIGWINCH are protected by #ifdef - -sig.c - - make sure all occurrences of SIGCHLD are protected by #ifdef - -nojobs.c - - make sure SA_RESTART is defined to 0 if the OS doesn't define it - -version.c - - show_shell_version: don't use string literals in printf, use %s. - Has added benefit of removing newline from string to be translated - -trap.c - - queue_sigchld_trap: new function, increments the number of pending - SIGCHLD signals by the argument, which is by convention the number - of children reaped in a call to waitchld() - -trap.h - - queue_sigchld_trap: new extern declaration - -jobs.c - - waitchld: if called from the SIGCHLD signal handler (sigchld > 0), - then call queue_sigchld_trap to avoid running the trap in a signal - handler context. Report and original fix from Siddhesh Poyarekar - - -lib/sh/unicode.c - - u32tocesc: take an unsigned 32-bit quantity and encode it using - ISO C99 string notation (\u/\U) - - u32cconv: call u32tocesc as a fallback instead of u32cchar - - u32cconv: call u32tocesc if iconv cannot convert the character. - Maybe do the same thing if iconv_open fails - - u32reset: call iconv_close on localconv if u32init == 1 - - 3/11 - ---- -config-top.h - - CHECKWINSIZE_DEFAULT: new define, set to initial value of - check_window_size (shopt checkwinsize): 0 for off, 1 for on. - Default is 0 - -{jobs,nojobs}.c - - check_window_size: default initial value to CHECKWINSIZE_DEFAULT - - 3/13 - ---- -doc/bashref.texi - - change text referring to the copying restrictions to that - recommended by the FSF (no Front-Cover Texts and no Back-Cover - Texts) - -lib/readline/doc/{history,rlman,rluserman}.texi - - change text referring to the copying restrictions to that - recommended by the FSF (no Front-Cover Texts and no Back-Cover - Texts) - - 3/15 - ---- -array.c - - LASTREF_START: new macro to set the starting position for an array - traversal to `lastref' if that's valid, and to the start of the array - if not. Used in array_reference, array_insert, array_remove - - array_remove: try to be a little smarter with lastref instead of - unconditionally invalidating it - - 3/16 - ---- -array.c - - array_insert: fix memory leak by deleting element to be added in the - case of an error - - 3/18 - ---- -lib/sh/mbschr.c - - mbschr: don't call mbrlen unless is_basic is false; devolves to a - straight character-by-character run through the string - - 3/19 - ---- -stringlib.c - - substring: use memcpy instead of strncpy, since we know the length - and are going to add our own NUL terminator - - 3/20 - ---- -subst.c - - parameter_brace_expand_rhs: if expand_string_for_rhs returns a quoted - null string (a list with one element for which - QUOTED_NULL(list->word->word) returns true), return the quoted null - and set the flags in the returned word to indicate it. Fixes bug - reported by Mark Edgar - -lib/sh/tmpfile.c - - use random(3) instead of get_random_number to avoid perturbing the - random sequence you get using $RANDOM. Bug report and fix from - Jurij Mihelic - - 3/21 - ---- -config-top.h - - OPTIMIZE_SEQUENTIAL_ARRAY_ASSIGNMENT: define to 1 to optimize - sequential indexed array assignment patterns. Defined to 1 by - default - -array.c - - array_insert: if OPTIMIZE_SEQUENTIAL_ARRAY_ASSIGNMENT is defined, - start the search at lastref (see change from 3/15) - - 3/27 - ---- -print_cmd.c - - debug_print_word_list: new debugging function, prints a word list - preceded by an optional string and using a caller-specified - separator - - 4/1 - --- -command.h - - W_ASSNGLOBAL: new flag, set to indicate declare -g - -execute_cmd.c - - fix_assignment_words: note that we have a -g argument to an assignment - builtin and set the W_ASSNGLOBAL flag in the variable word - -subst.c - - dump_word_flags: print out W_ASSNGLOBAL if present - - do_assignment_internal: only set ASS_MKLOCAL if W_ASSIGNARG is set - and W_ASSNGLOBAL is not. Don't want to create a local variable even - if variable_context is non-zero if ASSNGLOBAL is set. Fixes bug - reported by Bill Gradwohl - - 4/7 - --- -lib/readline/readline.c - - _rl_dispatch_subseq: make the `keyseq-timeout' variable apply to - ESC processing when in vi mode. After hitting ESC, readline will - wait up to _rl_keyseq_timeout*1000 microseconds (if set) for - additional input before dispatching on the ESC and switching to - command/movement mode. Completes timeout work suggested by - ; this prompted by report from Barry Downes - - -lib/sh/shmbchar.c - - sh_mbsnlen: new function, returns the number of (possibly multibyte) - characters in a passed string with a passed length, examining at most - maxlen (third argument) bytes - -externs.h - - sh_mbsnlen: extern declaration for new function - -shell.c - - exit_shell: call maybe_save_shell_history if remember_on_history is - set, not just in interactive shells. That means the history is - saved if history is enabled, regardless of whether or not the shell - is interactive - -doc/{bash.1,bashref.texi} - - TMOUT: fix description to make it explicit that TMOUT is the timeout - period for a complete line of input, not just any input. Fixes - problem reported in Ubuntu bug 957303: - https://bugs.launchpad.net/ubuntu/+source/bash/+bug/957303 - - HISTFILE: document change to write history list to history file in - any shell with history enabled, not just interactive shells. This - seems to be more logical behavior. Suggested by Greg Wooledge - - - 4/12 - ---- -lib/readline/colors.h - - only include stdbool.h if HAVE_STDBOOL_H is defined - - if HAVE_STDBOOL_H is not defined, provide enough definition for the - library to use `bool', `true', and `false' - -lib/readline/parse-colors.[ch] - - don't try to include at all; rely on colors.h to do it - -lib/sh/snprintf.c - - vsnprintf_internal: only treat '0' as a flag to indicate zero padding - if `.' hasn't been encountered ((flags&PF_DOT) == 0); otherwise treat - it as the first digit of a precision specifier. Fixes bug reported - by Petr Sumbera - - 4/15 - ---- -lib/sh/snprintf.c - - vsnprintf_internal: if the '0' and '-' flags both occur, the '0' - flag is ignored -- Posix. Start of a series of fixes based on - tests and patches from Petr Sumbera - - PUT_PLUS: make sure PF_PLUS flag is specified before putting the `+' - - vsnprintf_internal: when '+' is read as a flag, don't set right- - justify flag if the LADJUST (`-') flag has already been supplied - - floating: make sure to output space padding before the `+', zero - padding after - - exponent: make sure to output space padding before the `+', zero - padding after - - exponent: only subtract one from the width for the decimal point - if we're really going to print one - - floating: use presence of PF_PLUS flag to decide whether to account - for the `+' in the padded field width. Ditto for exponent() - - 4/16 - ---- -lib/sh/snprintf.c - - vsnprint_internal: only reduce precision by 1 when processing the `g' - format if it's > 0. A precision of 0 should stay 0; otherwise it - gets set to -1 (NOT_FOUND) and converted to the default - - number, lnumber: if an explicit precision is supplied, turn off the - zero-padding flag and set the pad character back to space - - number, lnumber: only account for a `+' when performing the field - width calculation if the coversion is base 10; we don't add a `+' - for other bases - - 4/18 - ---- -tests/printf3.sub - - try using "perl -e 'print time'" to get the current time in seconds - since the epoch if "date +%s" is not available (solaris 8-10) - - 4/19 - ---- -tests/run-printf - - use cat -v instead of relying on diff -a being available to convert - control characters to ascii and avoid the dreaded "Binary files - /tmp/xx and printf.right differ" - - 4/20 - ---- -lib/sh/strftime.c - - incoporated new version from Aharon Robbins - - 4/22 - ---- -doc/{bash.1,bashref.texi} - - slight change to the description of /dev/tcp and /dev/udp - -subst.c - - match_wpattern: logic fix to the calculation of `simple' (was |=, - needs to be &=). Bug report from Mike Frysinger , - fix from Andreas Schwab - -bashline.c - - bash_filename_stat_hook: add code from bash_directory_completion_hook - that performs pathname canonicalization in the same way that cd and - other builtins will do - - 4/25 - ---- -execute_cmd.c - - execute_pipeline: change the call to move_to_high_fd to make it use - getdtablesize() and to not stomp on existing open file descriptors, - like the fd the shell is using to read a script. Bug report from - Greg Wooledge - - 5/6 - --- -subst.c - - expand_word_internal: case '$': after calling param_expand and - setting had_quoted_null, set TEMP to null. The code that builds the - returned string at the end of the function will take care of making - and returning a quoted null string if there's nothing else in - ISTRING. If there is, the quoted null should just go away. Part of - fix for bug reported by Ruediger Kuhlmann - - expand_word_internal: when processing ISTRING to build return value, - only set W_HASQUOTEDNULL in the returned word flags if the word is - a quoted null string AND had_quoted_null is set. Rest of fix - - 5/9 - --- -variables.c - - bind_variable_internal: if we get an array variable here (implicit - assignment to index 0), call make_array_variable_value, which - dummies up a fake SHELL_VAR * from array[0]. This matters when - we're appending and have to use the current value - - bind_variable_internal: after computing the new value, treat assoc - variables with higher precedence than simple array variables; it - might be that a variable has both attributes set - -arrayfunc.c - - bind_array_var_internal: break code out that handles creating the - new value to be assigned to an array variable index into a new - function, make_array_variable_value. This handles creating a - dummy SHELL_VAR * for implicit array[0] assignment. Fixes bug - reported by Dan Douglas - -arrayfunc.h - - make_array_variable_value: new extern declaration - - 5/19 - ---- -variables.c - - bind_int_variable: if an assignment statement like x=y comes in - from the expression evaluator, and x is an array, handle it like - x[0]=y. Fixes bug reported by Dan Douglas - - 5/24 - ---- - -braces.c - - mkseq: handle possible overflow and break the sequence generating - loop if it occurs. Fixes OpenSUSE bug 763591: - https://bugzilla.novell.com/show_bug.cgi?id=763591 - - 5/25 - ---- -Makefile.in - - LDFLAGS_FOR_BUILD: add to compilation recipes for build tools - buildversion, mksignames, mksyntax - - LDFLAGS_FOR_BUILD: add to compilation recipes for test tools - recho, zecho, printenv, xcase - -builtins/Makefile.in - - LDFLAGS_FOR_BUILD: add to compilation recipes for build tools - gen-helpfiles, psize.aux - -variables.c - - bind_int_variable: if LHS is a simple variable name without an array - reference, but resolves to an array variable, call - bind_array_variable with index 0 to make x=1 equivalent to x[0]=1. - Fixes bug reported by Dan Douglas - - 5/27 - ---- -subst.c - - expand_word_internal: make sure has_dollar_at doesn't get reset before - recursive calls to param_expand or expand_word_internal, since it has - to save state of what came before. Use temp variable and make sure - has_dollar_at is incremented if recursive call processes "$@". - Fixes bug reported by gregrwm and - supplemented by Dan Douglas - -doc/{bash.1,bashref.texi} - - changes to the description of substring expansion inspired by - suggestions from Bill Gradwohl - -doc/bashref.texi - - added substring expansion examples inspired by suggestions from - Bill Gradwohl - -variables.c - - find_shell_variable: search for a variable in the list of shell - contexts, ignore the temporary environment - - find_variable_tempenv: search for a variable in the list of shell - contexts, force search of the temporary environment - - find_variable_notempenv: search for a variable in the list of shell - contexts, don't force search of the temporary environment - -variables.h - - find_shell_variable: extern declaration - - find_variable_tempenv: extern declaration - - find_variable_notempenv: extern declaration - -arrayfunc.c - - bind_array_variable: call find_shell_variable instead of calling - var_lookup directly - -findcmd.c - - search_for_command: call find_variable_tempenv instead of - find_variable_internal directly - - _find_user_command_internal: call find_variable_tempenv instead of - find_variable_internal directly - -builtins/setattr.def - - set_var_attribute: call find_variable_notempenv instead of - find_variable_internal directly - - show_name_attributes: call find_variable_tempenv instead of - find_variable_internal directly - - 6/1 - --- -sig.c - - termsig_handler: don't try to save the shell history on a terminating - signal any more, since it just causes too many problems on Linux - systems using glibc and glibc malloc - -lib/readline/vi_mode.c - - rl_vi_change_to: change to correctly redo `cc', since `c' is not a vi - motion character. From Red Hat bug 813289 - - rl_vi_delete_to: change to correctly redo `dd', since `d' is not a vi - motion character - - rl_vi_yank_to: change to correctly redo `yy', since `y' is not a vi - motion character - - 6/4 - --- -lib/sh/mktime.c - - current versions of VMS do not need to include . Fix from - John E. Malmberg - - 6/5 - --- -lib/sh/eaccess.c - - sh_stat: instead of using a static buffer to do the DEV_FD_PREFIX - translation, use a dynamically-allocated buffer that we keep - resizing. Fixes potential security hole reported by David Leverton - - - 6/5 - --- -braces.c - - expand_seqterm: check errno == ERANGE after calling strtoimax for - rhs and incr. Part of a set of fixes from Scott McMillan - - - expand_seqterm: incr now of type `intmax_t', which changes - arguments to mkseq - - mkseq: a better fix for detecting overflow and underflow since it's - undefined in C and compilers `optimize' out overflow checks. Uses - ADDOVERFLOW and SUBOVERFLOW macros - - mkseq: use sh_imaxabs (new macro) instead of abs() for intmax_t - variables - - mkseq: don't allow incr to be converted to -INTMAX_MIN - - mkseq: make sure that strvec_create isn't called with a size argument - greater than INT_MAX, since it only takes an int - - 6/6 - --- -braces.c - - mkseq: try and be smarter about not overallocating elements in - the return array if the increment is not 1 or -1 - - 6/7 - --- -parse.y - - history_delimiting_chars: if the parser says we're in the middle of - a compound assignment (PST_COMPASSIGN), just return a space to avoid - adding a stray semicolon to the history entry. Fixes bug reported - by "Davide Brini" - - 6/8 - --- -bashline.c - - bash_directory_completion_hook: don't attempt spelling correction - on the directory name unless the direxpand option is set and we are - going to replace the directory name with the corrected one in the - readline line. Suggested by Linda Walsh - -lib/sh/shquote.c - - sh_backslash_quote: now takes a third argument: flags. If non-zero, - tildes are not backslash-escaped. Have to handle both printf %q, - where they should be escaped, and filename completion, where they - should not when used as usernames - -externs.h - - sh_backslash_quote: declaration now takes a third argument - -builtins/printf.def - - printf_builtin: call sh_backslash_quote with 1 as third argument - so tildes get escaped - -{bashline,bracecomp}.c - - call sh_backslash_quote with 0 as third argument so tildes are not - escaped in completed words - -doc/bash.1 - - add `coproc' to the list of reserved words. From a report by - Jens Schweikhardt - - 6/10 - ---- -execute_cmd.c - - line_number_for_err_trap: now global, so parse_and_execute can save - and restore it with unwind-protect - -builtins/evalstring.c - - parse_prologue: save and restore line_number_for_err_trap along - with line_number - - restore_lastcom: new function, unwind-protect to restore - the_printed_command_except_trap - - parse_prologue: use restore_lastcom to save and restore the value - of the_printed_command_except_trap around calls to parse_and_execute - (eval/source/.) - - 6/15 - ---- -lib/readline/complete.c - - complete_fncmp: change filename comparison code to understand - multibyte characters, even when doing case-sensitive or case-mapping - comparisons. Fixes problem reported by Nikolay Shirokovskiy - - - 6/20 - ---- -builtins/mapfile.def - - mapfile: move the line count increment and check for having read - the specified number of lines to the end of the loop to avoid - reading an additional line with zgetline. Fixes bug reported by - Dan Douglas - - 6/21 - ---- - -execute_cmd.c - - execute_pipeline: make sure `lastpipe_flag' is initialized to 0 on - all systems, since it's tested later in the function. Fixes bug - reported by John E. Malmberg - - 6/22 - ---- -mailcheck.c - - file_mod_date_changed: return 0 right away if mailstat() does not - return success. Fixes bug with using uninitialized values reported - by szymon.kalasz@uj.edu.pl - -builtins/set.def - - the `monitor' option is not available when the shell is compiled - without job control, since the underlying `m' flag is not available - -nojobs.c - - job_control: now declared as int variable, initialized to 0, never - modified - -jobs.h - - job_control: extern declaration no longer dependent on JOB_CONTROL - -execute_cmd.c - - execute_pipeline: made necessary changes so `lastpipe' shell option - is now available in all shells, even those compiled without - JOB_CONTROL defined - - 6/23 - ---- -lib/glob/glob.c - - glob_filename: check for interrupts before returning if glob_vector - returns NULL or an error. Bug reported by Serge van den Boom - , fix from Andreas Schwab - - call run_pending_traps after each call to QUIT or test of - interrupt_state, like we do in mainline shell code - - glob_vector: don't call QUIT; in `if (lose)' code block; just free - memory, return NULL, and let callers deal with interrupt_state or - other signals and traps - - 6/25 - ---- -lib/readline/input.c - - rl_read_key: restructure the loop that calls the event hook a little, - so that the hook is called only after rl_gather_tyi returns no input, - and any pending input is returned first. This results in better - efficiency for processing pending input without calling the hook - on every input character as bash-4.1 did. From a report from - Max Horn - - 6/26 - ---- -trap.c - - signal_is_pending: return TRUE if SIG argument has been received and - a trap is waiting to execute - -trap.h - - signal_is_pending: extern declaration - -lib/glob/glob.c - - glob_vector: check for pending SIGINT trap each time through the loop, - just like we check for interrupt_state or terminating_signal, and - set `lose = 1' so we clean up after ourselves and interrupt the - operation before running the trap. This may require a change later, - maybe call run_pending_traps and do that if run_pending_traps returns? - -variables.c - - sv_histtimefmt: set history_comment_character to default (`#') if - it's 0 when we're turning on history timestamps. The history code - uses the history comment character to prefix timestamps, and - leaving it at 0 effectively removes them from the history. From a - report to help-bash by Dennis Williamson - - 6/27 - ---- -lib/readline/signals.c - - rl_maybe_restore_sighandler: new function, sets handler for SIG to - HANDLER->sa_handler only if it's not SIG_IGN. Needs to be called - on same signals set using rl_maybe_set_sighandler, which does not - override an existing SIG_IGN handler (SIGALRM is ok since it does - the check inline; doesn't mess with SIGWINCH) - - 6/30 - ---- -variables.h - - additional defines for the new `nameref' variable attribute - (att_nameref): nameref_p, nameref_cell, var_setref - -variables.c - - find_variable_nameref: resolve SHELL_VAR V through chain of namerefs - - find_variable_last_nameref: resolve variable NAME until last in a - chain of possibly more than one nameref starting at shell_variables - - find_global_variable_last_nameref: resolve variable NAME until last - in a chain of possibly more than one nameref starting at - global_variables - - find_nameref_at_context: resolve SHELL_VAR V through chain of namerefs - in a specific variable context (usually a local variable hash table) - - find_variable_nameref_context: resolve SHELL_VAR V through chain of - namerefs following a chain of varible contexts - - find_variable_last_nameref_context: resolve SHELL_VAR V as in - find_variable_last_context, but return the final nameref instead of - what the final nameref resolves to - - find_variable_tempenv, find_variable_notempenv, find_global_variable, - find_shell_variable, find_variable: modified to follow namerefs - - find_global_variable_noref: look up a global variable without following - any namerefs - - find_variable_noref: look up a shell variable without following any - namerefs - - bind_variable_internal: modify to follow a chain of namerefs in the - global variables table; change to handle assignments to a nameref by - following nameref chain - - bind_variable: modify to follow chain of namerefs when binding to a - local variable - - unbind_variable: changes to unset nameref variables (unsets both - nameref and variable it resolves to) - -subst.c - - parameter_brace_expand_word: change to handle expanding nameref whose - value is x[n] - - parameter_brace_expand_indir: change to expand in ksh93-compatible - way if variable to be indirected is nameref and a simple (non-array) - expansion - - param_expand: change to expand $foo where foo is a nameref whose value - is x[n] - -execute_cmd.c - - execute_for_command: changes to implement ksh93 semantics when index - variable is a nameref - -builtins/setattr.def - - show_var_attributes: change to add `n' to flags list if att_nameref - is set - -builtins/set.def - - unset_builtin: changes to error messages to follow nameref variables - -builtins/declare.def - - document new -n option - - declare_internal: new `-n' and `+n' options - - declare_internal: handle declare -n var[=value] and - declare +n var[=value] for existing and non-existant variables. - Enforce restriction that nameref variables cannot be arrays. - Implement semi-peculiar ksh93 semantics for typeset +n ref=value - - 7/5 - --- -variables.c - - unbind_variable: unset whatever a nameref resolves to, leaving the - nameref variable itself alone - - unbind_nameref: new function, unsets a nameref variable, not the - variable it references - -variables.h - - unbind_nameref: extern declaration - -builtins/set.def - - unset_builtin: modify to add -n option, which calls unbind_nameref - leaving unbind_variable for the usual case. This required slight - changes and additions to the test suite - -doc/{bash.1,bashref.texi} - - document namerefs and typeset/declare/local/unset -n - - 7/13 - ---- -lib/sh/casemod.c - - include shmbchar.h for is_basic and supporting pieces - - sh_casemod: use _to_wupper and _to_wlower to convert wide character - case instead of TOUPPER and TOLOWER. Fixes bug reported by - Dennis Williamson , fix from - Andreas Schwab - - cval: short-circuit and return ascii value if is_basic tests true - - sh_casemod: short-circuit and use non-multibyte case modification - and toggling code if is_basic tests true - -lib/readline/signals.c - - _rl_{block,release}_sigint: remove the code that actually blocks and - releases the signals, since we defer signal handling until calls to - RL_CHECK_SIGNALS() - -lib/readline/{callback,readline,util}.c - - if HAVE_POSIX_SIGSETJMP is defined, use sigsetjmp/siglongjmp without - saving and restoring the signal mask instead of setjmp/longjmp - -lib/readline/rltty.c - - prepare_terminal_settings: don't mess with IXOFF setting if - USE_XON_XOFF defined - -doc/{bash.1,bashref.texi} - - add some text to the description of set -e clarifying its effect - on shell functions and shell function execution. Suggested by - Rainer Blome - -bashline.c - - edit_and_execute_command: increment current_command_line_count before - adding partial line to command history (for command-oriented-history - because of rl_newline at beginning of function), then reset it to 0 - before adding the dummy history entry to make sure the dummy entry - doesn't get added to previous incomplete command. Partial fix for - problem reported by Peng Yu - - 7/24 - ---- -configure.in - - interix: define RECYCLES_PIDS. Based on a report from Michael - Haubenwallner - - 7/26 - ---- -jobs.c - - make_child: call bgp_delete on the newly-created pid unconditionally. - Some systems reuse pids before cycling through an entire set of - CHILD_MAX/_SC_CHILD_MAX unique pids. This is no longer dependent - on RECYCLES_PIDS. Based on a report from Michael Haubenwallner - - -support/shobj-conf - - Mac OS X: drop MACOSX_DEPLOYMENT_TARGET=10.3 from the LDFLAGS. We - can finally kill Panther - - 7/28 - ---- -subst.c - - command_substitute: make sure last_made_pid gets reset if make_child - fails - -execute_cmd.c - - execute_command_internal: case cm_simple: decide whether or not to - wait_for a child if already_making_children is non-zero, indicates - that there is an unwaited-for child. More of fix for bug report - from Michael Haubenwallner - -jobs.c - - make_child: call delete_old_job (new_pid) unconditionally, don't - bother to check whether or not pid wrap occurred. Rest of fix for - bug report from Michael Haubenwallner - - - 7/29 - ---- -shell.c - - subshell_exit: new function, exits the shell (via call to sh_exit()) - after calling any defined exit trap - -externs.h - - subshell_exit: new extern declaration - -execute_cmd.c - - execute_command_internal: make sure to call subshell_exit for - {} group commands executed asynchronously (&). Part of fix for - EXIT trap bug reported by Maarten Billemont - -sig.c - - reset_terminating_signals: make sure to set termsigs_initialized back - to 0, so a subsequent call to initialize_terminating_signals works - right. Rest of fix for bug reported by Maarten Billemont - - -{execute_cmd,general,jobs,mailcheck,mksyntax,test}.c -builtins/{cd,fc,pushd,ulimit}.def -lib/malloc/getpagesize.h -lib/sh/{clktck,fpurge,inet_aton,mailstat,oslib,pathcanon,pathphys,spell,strerror}.c - - make inclusion of dependent on HAVE_SYS_PARAM_H - consistently - - 8/6 - --- -lib/readline/histexpand.c - - history_expand_internal: now takes an additional argument saying - whether the history expansion occurs within a quoted string, set to - the open quote character - - history_expand_internal: use new argument instead of checking prev - char and initializing quoted_search_delimiter, pass qc directly to - get_history_event, where it allows a matching quote to terminate a - string defining an event - - history_expand: change single-quote handling code so that if - history_quotes_inhibit_expansion is 0, single quotes are treated - like double quotes - - history_expand: change call to history_expand_internal to pass new - argument of `"' if double-quoted string, `'' if single-quoted string; - this lets history_expand decide what is a quoted string and what - is not - - 8/7 - --- -configure.in - - AC_CANONICAL_BUILD: invoke for later use - -lib/readline/macro.c - - _rl_prev_macro_key: new function, inverse of _rl_next_macro_key: - backs up the index into the current macro by 1 - -lib/readline/rlprivate.h - - _rl_prev_macro_key: extern declaration - - -lib/readline/readline.c - - _rl_dispatch_subseq, _rl_subseq_result: don't call _rl_unget_char - if we're currently reading from a macro; call _rl_prev_macro_key - instead. Fixes bug reported by Clark Wang - - 8/13 - ---- -builtins/evalstring.c - - evalstring(): new function, wrapper around parse_and_execute. - make sure we handle cases where parse_and_execute can call `return' - and short-circuit without cleaning up properly. We call - parse_and_execute_cleanup() then jump to the previous-saved return - location - -builtins/common.h - - extern declaration for evalstring() - -builtins/eval.def - - eval_builtin: make sure we handle `eval " ... return"' in contexts - where `return' is valid by calling evalstring(). Fixes bug with - `eval return' in sourced files reported by Clark Wang - - -trap.c - - run_pending_traps: call evalstring instead of parse_and_execute. - XXX - still needs to handle saving and restoring token state in the - presence of `return'; could use unwind_protects for that - -builtins/mapfile.def - - run_callback: call evalstring instead of parse_and_execute - - 8/15 - ---- -bashline.c - - bash_filename_stat_hook: make sure we don't free local_dirname - before using it to canonicalize any expanded filename. Make sure - it always points to *dirname and only free it if we're replacing - it. - -lib/readline/complete.c - - append_to_match: make sure we call rl_filename_stat_hook with - newly-allocated memory to avoid problems with freeing it twice - - 8/17 - ---- -variables.c,config-top.h - - if ARRAY_EXPORT is defined to 1 when variables.c is compiled, the - code that allows indexed arrays to be exported is enabled and - included - - 8/19 - ---- -shell.c - - call start_debugger from main() only if dollar_vars[1] != 0 (close - enough to a non-interactive shell, since we can be interactive with - -i while running a shell script). Fixes oddity reported by - Techlive Zheng - - 8/20 - ---- -arrayfunc.c - - quote_array_assignment_chars: don't bother quoting if the word has - not been marked as an assignment (W_ASSIGNMENT) - - quote_array_assignment_chars: turn on W_NOGLOB in the word flags - so assignment statements don't undergo globbing. Partial fix for - problems reported by Dan Douglas - - 8/21 - ---- -command.h - - W_NOBRACE: new word flag that means to inhibit brace expansion - -subst.c - - brace_expand_word_list: suppress brace expansion for words with - W_NOBRACE flag - - 8/22 - ---- -builtins/read.def - - read_builtin: don't call dequote_string on what we've read, even if - we saw an escape character, unless (input_string && *input_string). - We may have escaped an IFS whitespace character. Fixes seg fault - reported by - -execute_cmd.c - - execute_command_internal: set the_printed_command_except trap when - about to execute a ( ... ) user subshell. For now, set it only if - ERR is trapped; can relax that later. Fixes bug reported by - Mike Frysinger - - 8/23 - ---- -jobs.c - - remove references to first_pid and pid_wrap, since we're not using - them for anything anymore - - 8/24 - ---- -subst.c - - changes for W_NOBRACE everywhere appropriate: so it can be displayed - for debugging, and passed out of expand_word_internal - -doc/{bash.1,bashref.texi} - - small changes to make it clearer that the = and == operators are - equivalent, and will cause pattern matching when used with [[. - From a question from Michal Soltys - -doc/bashref.texi - - some small formatting changes from Karl Berry - - 8/27 - ---- -lib/readline/doc/{history,rlman,rluserman}.texi - - some small formatting changes from Karl Berry - -arrayfunc.c - - assign_array_element_internal, assign_compound_array_list, - unbind_array_element, array_value_internal: changes to make - assignment statements to negative indices (a[-1]=2) and unsetting - array elements using negative indices (unset 'a[-1]') work. - From suggestions by Dennis Williamson - and Chris F. A. Johnson - -subst.c - - array_length_reference: changes to make length references to array - elements using negative indices (${#a[-1]}) work - - 8/28 - ---- -doc/{bash.1,bashref.texi} - - document new treatment of negative indices to indexed arrays when - assigning, referencing, calculating length, and unsetting - - 8/29 - ---- -shell.c - - show_shell_usage: add -l to list of shell invocation options (short - for --login). From Red Hat bug 852469 - -configure.ac - - renamed from configure.in, as latest autoconf versions want. Patches - Stefano Lattarini - -MANIFEST,Makefile.in,doc/bashref.texi,support/mkconffiles - - configure.in -> configure.ac - - 9/1 - --- - -parse.y - - read_token_word: allow words like {array[ind]} to be valid redirection - words for constructs like {x} - -lib/readline/display.c - - update_line: if the first difference between the old and new lines - is completely before any invisible characters in the prompt, we - should not adjust _rl_last_c_pos, since it's before any invisible - characters. Fixed in two places - - prompt_modechar: return a character indicating the editing mode: - emacs (@), vi command (:), or vi insert (+) - - _rl_reset_prompt: new function, just calls rl_expand_prompt. Will be - inlined, placeholder for more changes - - expand_prompt: if show-mode-in-prompt is enabled, add a character to - the front of the prompt indicating the editing mode, adjusting the - various variables as appropriate to keep track of the number of - visible characters and number of screen positions - -lib/readline/bind.c - - show-mode-in-prompt: new bindable boolean variable, shadowed by - _rl_show_mode_in_prompt variable - - hack_special_boolean_var: call _rl_reset_prompt when toggling or - setting show-mode-in-prompt - -lib/readline/readline.c - - readline_internal_setup: make sure the correct vi mode keymap is set - before expanding the prompt string for the first time - -lib/readline/misc.c - - rl_emacs_editing_mode: make sure to call _rl_reset_prompt if we're - showing the editing mode in the prompt - -lib/readline/rlprivate.h - - _rl_reset_prompt, _rl_show_mode_in_prompt: extern declarations - -lib/readline/vi_mode.c - - rl_vi_insertion_mode: call _rl_reset_prompt - - rl_vi_movement_mode: call _rl_reset_prompt. Finishes changes for - showing mode in prompt string, originally requested by Miroslav - Koskar and most recently by Jordan Michael - Ziegler - -doc/bash.1,lib/readline/doc/{readline.3,rluser.texi} - - document new show-mode-in-prompt variable, off by default - - 9/3 - --- - -jobs.c - - set_childmax: new function, external mechanism for other parts of - the shell to set js.c_childmax, the number of saved exited child - statuses to remember -jobs.h - - set_childmax: extern declaration - -variables.c - - CHILD_MAX: new special variable, with sv_childmax function to - run when it changes. Setting CHILD_MAX to a value greater than - zero but less than some maximum (currently 8192) sets the number of - exited child statuses to remember. set_childmax (jobs.c) ensures - that the number does not drop below the posix-mandated minimum - (CHILD_MAX) - -doc/{bash.1,bashref.texi} - - CHILD_MAX: document new meaning and action when variable is set - - 9/5 - --- -redir.c - - redir_varassign: call stupidly_hack_special_variables after - assigning fd number to specified variable, so we can use constructs - like {BASH_XTRACEFD}>foo. Suggested by Pierre Gaston - - - 9/8 - --- -expr.c - - readtok: invalidate previous contents of `curlval' before freeing - and reallocating tokstr (which, chances are, will get the same - pointer as before and render curlval inconsistent). Fixes other - bug reported by Dan Douglas - - 9/9 - --- -lib/readline/complete.c - - rl_username_completion_function: protect call to setpwent() with - #ifdef (HAVE_GETPWENT)/#endif. Fixes bug reported by - Gerd Hofmann - -lib/readline/display.c - - rl_message: second and subsequent calls to rl_message can result in - local_prompt being overwritten with new values (e.g., from the - successive calls displaying the incremental search string). Need - to free before overwriting if it's not the same as the value saved - in saved_local_prompt. Fixes memory leak reported by - Wouter Vermaelen - -lib/readline/{terminal.c,rlprivate.h} - - move CUSTOM_REDISPLAY_FUNC and CUSTOM_INPUT_FUNC defines from - terminal.c to rlprivate.h so other files can use them - -expr.c - - expr_streval: if noeval is non-zero, just return 0 right away, - short-circuiting evaluation completely. readtok will leave curtok - set correctly without re-entering the evaluator at all. Rest of - fix for bug reported by Dan Douglas - - 9/11 - ---- - -parse.y - - parse_comsub: make sure the `reserved word ok in this context' flag - is preserved after we read `do' followed by whitespace. Fixes bug - reported by Benoit Vaugon - - 9/13 - ---- -configure.ac,config.h.in - - enable-direxpand-default: new configure option, turns the `direxpand' - shell option on by default - -bashline.c - - dircomplete_expand, dircomplete_expand_relpath: initialize to 1 if - DIRCOMPLETE_EXPAND_DEFAULT is defined and non-zero - -doc/bashref.texi - - enable-direxpand-default: document new configure option - - 9/14 - ---- -shell.c - - --protected: make option valid only when wordexp is compiled into - the shell. Fix from Roman Rakus - -configure.ac - - HP NonStop (*-nsk*): compile --without-bash-malloc. Change from - Joachim Schmitz - - 9/16 - ---- -subst.c,execute_cmd.c,lib/glob/sm_loop.c,lib/sh/shquote.c - - minor code cleanups from Joachim Schmitz - -lib/readline/colors.h - - workaround for HP NonStop compiler issue with from - Joachim Schmitz - - 9/17 - ---- -builtins/printf.def - - printf_builtin: handle localtime returning NULL, as can happen when - encountering overflow. Bug report and initial fix from - Eduardo A. Bustamante López - -doc/{bash.1,bashref.texi} - - emphasize that brace expansion using character ranges ({a..c}) acts - as if the C locale were in use. Prompted by message from - Marcel Giannelia - - 9/20 - ---- -lib/sh/wcsnwidth.c - - wcsnwidth: new function, variant of wcwidth, returns the number of - wide characters from a string that will be displayed to not exceed - a specified max column position - - 9/21 - ---- -builtins/help.def - - show_builtin_command_help: break code that displays the short-doc - for each builtin in two columns into a new function: dispcolumn - - wdispcolumn: multibyte-char version of dispcolumn; uses wide - chars and printf "%ls" format. Fixes problem reported by - Nguyá»n Thái Ngá»c Duy - - 9/22 - ---- -execute_cmd.c - - execute_disk_command: before running the command-not-found hook, - call kill_current_pipeline() to make sure we don't add processes - to an existing pipeline or wait for processes erroneously - - 9/23 - ---- -lib/readline/input.c - - rl_input_available_hook: new hook function, called from - _rl_input_available (or _rl_input_queued) to return whether or not - input is available wherever the input source is - -lib/readline/doc/rltech.texi - - rl_input_available_hook: document - - 9/27 - ---- -lib/glob/sm_loop.c: - - GMATCH: after one or more `*', an instance of ?(x) can match zero or - 1 times (unlike ?, which has to match one character). The old code - failed if it didn't match at least once. Fixes `a*?(x)' bug. - - GMATCH: if we hit the end of the search string, but not the end of - the pattern, and the rest of the pattern is something that can - match the NUL at the end of the search string, we should successfully - match. Fixes `a*!(x)' bug reported by - - 10/2 - ---- -command.h - - add c_lock member to coproc structure for future use to tell who is - manipulating it - -execute_cmd.c - - execute_coproc: block SIGCHLD while parent is forking coproc - process and adding pid to sh_coproc struct to avoid race condition - where child is reaped before the pid is assigned and the coproc is - never marked as having died. Fixes race condition identified by - Davide Baldini - - add assignments to c_lock member of struct coproc in various - functions that manipulate it; was used to identify race condition - - coproc_pidchk: don't call coproc_dispose to avoid using malloc and - other functions in a signal handler context - - coproc_dispose: call BLOCK_SIGNAL/UNBLOCK_SIGNAL for SIGCHLD while - manipulating the sh_coproc struct - - 10/6 - ---- -lib/readline/complete.c - - rl_display_match_list: if printing completions horizontally, don't - bother with spacing calculations if limit == 1, which means we are - printing one completion per line no matter what. Fixes bug - reported by David Kaasen - - 10/7 - ---- -builtins/declare.def - - declare_internal: add error checking for nameref attribute and - variable assignments: self-references, attempts to make an array - variable a nameref - -subst.c - - parameter_brace_expand: handle parameter_brace_expand_word returning - &expand_param_fatal or &expand_param_error and return the appropriate - error value - - parameter_brace_expand_word: if a nameref variable's value is not a - valid identifier, return an error - - param_expand: if a nameref variable's value is not a valid identifier, - return an error - -test.c - - unary_operator: add new -R variable, returns true if variable is set - and has the nameref attribute. From ksh93 - -builtins/test.def - - add -R to description of conditional commands for help test - -doc/{bash.1,bashref.texi} - - document new -R unary conditional operator - - 10/13 - ----- -trap.c - - check_signals_and_traps: new function, convenience function for the - rest of the shell to check for pending terminating and interrupt - signals, and to check for and process any pending traps - - any_signals_trapped: new function, returns non-zero if any signals - are trapped and -1 if not - -trap.h - - extern declaration for check_signals_and_traps - -bashline.c - - bashline_reset: make sure we reset the event hook - - bash_event_hook: call check_signals_and_traps instead of just - checking for terminating signals so we can run pending traps and - react to interrupts, and reset the event hook when we're done - - - 10/14 - ----- -trap.c - - trap_handler: if executing in a readline signal handler context, - call bashline_set_event_hook to install bash_event_hook to process - the signal (if bash cares about it) - -sig.c - - sigint_sighandler: call bashline_set_event_hook to set the event - hook if we're executing in a readline signal handler context - -lib/readline/input.c - - rl_getc: call RL_CHECK_SIGNALS if read returns -1/EINTR and the caught - signal is SIGINT or SIGQUIT rather than waiting until the next time - around the loop - - rl_getc: call rl_event_hook after calling RL_CHECK_SIGNALS to allow - an application signal handler to set the event hook in its own - signal handler (e.g., like bash trap_handler or sigint_sighandler) - - -parse.y - - yy_readline_get: don't set interrupt_immediately before we call - readline(). Inspired by report from lanshun zhou - - -input.c - - getc_with_restart: add call to run_pending_traps after call to - CHECK_TERMSIG - -lib/sh/zread.c - - zread: call check_signals_and_traps if read() returns -1/EINTR - instead of just ignoring the EINTR and deferring handling any - signal that generated it - -builtins/mapfile.def - - mapfile: don't set interrupt_immediately before calling zgetline() - (which uses zread internally) - -builtins/read.def - - read_builtin: don't set interrupt_immediately before calling zread - (moved code around so that it was only being set right around calls - to zread to avoid signal handler conflicts). Inspired by report - from lanshun zhou - - edit_line: don't set interrupt_immediately around call to readline() - - include shmbutil.h - - read_builtin: don't call read_mbchar unless is_basic(c) returns - false for the character we just read - - 10/15 - ----- -sig.c - - throw_to_top_level: if interrupt_state is non-zero, make sure that - last_command_exit_value reflects 128+SIGINT if it's not already - greater than 128 - - 10/20 - ----- -builtins/wait.def - - WAIT_RETURN: set wait_signal_received back to 0 for the potential - next call to wait - -quit.h - - CHECK_WAIT_INTR: macro to check whether trap_handler handled a - signal and set wait_signal_received; longjmp to wait_intr_buf in - that case - -jobs.c - - wait_for, waitchld: call CHECK_WAIT_INTR at the same places we call - CHECK_TERMSIG to check for terminating signals - - wait_sigint_handler: don't longjmp out of the wait builtin unless - interrupt_immediately is set; otherwise just SIGRETURN from the - handler - - wait_sigint_handler: if interrupt_immediately not set, but we are - executing in the wait builtin and SIGINT is not trapped, treat it - as a `normally received' SIGINT: restore the signal handler and - send SIGINT to ourselves - - waitchld: when in posix mode and running SIGCHLD traps, don't longjmp - to wait_intr_buf (and let wait be interrupted) if we're running from - a signal handler. Wait for CHECK_WAIT_INTR to do the longjmp. - run_pending_traps will run the SIGCHLD trap later - -nojobs.c - - reap_zombie_children, wait_for_single_pid, wait_for: call - CHECK_WAIT_INTR where we call CHECK_TERMSIG - - wait_sigint_handler: don't longjmp out of the wait builtin unless - interrupt_immediately is set; otherwise just SIGRETURN from the - handler - -trap.c - - trap_handler: make sure wait_signal_received is set if the wait - builtin is executing, and only longjmp if interrupt_immediately is - set. This whole set of fixes was prompted by report from - lanshun zhou - - 10/24 - ----- -lib/glob/glob.c - - glob_filename: only check directory_name for globbing chars if - it's of non-zero length - -lib/sh/strchrnul.c - - new simpler implementation - -subst.c - - command_substitute: call set_shellopts after turning off errexit - in subshells so it's reflected in $SHELLOPTS - - 11/7 - ---- -builtins/evalstring.c - - parse_and_execute: treat ERREXIT case like reader_loop does: set - variable_context to 0 before longjmping back to top_level. Don't - run the unwind-protect context to avoid side effects from popping - function contexts. Part of fix for problem reported by Nikolai - Kondrashov - -execute_cmd.c - - execute_simple_command: call unlink_fifo_list only if this is the - last element of a pipeline (or not in a pipeline), rather than for - every child. Fixes difference in behavior between /dev/fd and - FIFOs reported by Zev Weiss - - execute_null_command: do the same thing in the parent branch after - make_child - - 11/14 - ----- -subst.c - - parameter_brace_expand: a variable is null if it's special ($@, $*), - the expansion occurs within double quotes, and the expansion turns - into a quoted null. Fixes debian bug 692447 reported by - Matrosov Dmitriy - -jobs.c - - run_sigchld_trap: make sure `running_trap' sentinel is set - appropriately - - waitchld: only run the sigchld trap if we're not in a signal - handler, not running a trap, and executing the wait builtin. - Otherwise, queue for later handling. We still run one instance - of the trap handler per exited child. Bulk of fix for bug - reported by Elliott Forney - -trap.c - - queue_sigchld_trap: set catch_flag so run_pending_traps notices, - and set trapped_signal_received for completeness. Rest of fix - for bug reported by Elliott Forney - -lib/malloc/malloc.c - - block_signals: renamed to _malloc_block_signals, made public - - unblock_signals: renamed to _malloc_unblock_signals, made public - -lib/malloc/imalloc.h - - extern declarations for _malloc_{un,}block_signals - -lib/malloc/table.c - - mregister_alloc, mregister_free: block signals around table - manipulation - - 11/15 - ----- -trap.c - - run_pending_traps: set SIG_INPROGRESS flag around calls to - run_sigchld_handler so other parts of the shell know that the - SIGCHLD trap handler is executing - - run_pending_traps: if we get a situation where we are looking at - running a SIGCHLD trap but the trap string is IMPOSSIBLE_TRAP_HANDLER - and the SIG_INPROGRESS flag is set, just skip it. This is possible - if run_pending_traps is called from a SIGCHLD trap handler run by - run_sigchld_trap - -doc/bash.1,lib/readline/doc/{rluser.texi,readline.3} - - corrected description of the effect of `set history-size 0'. Report - from Vesa-Matti J Kari - -include/stdc.h - - CPP_STRING: new define, replaces __STRING - -lib/malloc/{malloc.c,imalloc.h} - - replace __STRING with CPP_STRING - - 11/16 - ----- -lib/readline/bind.c - - sv_histsize: if argument evaluates to a value < 0, unstifle the - history - - 11/22 - ----- -redir.c - - do_redirection_internal: if we have REDIR_VARASSIGN set in the - redirection flags and we set up `redirector' using fcntl or dup2, - don't add a redirect to make sure it stays open. Let the - script programmer manage the file handle. Fixes bug reported by - Sam Liddicott - - 11/24 - ----- -jobs.c - - wait_for_any_job: new function, waits for an unspecified background - job to exit and returns its exit status. Returns -1 on no background - jobs or no children or other errors. Calls wait_for with new - sentinel value ANY_PID - - wait_for: changes to handle argument of ANY_PID: don't look up or - try to modify the child struct, only go through the wait loop once. - Return -1 if waitpid returns no children - -jobs.h - - ANY_PID: new define - -builtins/wait.def - - new option: -n. Means to wait for the next job and return its exit - status. Returns 127 if there are no background jobs (or no - children). Feature most recently requested by Elliott Forney - - -doc/{bash.1,bashref.texi} - - document new `wait -n' option - -execute_cmd.c - - execute_command_internal: save make_command_string () result in a - temp variable before calling savestring() on it; avoids evaluating - make_command_string() result twice. Fix from John E. Malmberg - - - 11/28 - ----- - -builtins/declare.def - - declare_internal: if an array variable is declared using `declare -a' - or `declare -A', but not assigned a value, set the `invisible' - attribute so the variable does not show up as set. Fix for bug - about variable initialization reported by Tim Friske - -builtins/{mapfile,read}.def - - after calling find_or_make_array_variable, make sure the invisible - flag is turned off, in case the variable was declared previously - using `declare -a' or `declare -A'. Side effect of above change to - declare_internal - -subst.c - - shell_expand_word_list: handle the W_ASSNGLOBAL flag and put -g into - the list of options passed to make_internal_declare as appropriate. - Fix for bug reported by Tim Friske - - 11/30 - ----- -test.c - - unary_op: make sure -v and -n check that the variable is not marked - as invisible before calling var_isset. Fix for bug reported by Tim - Friske - - 12/2 - ---- -subst.c - - process_substitute: turn off the `expanding_redir' flag, which - controls whether or not variables.c:find_variable_internal uses the - temporary environment to find variables. We want to use the - temp environment, since we don't have to worry about order of - evaluation in a subshell. Fixes bug reported by Andrey Borzenkov - - - 12/4 - ---- -lib/glob/glob.c - - glob_filename: changes to avoid null filenames and multiple entries - returned for patterns like **/** (globstar enabled). Fixes bug - reported by Ulf Magnusson - - 12/10 - ----- -lib/glob/glob.c - - glob_filename: finish up a series of changes to make globstar-style - globbing more efficient, avoid more duplicate filenames, and be more - compatible with other shells that implement it - o collapse a sequence of **/**/** to one ** - o note when the directory name is all ** or ends in ** so we - can treat it specially when the filename is ** - All inspired by report from Andrey Borzenkov - -lib/sh/zread.c - - zreadn: new function, like zread, but takes an additional argument - saying how many bytes to read into the local buffer. Can be used to - implement `read -N' without so many one-byte calls to zreadc. Code - from Mike Frysinger - - 12/12 - ----- -lib/glob/sm_loop.c - - PATSCAN (glob_patscan): if passed string already points to end of - pattern, return NULL immediately. Fixes problem with - extglob_skipname reported by Raphaël Droz - - 12/13 - ----- -execute_cmd.c - - execute_coproc: handle the command's exit status being inverted - (an oversight). Fixes bug reported by DJ Mills - and Andreas Schwab - - 12/14 - ----- -lib/readline/readline.c - - bind_arrow_keys_internal: add MINGW key bindings for Home, End, - Delete, and Insert keys. Fix from Pierre Muller - - -builtins/printf.def - - printf_builtin: '%()T' conversion: if there is no argument supplied, - behave as if -1 had been supplied (current time). ksh93-like feature - suggested by Clark Wang - -doc/{bash.1,bashref.texi} - - document new printf %()T default argument behavior - - 12/15 - ----- -lib/readline/display.c - - displaying_prompt_first_line: new variable, indicates whether or - not the first line of output is displaying the prompt. Always true - in normal mode, sometimes false in horizontal scrolling mode - - rl_redisplay: set displaying_prompt_first_line to true unless we - are in horizontal mode; set to false in horizontal mode if the left - margin of the displayed line is greater than the end of the prompt - string - - rl_redisplay: when in horizontal scroll mode, don't adjust - _rl_last_c_pos by the wrap offset unless the line is displaying - a prompt containing invisible chars - - update line: don't adjust _rl_last_c_pos by the wrap offset unless - the line is displaying a prompt containing invisible chars - - update_line: if shrinking the line by reducing the number of - displayed characters, but we have already moved the cursor to the - beginning of the line where the first difference starts, don't - try to delete characters - -builtins/read.def - - unbuffered_read: set to 2 if invoked as `read -N' - - if unbuffered_read is set to 2, compute the number of chars we - need to read and read that many with zreadn. Posix mode still - uses zreadintr. Code from Mike Frysinger - -doc/{bash.1,bashref.texi} - - read: make it clear that if read times out, it saves any input - read to that point into the variable arguments. Report from - Fiedler Roman - -subst.c - - command_substitute: change direct assignment of exit_immediately_on_error - to use change_flag ('e', FLAG_OFF) instead - -flags.c - - use errexit_flag as the variable modified by changes to the -e - option, reflect those changes to exit_immediately_on_error - -execute_cmd.c - - execute_builtin: new global variable, builtin_ignoring_errexit, set - to 0 by default and set to 1 if eval/source/command executing in a - context where -e should be ignored - - execute_builtin: set exit_immediately_on_error to errextit_flag - after executing eval/source/command in a context where -e should - be ignored - -flags.c - - if builtin_ignoring_errexit is set, changes to errexit_flag are - not reflected in the setting of exit_immediately_on_error. Fixes - bug reported by Robert Schiele - - 12/23 - ----- -include/posixjmp.h - - setjmp_nosigs: new define, call setjmp in such a way that it will - not manipulate the signal mask - -{expr,test,trap}.c - - setjmp_nosigs: call instead of setjmp; don't need to manipulate - signal mask - -builtins/read.def - - read_builtin: setjmp_nosigs: call instead of setjmp; don't need - to manipulate signal mask - -builtins/evalstring.c: - - parse_and_execute: setjmp_nosigs: call instead of setjmp; don't need - to manipulate signal mask - - parse_string: setjmp_nosigs: call instead of setjmp; don't need - to manipulate signal mask - - parse_and_execute: save and restore the signal mask if we get a - longjmp that doesn't cause us to return or exit (case DISCARD) - - 12/24 - ----- -general.c - - bash_tilde_expand: only set interrupt_immediately if there are no - signals trapped; we want to jump to top level if interrupted but - not run any trap commands - - 12/25 - ----- -jobs.c - - run_sigchld_trap: no longer set interrupt_immediately before calling - parse_and_execute, even if this is no longer run in a signal handler - context - -input.c - - getc_with_restart: add call to QUIT instead of CHECK_TERMSIG - -parse.y - - yy_stream_get: now that getc_with_restart calls QUIT, don't need to - set interrupt_immediately (already had call to run_pending_traps) - -execute_cmd.c - - execute_subshell_builtin_or_function,execute_function,execute_in_subshell: - setjmp_nosigs: call instead of setjmp when saving return_catch; don't - need to manipulate signal mask - - execute_subshell_builtin_or_function,execute_in_subshell: - setjmp_nosigs: call instead of setjmp where appropriate when saving - top_level; don't need to manipulate signal mask if we're going to - exit right away - -subst.c - - command_substitute: setjmp_nosigs: call instead of setjmp when saving - return_catch; don't need to manipulate signal mask - - command_substitute: setjmp_nosigs: call instead of setjmp where - appropriate when saving top_level; don't need to manipulate signal - mask if we're going to exit right away - -trap.c - - run_exit_trap: setjmp_nosigs: call instead of setjmp when saving - return_catch; don't need to manipulate signal mask - - run_exit_trap: setjmp_nosigs: call instead of setjmp where - appropriate when saving top_level; don't need to manipulate signal - mask if we're going to exit right away - - _run_trap_internal: setjmp_nosigs: call instead of setjmp when saving - return_catch; don't need to manipulate signal mask - -builtins/evalfile.c - - _evalfile: setjmp_nosigs: call instead of setjmp when saving - return_catch; don't need to manipulate signal mask - -builtins/evalstring.c - - evalstring: setjmp_nosigs: call instead of setjmp when saving - return_catch; don't need to manipulate signal mask - -shell.c - - main: setjmp_nosigs: call instead of setjmp where appropriate when - saving top_level; don't need to manipulate signal mask if we're - going to exit right away - - run_one_command: setjmp_nosigs: call instead of setjmp where - appropriate when saving top_level; don't need to manipulate signal - mask if we're going to exit right away - - run_wordexp: setjmp_nosigs: call instead of setjmp where - appropriate when saving top_level; don't need to manipulate signal - mask if we're going to exit right away - -eval.c - - reader_loop: save and restore the signal mask if we get a longjmp - that doesn't cause us to return or exit (case DISCARD) - - 12/26 - ----- -parse.y - - shell_input_line_{index,size,len}: now of type size_t; in some cases - the unsigned property makes a difference - - STRING_SAVER: saved_line_{size,index} now of type size_t - - shell_getc: don't allow shell_input_line to grow larger than SIZE_MAX; - lines longer than that are truncated until read sees a newline; - addresses theoretical buffer overflow described by Paul Eggert - - - set_line_mbstate: size_t changes like shell_getc - - shell_getc: if shell_input_line is larger than 32K, free it and - start over to avoid large memory allocations sticking around - -variables.c - - bind_global_variable: new function, binds value to a variable in - the global shell_variables table - -variables.h - - bind_global_variable: new extern declaration - -builtins/declare.def - - declare_internal: if -g given with name=value, but variable is not - found in the global variable table, make sure to call - bind_global_variable so the variable is created and modified at - global scope. Fixes a bug where declare -g x=y could modify `x' - at a previous function scope - -command.h - - W_ASSIGNARRAY: new word flag, compound indexed array assignment - -subst.h - - ASS_MKGLOBAL: new assignment flag, forcing global assignment even in - a function context, used by declare -g - -execute_cmd.c - - fix_assignment_words: set W_ASSIGNARRAY flag if -a option given to - declaration builtin - -subst.c - - do_assignment_internal: explicitly handle case where we are - executing in a function and we want to create a global array or - assoc variable - - shell_expand_word_list: call make_internal_declare if -a option - given to declaration builtin (W_ASSIGNARRAY); handle -g option with - it (W_ASSNGLOBAL). Fixes inconsistency noticed by Vicente Couce - Diaz , where declare -ag foo=(bar) could modify - array variable foo at previous function scope, not global scope - - 12/27 - ----- -bashline.c - - Minix needs the third argument to tputs to be a void funtion taking - an int argument, not an int-returning function. Fix from - John E. Malmberg as part of VMS bash port - - 12/29 - ----- -configure.ac,version.c,patchlevel.h - - bash-4.3-devel: new version, new shell compatibility level (43) - -subst.c - - parameter_brace_patsub: put the bash-4.2 code back in from the - change of 3/3 that runs the replacement string through quote - removal, make it dependent on shell_compatibility_level <= 42 - -builtins/shopt.def - - compat42: new shopt option - - set_compatibility_level: change logic to set and unset various - compat variables and shell_compatibility_level - -COMPAT - - new documentation for bash-4.3 compatibility changes - -doc/{bash.1,bashref.texi} - - compat42: document new shopt option - -builtins/shopt.def - - set_compatibility_opts: new function, sets the various shopt - compat variables based on the value of shell_compatibility_level - -builtins/common.h - - set_compatibility_opts: new extern declaration - -variables.c - - BASH_COMPAT: new special variable; sets the shell compatibility - level. Accepts values in decimal (4.2) or integer (42) form; - Unsetting variable, setting it to empty string, or setting it to - out-of-range value sets the shell's compatibility level to the - default for the current version. Valid values are 3.1/31 through - the current version - - sv_shcompat: new function implementing logic for BASH_COMPAT - -variables.h - - sv_shcompat: new extern declaration - -doc/{bash.1,bashref.texi} - - BASH_COMPAT: description of new variable - -lib/readline/complete.c - - _rl_colored_stats: default back to 0 for 4.3 release branch - - 1/5/2013 - -------- -quit.h - - remove spurious call to itrace in CHECK_WAIT_INTR - -bashline.c - - bash_event_hook: if we're going to jump to top_level, make sure we - clean up after readline() by calling rl_cleanup_after_signal(). - Fixes bug reported against devel branch by Raphaël Droz - - - bash_event_hook: reset the event hook before checking for signals - or traps in case we longjmp - -doc/{bash.1,bashref.texi} - - small additions to the set -e section to make it more clear that - contexts where -e is ignored extend to compound commands as well - as shell functions - -lib/readline/readline.h - - rl_signal_event_hook: new extern declaration - -lib/readline/input.c - - rl_signal_event_hook: new variable, hook function to call when a - function (currently just read(2)) is interrupted by a signal and - not restarted - - rl_getc: call rl_signal_event_hook instead of rl_event_hook - -lib/readline/doc/rltech.texi - - rl_signal_event_hook: document new function - -bashline.c - - changes to set rl_signal_event_hook instead of rl_event_hook - -lib/readline/readline.h - - change readline version numbers to 6.3 - - 1/6 - --- -doc/{bash.1,bashref.texi} - - a couple of changes to the descriptions of the ERR trap and its - effects based on a message from Rob Nagler - - 1/9 - --- -expr.c - - expassign: invalidate curlval before freeing and NULLing tokstr to - avoid aliasing issues. Fixes bug reported by Eduardo A. Bustamante - López and Dan Douglas - -braces.c - - array_concat: don't be so aggressive in trying to short-circuit. We - can only short-circuit if we have a single-element array where the - element is an empty string (array[0] == "" array[1] = 0x0). Existing - practice requires us to replicate arrays and prefix or append empty - strings. Fixes bug reported by Eduardo A. Bustamante López - - - 1/11 - ---- -execute_cmd.c - - execute_builtin: since mapfile uses evalstring() to run its callbacks - internally, just like eval, so it needs to handle the case where the - temp environment given to mapfile persists throughout the entire - set of callback commands. This might be a problem with trap also, but - trap isn't run in the same way. Fixes bug reported by Dan Douglas - - - 1/13 - ---- -redir.c - - redirection_error: before expanding the redirection word (if - expandable_redirection_filename returns true), disable command - substitution during expansion. Fixes bug reported by Dan Douglas - - -subst.c - - expand_word_internal: case '\\': if the next character is an IFS - character, and the expansion occurs within double quotes, and the - character is not one for which backslash retains its meaning, add - the (escaped) '\' and the (escaped) character. Fixes bug reported - by Dan Douglas - - 1/15 - ---- -builtins/cd.def - - cd_builtin: make sure call to internal_getopt handles -e option. - Fixes bug reported by - - 1/17 - ---- -subst.c - - expand_word_list_internal: make sure tempenv_assign_error is - initialized to 0 - -execute_cmd.c - - execute_simple_command: make sure tempenv_assign_error is reset to 0 - after it's tested to see if an error should force the shell to exit. - Fixes problem where a the failure of a tempenv assignment preceding - a non-special builtin `sticks' and causes the next special builtin - to exit the shell. From a discussion on bug-bash started by - douxin - - 1/20 - ---- -subst.c - - parameter_brace_expand_rhs: call stupidly_hack_special_variables - after assigning with ${param[:]=word} even if IFS is changing. - Suggested by Dan Douglas [TENTATIVE, needs work - on IFS side effects] - -command.h - - W_GLOBEXP (which was unused) is now W_SPLITSPACE (which isn't used - yet) - -{execute_cmd,subst,variables}.c - - removed all code that mentioned W_GLOBEXP - - removed mention of gnu_argv_flags and code that set it - - 1/22 - ---- -subst.c - - param_expand: set W_SPLITSPACE if we expand (unquoted) $* and - IFS is unset or null so we can be sure to split this on spaces - no matter what happens with IFS later - - expand_word_internal: note that param_expand returns W_SPLITSPACE - in the returned word flags and keep track of that state with - `split_on_spaces' - - 1/23 - ---- -subst.c - - expand_word_internal: if split_on_spaces is non-zero, make sure - we split `istring' on spaces and return the resultant word. The - previous expansions should have quoted spaces in the positional - parameters where necessary. Suggested by Dan Douglas - - -execute_cmd.c - - execute_command_internal: make sure any subshell forked to run a - group command or user subshell at the end of a pipeline runs any - EXIT trap it sets. Fixes debian bash bug 698411 - http://bugs.debian.org/cgi-big/bugreport.cgi?bug=698411 - -subst.c - - shell_expand_word_list: fix code that creates args for and calls - make_internal_declare to avoid calling it twice (missing `else' - in 12/26 change) - - do_assignment_internal: fix code from 12/26 change to fix problem - where an existing assoc variable could be converted to an array - without checking `mkassoc' - - 1/24 - ---- -builtins/evalfile.c - - _evalfile: add missing `close (fd)' calls before returning to - avoid fd leaks. Bug and fix from Roman Rakus - - 1/25 - ---- -builtins/read.def - - read_builtin: don't try to play tricks with the top of the unwind- - protect stack after read gets a SIGALRM; save input_string to new - memory, run the stack, then restore input_string and assign the - variables. Part of fix for bug reported by konsolebox - ; the rest of the fix is with the changes in - trap and signal handling and doing away with interrupt_immediately - - 1/26 - ---- -redir.c - - redirection_expand, write_here_string, write_here_document: before - calling any of the word expansion functions, after setting - expanding_redir to 1 (which bypasses the temp environment in the - variable lookup functions), call sv_ifs to reset the cached IFS- - related variables set by subst.c:setifs(). This ensures that - redirections will not get any IFS values that are set in the - temporary environment, as Posix specifies. Then, after the word - expansions, after resetting expanding_redir to 0, call sv_ifs - again to make sure the cached IFS values are set from any - assignments in the temporary environment. We force executing_builtin - to 1 to `fool' the variable lookup functions into using any temp - environment, then reset it to its old value after sv_ifs returns. - This is what allows read() to use the (cached) IFS variables set - in the temp environment. Fixes inconsistency reported by Dan Douglas - - - 1/29 - ---- -lib/readline/display.c - - update_line: fix off-by-one error when updating vis_lbreaks array - in a multibyte locale that occurs when moving multibyte chars from - one line down to another. Bug report and fix from Egmont - Koblinger - - 1/30 - ---- -configure.ac - - changed version to 4.3-alpha - -redir.c - - redir_open: handle open returning -1/EINTR, which seems to happen - a lot with FIFOs and SIGCHLD, and call QUIT to handle other - signals that can interrupt open(2). Bug report and initial fix - from Mike Frysinger - - 1/31 - ---- -subst.c - - parameter_brace_expand: make sure to propagate the PF_ASSIGNRHS flag - to parameter_brace_expand_word - - parameter_brace_expand_word: make sure that if the PF_ASSIGNRHS flag - is set and we are expanding ${a[@]} or ${a[*]} we set quoted to - include Q_DOUBLE_QUOTES before calling array_value_internal, mirroring - what we do for $@ and $*. Fixes inconsistency reported by Dan - Douglas - -configure.ac - - use AC_CHECK_TOOL instead of AC_CHECK_PROG to check for ar, since it - will find $host-prefixed versions of utilities. Report and fix from - Mike Frysinger - -builtins/setattr.def - - set_var_attribute: check whether bind_variable (called when the - variable whose attributes are being modified is found in the temp - environment) just modified a read-only global variable, and don't - bother marking the temporary variable for propagation if so. The - propagation is superfluous and will result in a strange error - message - - 2/2 - --- -variables.c - - initialize_shell_variables: don't try to import function definitions - with invalid names from the environment if already in posix mode, - but create them as (invisible) exported variables so they pass - through the environment. Print an error message so user knows - what's wrong. Fixes bug reported by Tomas Trnka - - 2/9 - --- - -builtins/read.def - - sigalrm_seen, alrmbuf: now global so the rest of the shell (trap.c) - can use them - - sigalrm: just sets flag, no longer longjmps to alrmbuf; problem was - longjmp without manipulating signal mask, leaving SIGALRM blocked - -quit.h - - move CHECK_ALRM macro here from builtins/read.def so trap.c: - check_signals() can call it - -trap.c - - check_signals: add call to CHECK_ALRM before QUIT - - check_signals_and_traps: call check_signals() instead of including - CHECK_ALRM and QUIT inline. Integrating check for read builtin's - SIGALRM (where zread call to check_signals_and_traps can see it) - fixes problem reported by Mike Frysinger - - 2/12 - ---- -lib/glob/xmbsrtowcs.c - - xdupmbstowcs2: fixed but where end of string was not handled - correctly, causing loop to go past end of string in a bunch of cases. - Fixes bug reported by "Dashing" - - - 2/13 - ---- -builtins/pushd.def - - popd_builtin: treat any argument that isn't -n or of the form - [-+][[:digit:]]* as an error. Fixes problem reported by Bruce - Korb - - 2/14 - ---- -configure.ac - - add check for sig_atomic_t; already a placeholder for it in - config.h.in - - 2/15 - ---- -subst.c - - do_compound_assignment: don't call assign_compound_array_list with - a NULL variable in case make_local_xxx_variable returns NULL - (it will if you try to shadow a readonly or noassign variable). - Fixes bug reported by Richard Tollerton - - 2/16 - ---- -variables.c - - make_local_variable: print error messager if an attempt is made to - create a local variable shadowing a `noassign' variable. Previously - we just silently refused to do it - -trap.[ch] - - get_original_signal: now global so rest of the shell can use it - -sig.c - - initialize_shell_signals: install a signal handler for SIGTERM - that does nothing except set a sigterm_received flag instead of - ignoring it with SIG_IGN, as long as SIGTERM is not ignored when - the shell is started. Use get_original_signal early to get the - original handler, since we will do that later anyway - - set_signal_handler: if installing sigterm_sighandler as the SIGTERM - handler, make sure to add SA_RESTART flag to make it as close to - SIG_IGN as possible - -sig.h - - sigterm_sighandler: new extern declaration - -quit.h - - RESET_SIGTERM: set sigterm_receved to 0 - - CHECK_SIGTERM: check sigterm_received; if it's non-zero, treat it - as a fatal signal and call termsig_handler to exit the shell - -jobs.c - - make_child: call RESET_SIGTERM just before fork() so we can detect - if the child process received a SIGTERM before it's able to change - the signal handler back to what it was when the shell started - (presumably SIG_DFL). Only has effect if the shell installed - sigterm_sighandler for SIGTERM, interactive shells that were not - started with SIG_IGN as the SIGTERM handler - - make_child: call RESET_SIGTERM in the parent after fork() so the - rest of the shell won't react to it - -execute_cmd.c - - execute_simple_command: call CHECK_SIGTERM after make_child in child - to catch SIGTERM received after fork() and before restoring old - signal handlers - - execute_disk_command: call CHECK_SIGTERM after make_child in child - process after restoring old signal handlers and again just before - calling shell_execve. Fixes race condition observed by - Padraig Brady when testing with his `timeout' - program - -lib/readline/display.c - - open_some_spaces: new function, subset of insert_some_chars that just - opens up a specified number of spaces to be overwritten - - insert_some_spaces: now just calls to open_some_spaces followed by - _rl_output_some_chars - - update_line: use col_temp instead of recalculating it using - _rl_col_width in the case where we use more columns with fewer bytes - - update_line: use open_some_spaces and then output the right number - of chars instead of trying to print new characters then overwrite - existing characters in two separate calls. This includes removing - some dodgy code and making things simpler. Fix from Egmont - Koblinger - - use new variable `bytes_to_insert' instead of overloading temp in - some code blocks (nls - nfd, bytes that comprise the characters - different in the new line from the old) - - 2/18 - ---- -redir.c - - do_redirection_internal: add undoable redirection for the implicit - close performed by the <&n- and >&n- redirections. Fixes bug - reported by Stephane Chazelas - - 2/19 - ---- -sig.c - - termsig_handler: an interactive shell killed by SIGHUP and keeping - command history will try to save the shell history before exiting. - This is an attempt to preserve the save-history-when-the-terminal- - window-is-closed behavior - - 2/21 - ---- -braces.c - - brace_expand: if a sequence expansion fails (e.g. because the - integers overflow), treat that expansion as a simple string, including - the braces, and try to process any remainder of the string. The - remainder may include brace expansions. Derived from SuSE bug - 804551 example (https://bugzilla.novell.com/show_bug.cgi?id=804551) - - 2/23 - ---- -{quit,sig}.h,sig.c - - sigterm_received declaration now in sig.h; type is sig_atomic_t - - sigwinch_received type now sig_atomic_t - - sig.h includes bashtypes.h and if SIG_DFL not defined - (same logic as trap.h) to pick up sig_atomic_t - -unwind_prot.c - - include sig.h before quit.h (reverse order) - - 2/27 - ---- -builtins/shopt.def - - reset_shopt_options: make sure check_window_size is reset to the - default from config.h, not unconditionally to 0 - -jobs.[ch] - - last_made_pid, last_asynchronous_pid: now volatile. Change from SuSE - -jobs.c - - wait_for: if we're using sigaction to install a handler for SIGCHLD, - make sure we specify SA_RESTART - -lib/{tilde,readline}/shell.c - - get_home_dir: instead of looking in the password file every time, - look once and cache the result - -sig.[ch] - - sigwinch_received, sigterm_received: now `volatile' qualified - -sig.c,quit.h - - interrupt_state,terminating_signal: now sig_atomic_t - - 3/1 - --- -MANIFEST,examples/* - - removed around 120 files without FSF copyrights; requested by - Karl Berry in early January - - 3/2 - --- -lib/malloc/malloc.c - - morecore: only check whether SIGCHLD is trapped if SIGCHLD is defined - -doc/bashref.texi - - Fixed most of the examples in the GNU Parallel section to use better - shell idioms following complaints on bug-bash; added a couple of - examples and smoothed out the text - -quit.h - - include "sig.h" for sig_atomic_t - -lib/readline/display.c - - update_line: when inserting one or more characters at the end of - the display line in a non-multibyte environment, just write from the - first difference to the end of the line and return. We don't have - to adjust _rl_last_c_pos. This is needed to adjust from the old - two-part copy to a single call to _rl_output_some_chars (change of - 2/16) - - 3/4 - --- -Makefile.in,doc/Makefile.in - - PACKAGE_TARNAME, docdir: new variables substituted by autoconf - - OTHER_DOCS,OTHER_INSTALLED_DOCS: new variables with auxiliary - documentation files to be installed into $(docdir) - - install: add new rule to install $(OTHER_DOCS) - - uninstall: add new rule to uninstall $(docdir)/$(OTHER_INSTALLED_DOCS) - -doc/bash.1 - - add URL to `POSIX' file in `SEE ALSO' section; put pointer to that - section in --posix and set -o posix descriptions - -examples/ - - removed around 110 examples at the request of the FSF due to copyright - issues - - 3/5 - --- -builtins/setattr.def - - readonly: modified help text slightly to make it clearer that - functions aren't changed or displayed unless the -f option is given. - Report from - - 3/9 - --- -include/typemax.h - - SIZE_MAX: define to 65535 (Posix minimum maximum) if not defined - -parse.y - - include "typemax.h" for possible SIZE_MAX definition, make sure we - include it after shell.h - -{braces,expr}.c - - include "typemax.h" for possible INTMAX_MIN and INTMAX_MAX definitions - - 3/10 - ---- -bashline.c - - bash_default_completion: make sure completion type of `!' (same as - TAB but with show-all-if-ambiguous set) and glob-word-completion - sets rl_filename_completion_desired to 0 so extra backslashes don't - get inserted by `quoting' the completion. We can't kill all the - matches because show-all-if-ambiguous needs them. Bug report from - Marcel (Felix) Giannelia - -[bash-4.3-alpha frozen] - - 3/14 - ---- -general.c - - trim_pathname: use memmove instead of memcpy since the source and - destination pathnames may overlap. Report and fix from Matthew - Riley - - 3/18 - ---- -configure.ac - - socklen_t is defined as `unsigned int' if configure can't find it - - 3/20 - ---- -lib/readline/complete.c - - S_ISVTX: since it's not defined on all platforms (Minix), make sure - its use is protected with #ifdef - - 3/21 - ---- -doc/{bash.1,bashref.texi} - - Added mention of ${!name[@]} and ${!name[*]} expansions to get all - indices of an array. Suggested by Jonathan Leffler - - - 3/24 - ---- -subst.h - - SD_IGNOREQUOTE: new define for skip_to_delim; if set, means that - single quotes (for now) will be treated as ordinary characters - -subst.c - - skip_to_delim: handle SD_IGNOREQUOTE. no callers use it for now - - 3/25 - ---- -support/config.{guess,sub} - - updated to versions from autoconf-2.69 diff --git a/CWRU/POSIX.NOTES.old b/CWRU/POSIX.NOTES.old deleted file mode 100644 index 1707ab10c..000000000 --- a/CWRU/POSIX.NOTES.old +++ /dev/null @@ -1,82 +0,0 @@ -Starting bash with the `--posix' command-line option or executing -`set -o posix' while bash is running will cause bash to conform more -closely to the Posix.2 standard by changing the behavior to match that -specified by Posix.2 in areas where the bash default differs. - -The following list is what's changed when `posix mode' is in effect: - -1. When a command in the hash table no longer exists, bash will re-search - $PATH to find the new location. This is also available with - `shopt -s checkhash'. - -2. The >& redirection does not redirect stdout and stderr. - -3. The message printed by the job control code and builtins when a job - exits with a non-zero status is `Done(status)'. - -4. Reserved words may not be aliased. - -5. The Posix.2 PS1 and PS2 expansions of `!' -> history number and - `!!' -> `!' are enabled, and parameter expansion is performed on - the value regardless of the setting of the `promptvars' option. - -6. Interactive comments are enabled by default. (Note that bash has - them on by default anyway.) - -7. The Posix.2 startup files are executed ($ENV) rather than the normal - bash files. - -8. Tilde expansion is only performed on assignments preceding a command - name, rather than on all assignment statements on the line. - -9. The default history file is ~/.sh_history (default value of $HISTFILE). - -10. The output of `kill -l' prints all the signal names on a single line, - separated by spaces. - -11. Non-interactive shells exit if `file' in `. file' is not found. - -12. Redirection operators do not perform pathname expansion on the word - in the redirection unless the shell is interactive - -13. Function names must be valid shell identifiers. That is, they may not - contain characters other than letters, digits, and underscores, and - may not start with a digit. Declaring a function with an illegal name - causes a fatal syntax error in non-interactive shells. - -14. Posix.2 `special' builtins are found before shell functions during command - lookup. - -15. If a Posix.2 special builtin returns an error status, a non-interactive - shell exits. The fatal errors are those listed in the POSIX.2 standard, - and include things like passing incorrect options, redirection errors, - variable assignment errors for assignments preceding the command name, - and so on. - -16. The environment passed to executed commands is not sorted. Neither is - the output of `set'. This is not strictly Posix.2 behavior, but sh - does it this way. Ksh does not. It's not necessary to sort the - environment; no program should rely on it being sorted. - -17. If the `cd' builtin finds a directory to change to using $CDPATH, the - value it assigns to $PWD does not contain any symbolic links, as if - `cd -P' had been executed. - -18. A non-interactive shell exits with an error status if a variable - assignment error occurs when no command name follows the assignment - statements. A variable assignment error occurs, for example, when - trying to assign a value to a read-only variable. - -19. A non-interactive shell exits with an error status if the iteration - variable in a for statement or the selection variable in a select - statement is a read-only variable. - -20. Process substitution is not available. - -21. Assignment statements preceding POSIX.2 `special' builtins persist in - the shell environment after the builtin completes. - -There is other Posix.2 behavior that bash does not implement. Specifically: - -1. Assignment statements affect the execution environment of all builtins, - not just special ones. diff --git a/CWRU/old/set.def.save b/CWRU/old/set.def.save deleted file mode 100644 index 87b78d7cc..000000000 --- a/CWRU/old/set.def.save +++ /dev/null @@ -1,544 +0,0 @@ -This file is set.def, from which is created set.c. -It implements the "set" and "unset" builtins in Bash. - -Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc. - -This file is part of GNU Bash, the Bourne Again SHell. - -Bash is free software; you can redistribute it and/or modify it under -the terms of the GNU General Public License as published by the Free -Software Foundation; either version 1, or (at your option) any later -version. - -Bash is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -for more details. - -You should have received a copy of the GNU General Public License along -with Bash; see the file COPYING. If not, write to the Free Software -Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -$PRODUCES set.c - -#include -#include "../shell.h" -#include "../flags.h" - -#include "bashgetopt.h" - -extern int interactive; -extern int noclobber, posixly_correct; -#if defined (READLINE) -extern int rl_editing_mode, no_line_editing; -#endif /* READLINE */ - -$BUILTIN set -$FUNCTION set_builtin -$SHORT_DOC set [--abefhkmnptuvxldBCHP] [-o option] [arg ...] - -a Mark variables which are modified or created for export. - -b Notify of job termination immediately. - -e Exit immediately if a command exits with a non-zero status. - -f Disable file name generation (globbing). - -h Locate and remember function commands as functions are - defined. Function commands are normally looked up when - the function is executed. - -i Force the shell to be an "interactive" one. Interactive shells - always read `~/.bashrc' on startup. - -k All keyword arguments are placed in the environment for a - command, not just those that precede the command name. - -m Job control is enabled. - -n Read commands but do not execute them. - -o option-name - Set the variable corresponding to option-name: - allexport same as -a - braceexpand same as -B -#if defined (READLINE) - emacs use an emacs-style line editing interface -#endif /* READLINE */ - errexit same as -e - histexpand same as -H - ignoreeof the shell will not exit upon reading EOF - interactive-comments - allow comments to appear in interactive commands - monitor same as -m - noclobber disallow redirection to existing files - noexec same as -n - noglob same as -f - nohash same as -d - notify save as -b - nounset same as -u - physical same as -P - posix change the behavior of bash where the default - operation differs from the 1003.2 standard to - match the standard - privileged same as -p - verbose same as -v -#if defined (READLINE) - vi use a vi-style line editing interface -#endif /* READLINE */ - xtrace same as -x - -p Turned on whenever the real and effective user ids do not match. - Disables processing of the $ENV file and importing of shell - functions. Turning this option off causes the effective uid and - gid to be set to the real uid and gid. - -t Exit after reading and executing one command. - -u Treat unset variables as an error when substituting. - -v Print shell input lines as they are read. - -x Print commands and their arguments as they are executed. - -l Save and restore the binding of the NAME in a FOR command. - -d Disable the hashing of commands that are looked up for execution. - Normally, commands are remembered in a hash table, and once - found, do not have to be looked up again. -#if defined (BRACE_EXPANSION) - -B the shell will perform brace expansion -#endif /* BRACE_EXPANSION */ -#if defined (BANG_HISTORY) - -H Enable ! style history substitution. This flag is on - by default. -#endif /* BANG_HISTORY */ - -C If set, disallow existing regular files to be overwritten - by redirection of output. - -P If set, do not follow symbolic links when executing commands - such as cd which change the current directory. - -Using + rather than - causes these flags to be turned off. The -flags can also be used upon invocation of the shell. The current -set of flags may be found in $-. The remaining n ARGs are positional -parameters and are assigned, in order, to $1, $2, .. $n. If no -ARGs are given, all shell variables are printed. -$END - -/* An a-list used to match long options for set -o to the corresponding - option letter. */ -struct { - char *name; - int letter; -} o_options[] = { - { "allexport", 'a' }, -#if defined (BRACE_EXPANSION) - { "braceexpand",'B' }, -#endif - { "errexit", 'e' }, - { "histexpand", 'H' }, - { "monitor", 'm' }, - { "noexec", 'n' }, - { "noglob", 'f' }, - { "nohash", 'd' }, -#if defined (JOB_CONTROL) - { "notify", 'b' }, -#endif /* JOB_CONTROL */ - {"nounset", 'u' }, - {"physical", 'P' }, - {"privileged", 'p' }, - {"verbose", 'v' }, - {"xtrace", 'x' }, - {(char *)NULL, 0}, -}; - -#define MINUS_O_FORMAT "%-15s\t%s\n" - -void -list_minus_o_opts () -{ - register int i; - char *on = "on", *off = "off"; - - printf (MINUS_O_FORMAT, "noclobber", (noclobber == 1) ? on : off); - - if (find_variable ("ignoreeof") || find_variable ("IGNOREEOF")) - printf (MINUS_O_FORMAT, "ignoreeof", on); - else - printf (MINUS_O_FORMAT, "ignoreeof", off); - - printf (MINUS_O_FORMAT, "interactive-comments", - interactive_comments ? on : off); - - printf (MINUS_O_FORMAT, "posix", posixly_correct ? on : off); - -#if defined (READLINE) - if (no_line_editing) - { - printf (MINUS_O_FORMAT, "emacs", off); - printf (MINUS_O_FORMAT, "vi", off); - } - else - { - /* Magic. This code `knows' how readline handles rl_editing_mode. */ - printf (MINUS_O_FORMAT, "emacs", (rl_editing_mode == 1) ? on : off); - printf (MINUS_O_FORMAT, "vi", (rl_editing_mode == 0) ? on : off); - } -#endif /* READLINE */ - - for (i = 0; o_options[i].name; i++) - { - int *on_or_off, zero = 0; - - on_or_off = find_flag (o_options[i].letter); - if (on_or_off == FLAG_UNKNOWN) - on_or_off = &zero; - printf (MINUS_O_FORMAT, o_options[i].name, (*on_or_off == 1) ? on : off); - } -} - -set_minus_o_option (on_or_off, option_name) - int on_or_off; - char *option_name; -{ - int option_char = -1; - - if (STREQ (option_name, "noclobber")) - { - if (on_or_off == FLAG_ON) - bind_variable ("noclobber", ""); - else - unbind_variable ("noclobber"); - stupidly_hack_special_variables ("noclobber"); - } - else if (STREQ (option_name, "ignoreeof")) - { - unbind_variable ("ignoreeof"); - unbind_variable ("IGNOREEOF"); - if (on_or_off == FLAG_ON) - bind_variable ("IGNOREEOF", "10"); - stupidly_hack_special_variables ("IGNOREEOF"); - } - -#if defined (READLINE) - else if ((STREQ (option_name, "emacs")) || (STREQ (option_name, "vi"))) - { - if (on_or_off == FLAG_ON) - { - rl_variable_bind ("editing-mode", option_name); - - if (interactive) - with_input_from_stdin (); - no_line_editing = 0; - } - else - { - int isemacs = (rl_editing_mode == 1); - if ((isemacs && STREQ (option_name, "emacs")) || - (!isemacs && STREQ (option_name, "vi"))) - { - if (interactive) - with_input_from_stream (stdin, "stdin"); - no_line_editing = 1; - } - else - builtin_error ("not in %s editing mode", option_name); - } - } -#endif /* READLINE */ - else if (STREQ (option_name, "interactive-comments")) - interactive_comments = (on_or_off == FLAG_ON); - else if (STREQ (option_name, "posix")) - { - posixly_correct = (on_or_off == FLAG_ON); - unbind_variable ("POSIXLY_CORRECT"); - unbind_variable ("POSIX_PEDANTIC"); - if (on_or_off == FLAG_ON) - { - bind_variable ("POSIXLY_CORRECT", ""); - stupidly_hack_special_variables ("POSIXLY_CORRECT"); - } - } - else - { - register int i; - for (i = 0; o_options[i].name; i++) - { - if (STREQ (option_name, o_options[i].name)) - { - option_char = o_options[i].letter; - break; - } - } - if (option_char == -1) - { - builtin_error ("%s: unknown option name", option_name); - return (EXECUTION_FAILURE); - } - if (change_flag (option_char, on_or_off) == FLAG_ERROR) - { - bad_option (option_name); - return (EXECUTION_FAILURE); - } - } - return (EXECUTION_SUCCESS); -} - -/* Set some flags from the word values in the input list. If LIST is empty, - then print out the values of the variables instead. If LIST contains - non-flags, then set $1 - $9 to the successive words of LIST. */ -set_builtin (list) - WORD_LIST *list; -{ - int on_or_off, flag_name, force_assignment = 0; - - if (!list) - { - SHELL_VAR **vars; - - vars = all_shell_variables (); - if (vars) - { - print_var_list (vars); - free (vars); - } - - vars = all_shell_functions (); - if (vars) - { - print_var_list (vars); - free (vars); - } - - return (EXECUTION_SUCCESS); - } - - /* Check validity of flag arguments. */ - if (*list->word->word == '-' || *list->word->word == '+') - { - register char *arg; - WORD_LIST *save_list = list; - - while (list && (arg = list->word->word)) - { - char c; - - if (arg[0] != '-' && arg[0] != '+') - break; - - /* `-' or `--' signifies end of flag arguments. */ - if (arg[0] == '-' && - (!arg[1] || (arg[1] == '-' && !arg[2]))) - break; - - while (c = *++arg) - { - if (find_flag (c) == FLAG_UNKNOWN && c != 'o') - { - char s[2]; - s[0] = c; s[1] = '\0'; - bad_option (s); - if (c == '?') - builtin_usage (); - return (c == '?' ? EXECUTION_SUCCESS : EXECUTION_FAILURE); - } - } - list = list->next; - } - list = save_list; - } - - /* Do the set command. While the list consists of words starting with - '-' or '+' treat them as flags, otherwise, start assigning them to - $1 ... $n. */ - while (list) - { - char *string = list->word->word; - - /* If the argument is `--' or `-' then signal the end of the list - and remember the remaining arguments. */ - if (string[0] == '-' && (!string[1] || (string[1] == '-' && !string[2]))) - { - list = list->next; - - /* `set --' unsets the positional parameters. */ - if (string[1] == '-') - force_assignment = 1; - - /* Until told differently, the old shell behaviour of - `set - [arg ...]' being equivalent to `set +xv [arg ...]' - stands. Posix.2 says the behaviour is marked as obsolescent. */ - else - { - change_flag ('x', '+'); - change_flag ('v', '+'); - } - - break; - } - - if ((on_or_off = *string) && - (on_or_off == '-' || on_or_off == '+')) - { - int i = 1; - while (flag_name = string[i++]) - { - if (flag_name == '?') - { - builtin_usage (); - return (EXECUTION_SUCCESS); - } - else if (flag_name == 'o') /* -+o option-name */ - { - char *option_name; - WORD_LIST *opt; - - opt = list->next; - - if (!opt) - { - list_minus_o_opts (); - continue; - } - - option_name = opt->word->word; - - if (!option_name || !*option_name || (*option_name == '-')) - { - list_minus_o_opts (); - continue; - } - list = list->next; /* Skip over option name. */ - - if (set_minus_o_option (on_or_off, option_name) != EXECUTION_SUCCESS) - return (EXECUTION_FAILURE); - } - else - { - if (change_flag (flag_name, on_or_off) == FLAG_ERROR) - { - char opt[3]; - opt[0] = on_or_off; - opt[1] = flag_name; - opt[2] = '\0'; - bad_option (opt); - builtin_usage (); - return (EXECUTION_FAILURE); - } - } - } - } - else - { - break; - } - list = list->next; - } - - /* Assigning $1 ... $n */ - if (list || force_assignment) - remember_args (list, 1); - return (EXECUTION_SUCCESS); -} - -$BUILTIN unset -$FUNCTION unset_builtin -$SHORT_DOC unset [-f] [-v] [name ...] -For each NAME, remove the corresponding variable or function. Given -the `-v', unset will only act on variables. Given the `-f' flag, -unset will only act on functions. With neither flag, unset first -tries to unset a variable, and if that fails, then tries to unset a -function. Some variables (such as PATH and IFS) cannot be unset; also -see readonly. -$END - -#define NEXT_VARIABLE() any_failed++; list = list->next; continue; - -unset_builtin (list) - WORD_LIST *list; -{ - int unset_function, unset_variable, unset_array, opt, any_failed; - char *name; - - unset_function = unset_variable = unset_array = any_failed = 0; - - reset_internal_getopt (); - while ((opt = internal_getopt (list, "fv")) != -1) - { - switch (opt) - { - case 'f': - unset_function = 1; - break; - case 'v': - unset_variable = 1; - break; - default: - builtin_usage (); - return (EXECUTION_FAILURE); - } - } - - list = loptend; - - if (unset_function && unset_variable) - { - builtin_error ("cannot simultaneously unset a function and a variable"); - return (EXECUTION_FAILURE); - } - - while (list) - { - SHELL_VAR *var; - int tem; -#if defined (ARRAY_VARS) - char *t; -#endif - - name = list->word->word; - -#if defined (ARRAY_VARS) - if (!unset_function && valid_array_reference (name)) - { - t = strchr (name, '['); - *t++ = '\0'; - unset_array++; - } -#endif - - var = unset_function ? find_function (name) : find_variable (name); - - if (var && !unset_function && non_unsettable_p (var)) - { - builtin_error ("%s: cannot unset", name); - NEXT_VARIABLE (); - } - - /* Posix.2 says that unsetting readonly variables is an error. */ - if (var && readonly_p (var)) - { - builtin_error ("%s: cannot unset: readonly %s", - name, unset_function ? "function" : "variable"); - NEXT_VARIABLE (); - } - - /* Unless the -f option is supplied, the name refers to a variable. */ -#if defined (ARRAY_VARS) - if (var && unset_array) - { - if (array_p (var) == 0) - { - builtin_error ("%s: not an array variable", name); - NEXT_VARIABLE (); - } - else - tem = unbind_array_element (var, t); - } - else -#endif /* ARRAY_VARS */ - tem = makunbound (name, unset_function ? shell_functions : shell_variables); - - /* This is what Posix.2 draft 11+ says. ``If neither -f nor -v - is specified, the name refers to a variable; if a variable by - that name does not exist, a function by that name, if any, - shall be unset.'' */ - if ((tem == -1) && !unset_function && !unset_variable) - tem = makunbound (name, shell_functions); - - if (tem == -1) - any_failed++; - else if (!unset_function) - stupidly_hack_special_variables (name); - - list = list->next; - } - - if (any_failed) - return (EXECUTION_FAILURE); - else - return (EXECUTION_SUCCESS); -} diff --git a/CWRU/save/unwind_prot.h.save b/CWRU/save/unwind_prot.h.save deleted file mode 100644 index 998fd72b6..000000000 --- a/CWRU/save/unwind_prot.h.save +++ /dev/null @@ -1,50 +0,0 @@ -/* unwind_prot.h - Macros and functions for hacking unwind protection. */ - -/* Copyright (C) 1993 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software; you can redistribute it and/or modify it under - the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2, or (at your option) any later - version. - - Bash is distributed in the hope that it will be useful, but WITHOUT ANY - WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with Bash; see the file COPYING. If not, write to the Free Software - Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#if !defined (_UNWIND_PROT_H) -#define _UNWIND_PROT_H - -/* Run a function without interrupts. */ -extern void begin_unwind_frame (); -extern void discard_unwind_frame (); -extern void run_unwind_frame (); -extern void add_unwind_protect (); -extern void remove_unwind_protect (); -extern void run_unwind_protects (); -extern void unwind_protect_var (); - -/* Define for people who like their code to look a certain way. */ -#define end_unwind_frame() - -/* How to protect an integer. */ -#define unwind_protect_int(X) unwind_protect_var (&(X), (char *)(X), sizeof (int)) - -/* How to protect a pointer to a string. */ -#define unwind_protect_string(X) \ - unwind_protect_var ((int *)&(X), (X), sizeof (char *)) - -/* How to protect any old pointer. */ -#define unwind_protect_pointer(X) unwind_protect_string (X) - -/* How to protect the contents of a jmp_buf. */ -#define unwind_protect_jmp_buf(X) \ - unwind_protect_var ((int *)(X), (char *)(X), sizeof (procenv_t)) - -#endif /* _UNWIND_PROT_H */ diff --git a/cross-build/cygwin32.cache.old b/cross-build/cygwin32.cache.old deleted file mode 100644 index 640390fbf..000000000 --- a/cross-build/cygwin32.cache.old +++ /dev/null @@ -1,42 +0,0 @@ -# This file is a shell script that caches the results of configure -# tests for CYGWIN32 so they don't need to be done when cross-compiling. - -# AC_FUNC_GETPGRP should also define GETPGRP_VOID -ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'} -# AC_FUNC_SETVBUF_REVERSED should not define anything else -ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'} -# on CYGWIN32, system calls do not restart -ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'} -bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'} - -# these may be necessary, but they are currently commented out -#ac_cv_c_bigendian=${ac_cv_c_bigendian='no'} -ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'} -ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} -ac_cv_sizeof_long=${ac_cv_sizeof_long='4'} -ac_cv_sizeof_double=${ac_cv_sizeof_double='8'} - -bash_cv_dup2_broken=${bash_cv_dup2_broken='no'} -bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'} -bash_cv_type_rlimit=${bash_cv_type_rlimit='long'} -bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'} -bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'} -bash_cv_sys_siglist=${bash_cv_sys_siglist='no'} -bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'} -bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'} -bash_cv_printf_declared=${bash_cv_printf_declared='yes'} -bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'} -bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'} -bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'} -bash_cv_job_control_missing=${bash_cv_job_control_missing='present'} -bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='missing'} -bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='missing'} -bash_cv_mail_dir=${bash_cv_mail_dir='unknown'} -bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'} - -bash_cv_type_int32_t=${bash_cv_type_int32_t='int'} -bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'} - -ac_cv_type_bits64_t=${ac_cv_type_bits64_t='no'} - -# end of cross-build/cygwin32.cache diff --git a/doc/FAQ.orig b/doc/FAQ.orig deleted file mode 100644 index 1cff3c8ef..000000000 --- a/doc/FAQ.orig +++ /dev/null @@ -1,1745 +0,0 @@ -This is the Bash FAQ, version 3.24, for Bash version 2.05b. - -This document contains a set of frequently-asked questions concerning -Bash, the GNU Bourne-Again Shell. Bash is a freely-available command -interpreter with advanced features for both interactive use and shell -programming. - -Another good source of basic information about shells is the collection -of FAQ articles periodically posted to comp.unix.shell. - -Questions and comments concerning this document should be sent to -chet@po.cwru.edu. - -This document is available for anonymous FTP with the URL - -ftp://ftp.cwru.edu/pub/bash/FAQ - -The Bash home page is http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html - ----------- -Contents: - -Section A: The Basics - -A1) What is it? -A2) What's the latest version? -A3) Where can I get it? -A4) On what machines will bash run? -A5) Will bash run on operating systems other than Unix? -A6) How can I build bash with gcc? -A7) How can I make bash my login shell? -A8) I just changed my login shell to bash, and now I can't FTP into my - machine. Why not? -A9) What's the `POSIX 1003.2 standard'? -A10) What is the bash `posix mode'? - -Section B: The latest version - -B1) What's new in version 2.05b? -B2) Are there any user-visible incompatibilities between bash-2.05b and - bash-1.14.7? - -Section C: Differences from other Unix shells - -C1) How does bash differ from sh, the Bourne shell? -C2) How does bash differ from the Korn shell, version ksh88? -C3) Which new features in ksh-93 are not in bash, and which are? - -Section D: Why does bash do some things differently than other Unix shells? - -D1) Why does bash run a different version of `command' than - `which command' says it will? -D2) Why doesn't bash treat brace expansions exactly like csh? -D3) Why doesn't bash have csh variable modifiers? -D4) How can I make my csh aliases work when I convert to bash? -D5) How can I pipe standard output and standard error from one command to - another, like csh does with `|&'? -D6) Now that I've converted from ksh to bash, are there equivalents to - ksh features like autoloaded functions and the `whence' command? - -Section E: Why does bash do certain things the way it does? - -E1) Why is the bash builtin `test' slightly different from /bin/test? -E2) Why does bash sometimes say `Broken pipe'? -E3) When I have terminal escape sequences in my prompt, why does bash - wrap lines at the wrong column? -E4) If I pipe the output of a command into `read variable', why doesn't - the output show up in $variable when the read command finishes? -E5) I have a bunch of shell scripts that use backslash-escaped characters - in arguments to `echo'. Bash doesn't interpret these characters. Why - not, and how can I make it understand them? -E6) Why doesn't a while or for loop get suspended when I type ^Z? -E7) What about empty for loops in Makefiles? -E8) Why does the arithmetic evaluation code complain about `08'? -E9) Why does the pattern matching expression [A-Z]* match files beginning - with every letter except `z'? -E10) Why does `cd //' leave $PWD as `//'? -E11) If I resize my xterm while another program is running, why doesn't bash - notice the change? - -Section F: Things to watch out for on certain Unix versions - -F1) Why can't I use command line editing in my `cmdtool'? -F2) I built bash on Solaris 2. Why do globbing expansions and filename - completion chop off the first few characters of each filename? -F3) Why does bash dump core after I interrupt username completion or - `~user' tilde expansion on a machine running NIS? -F4) I'm running SVR4.2. Why is the line erased every time I type `@'? -F5) Why does bash report syntax errors when my C News scripts use a - redirection before a subshell command? -F6) Why can't I use vi-mode editing on Red Hat Linux 6.1? -F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on - HP/UX 11.x? - -Section G: How can I get bash to do certain common things? - -G1) How can I get bash to read and display eight-bit characters? -G2) How do I write a function `x' to replace builtin command `x', but - still invoke the command from within the function? -G3) How can I find the value of a shell variable whose name is the value - of another shell variable? -G4) How can I make the bash `time' reserved word print timing output that - looks like the output from my system's /usr/bin/time? -G5) How do I get the current directory into my prompt? -G6) How can I rename "*.foo" to "*.bar"? -G7) How can I translate a filename from uppercase to lowercase? -G8) How can I write a filename expansion (globbing) pattern that will match - all files in the current directory except "." and ".."? - -Section H: Where do I go from here? - -H1) How do I report bugs in bash, and where should I look for fixes and - advice? -H2) What kind of bash documentation is there? -H3) What's coming in future versions? -H4) What's on the bash `wish list'? -H5) When will the next release appear? - ----------- -Section A: The Basics - -A1) What is it? - -Bash is a Unix command interpreter (shell). It is an implementation of -the Posix 1003.2 shell standard, and resembles the Korn and System V -shells. - -Bash contains a number of enhancements over those shells, both -for interactive use and shell programming. Features geared -toward interactive use include command line editing, command -history, job control, aliases, and prompt expansion. Programming -features include additional variable expansions, shell -arithmetic, and a number of variables and options to control -shell behavior. - -Bash was originally written by Brian Fox of the Free Software -Foundation. The current developer and maintainer is Chet Ramey -of Case Western Reserve University. - -A2) What's the latest version? - -The latest version is 2.05b, first made available on Wednesday, 17 -July, 2002. - -A3) Where can I get it? - -Bash is the GNU project's shell, and so is available from the -master GNU archive site, ftp.gnu.org, and its mirrors. The -latest version is also available for FTP from ftp.cwru.edu. -The following URLs tell how to get version 2.05b: - -ftp://ftp.gnu.org/pub/gnu/bash/bash-2.05b.tar.gz -ftp://ftp.cwru.edu/pub/bash/bash-2.05b.tar.gz - -Formatted versions of the documentation are available with the URLs: - -ftp://ftp.gnu.org/pub/gnu/bash/bash-doc-2.05b.tar.gz -ftp://ftp.cwru.edu/pub/bash/bash-doc-2.05b.tar.gz - -A4) On what machines will bash run? - -Bash has been ported to nearly every version of UNIX. All you -should have to do to build it on a machine for which a port -exists is to type `configure' and then `make'. The build process -will attempt to discover the version of UNIX you have and tailor -itself accordingly, using a script created by GNU autoconf. - -More information appears in the file `INSTALL' in the distribution. - -The Bash web page (http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html) -explains how to obtain binary versions of bash for most of the major -commercial Unix systems. - -A5) Will bash run on operating systems other than Unix? - -Configuration specifics for Unix-like systems such as QNX and -LynxOS are included in the distribution. Bash-2.05 and later -versions should compile and run on Minix 2.0 (patches were -contributed), but I don't believe anyone has built bash-2.x on -earlier Minix versions yet. - -Bash has been ported to versions of Windows implementing the Win32 -programming interface. This includes Windows 95 and Windows NT. -The port was done by Cygnus Solutions as part of their CYGWIN -project. For more information about the project, look at the URLs - -http://www.cygwin.com/ -http://sourceware.cygnus.com/cygwin - -Cygnus originally ported bash-1.14.7, and that port was part of their -early GNU-Win32 (the original name) releases. Cygnus has also done a -port of bash-2.05 to the CYGWIN environment, and it is available as -part of their current release. - -Bash-2.05b should require no local Cygnus changes to build and run under -CYGWIN. - -The Cygnus port works only on Intel machines. There is a port of bash -(I don't know which version) to the alpha/NT environment available from - -ftp://ftp.gnustep.org//pub/win32/bash-alpha-nt-1.01.tar.gz - -DJ Delorie has a port of bash-2.x which runs under MS-DOS, as part -of the DJGPP project. For more information on the project, see - -http://www.delorie.com/djgpp/ - -I have been told that the original DJGPP port was done by Daisuke Aoyama. - -Mark Elbrecht has sent me notice that bash-2.04 -is available for DJGPP V2. The files are available as: - -ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204b.zip binary -ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204d.zip documentation -ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204s.zip source - -Mark has begun to work with bash-2.05, but I don't know the status. - -Ports of bash-1.12 and bash-2.0 are available for OS/2 from - -ftp://hobbes.nmsu.edu/pub/os2/util/shell/bash_112.zip -ftp://hobbes.nmsu.edu/pub/os2/util/shell/bash-2.0(253).zip - -I haven't looked at either, but the second appears to be a binary-only -distribution. Beware. - -I have received word that Bash (I'm not sure which version, but I -believe that it's at least bash-2.02.1) is the standard shell on -BeOS. - -A6) How can I build bash with gcc? - -Bash configures to use gcc by default if it is available. Read the -file INSTALL in the distribution for more information. - -A7) How can I make bash my login shell? - -Some machines let you use `chsh' to change your login shell. Other -systems use `passwd -s' or `passwd -e'. If one of these works for -you, that's all you need. Note that many systems require the full -pathname to a shell to appear in /etc/shells before you can make it -your login shell. For this, you may need the assistance of your -friendly local system administrator. - -If you cannot do this, you can still use bash as your login shell, but -you need to perform some tricks. The basic idea is to add a command -to your login shell's startup file to replace your login shell with -bash. - -For example, if your login shell is csh or tcsh, and you have installed -bash in /usr/gnu/bin/bash, add the following line to ~/.login: - - if ( -f /usr/gnu/bin/bash ) exec /usr/gnu/bin/bash --login - -(the `--login' tells bash that it is a login shell). - -It's not a good idea to put this command into ~/.cshrc, because every -csh you run without the `-f' option, even ones started to run csh scripts, -reads that file. If you must put the command in ~/.cshrc, use something -like - - if ( $?prompt ) exec /usr/gnu/bin/bash --login - -to ensure that bash is exec'd only when the csh is interactive. - -If your login shell is sh or ksh, you have to do two things. - -First, create an empty file in your home directory named `.bash_profile'. -The existence of this file will prevent the exec'd bash from trying to -read ~/.profile, and re-execing itself over and over again. ~/.bash_profile -is the first file bash tries to read initialization commands from when -it is invoked as a login shell. - -Next, add a line similar to the above to ~/.profile: - - [ -f /usr/gnu/bin/bash ] && [ -x /usr/gnu/bin/bash ] && \ - exec /usr/gnu/bin/bash --login - -This will cause login shells to replace themselves with bash running as -a login shell. Once you have this working, you can copy your initialization -code from ~/.profile to ~/.bash_profile. - -I have received word that the recipe supplied above is insufficient for -machines running CDE. CDE has a maze of twisty little startup files, all -slightly different. - -If you cannot change your login shell in the password file to bash, you -will have to (apparently) live with CDE using the shell in the password -file to run its startup scripts. If you have changed your shell to bash, -there is code in the CDE startup files (on Solaris, at least) that attempts -to do the right thing. It is, however, often broken, and may require that -you use the $BASH_ENV trick described below. - -`dtterm' claims to use $SHELL as the default program to start, so if you -can change $SHELL in the CDE startup files, you should be able to use bash -in your terminal windows. - -Setting DTSOURCEPROFILE in ~/.dtprofile will cause the `Xsession' program -to read your login shell's startup files. You may be able to use bash for -the rest of the CDE programs by setting SHELL to bash in ~/.dtprofile as -well, but I have not tried this. - -You can use the above `exec' recipe to start bash when not logging in with -CDE by testing the value of the DT variable: - - if [ -n "$DT" ]; then - [ -f /usr/gnu/bin/bash ] && exec /usr/gnu/bin/bash --login - fi - -If CDE starts its shells non-interactively during login, the login shell -startup files (~/.profile, ~/.bash_profile) will not be sourced at login. -To get around this problem, append a line similar to the following to your -~/.dtprofile: - - BASH_ENV=${HOME}/.bash_profile ; export BASH_ENV - -and add the following line to the beginning of ~/.bash_profile: - - unset BASH_ENV - -A8) I just changed my login shell to bash, and now I can't FTP into my - machine. Why not? - -You must add the full pathname to bash to the file /etc/shells. As -noted in the answer to the previous question, many systems require -this before you can make bash your login shell. - -Most versions of ftpd use this file to prohibit `special' users -such as `uucp' and `news' from using FTP. - -A9) What's the `POSIX 1003.2 standard'? - -POSIX is a name originally coined by Richard Stallman for a -family of open system standards based on UNIX. There are a -number of aspects of UNIX under consideration for -standardization, from the basic system services at the system -call and C library level to applications and tools to system -administration and management. Each area of standardization is -assigned to a working group in the 1003 series. - -The POSIX Shell and Utilities standard has been developed by IEEE -Working Group 1003.2 (POSIX.2). It concentrates on the command -interpreter interface and utility programs commonly executed from -the command line or by other programs. An initial version of the -standard has been approved and published by the IEEE, and work is -currently underway to update it. - -Bash is concerned with the aspects of the shell's behavior -defined by POSIX.2. The shell command language has of course -been standardized, including the basic flow control and program -execution constructs, I/O redirection and pipelining, argument -handling, variable expansion, and quoting. - -The `special' builtins, which must be implemented as part of the -shell to provide the desired functionality, are specified as -being part of the shell; examples of these are `eval' and -`export'. Other utilities appear in the sections of POSIX.2 not -devoted to the shell which are commonly (and in some cases must -be) implemented as builtin commands, such as `read' and `test'. -POSIX.2 also specifies aspects of the shell's interactive -behavior as part of the UPE, including job control and command -line editing. Only vi-style line editing commands have been -standardized; emacs editing commands were left out due to -objections. - -The Open Group has made an older version of its Single Unix -Specification (version 2), which is very similar to POSIX.2, -available on the web at - -http://www.opengroup.org/onlinepubs/007908799/ - -The Single Unix Specification, version 3, is available on the web at - -http://www.opengroup.org/onlinepubs/007904975/ - -A10) What is the bash `posix mode'? - -Although bash is an implementation of the POSIX.2 shell -specification, there are areas where the bash default behavior -differs from that spec. The bash `posix mode' changes the bash -behavior in these areas so that it obeys the spec more closely. - -Posix mode is entered by starting bash with the --posix or -'-o posix' option or executing `set -o posix' after bash is running. - -The specific aspects of bash which change when posix mode is -active are listed in the file POSIX in the bash distribution. -They are also listed in a section in the Bash Reference Manual -(from which that file is generated). - -Section B: The latest version - -B1) What's new in version 2.05b? - -The raison d'etre for bash-2.05b is to make a second intermediate -release containing the first of the new features to be available -in bash-3.0 and get feedback on those features before proceeding. -The major new feature is multibyte character support in both Bash -and Readline. - -Bash-2.05b contains the following new features (see the manual page for -complete descriptions and the CHANGES and NEWS files in the bash-2.05b -distribution): - -o support for multibyte characters has been added to both bash and readline - -o the DEBUG trap is now run *before* simple commands, ((...)) commands, - [[...]] conditional commands, and for ((...)) loops - -o the shell now performs arithmetic in the largest integer size the machine - supports (intmax_t) - -o there is a new \D{...} prompt expansion; passes the `...' to strftime(3) - and inserts the result into the expanded prompt - -o there is a new `here-string' redirection operator: <<< word - -o when displaying variables, function attributes and definitions are shown - separately, allowing them to be re-used as input (attempting to re-use - the old output would result in syntax errors). - -o `read' has a new `-u fd' option to read from a specified file descriptor - -o the bash debugger in examples/bashdb has been modified to work with the - new DEBUG trap semantics, the command set has been made more gdb-like, - and the changes to $LINENO make debugging functions work better - -o the expansion of $LINENO inside a shell function is only relative to the - function start if the shell is interactive -- if the shell is running a - script, $LINENO expands to the line number in the script. This is as - POSIX-2001 requires - - -A short feature history dating from Bash-2.0: - -Bash-2.05a introduced the following new features: - -o The `printf' builtin has undergone major work - -o There is a new read-only `shopt' option: login_shell, which is set by - login shells and unset otherwise - -o New `\A' prompt string escape sequence; expanding to time in 24-hour - HH:MM format - -o New `-A group/-g' option to complete and compgen; goes group name - completion - -o New [+-]O invocation option to set and unset `shopt' options at startup - -o ksh-like `ERR' trap - -o `for' loops now allow empty word lists after the `in' reserved word - -o new `hard' and `soft' arguments for the `ulimit' builtin - -o Readline can be configured to place the user at the same point on the line - when retrieving commands from the history list - -o Readline can be configured to skip `hidden' files (filenames with a leading - `.' on Unix) when performing completion - -Bash-2.05 introduced the following new features: - -o This version has once again reverted to using locales and strcoll(3) when - processing pattern matching bracket expressions, as POSIX requires. -o Added a new `--init-file' invocation argument as a synonym for `--rcfile', - per the new GNU coding standards. -o The /dev/tcp and /dev/udp redirections now accept service names as well as - port numbers. -o `complete' and `compgen' now take a `-o value' option, which controls some - of the aspects of that compspec. Valid values are: - - default - perform bash default completion if programmable - completion produces no matches - dirnames - perform directory name completion if programmable - completion produces no matches - filenames - tell readline that the compspec produces filenames, - so it can do things like append slashes to - directory names and suppress trailing spaces -o A new loadable builtin, realpath, which canonicalizes and expands symlinks - in pathname arguments. -o When `set' is called without options, it prints function defintions in a - way that allows them to be reused as input. This affects `declare' and - `declare -p' as well. This only happens when the shell is not in POSIX - mode, since POSIX.2 forbids this behavior. - -Bash-2.04 introduced the following new features: - -o Programmable word completion with the new `complete' and `compgen' builtins; - examples are provided in examples/complete/complete-examples -o `history' has a new `-d' option to delete a history entry -o `bind' has a new `-x' option to bind key sequences to shell commands -o The prompt expansion code has new `\j' and `\l' escape sequences -o The `no_empty_cmd_completion' shell option, if enabled, inhibits - command completion when TAB is typed on an empty line -o `help' has a new `-s' option to print a usage synopsis -o New arithmetic operators: var++, var--, ++var, --var, expr1,expr2 (comma) -o New ksh93-style arithmetic for command: - for ((expr1 ; expr2; expr3 )); do list; done -o `read' has new options: `-t', `-n', `-d', `-s' -o The redirection code handles several filenames specially: /dev/fd/N, - /dev/stdin, /dev/stdout, /dev/stderr -o The redirection code now recognizes /dev/tcp/HOST/PORT and - /dev/udp/HOST/PORT and tries to open a TCP or UDP socket, respectively, - to the specified port on the specified host -o The ${!prefix*} expansion has been implemented -o A new FUNCNAME variable, which expands to the name of a currently-executing - function -o The GROUPS variable is no longer readonly -o A new shopt `xpg_echo' variable, to control the behavior of echo with - respect to backslash-escape sequences at runtime -o The NON_INTERACTIVE_LOGIN_SHELLS #define has returned - -The version of Readline released with Bash-2.04, Readline-4.1, had several -new features as well: - -o Parentheses matching is always compiled into readline, and controllable - with the new `blink-matching-paren' variable -o The history-search-forward and history-search-backward functions now leave - point at the end of the line when the search string is empty, like - reverse-search-history, and forward-search-history -o A new function for applications: rl_on_new_line_with_prompt() -o New variables for applications: rl_already_prompted, and rl_gnu_readline_p - - -Bash-2.03 had very few new features, in keeping with the convention -that odd-numbered releases provide mainly bug fixes. A number of new -features were added to Readline, mostly at the request of the Cygnus -folks. - -A new shopt option, `restricted_shell', so that startup files can test - whether or not the shell was started in restricted mode -Filename generation is now performed on the words between ( and ) in - compound array assignments (this is really a bug fix) -OLDPWD is now auto-exported, as POSIX.2 requires -ENV and BASH_ENV are read-only variables in a restricted shell -Bash may now be linked against an already-installed Readline library, - as long as the Readline library is version 4 or newer -All shells begun with the `--login' option will source the login shell - startup files, even if the shell is not interactive - -There were lots of changes to the version of the Readline library released -along with Bash-2.03. For a complete list of the changes, read the file -CHANGES in the Bash-2.03 distribution. - -Bash-2.02 contained the following new features: - -a new version of malloc (based on the old GNU malloc code in previous - bash versions) that is more page-oriented, more conservative - with memory usage, does not `orphan' large blocks when they - are freed, is usable on 64-bit machines, and has allocation - checking turned on unconditionally -POSIX.2-style globbing character classes ([:alpha:], [:alnum:], etc.) -POSIX.2-style globbing equivalence classes -POSIX.2-style globbing collating symbols -the ksh [[...]] extended conditional command -the ksh egrep-style extended pattern matching operators -a new `printf' builtin -the ksh-like $(, &>, >|, <<<, [n]<&word-, [n]>&word- - prompt string special char translation and variable expansion - auto-export of variables in initial environment - command search finds functions before builtins - bash return builtin will exit a file sourced with `.' - builtins: cd -/-L/-P, exec -l/-c/-a, echo -e/-E, hash -d/-l/-p/-t. - export -n/-f/-p/name=value, pwd -L/-P, - read -e/-p/-a/-t/-n/-d/-s/-u, - readonly -a/-f/name=value, trap -l, set +o, - set -b/-m/-o option/-h/-p/-B/-C/-H/-P, - unset -f/-v, ulimit -m/-p/-u, - type -a/-p/-t/-f/-P, suspend -f, kill -n, - test -o optname/s1 == s2/s1 < s2/s1 > s2/-nt/-ot/-ef/-O/-G/-S - bash reads ~/.bashrc for interactive shells, $ENV for non-interactive - bash restricted shell mode is more extensive - bash allows functions and variables with the same name - brace expansion - tilde expansion - arithmetic expansion with $((...)) and `let' builtin - the `[[...]]' extended conditional command - process substitution - aliases and alias/unalias builtins - local variables in functions and `local' builtin - readline and command-line editing with programmable completion - command history and history/fc builtins - csh-like history expansion - other new bash builtins: bind, command, compgen, complete, builtin, - declare/typeset, dirs, enable, fc, help, - history, logout, popd, pushd, disown, shopt, - printf - exported functions - filename generation when using output redirection (command >a*) - POSIX.2-style globbing character classes - POSIX.2-style globbing equivalence classes - POSIX.2-style globbing collating symbols - egrep-like extended pattern matching operators - case-insensitive pattern matching and globbing - variable assignments preceding commands affect only that command, - even for builtins and functions - posix mode - redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr, - /dev/tcp/host/port, /dev/udp/host/port - -Things sh has that bash does not: - uses variable SHACCT to do shell accounting - includes `stop' builtin (bash can use alias stop='kill -s STOP') - `newgrp' builtin - turns on job control if called as `jsh' - $TIMEOUT (like bash $TMOUT) - `^' is a synonym for `|' - new SVR4.2 sh builtins: mldmode, priv - -Implementation differences: - redirection to/from compound commands causes sh to create a subshell - bash does not allow unbalanced quotes; sh silently inserts them at EOF - bash does not mess with signal 11 - sh sets (euid, egid) to (uid, gid) if -p not supplied and uid < 100 - bash splits only the results of expansions on IFS, using POSIX.2 - field splitting rules; sh splits all words on IFS - sh does not allow MAILCHECK to be unset (?) - sh does not allow traps on SIGALRM or SIGCHLD - bash allows multiple option arguments when invoked (e.g. -x -v); - sh allows only a single option argument (`sh -x -v' attempts - to open a file named `-v', and, on SunOS 4.1.4, dumps core. - On Solaris 2.4 and earlier versions, sh goes into an infinite - loop.) - sh exits a script if any builtin fails; bash exits only if one of - the POSIX.2 `special' builtins fails - -C2) How does bash differ from the Korn shell, version ksh88? - -Things bash has or uses that ksh88 does not: - long invocation options - [-+]O invocation option - -l invocation option - `!' reserved word - arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done - arithmetic in largest machine-supported size (intmax_t) - posix mode and posix conformance - command hashing - tilde expansion for assignment statements that look like $PATH - process substitution with named pipes if /dev/fd is not available - the ${!param} indirect parameter expansion operator - the ${!param*} prefix expansion operator - the ${param:offset[:length]} parameter substring operator - the ${param/pat[/string]} parameter pattern substitution operator - variables: BASH, BASH_VERSION, BASH_VERSINFO, UID, EUID, SHLVL, - TIMEFORMAT, HISTCMD, HOSTTYPE, OSTYPE, MACHTYPE, - HISTFILESIZE, HISTIGNORE, HISTCONTROL, PROMPT_COMMAND, - IGNOREEOF, FIGNORE, INPUTRC, HOSTFILE, DIRSTACK, - PIPESTATUS, HOSTNAME, OPTERR, SHELLOPTS, GLOBIGNORE, - GROUPS, FUNCNAME, histchars, auto_resume - prompt expansion with backslash escapes and command substitution - redirection: &> (stdout and stderr), <<<, [n]<&word-, [n]>&word- - more extensive and extensible editing and programmable completion - builtins: bind, builtin, command, declare, dirs, echo -e/-E, enable, - exec -l/-c/-a, fc -s, export -n/-f/-p, hash, help, history, - jobs -x/-r/-s, kill -s/-n/-l, local, logout, popd, pushd, - read -e/-p/-a/-t/-n/-d/-s, readonly -a/-n/-f/-p, - set -o braceexpand/-o histexpand/-o interactive-comments/ - -o notify/-o physical/-o posix/-o hashall/-o onecmd/ - -h/-B/-C/-b/-H/-P, set +o, suspend, trap -l, type, - typeset -a/-F/-p, ulimit -u, umask -S, alias -p, shopt, - disown, printf, complete, compgen - `!' csh-style history expansion - POSIX.2-style globbing character classes - POSIX.2-style globbing equivalence classes - POSIX.2-style globbing collating symbols - egrep-like extended pattern matching operators - case-insensitive pattern matching and globbing - `**' arithmetic operator to do exponentiation - redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr - arrays of unlimited size - TMOUT is default timeout for `read' and `select' - -Things ksh88 has or uses that bash does not: - tracked aliases (alias -t) - variables: ERRNO, FPATH, EDITOR, VISUAL - co-processes (|&, >&p, <&p) - weirdly-scoped functions - typeset +f to list all function names without definitions - text of command history kept in a file, not memory - builtins: alias -x, cd old new, fc -e -, newgrp, print, - read -p/-s/var?prompt, set -A/-o gmacs/ - -o bgnice/-o markdirs/-o nolog/-o trackall/-o viraw/-s, - typeset -H/-L/-R/-Z/-A/-ft/-fu/-fx/-l/-u/-t, whence - using environment to pass attributes of exported variables - arithmetic evaluation done on arguments to some builtins - reads .profile from $PWD when invoked as login shell - -Implementation differences: - ksh runs last command of a pipeline in parent shell context - bash has brace expansion by default (ksh88 compile-time option) - bash has fixed startup file for all interactive shells; ksh reads $ENV - bash has exported functions - bash command search finds functions before builtins - bash waits for all commands in pipeline to exit before returning status - emacs-mode editing has some slightly different key bindings - -C3) Which new features in ksh-93 are not in bash, and which are? - -New things in ksh-93 not in bash-2.05b: - associative arrays - floating point arithmetic and variables - math library functions - ${!name[sub]} name of subscript for associative array - `.' is allowed in variable names to create a hierarchical namespace - more extensive compound assignment syntax - discipline functions - `sleep' and `getconf' builtins (bash has loadable versions) - typeset -n and `nameref' variables - KEYBD trap - variables: .sh.edchar, .sh.edmode, .sh.edcol, .sh.edtext, .sh.version, - .sh.name, .sh.subscript, .sh.value, .sh.match, HISTEDIT - backreferences in pattern matching (\N) - `&' operator in pattern lists for matching - print -f (bash uses printf) - `fc' has been renamed to `hist' - `.' can execute shell functions - exit statuses between 0 and 255 - set -o pipefail - `+=' variable assignment operator - FPATH and PATH mixing - getopts -a - -I invocation option - DEBUG trap now executed before each simple command, instead of after - printf %H, %P, %T, %Z modifiers, output base for %d - lexical scoping for local variables in `ksh' functions - no scoping for local variables in `POSIX' functions - -New things in ksh-93 present in bash-2.05b: - [n]<&word- and [n]>&word- redirections (combination dup and close) - for (( expr1; expr2; expr3 )) ; do list; done - arithmetic for command - ?:, ++, --, `expr1 , expr2' arithmetic operators - expansions: ${!param}, ${param:offset[:len]}, ${param/pat[/str]}, - ${!param*} - compound array assignment - the `!' reserved word - loadable builtins -- but ksh uses `builtin' while bash uses `enable' - `command', `builtin', `disown' builtins - new $'...' and $"..." quoting - FIGNORE (but bash uses GLOBIGNORE), HISTCMD - set -o notify/-C - changes to kill builtin - read -A (bash uses read -a) - read -t/-d - trap -p - exec -c/-a - `.' restores the positional parameters when it completes - POSIX.2 `test' - umask -S - unalias -a - command and arithmetic substitution performed on PS1, PS4, and ENV - command name completion - ENV processed only for interactive shells - -Section D: Why does bash do some things differently than other Unix shells? - -D1) Why does bash run a different version of `command' than - `which command' says it will? - -On many systems, `which' is actually a csh script that assumes -you're running csh. In tcsh, `which' and its cousin `where' -are builtins. On other Unix systems, `which' is a perl script -that uses the PATH environment variable. - -The csh script version reads the csh startup files from your -home directory and uses those to determine which `command' will -be invoked. Since bash doesn't use any of those startup files, -there's a good chance that your bash environment differs from -your csh environment. The bash `type' builtin does everything -`which' does, and will report correct results for the running -shell. If you're really wedded to the name `which', try adding -the following function definition to your .bashrc: - - which() - { - builtin type "$@" - } - -If you're moving from tcsh and would like to bring `where' along -as well, use this function: - - where() - { - builtin type -a "$@" - } - -D2) Why doesn't bash treat brace expansions exactly like csh? - -The only difference between bash and csh brace expansion is that -bash requires a brace expression to contain at least one unquoted -comma if it is to be expanded. Any brace-surrounded word not -containing an unquoted comma is left unchanged by the brace -expansion code. This affords the greatest degree of sh -compatibility. - -Bash, ksh, zsh, and pd-ksh all implement brace expansion this way. - -D3) Why doesn't bash have csh variable modifiers? - -Posix has specified a more powerful, albeit somewhat more cryptic, -mechanism cribbed from ksh, and bash implements it. - -${parameter%word} - Remove smallest suffix pattern. The WORD is expanded to produce - a pattern. It then expands to the value of PARAMETER, with the - smallest portion of the suffix matched by the pattern deleted. - - x=file.c - echo ${x%.c}.o - -->file.o - -${parameter%%word} - - Remove largest suffix pattern. The WORD is expanded to produce - a pattern. It then expands to the value of PARAMETER, with the - largest portion of the suffix matched by the pattern deleted. - - x=posix/src/std - echo ${x%%/*} - -->posix - -${parameter#word} - Remove smallest prefix pattern. The WORD is expanded to produce - a pattern. It then expands to the value of PARAMETER, with the - smallest portion of the prefix matched by the pattern deleted. - - x=$HOME/src/cmd - echo ${x#$HOME} - -->/src/cmd - -${parameter##word} - Remove largest prefix pattern. The WORD is expanded to produce - a pattern. It then expands to the value of PARAMETER, with the - largest portion of the prefix matched by the pattern deleted. - - x=/one/two/three - echo ${x##*/} - -->three - - -Given - a=/a/b/c/d - b=b.xxx - - csh bash result - --- ---- ------ - $a:h ${a%/*} /a/b/c - $a:t ${a##*/} d - $b:r ${b%.*} b - $b:e ${b##*.} xxx - - -D4) How can I make my csh aliases work when I convert to bash? - -Bash uses a different syntax to support aliases than csh does. -The details can be found in the documentation. We have provided -a shell script which does most of the work of conversion for you; -this script can be found in ./examples/misc/aliasconv.sh. Here is -how you use it: - -Start csh in the normal way for you. (e.g., `csh') - -Pipe the output of `alias' through `aliasconv.sh', saving the -results into `bash_aliases': - - alias | bash aliasconv.sh >bash_aliases - -Edit `bash_aliases', carefully reading through any created -functions. You will need to change the names of some csh specific -variables to the bash equivalents. The script converts $cwd to -$PWD, $term to $TERM, $home to $HOME, $user to $USER, and $prompt -to $PS1. You may also have to add quotes to avoid unwanted -expansion. - -For example, the csh alias: - - alias cd 'cd \!*; echo $cwd' - -is converted to the bash function: - - cd () { command cd "$@"; echo $PWD ; } - -The only thing that needs to be done is to quote $PWD: - - cd () { command cd "$@"; echo "$PWD" ; } - -Merge the edited file into your ~/.bashrc. - -There is an additional, more ambitious, script in -examples/misc/cshtobash that attempts to convert your entire csh -environment to its bash equivalent. This script can be run as -simply `cshtobash' to convert your normal interactive -environment, or as `cshtobash ~/.login' to convert your login -environment. - -D5) How can I pipe standard output and standard error from one command to - another, like csh does with `|&'? - -Use - command 2>&1 | command2 - -The key is to remember that piping is performed before redirection, so -file descriptor 1 points to the pipe when it is duplicated onto file -descriptor 2. - -D6) Now that I've converted from ksh to bash, are there equivalents to - ksh features like autoloaded functions and the `whence' command? - -There are features in ksh-88 and ksh-93 that do not have direct bash -equivalents. Most, however, can be emulated with very little trouble. - -ksh-88 feature Bash equivalent --------------- --------------- -compiled-in aliases set up aliases in .bashrc; some ksh aliases are - bash builtins (hash, history, type) -coprocesses named pipe pairs (one for read, one for write) -typeset +f declare -F -cd, print, whence function substitutes in examples/functions/kshenv -autoloaded functions examples/functions/autoload is the same as typeset -fu -read var?prompt read -p prompt var - -ksh-93 feature Bash equivalent --------------- --------------- -sleep, getconf Bash has loadable versions in examples/loadables -${.sh.version} $BASH_VERSION -print -f printf -hist alias hist=fc -$HISTEDIT $FCEDIT - -Section E: How can I get bash to do certain things, and why does bash do - things the way it does? - -E1) Why is the bash builtin `test' slightly different from /bin/test? - -The specific example used here is [ ! x -o x ], which is false. - -Bash's builtin `test' implements the Posix.2 spec, which can be -summarized as follows (the wording is due to David Korn): - -Here is the set of rules for processing test arguments. - - 0 Args: False - 1 Arg: True iff argument is not null. - 2 Args: If first arg is !, True iff second argument is null. - If first argument is unary, then true if unary test is true - Otherwise error. - 3 Args: If second argument is a binary operator, do binary test of $1 $3 - If first argument is !, negate two argument test of $2 $3 - If first argument is `(' and third argument is `)', do the - one-argument test of the second argument. - Otherwise error. - 4 Args: If first argument is !, negate three argument test of $2 $3 $4. - Otherwise unspecified - 5 or more Args: unspecified. (Historical shells would use their - current algorithm). - -The operators -a and -o are considered binary operators for the purpose -of the 3 Arg case. - -As you can see, the test becomes (not (x or x)), which is false. - -E2) Why does bash sometimes say `Broken pipe'? - -If a sequence of commands appears in a pipeline, and one of the -reading commands finishes before the writer has finished, the -writer receives a SIGPIPE signal. Many other shells special-case -SIGPIPE as an exit status in the pipeline and do not report it. -For example, in: - - ps -aux | head - -`head' can finish before `ps' writes all of its output, and ps -will try to write on a pipe without a reader. In that case, bash -will print `Broken pipe' to stderr when ps is killed by a -SIGPIPE. - -You can build a version of bash that will not report SIGPIPE errors -by uncommenting the definition of DONT_REPORT_SIGPIPE in the file -config-top.h. - -E3) When I have terminal escape sequences in my prompt, why does bash - wrap lines at the wrong column? - -Readline, the line editing library that bash uses, does not know -that the terminal escape sequences do not take up space on the -screen. The redisplay code assumes, unless told otherwise, that -each character in the prompt is a `printable' character that -takes up one character position on the screen. - -You can use the bash prompt expansion facility (see the PROMPTING -section in the manual page) to tell readline that sequences of -characters in the prompt strings take up no screen space. - -Use the \[ escape to begin a sequence of non-printing characters, -and the \] escape to signal the end of such a sequence. - -E4) If I pipe the output of a command into `read variable', why doesn't - the output show up in $variable when the read command finishes? - -This has to do with the parent-child relationship between Unix -processes. It affects all commands run in pipelines, not just -simple calls to `read'. For example, piping a command's output -into a `while' loop that repeatedly calls `read' will result in -the same behavior. - -Each element of a pipeline runs in a separate process, a child of -the shell running the pipeline. A subprocess cannot affect its -parent's environment. When the `read' command sets the variable -to the input, that variable is set only in the subshell, not the -parent shell. When the subshell exits, the value of the variable -is lost. - -Many pipelines that end with `read variable' can be converted -into command substitutions, which will capture the output of -a specified command. The output can then be assigned to a -variable: - - grep ^gnu /usr/lib/news/active | wc -l | read ngroup - -can be converted into - - ngroup=$(grep ^gnu /usr/lib/news/active | wc -l) - -This does not, unfortunately, work to split the text among -multiple variables, as read does when given multiple variable -arguments. If you need to do this, you can either use the -command substitution above to read the output into a variable -and chop up the variable using the bash pattern removal -expansion operators or use some variant of the following -approach. - -Say /usr/local/bin/ipaddr is the following shell script: - -#! /bin/sh -host `hostname` | awk '/address/ {print $NF}' - -Instead of using - - /usr/local/bin/ipaddr | read A B C D - -to break the local machine's IP address into separate octets, use - - OIFS="$IFS" - IFS=. - set -- $(/usr/local/bin/ipaddr) - IFS="$OIFS" - A="$1" B="$2" C="$3" D="$4" - -Beware, however, that this will change the shell's positional -parameters. If you need them, you should save them before doing -this. - -This is the general approach -- in most cases you will not need to -set $IFS to a different value. - -Some other user-supplied alternatives include: - -read A B C D << HERE - $(IFS=.; echo $(/usr/local/bin/ipaddr)) -HERE - -and, where process substitution is available, - -read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr)) - -E5) I have a bunch of shell scripts that use backslash-escaped characters - in arguments to `echo'. Bash doesn't interpret these characters. Why - not, and how can I make it understand them? - -This is the behavior of echo on most Unix System V machines. - -The bash builtin `echo' is modeled after the 9th Edition -Research Unix version of `echo'. It does not interpret -backslash-escaped characters in its argument strings by default; -it requires the use of the -e option to enable the -interpretation. The System V echo provides no way to disable the -special characters; the bash echo has a -E option to disable -them. - -There is a configuration option that will make bash behave like -the System V echo and interpret things like `\t' by default. Run -configure with the --enable-xpg-echo-default option to turn this -on. Be aware that this will cause some of the tests run when you -type `make tests' to fail. - -There is a shell option, `xpg_echo', settable with `shopt', that will -change the behavior of echo at runtime. Enabling this option turns -on expansion of backslash-escape sequences. - -E6) Why doesn't a while or for loop get suspended when I type ^Z? - -This is a consequence of how job control works on Unix. The only -thing that can be suspended is the process group. This is a single -command or pipeline of commands that the shell forks and executes. - -When you run a while or for loop, the only thing that the shell forks -and executes are any commands in the while loop test and commands in -the loop bodies. These, therefore, are the only things that can be -suspended when you type ^Z. - -If you want to be able to stop the entire loop, you need to put it -within parentheses, which will force the loop into a subshell that -may be stopped (and subsequently restarted) as a single unit. - -E7) What about empty for loops in Makefiles? - -It's fairly common to see constructs like this in automatically-generated -Makefiles: - -SUBDIRS = @SUBDIRS@ - - ... - -subdirs-clean: - for d in ${SUBDIRS}; do \ - ( cd $$d && ${MAKE} ${MFLAGS} clean ) \ - done - -When SUBDIRS is empty, this results in a command like this being passed to -bash: - - for d in ; do - ( cd $d && ${MAKE} ${MFLAGS} clean ) - done - -In versions of bash before bash-2.05a, this was a syntax error. If the -reserved word `in' was present, a word must follow it before the semicolon -or newline. The language in the manual page referring to the list of words -being empty referred to the list after it is expanded. These versions of -bash required that there be at least one word following the `in' when the -construct was parsed. - -The idiomatic Makefile solution is something like: - -SUBDIRS = @SUBDIRS@ - -subdirs-clean: - subdirs=$SUBDIRS ; for d in $$subdirs; do \ - ( cd $$d && ${MAKE} ${MFLAGS} clean ) \ - done - -The latest drafts of the updated POSIX standard have changed this: the -word list is no longer required. Bash versions 2.05a and later accept -the new syntax. - -E8) Why does the arithmetic evaluation code complain about `08'? - -The bash arithmetic evaluation code (used for `let', $(()), (()), and in -other places), interprets a leading `0' in numeric constants as denoting -an octal number, and a leading `0x' as denoting hexadecimal. This is -in accordance with the POSIX.2 spec, section 2.9.2.1, which states that -arithmetic constants should be handled as signed long integers as defined -by the ANSI/ISO C standard. - -The POSIX.2 interpretation committee has confirmed this: - -http://www.pasc.org/interps/unofficial/db/p1003.2/pasc-1003.2-173.html - -E9) Why does the pattern matching expression [A-Z]* match files beginning - with every letter except `z'? - -Bash-2.03, Bash-2.05 and later versions honor the current locale setting -when processing ranges within pattern matching bracket expressions ([A-Z]). -This is what POSIX.2 and SUSv3/XPG6 specify. - -The behavior of the matcher in bash-2.05 and later versions depends on the -current LC_COLLATE setting. Setting this variable to `C' or `POSIX' will -result in the traditional behavior ([A-Z] matches all uppercase ASCII -characters). Many other locales, including the en_US locale (the default -on many US versions of Linux) collate the upper and lower case letters like -this: - - AaBb...Zz - -which means that [A-Z] matches every letter except `z'. Others collate like - - aAbBcC...zZ - -which means that [A-Z] matches every letter except `a'. - -The portable way to specify upper case letters is [:upper:] instead of -A-Z; lower case may be specified as [:lower:] instead of a-z. - -Look at the manual pages for setlocale(3), strcoll(3), and, if it is -present, locale(1). If you have locale(1), you can use it to find -your current locale information even if you do not have any of the -LC_ variables set. - -My advice is to put - - export LC_COLLATE=C - -into /etc/profile and inspect any shell scripts run from cron for -constructs like [A-Z]. This will prevent things like - - rm [A-Z]* - -from removing every file in the current directory except those beginning -with `z' and still allow individual users to change the collation order. -Users may put the above command into their own profiles as well, of course. - -E10) Why does `cd //' leave $PWD as `//'? - -POSIX.2, in its description of `cd', says that *three* or more leading -slashes may be replaced with a single slash when canonicalizing the -current working directory. - -This is, I presume, for historical compatibility. Certain versions of -Unix, and early network file systems, used paths of the form -//hostname/path to access `path' on server `hostname'. - -E11) If I resize my xterm while another program is running, why doesn't bash - notice the change? - -This is another issue that deals with job control. - -The kernel maintains a notion of a current terminal process group. Members -of this process group (processes whose process group ID is equal to the -current terminal process group ID) receive terminal-generated signals like -SIGWINCH. (For more details, see the JOB CONTROL section of the bash -man page.) - -If a terminal is resized, the kernel sends SIGWINCH to each member of -the terminal's current process group (the `foreground' process group). - -When bash is running with job control enabled, each pipeline (which may be -a single command) is run in its own process group, different from bash's -process group. This foreground process group receives the SIGWINCH; bash -does not. Bash has no way of knowing that the terminal has been resized. - -There is a `checkwinsize' option, settable with the `shopt' builtin, that -will cause bash to check the window size and adjust its idea of the -terminal's dimensions each time a process stops or exits and returns control -of the terminal to bash. Enable it with `shopt -s checkwinsize'. - -Section F: Things to watch out for on certain Unix versions - -F1) Why can't I use command line editing in my `cmdtool'? - -The problem is `cmdtool' and bash fighting over the input. When -scrolling is enabled in a cmdtool window, cmdtool puts the tty in -`raw mode' to permit command-line editing using the mouse for -applications that cannot do it themselves. As a result, bash and -cmdtool each try to read keyboard input immediately, with neither -getting enough of it to be useful. - -This mode also causes cmdtool to not implement many of the -terminal functions and control sequences appearing in the -`sun-cmd' termcap entry. For a more complete explanation, see -that file examples/suncmd.termcap in the bash distribution. - -`xterm' is a better choice, and gets along with bash much more -smoothly. - -If you must use cmdtool, you can use the termcap description in -examples/suncmd.termcap. Set the TERMCAP variable to the terminal -description contained in that file, i.e. - -TERMCAP='Mu|sun-cmd:am:bs:km:pt:li#34:co#80:cl=^L:ce=\E[K:cd=\E[J:rs=\E[s:' - -Then export TERMCAP and start a new cmdtool window from that shell. -The bash command-line editing should behave better in the new -cmdtool. If this works, you can put the assignment to TERMCAP -in your bashrc file. - -F2) I built bash on Solaris 2. Why do globbing expansions and filename - completion chop off the first few characters of each filename? - -This is the consequence of building bash on SunOS 5 and linking -with the libraries in /usr/ucblib, but using the definitions -and structures from files in /usr/include. - -The actual conflict is between the dirent structure in -/usr/include/dirent.h and the struct returned by the version of -`readdir' in libucb.a (a 4.3-BSD style `struct direct'). - -Make sure you've got /usr/ccs/bin ahead of /usr/ucb in your $PATH -when configuring and building bash. This will ensure that you -use /usr/ccs/bin/cc or acc instead of /usr/ucb/cc and that you -link with libc before libucb. - -If you have installed the Sun C compiler, you may also need to -put /usr/ccs/bin and /opt/SUNWspro/bin into your $PATH before -/usr/ucb. - -F3) Why does bash dump core after I interrupt username completion or - `~user' tilde expansion on a machine running NIS? - -This is a famous and long-standing bug in the SunOS YP (sorry, NIS) -client library, which is part of libc. - -The YP library code keeps static state -- a pointer into the data -returned from the server. When YP initializes itself (setpwent), -it looks at this pointer and calls free on it if it's non-null. -So far, so good. - -If one of the YP functions is interrupted during getpwent (the -exact function is interpretwithsave()), and returns NULL, the -pointer is freed without being reset to NULL, and the function -returns. The next time getpwent is called, it sees that this -pointer is non-null, calls free, and the bash free() blows up -because it's being asked to free freed memory. - -The traditional Unix mallocs allow memory to be freed multiple -times; that's probably why this has never been fixed. You can -run configure with the `--without-gnu-malloc' option to use -the C library malloc and avoid the problem. - -F4) I'm running SVR4.2. Why is the line erased every time I type `@'? - -The `@' character is the default `line kill' character in most -versions of System V, including SVR4.2. You can change this -character to whatever you want using `stty'. For example, to -change the line kill character to control-u, type - - stty kill ^U - -where the `^' and `U' can be two separate characters. - -F5) Why does bash report syntax errors when my C News scripts use a - redirection before a subshell command? - -The actual command in question is something like - - < file ( command ) - -According to the grammar given in the POSIX.2 standard, this construct -is, in fact, a syntax error. Redirections may only precede `simple -commands'. A subshell construct such as the above is one of the shell's -`compound commands'. A redirection may only follow a compound command. - -This affects the mechanical transformation of commands that use `cat' -to pipe a file into a command (a favorite Useless-Use-Of-Cat topic on -comp.unix.shell). While most commands of the form - - cat file | command - -can be converted to `< file command', shell control structures such as -loops and subshells require `command < file'. - -The file CWRU/sh-redir-hack in the bash-2.05a distribution is an -(unofficial) patch to parse.y that will modify the grammar to -support this construct. It will not apply with `patch'; you must -modify parse.y by hand. Note that if you apply this, you must -recompile with -DREDIRECTION_HACK. This introduces a large -number of reduce/reduce conflicts into the shell grammar. - -F6) Why can't I use vi-mode editing on Red Hat Linux 6.1? - -The short answer is that Red Hat screwed up. - -The long answer is that they shipped an /etc/inputrc that only works -for emacs mode editing, and then screwed all the vi users by setting -INPUTRC to /etc/inputrc in /etc/profile. - -The short fix is to do one of the following: remove or rename -/etc/inputrc, set INPUTRC=~/.inputrc in ~/.bashrc (or .bash_profile, -but make sure you export it if you do), remove the assignment to -INPUTRC from /etc/profile, add - - set keymap emacs - -to the beginning of /etc/inputrc, or bracket the key bindings in -/etc/inputrc with these lines - - $if mode=emacs - [...] - $endif - -F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on - HP/UX 11.x? - -HP/UX's support for long double is imperfect at best. - -GCC will support it without problems, but the HP C library functions -like strtold(3) and printf(3) don't actually work with long doubles. -HP implemented a `long_double' type as a 4-element array of 32-bit -ints, and that is what the library functions use. The ANSI C -`long double' type is a 128-bit floating point scalar. - -The easiest fix, until HP fixes things up, is to edit the generated -config.h and #undef the HAVE_LONG_DOUBLE line. After doing that, -the compilation should complete successfully. - -Section G: How can I get bash to do certain common things? - -G1) How can I get bash to read and display eight-bit characters? - -This is a process requiring several steps. - -First, you must ensure that the `physical' data path is a full eight -bits. For xterms, for example, the `vt100' resources `eightBitInput' -and `eightBitOutput' should be set to `true'. - -Once you have set up an eight-bit path, you must tell the kernel and -tty driver to leave the eighth bit of characters alone when processing -keyboard input. Use `stty' to do this: - - stty cs8 -istrip -parenb - -For old BSD-style systems, you can use - - stty pass8 - -You may also need - - stty even odd - -Finally, you need to tell readline that you will be inputting and -displaying eight-bit characters. You use readline variables to do -this. These variables can be set in your .inputrc or using the bash -`bind' builtin. Here's an example using `bind': - - bash$ bind 'set convert-meta off' - bash$ bind 'set meta-flag on' - bash$ bind 'set output-meta on' - -The `set' commands between the single quotes may also be placed -in ~/.inputrc. - -G2) How do I write a function `x' to replace builtin command `x', but - still invoke the command from within the function? - -This is why the `command' and `builtin' builtins exist. The -`command' builtin executes the command supplied as its first -argument, skipping over any function defined with that name. The -`builtin' builtin executes the builtin command given as its first -argument directly. - -For example, to write a function to replace `cd' that writes the -hostname and current directory to an xterm title bar, use -something like the following: - - cd() - { - builtin cd "$@" && xtitle "$HOST: $PWD" - } - -This could also be written using `command' instead of `builtin'; -the version above is marginally more efficient. - -G3) How can I find the value of a shell variable whose name is the value - of another shell variable? - -Versions of Bash newer than Bash-2.0 support this directly. You can use - - ${!var} - -For example, the following sequence of commands will echo `z': - - var1=var2 - var2=z - echo ${!var1} - -For sh compatibility, use the `eval' builtin. The important -thing to remember is that `eval' expands the arguments you give -it again, so you need to quote the parts of the arguments that -you want `eval' to act on. - -For example, this expression prints the value of the last positional -parameter: - - eval echo \"\$\{$#\}\" - -The expansion of the quoted portions of this expression will be -deferred until `eval' runs, while the `$#' will be expanded -before `eval' is executed. In versions of bash later than bash-2.0, - - echo ${!#} - -does the same thing. - -This is not the same thing as ksh93 `nameref' variables, though the syntax -is similar. I may add namerefs in a future bash version. - -G4) How can I make the bash `time' reserved word print timing output that - looks like the output from my system's /usr/bin/time? - -The bash command timing code looks for a variable `TIMEFORMAT' and -uses its value as a format string to decide how to display the -timing statistics. - -The value of TIMEFORMAT is a string with `%' escapes expanded in a -fashion similar in spirit to printf(3). The manual page explains -the meanings of the escape sequences in the format string. - -If TIMEFORMAT is not set, bash acts as if the following assignment had -been performed: - - TIMEFORMAT=$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS' - -The POSIX.2 default time format (used by `time -p command') is - - TIMEFORMAT=$'real %2R\nuser %2U\nsys %2S' - -The BSD /usr/bin/time format can be emulated with: - - TIMEFORMAT=$'\t%1R real\t%1U user\t%1S sys' - -The System V /usr/bin/time format can be emulated with: - - TIMEFORMAT=$'\nreal\t%1R\nuser\t%1U\nsys\t%1S' - -The ksh format can be emulated with: - - TIMEFORMAT=$'\nreal\t%2lR\nuser\t%2lU\nsys\t%2lS' - -G5) How do I get the current directory into my prompt? - -Bash provides a number of backslash-escape sequences which are expanded -when the prompt string (PS1 or PS2) is displayed. The full list is in -the manual page. - -The \w expansion gives the full pathname of the current directory, with -a tilde (`~') substituted for the current value of $HOME. The \W -expansion gives the basename of the current directory. To put the full -pathname of the current directory into the path without any tilde -subsitution, use $PWD. Here are some examples: - - PS1='\w$ ' # current directory with tilde - PS1='\W$ ' # basename of current directory - PS1='$PWD$ ' # full pathname of current directory - -The single quotes are important in the final example to prevent $PWD from -being expanded when the assignment to PS1 is performed. - -G6) How can I rename "*.foo" to "*.bar"? - -Use the pattern removal functionality described in D3. The following `for' -loop will do the trick: - - for f in *.foo; do - mv $f ${f%foo}bar - done - -G7) How can I translate a filename from uppercase to lowercase? - -The script examples/functions/lowercase, originally written by John DuBois, -will do the trick. The converse is left as an exercise. - -G8) How can I write a filename expansion (globbing) pattern that will match - all files in the current directory except "." and ".."? - -You must have set the `extglob' shell option using `shopt -s extglob' to use -this: - - echo .!(.|) * - -A solution that works without extended globbing is given in the Unix Shell -FAQ, posted periodically to comp.unix.shell. - -Section H: Where do I go from here? - -H1) How do I report bugs in bash, and where should I look for fixes and - advice? - -Use the `bashbug' script to report bugs. It is built and -installed at the same time as bash. It provides a standard -template for reporting a problem and automatically includes -information about your configuration and build environment. - -`bashbug' sends its reports to bug-bash@gnu.org, which -is a large mailing list gatewayed to the usenet newsgroup gnu.bash.bug. - -Bug fixes, answers to questions, and announcements of new releases -are all posted to gnu.bash.bug. Discussions concerning bash features -and problems also take place there. - -To reach the bash maintainers directly, send mail to -bash-maintainers@gnu.org. - -H2) What kind of bash documentation is there? - -First, look in the doc directory in the bash distribution. It should -contain at least the following files: - -bash.1 an extensive, thorough Unix-style manual page -builtins.1 a manual page covering just bash builtin commands -bashref.texi a reference manual in GNU tex`info format -bashref.info an info version of the reference manual -FAQ this file -article.ms text of an article written for The Linux Journal -readline.3 a man page describing readline - -Postscript, HTML, and ASCII files created from the above source are -available in the documentation distribution. - -There is additional documentation available for anonymous FTP from host -ftp.cwru.edu in the `pub/bash' directory. - -Cameron Newham and Bill Rosenblatt have written a book on bash, published -by O'Reilly and Associates. The book is based on Bill Rosenblatt's Korn -Shell book. The title is ``Learning the Bash Shell'', and the ISBN number -is 1-56592-147-X. Look for it in fine bookstores near you. This book -covers bash-1.14, but has an appendix describing some of the new features -in bash-2.0. - -A second edition of this book is available, published in January, 1998. -The ISBN number is 1-56592-347-2. Look for it in the same fine bookstores -or on the web. - -The GNU Bash Reference Manual has been published as a printed book by -Network Theory Ltd (Paperback, ISBN: 0-9541617-7-7, Feb 2003). It covers -bash-2.0 and is available from most online bookstores (see -http://www.network-theory.co.uk/bash/manual/ for details). The publisher -will donate $1 to the Free Software Foundation for each copy sold. - -H3) What's coming in future versions? - -These are features I hope to include in a future version of bash. - -a better bash debugger (a minimally-tested version is included with bash-2.05b) -associative arrays -co-processes, but with a new-style syntax that looks like function declaration - -H4) What's on the bash `wish list' for future versions? - -These are features that may or may not appear in a future version of bash. - -breaking some of the shell functionality into embeddable libraries -a module system like zsh's, using dynamic loading like builtins -better internationalization using GNU `gettext' -date-stamped command history -a bash programmer's guide with a chapter on creating loadable builtins -a better loadable interface to perl with access to the shell builtins and - variables (contributions gratefully accepted) -ksh93-like `nameref' variables -ksh93-like `+=' variable assignment operator -ksh93-like `xx.yy' variables (including some of the .sh.* variables) and - associated disipline functions -Some of the new ksh93 pattern matching operators, like backreferencing - -H5) When will the next release appear? - -The next version will appear sometime in 2002. Never make predictions. - - -This document is Copyright 1995-2003 by Chester Ramey. - -Permission is hereby granted, without written agreement and -without license or royalty fees, to use, copy, and distribute -this document for any purpose, provided that the above copyright -notice appears in all copies of this document and that the -contents of this document remain unaltered. diff --git a/examples/loadables/Makefile.in.save b/examples/loadables/Makefile.in.save deleted file mode 100644 index f6208f5cc..000000000 --- a/examples/loadables/Makefile.in.save +++ /dev/null @@ -1,238 +0,0 @@ -# -# Simple makefile for the sample loadable builtins -# -# Copyright (C) 1996 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA. - -# Include some boilerplate Gnu makefile definitions. -prefix = @prefix@ - -exec_prefix = @exec_prefix@ -bindir = @bindir@ -libdir = @libdir@ -infodir = @infodir@ -includedir = @includedir@ - -topdir = @top_srcdir@ -BUILD_DIR = @BUILD_DIR@ -srcdir = @srcdir@ -VPATH = .:@srcdir@ - -@SET_MAKE@ -CC = @CC@ -RM = rm -f - -SHELL = @MAKE_SHELL@ - -host_os = @host_os@ -host_cpu = @host_cpu@ -host_vendor = @host_vendor@ - -CFLAGS = @CFLAGS@ -LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DEFS = @DEFS@ -LOCAL_DEFS = @LOCAL_DEFS@ - -CPPFLAGS = @CPPFLAGS@ - -BASHINCDIR = ${topdir}/include - -LIBBUILD = ${BUILD_DIR}/lib - -INTL_LIBSRC = ${topdir}/lib/intl -INTL_BUILDDIR = ${LIBBUILD}/intl -INTL_INC = @INTL_INC@ -LIBINTL_H = @LIBINTL_H@ - -CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(LOCAL_CFLAGS) $(CFLAGS) - -# -# These values are generated for configure by ${topdir}/support/shobj-conf. -# If your system is not supported by that script, but includes facilities for -# dynamic loading of shared objects, please update the script and send the -# changes to bash-maintainers@gnu.org. -# -SHOBJ_CC = @SHOBJ_CC@ -SHOBJ_CFLAGS = @SHOBJ_CFLAGS@ -SHOBJ_LD = @SHOBJ_LD@ -SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@ -SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@ -SHOBJ_LIBS = @SHOBJ_LIBS@ -SHOBJ_STATUS = @SHOBJ_STATUS@ - -INC = -I. -I.. -I$(topdir) -I$(topdir)/lib -I$(topdir)/builtins \ - -I$(BASHINCDIR) -I$(BUILD_DIR) -I$(LIBBUILD) \ - -I$(BUILD_DIR)/builtins $(INTL_INC) - -.c.o: - $(SHOBJ_CC) $(SHOBJ_CFLAGS) $(CCFLAGS) $(INC) -c -o $@ $< - - -ALLPROG = print truefalse sleep pushd finfo logname basename dirname \ - tty pathchk tee head mkdir rmdir printenv id whoami \ - uname sync push ln unlink cut realpath getconf strftime -OTHERPROG = necho hello cat - -all: $(SHOBJ_STATUS) - -supported: $(ALLPROG) -others: $(OTHERPROG) - -unsupported: - @echo "Your system (${host_os}) is not supported by the" - @echo "${topdir}/support/shobj-conf script." - @echo "If your operating system provides facilities for dynamic" - @echo "loading of shared objects using the dlopen(3) interface," - @echo "please update the script and re-run configure. - @echo "Please send the changes you made to bash-maintainers@gnu.org" - @echo "for inclusion in future bash releases." - -everything: supported others - -print: print.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ print.o $(SHOBJ_LIBS) - -necho: necho.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ necho.o $(SHOBJ_LIBS) - -getconf: getconf.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ getconf.o $(SHOBJ_LIBS) - -hello: hello.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ hello.o $(SHOBJ_LIBS) - -truefalse: truefalse.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ truefalse.o $(SHOBJ_LIBS) - -sleep: sleep.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sleep.o $(SHOBJ_LIBS) - -finfo: finfo.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ finfo.o $(SHOBJ_LIBS) - -cat: cat.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cat.o $(SHOBJ_LIBS) - -logname: logname.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ logname.o $(SHOBJ_LIBS) - -basename: basename.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ basename.o $(SHOBJ_LIBS) - -dirname: dirname.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ dirname.o $(SHOBJ_LIBS) - -tty: tty.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tty.o $(SHOBJ_LIBS) - -pathchk: pathchk.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pathchk.o $(SHOBJ_LIBS) - -tee: tee.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tee.o $(SHOBJ_LIBS) - -mkdir: mkdir.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mkdir.o $(SHOBJ_LIBS) - -rmdir: rmdir.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ rmdir.o $(SHOBJ_LIBS) - -head: head.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ head.o $(SHOBJ_LIBS) - -printenv: printenv.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ printenv.o $(SHOBJ_LIBS) - -id: id.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ id.o $(SHOBJ_LIBS) - -whoami: whoami.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ whoami.o $(SHOBJ_LIBS) - -uname: uname.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ uname.o $(SHOBJ_LIBS) - -sync: sync.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sync.o $(SHOBJ_LIBS) - -push: push.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ push.o $(SHOBJ_LIBS) - -ln: ln.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ ln.o $(SHOBJ_LIBS) - -unlink: unlink.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ unlink.o $(SHOBJ_LIBS) - -cut: cut.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cut.o $(SHOBJ_LIBS) - -realpath: realpath.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ realpath.o $(SHOBJ_LIBS) - -strftime: strftime.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ strftime.o $(SHOBJ_LIBS) - -# pushd is a special case. We use the same source that the builtin version -# uses, with special compilation options. -# -pushd.c: ${topdir}/builtins/pushd.def - $(RM) $@ - ${BUILD_DIR}/builtins/mkbuiltins -D ${topdir}/builtins ${topdir}/builtins/pushd.def - -pushd.o: pushd.c - $(RM) $@ - $(SHOBJ_CC) -DHAVE_CONFIG_H -DPUSHD_AND_POPD -DLOADABLE_BUILTIN $(SHOBJ_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(INC) -c -o $@ $< - -pushd: pushd.o - $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pushd.o $(SHOBJ_LIBS) - -clean: - $(RM) $(ALLPROG) $(OTHERPROG) *.o - -( cd perl && ${MAKE} ${MFLAGS} $@ ) - -mostlyclean: clean - -( cd perl && ${MAKE} ${MFLAGS} $@ ) - -distclean maintainer-clean: clean - $(RM) Makefile pushd.c - -( cd perl && ${MAKE} ${MFLAGS} $@ ) - -print.o: print.c -truefalse.o: truefalse.c -sleep.o: sleep.c -finfo.o: finfo.c -logname.o: logname.c -basename.o: basename.c -dirname.o: dirname.c -tty.o: tty.c -pathchk.o: pathchk.c -tee.o: tee.c -head.o: head.c -rmdir.o: rmdir.c -necho.o: necho.c -getconf.o: getconf.c -hello.o: hello.c -cat.o: cat.c -printenv.o: printenv.c -id.o: id.c -whoami.o: whoami.c -uname.o: uname.c -sync.o: sync.c -push.o: push.c -mkdir.o: mkdir.c -realpath.o: realpath.c -strftime.o: strftime.c diff --git a/lib/readline/doc/Makefile.old b/lib/readline/doc/Makefile.old deleted file mode 100644 index 58d4dd762..000000000 --- a/lib/readline/doc/Makefile.old +++ /dev/null @@ -1,76 +0,0 @@ -# This makefile for Readline library documentation is in -*- text -*- mode. -# Emacs likes it that way. -RM = rm -f - -MAKEINFO = makeinfo -TEXI2DVI = texi2dvi -TEXI2HTML = texi2html -QUIETPS = #set this to -q to shut up dvips -DVIPS = dvips -D 300 $(QUIETPS) -o $@ # tricky - -INSTALL_DATA = cp -infodir = /usr/local/info - -RLSRC = rlman.texinfo rluser.texinfo rltech.texinfo -HISTSRC = hist.texinfo hsuser.texinfo hstech.texinfo - -DVIOBJ = readline.dvi history.dvi -INFOOBJ = readline.info history.info -PSOBJ = readline.ps history.ps -HTMLOBJ = readline.html history.html - -all: info dvi html ps -nodvi: info html - -readline.dvi: $(RLSRC) - $(TEXI2DVI) rlman.texinfo - mv rlman.dvi readline.dvi - -readline.info: $(RLSRC) - $(MAKEINFO) --no-split -o $@ rlman.texinfo - -history.dvi: ${HISTSRC} - $(TEXI2DVI) hist.texinfo - mv hist.dvi history.dvi - -history.info: ${HISTSRC} - $(MAKEINFO) --no-split -o $@ hist.texinfo - -readline.ps: readline.dvi - $(RM) $@ - $(DVIPS) readline.dvi - -history.ps: history.dvi - $(RM) $@ - $(DVIPS) history.dvi - -readline.html: ${RLSRC} - $(TEXI2HTML) rlman.texinfo - sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman.html > readline.html - sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman_toc.html > readline_toc.html - $(RM) rlman.html rlman_toc.html - -history.html: ${HISTSRC} - $(TEXI2HTML) hist.texinfo - sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist.html > history.html - sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist_toc.html > history_toc.html - $(RM) hist.html hist_toc.html - -info: $(INFOOBJ) -dvi: $(DVIOBJ) -ps: $(PSOBJ) -html: $(HTMLOBJ) - -clean: - $(RM) *.aux *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps *.pgs \ - *.fns *.kys *.tps *.vrs *.o core - -distclean: clean -mostlyclean: clean - -maintainer-clean: clean - $(RM) *.dvi *.info *.info-* *.ps *.html - -install: info - ${INSTALL_DATA} readline.info $(infodir)/readline.info - ${INSTALL_DATA} history.info $(infodir)/history.info diff --git a/tests/misc/regress/log.orig b/tests/misc/regress/log.orig deleted file mode 100644 index c1f1e1991..000000000 --- a/tests/misc/regress/log.orig +++ /dev/null @@ -1,50 +0,0 @@ -:; ./shx - -sh: -<&$fd ok -nlbq Mon Aug 3 02:45:00 EDT 1992 -bang geoff -quote 712824302 -setbq defmsgid=<1992Aug3.024502.6176@host> -bgwait sleep done... wait 6187 - - -bash: -<&$fd ok -nlbq Mon Aug 3 02:45:09 EDT 1992 -bang geoff -quote 712824311 -setbq defmsgid=<1992Aug3.024512.6212@host> -bgwait sleep done... wait 6223 - - -ash: -<&$fd shx1: 4: Syntax error: Bad fd number -nlbq Mon Aug 3 02:45:19 EDT 1992 -bang geoff -quote getdate: `"now"' not a valid date - -setbq defmsgid=<1992Aug3.` echo 024521 -bgwait sleep done... wait 6241 - - -ksh: -<&$fd ok -nlbq ./shx: 6248 Memory fault - core dumped -bang geoff -quote getdate: `"now"' not a valid date - -setbq defmsgid=<1992Aug3.024530.6257@host> -bgwait no such job: 6265 -wait 6265 -sleep done... - -zsh: -<&$fd ok -nlbq Mon Aug 3 02:45:36 EDT 1992 -bang shx3: event not found: /s/ [4] -quote 712824337 -setbq defmsgid=<..6290@host> -bgwait shx7: unmatched " [9] -sleep done... -:; diff --git a/tests/misc/regress/shx.orig b/tests/misc/regress/shx.orig deleted file mode 100644 index 4b3bf2b82..000000000 --- a/tests/misc/regress/shx.orig +++ /dev/null @@ -1,10 +0,0 @@ -#! /bin/sh -for cmd in sh bash ash ksh zsh -do - echo - echo $cmd: - for demo in shx? - do - $cmd $demo - done -done